...is constant. So, the formula of this law is: V1/T1 = V2/T2 (Charles’s Law) Hypothesis: If the temperature of the gas within the syringe is decreased, then the volume of this gas will be decreased. Materials: Thermometer, three syringes, pen Methods of testing: First of all, we recorded the temperature (in Celsius) and the volume of the gases within the 3 syringes (in cc). We noted the recorded data in a table. Then, we let these three syringes in a freezer for two days at temperature -20 Celsius. After two days, we removed the syringe from the freezer and recorded the temperature and the volume of the gas. Results: V1 T1 K1 V2 T2 K2 Sample 1 54 25 0.000181 48 -14 0.000185 Sample 2 53 25 0.000177 49 -14 0.000189 Sample 3 50 25 0.000168 46 -14 0.000178 Volume is shown in mL (milliliter). 1cc=1mL Temperature is expressed in Celsius. According to Charles’s Law, k =V/T 54 mL x 1/1000 L/mL = 0.054 L 48 mL x 1/1000 L/mL = 0.048 L 53 mL x 1/1000L/mL = 0.053 L 49 mL x 1/1000 L/mL = 0.049 L 50 mL x 1/1000L/mL = 0.050 L 46 mL x 1/1000 L/mL = 0.046 L 25 + 273K = 298 K -14 + 273 K = 259 K K1= 0.054/298 = 0.000181 0.048/259 = 0.000185 0.053/298 = 0.000177 0.049/259 = 0.000189 0.050/298 = 0.0001678 0.046/259 = 0.000178 Discussion and Conclusion: The...
Words: 1134 - Pages: 5
...| | Fixed Marketing and distribution Cost per unit | $19.00 | | | $14.50 | | Total Cost per unit | | $135.00 | | | $131.50 | Operating income per unit | | $15.00 | | | $18.50 | Production Rate per day | | 400 units | | | 320 units | Normal annual capacity usage | | 240 days | | | 240 days | Maximum annual capacity | | 300 days | | | 300 days | All unit fixed costs are calculated based on a normal year of 240 working days. When the number of working days exceeds 240,variable manufacturing costs increase by $3.00 per unit in Polly and $8.00 per unit in Maddy. Pam Engines is expected to produce and sell 192,000 generators during the coming year. Wanting to maximize the higher unit profit at Maddy, Pam Engines' production manager has decided to manufacture 96,000 units at each plant. This production plan results in Maddy operating at capacity (320 units per day 300 day) and Polly operating at its normal volume (400 units per day 240 days). Required: 1. Determine the breakeven point for the Polly and Maddy plants in units. (6 marks) Breakeven Point = Fixed Costs/CM | | | | | | | | | | CM = Selling price - Variable Costs | | | | | | Polly at 240 Days | | Maddy at 240 Days | Maddy Incremental 60 Days | Production | 96,000 | | 76,800 | 19,200 | | |...
Words: 2206 - Pages: 9
...29 39 49 59 c d b c d c 10 20 30 40 50 60 d b c c a d Page 1 Unproctored Mock-1 2013 1. b 1! + 2 × 2! + 3 × 3! + 4 × 4! +…+ 12 × 12! = (2! – 1!) + (3! – 2!) + (4! – 3!) +…+ (13! – 12!) = 13! – 1 So the remainder = –1 i.e. 12 Let the smallest number be x and the three equal numbers be y. Then, x + 3y + x + 100 = 150 5 4. a A 2. b 3 y 2 Hence, y can take only even values. ⇒ 2x + 3y = 650 ⇒ x = 325 − 2 3 cm Also, 325 − 3 3 y < y < 325 − y + 100 2 2 B D 4 cm 6 0° F E C 3 y < 425 2 ⇒ 130 < y < 170 As y is even, the number of possible values of y ⇒ 325 < y + 168 − 132 + 1 = 19 2 Hence, the number of different possible values of the largest number i.e. (x + 100) is also 19. = 3. c Let the number of boys be x and the number of girls in the class be y. From statement A: x = 2y + 5 We cannot find the exact values of x and y. Hence, Statement A alone is not sufficient. From statement B: 0.4x = y We cannot find the exact values of x and y. Hence, Statement B alone is not sufficient. From statements A and B: Solving, we get x = 25 and y = 10. So the total number of students in the class = 35 Hence, both the statements together are required to answer the question. Let’s draw AF perpendicular to BC. In ∆ADE, as AD = AE ∠AED = ∠ADE = 60° ⇒ ∠DAE = 60° Hence, we can conclude that ∆ADE is an equilateral triangle. ⇒ AF = 3 × 4 = 2 3 cm and DF = FE = 2 cm 2 In ∆ABF, using Pythagoras’ Theorem, AB = AF2 + BF2 = (2 3)2 + 42 = 2 7 cm. 5....
