...MBA A605 or MSA A605 – Advanced Auditing (Online) Instructions for Completing Assignment Templates The instructor will reduce –– by one full letter –– a student’s grade on any submitted document template for which the student has not followed all of these instructions. The instructor will automatically award a grade of 50 of 100 possible points for all late assignments, as explained further below. Prior to the due date for the assignment, students must individually: 1. Analyze each assigned case and related readings, as indicated in this document template. 2. In the document template, provide carefully prepared summaries of the key facts of each case and responses to each of the case questions herein (there are eight templates – one for each week of the course). • Students must enter responses in the table rows (or cells) that follow each request for a key case fact summary and each case question. The template includes additional instructions for preparing key case fact summaries further below. • Students must enter their key case fact summaries and responses to case questions (i) single spaced and (ii) in the font type and size that is pre-determined in the document templates. Students must not make any changes to the templates (note the header on each page of this template). Wherever grammatically appropriate and helpful, students should use paragraph breaks and “bullets” to organize their responses. • Students’ responses must not exceed the maximum...
Words: 497 - Pages: 2
...Analyitical Report of website: www.flinders.edu.au Student name: Garth Trickett Student number: 3068276 Tutor Name: Carol Drew Table of contents 1. Executive summary 2. Introduction 3.1 How easy is it to choose a course and apply for the university it using the website? 3.2 Website Template Layout 3.3 Homepage Layout 3.4 Colour Scheme 4.1 Conclusion 4.2 Recommendations 5. References Executive summary Introduction The aim of this report is to critically analyse the architecture of the website www.flinders.ed.au. The information gathered from the analysis will be used to devise solutions to problems with the website. The technique of examination for the website was to thoroughly explore the different pages of the website and grade each area of the website using appropriate criteria. Dave Gehrke (1999) states that” without efficient and user=friendly navigation, the user is likely to get confused, lost or frustrated and leave the site for good”. A resultant survey run by Gehrke (1999) showed that page loading speed and navigational efficiency are the most important things to users. The most important user type that needs to be happy with the website for it to be successful is prospective students as they make a majority of the people visiting the site. Prospective students are more likely to turn into current students if they like the feel of the website. This analyst took on the role of prospective student to test the...
Words: 1100 - Pages: 5
...Real Agent Installation and Setup Documents Real Agent Real Estate Setup Documentation Theme Installation Login into your WordPress dashboard and click on “Appearance” --> “ Themes” tab. You will have the option to manage existing themes or Install new ones, click on “Install Themes”. A sub menu with the following options will appear below the main tabs: Search | Upload | Featured | Newest | Recently Updated Click on the “Upload” item and you will get the following screen: Install a theme in .zip format Click on “Choose File” and locate the purchased file in your PC and then click on “Install Now”. Preview or Activate the theme and check your website to see the Real Agent Real Estate theme. The theme is now active. Demo content installation (Developer Package) Developer (Full) package only --> Click on "Tools"--->import-->WordPress and locate the provided xml file in your computer, click upload file and import, select your author preferences and click "Download and import file attachments". All the content from the demo theme will be on your website. Setting Permissions Make sure the following folder have "write or 777" permissions for authors and specific images thumbnail creation: /cache/ (located within the theme) Image Size Image sizes are defined by default in Real Agent theme but you also need to setup your "Media" settings in the WordPress administration to tell WordPress to resize all your images to the correct size...
Words: 2294 - Pages: 10
...kin31937_ch.02.qxd 10/23/06 2:06 PM Page 11 THESIS SENTENCE TEMPLATES A thesis sentence is a sentence in the introduction that tells the reader what the topic or argument of the essay is. Experienced writers have little difficulty writing thesis sentences. This is because they have read and written thousands of them. You, the emerging writer, don’t have it so easy. So, you have to accelerate the process. You do this via thesis sentence templates. A thesis sentence template is the basic machinery of a thesis sentence, what makes it work. It is like a car minus the hood, the doors, the engine, the side panels, the wheels, and the air conditioner. On that basic structure, thousands of different cars can be built. From a thesis sentence template, thousands of thesis sentences can be constructed. The introduction for any piece of writing is very important. This is where you establish a relationship with the reader. The introduction will always be read, while the body of the paper might sometimes be glossed over (not carefully read) by graders of standardized tests like the SAT® or TOEFL®. ? HOW THE THESIS SENTENCE TEMPLATES WORK Each type of thesis sentence presented in this section is followed by two or three examples of how very different thesis sentences can be written using the template. Then you will write two or three thesis sentences of your own using the template. If you find the template difficult, just do one sentence on your own. But the more you...
Words: 1077 - Pages: 5
...the project network and baseline information below, complete the form to develop a status report for the project at the end of period 4 and the end of period 8. From the data you have collected and computed for periods 4 and 8, what information are you prepared to tell the customer about the status of the project at the end of period 8? (See template below for Exercise 13-3) Ch13 Ex1,2,3,4 Templates EV.doc 1 of 6 10/10/2011 12:31 PM Earned Value Exercises Ch13 Ex1,2,3,4 Templates EV.doc 2 of 6 10/10/2011 12:31 PM Earned Value Exercises End of Period 4 Task Actual % Complete A B C D E Finished 50% 33% 0% 0% EV ____ ____ ____ ____ ____ ____ AC 300 1000 500 0 0 ____ PV 400 800 600 ____ ____ ____ CV ____ ____ ____ ____ ____ ____ SV ____ ____ ____ ____ ____ ____ Cumulative Totals End of Period 8 Task A B C D E F Actual % Complete Finished Finished Finished 25% 33% 0% Cumulative Totals EV ____ ____ ____ ____ ____ ____ ____ AC 300 2200 1500 300 300 0 ____ PV 400 2400 1500 0 ____ ____ ____ CV ____ ____ ____ ____ ____ ____ ____ SV ____ ____ ____ ____ ____ ____ ____ Ch13 Ex1,2,3,4 Templates EV.doc 3 of 6 10/10/2011 12:