Words: 1779 - Pages: 8
...formulae page will gain NO credit. Area of trapezium = (a + b)h Volume of prism = area of cross section × length -2- PiXL Club Question 1 (a) Write down the mathematical name for each of these 3-D shapes. (3) (b) Here is a solid prism made from centimetre cubes. Find the volume of the prism. …………………….. cm 3 (1) (Total 4 marks) -3- PiXL Club Question 2 Impossible Unlikely Even chance Likely Certain From the words above, choose what best describes the probability. (a) that the sun will shine in July next year in London, ………………………………… (1) (b) that the next baby to be born will be a boy, ………………………………… (1) (c) that these will be 50 days next month. ………………………………… (1) (Total 3 marks) -4- PiXL Club Question 3 (a) Work out 5 2 …………………………… (1) (b) Find the square root of 3.24 …………………………… (1) (Total 2 marks) -5- PiXL Club Question 4 (a) Write down the temperature shown on each of these thermometers. (i) …………………………….. °C (ii) …………………………….. °C (2) -6- PiXL Club The table shows the temperatures, in London, at different times on New Years Day, 2008. Time of Day Temperature 6am -3°C 10am 0°C Noon 2°C 2pm 5°C 6pm 4°C 10pm -1°C (b) Write down the lowest temperature. ………………………… °C (1) (c) Work out the difference in temperature between 6pm and 10pm. ………………………… °C (1) (Total 4 marks) -7- PiXL Club Question 5 Diagram NOT...
Words: 927 - Pages: 4
...protective shell-like barrier that surrounds the ovum. The first sperm that penetrates fully into the egg donates its genetic material (DNA). The egg then polarizes, repelling any additional sperm. The resulting combination is called a zygote, a new and genetically unique human organism. The term "conception" refers variably to either fertilization or to formation of the conceptus after uterine implantation, and this terminology is controversial. 3 Stages of Prenatal Germinal stage Embryonic stage Fetal stage Embryonic stage The embryonic period in humans begins at fertilization (penetration of the egg by the sperm) and continues until the end of the 10th week of gestation (8th week by embryonic age). The embryo spends the next few days traveling down the Fallopian tube. It starts out as a single cell zygote and then divides several times to form a ball of cells called a morula. Further cellular division is accompanied by the formation of a small cavity between the cells. This stage is called a blastocyst. Up to this point there is no growth in the overall size of the embryo, as it is confined within a glycoprotein shell, known as the zona pellucida. Instead, each division produces successively smaller cells. Changes by weeks of gestation Gestational age vs. embryonic age Gestational age is the time that has passed since the onset of the last...
Words: 2154 - Pages: 9
...dealers and customers, while streamlining site management Summary Suzuki Motor Corporation (SMC) founded The Motorcycle and ATV Division of American Suzuki Motor Corporation (ASMC), Brea, CA, in 1963. ASMC markets motorcycles,ATVs and Scooters via an extensive dealer network throughout 49 states. ASMC’s parent company, Suzuki Motor Corporation, based in Hamamatsu, Japan, is a diversified worldwide manufacturer of motorcycles, ATVs, scooters, automobiles and marine engines. Founded in 1909 and incorporated in 1920, it has 120 distributors in 191 countries. When Suzuki needed an updated web experience and more control over their content they looked to their agency of record, Questus, who recommended Sitecore. Challenge The purpose of Suzuki’s site is to market their products and drive customers to their local dealers. The dealers are the ones selling the Suzuki products, so it’s important for Suzuki to keep their dealers happy. • Dealer Locator – a tool to help end users find the dealer nearest them • Dealer Center - A place for dealers to access all of the latest promotions and participate in dealer-only programs Previously, Suzuki was using an aging home-grown CMS to manage their web content. However, the interface wasn’t user friendly and it required a developer to make any changes to the content, which was costly and time-consuming, not to mention error-prone. E-commerce and promotions were also a challenge to manage on the previous site. ...
Words: 1338 - Pages: 6
...Write your name here Surname Other names Pearson Edexcel GCSE Centre Number Candidate Number 2015 Predicted Paper 2 Higher Tier Time: 1 hour 45 minutes Paper Reference 1MA0/2H You must have: Ruler graduated in centimetres and millimetres, protractor, pair of compasses, pen, HB pencil, eraser, calculator. Tracing paper may be used. Total Marks Instructions Use black ink or ball-point pen. Fill in the boxes at the top of this page with your name, centre number and candidate number. Answer all questions. Answer the questions in the spaces provided – there may be more space than you need. Calculators may be used. If your calculator does not have a button, take the value of to be 3.142 unless the question instructs otherwise. Information The total mark for this paper is 100 The marks for each question are shown in brackets – use this as a guide as to how much time to spend on each question. Questions labelled with an asterisk (*) are ones where the quality of your written communication will be assessed. Advice Read each question carefully before you start to answer it. Keep an eye on the time. Try to answer every question. Check your answers if you have time at the end. mathsgenie.co.uk GCSE Mathematics 1MA0 Formulae: Higher Tier You must not write on this formulae page. Anything you write on this formulae page will gain NO credit. Volume of prism = area of cross section × length Area of trapezium = 1 (a...
Words: 1805 - Pages: 8
...The hypothesis and the objective of the study were to decide whether the Morris water maze is able to be suitable for assessing spatial learning and memory in weanling mice. Methods The subjects that were used were weanling mice. The techniques or procedures that they used in order to collect the data was by using the Morris water maze, which was experimented in a circular pool 49 cm around and 31 cm deep. The pool was filled to a depth of 30 cm with water made opaque with white non-toxic water-based tempura paint (Barnhart, 2015; Yang, 2015; Lein, 2015). The escape platform was positioned in the middle of one section of the pool and stayed in the same spot throughout the learning trials and as well as the visual cue tests. During the probe test, the platform in the pool was then removed. The mice were recorded simultaneously by the SMART digital tracking system and were tested between trials interval per day with two trials each for approximately 30 mins. All of the testing was managed at similar times roughly of each day in order to reduce variability in the performance due to the effect of the time of day. Results In the results, the authors main findings were that 1) Weanling mice displayed spatial and learning memory with the Morris water maze training, 2) There was no differences in the sex of the mice, meaning that the sex of mice did not matter in how well the mice succeeded in the experiment. And lastly, 3) the Morris water maze training raises transcript levels of genes...
Words: 931 - Pages: 4
...Materials Engineer Test Reviewer 1. Scales for weighing aggregates and cement shall be accurate within ____ % throughout the range of use. Scales shall be inspected and sealed as often as the Engineer may deem necessary to assure their continued accuracy. a) 1.0 % c) 0.5 % b) 1.5 % d) 2.0 % 2. When cement is placed in contact with the aggregate, batches may be rejected unless mixed within _____ hours of such contact. a) 1.5 hours c) 0.5 hours b) 2.0 hours d) 2.5 hours 3. When mixed at the site or in a central mixing plant, the mixing time shall not be less than ______ nor more than ____ unless mixer performance test prove adequate mixing of concrete in a shorter time period. a) 30 seconds nor more than 90 seconds b) 50 seconds nor more than 90 seconds c) 60 seconds nor more than 120 seconds d) 90 seconds nor more than 120 seconds 4. The flow of water shall be uniform and all water should be in the drum by the end of the first ____ seconds of the mixing period. a) 45 seconds c) 15 seconds b) 30 seconds d) 20 seconds 5. Concrete not place within ____ minutes from the time the ingredients were charged into the mixing drum shall be used. a) 120 minutes c) 60 minutes b) 150 minutes d) 90 minutes 6. When concrete is delivered in truck mixers, additional water may beaded to the batch and additional mixing performed to increase the slump to meet the specified requirement if permitted by the Engineer, provided all these operation are performed within ____...
Words: 1818 - Pages: 8
...Citizenship Applications. This year settlement staff met clients from 101 countries and quickly adapted to changes in the immigration application process. For instance, last year, the Citizenship and Immigration Canada (CIC) released new application forms for permanent residence. Although it required a phase of awkward transition for some clients, the staff took this change positively by helping clients understand how the new forms differ from the old ones and why these new forms have to be used. City | Toronto | Montreal | Vancouver | Calgary | Edmonton | Ottawa | Winnipeg | Halifax | Population (metropolitan) | 5.6 million | 3.8 million | 2.3 million | 1.2 million | 1.1 million | 1.2 million | 0.7 million | 0.4 million | Born Overseas | 49% | 21% | 38% | 22% | 19% | 18% | 17% | 7% | Visible Minorities | 43% | 16% | 37% | 19% | 23% | 14% | 13% | 7% | Average House Price Late 2012 | $479 K | $331 K | $684 K | $420 K | $329 K | $337 K | $258 K | $269 K | Average Full Time Income (2006 Census) † | $45,400 | $39,419 | $43,200 | $46,200 | $44,515 | $50,300 | $38,800 | $40,200 | Median Income Per Household (2010) ‡ | $75,580 | $73,690 | $72,610 | $97,070 | $96,750 | $99,880 | $79,680 | $85,170 | Unemployment Rate Late 2012 | 7.6% | 7.9% | 6.2% | 4.2% | 4.2% | 6.0% |...
Words: 859 - Pages: 4
...Fire Code of the Philippines 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 Minimum exit door width. Minimum floor to ceiling height. Maximum stair rise height for a class A stair. Maximum height between landings for class A stair. Minimum headroom for class A & B stairs. Unit area per person for waiting areas or standing rooms. Number of exits for place of assembly for 1000 occupants Travel distance to an exit without fire sprinkler system. Travel distance to an exit with fire sprinkler system. Minimum spacing of rows of seats from back to back for a public assembly building. Maximum number of seats in a row in between aisles. Maximum number of seats in a row opening on to an aisle at one side. Standard width of a seat without dividing arms for places of assembly. Minimum width of an aisle serving an occupant of 60. Minimum headroom created by any projection from the ceiling. Minimum clear width of turnstiles. Minimum dimension of landings in direction of travel for class A & B stairs. Minimum number of risers in any one (1) flight of stairs. Minimum height of a handrail above the upper surface of the tread. Minimum clearance of a handrail from any wall. Minimum height of a guard rail. Maximum height of a guard rail. Minimum inner radius of a monumental stair. Minimum width of any balcony or...
Words: 2336 - Pages: 10
...5-24.5 | 5 | 3.6 | 25-29 | 12 | 24.5-29.5 | 5 | 2.4 | 30-44 | 6 | 29.5-44.5 | 15 | 0.4 | 5. HEIGHT | FREQUENCY | CUMMULATIVE FREQUENCY | CLASS BOUNDARY | 120-129 | 6 | 6 | 129.5 | 130-139 | 15 | 21 | 139.5 | 140-149 | 31 | 52 | 149.5 | 150-159 | 37 | 89 | 159.5 | 160-169 | 9 | 98 | 169.5 | 170-179 | 2 | 100 | 179.5 | | | | | 6. MARKS (%) | FERQUENCY | CUMMULATIVE FREQUENCY | CLASS BOUNDARY | 30-34 | 2 | 2 | 34.5 | 35-39 | 4 | 6 | 39.5 | 40-44 | 7 | 13 | 44.5 | 45-49 | 10 | 23 | 49.5 | 50-54 | 8 | 31 | 54.5 | 55-59 | 5 | 36 | 59.5 | 60-64 | 3 | 39 | 64.5 | 65-69 | 1 | 40 | 69.5 | 7. NUMBER OF STUDENTS (THOUSANDS) | YEAR | PRIMARY SCHOOL | SECONDARY SCHOOL | TOTAL STUDENTS | 1971 | 350 | 154 | 504 | 1975 | 351 | 176 | 527 | 1979 | 353 | 177 | 530 | 1983 | 354 | 180 | 534 | 8. Stem – and – leaf plot for a boy whose height is 162cm (a stem of 16 and a leaf of 2). STEM | LEAF | 16 | 2 | 9. MONTH | RAINFALL (CM) | January | 5.3 | February | 4.9 | March | 6.0 | April | 5.2 | May | 3.4 | 10. Grade | A | B | C | D | E | F | School M | 5 | 8 | 38 | 14 | 25 | 10 | School N | 18 | 22 | 20 | 10 | 25 | 5 | 11. a. Yaro’s Annual Expenses | Items | Amount | Food | 30% | Rent | 15% | Transport | 7.5% | Income tax | 20% | Savings | 5% | Miscellaneous | 22.5% | ...
Words: 446 - Pages: 2
...Safety - Artificial water features Guidelines for the prevention of accidental injury associated with artificial or altered water features in public places Design and safety information for developers, State agencies and councils Consultation draft – June 2010 Safety - Artificial water features Guidelines for the prevention of accidental injury associated with artificial or altered water features in public places Design and safety information for developers, State agencies and councils Consultation draft – June 2010 Department of Planning and Local Government 136 North Terrace, Adelaide GPO Box 1815 South Australia 5001 www.dplg.sa.gov.au FIS 23139 © Government of South Australia. Published 2010. All rights reserved. Introduction It is clear that developers, designers and the community are increasingly valuing the aesthetic and environmental potential of water features–structures such as lakes, ponds and fountains–which are becoming increasingly common in new developments and urban renewal projects. At the same time, walking and cycling paths are also being provided to take advantage of the recreational opportunities presented by natural water courses throughout our suburbs. These features add to the vibrancy of our community, but they also present an element of danger, particularly for children. At the time of drafting this document there were no Australian guidelines or other reference documents dealing with safety issues associated with these features...
Words: 3484 - Pages: 14
...CHAPTER 1 INTRODUCTION 1.1 Background of the Study In this age of industrialization and globalization, the importance of electricity is unquestionable. Considered as one of the basic needs of mankind, it is essential not only in performing household tasks or maintaining livelihood activities, but also in improving people’s well-being. Through electrification, people have greater access to productivity and developments in technology, infrastructure, health, education, communication, and even modern and sustainable livelihoods. However, despite its importance there are still many households especially here in Mindanao which do not have connection to electricity. Based on the results of the 2008 Annual Poverty Indicators Survey, two in every five poor Filipino families living in the urban or rural areas do not have electricity in their homes (National Statistics Office, 2008). The reason for this is the high cost of electricity.For the economically disadvantaged, electricity is considered a luxurious necessity. Another problem that confronts electricity utilization both in the urban and rural areas is the frequent power rate increase and the prevailing power shortages. Based on the situation here in Iligan City as of May 2013, insufficient power supply caused Iligan Light and Power, Inc. (ILPI) to purchase additional 10 MW from MPC (Mapalad Power Corporation). This resulted to increase in power cost from Php 6.53 per kWh to Php 7.67 per kWh. With the increase in demand, possibility...
Words: 7474 - Pages: 30
...Indian J. Genet., 69(4) (Spl. issue): 352-360 (2009) Analysis of diversity among cytoplasmic male sterile sources and their utilization in developing F1 hybrids in Pearl millet [Pennisetum glaucum (R.) Br] C. Tara Satyavathi*, Sakkira Begum, B. B. Singh, K. V. Unnikrishnan and C. Bharadwaj Division of Genetics, Indian Agricultural Research Institute, New Delhi 110 012 Abstract The present study aims at analysis of diversity among parental lines of different cytoplasmic sources and their utilization in developing F1 hybrids. Seven male sterile cytoplasmic lines belonging to A1 – 3; A4 – 2 and A5 – 2 were crossed with three elite restorers. The cluster analysis done with molecular data obtained from genomic DNA using SSR markers grouped the parental lines belonging to A1 cytoplasm into one cluster, A4 into one and A5 into the other. The assessment of the performance of the F1 hybrids was done through standard heterosis, heterobeltiosis and economic heterosis. The study clearly indicated that all the seven cytoplasmic male sterile lines coming from different cytoplasmic sources are capable of producing new superior hybrids. Physiological characters like chlorophyll, relative carotenoids and root length density have also been studied to assess the performance of parents and F1 hybrids. Higher economic heterosis was observed for yield in A 1 cytoplasm compared to A4 and A5 cytoplasms. Desirable effects of earliness and maturity can be obtained using A4 cytoplasm while desirable...
Words: 5522 - Pages: 23
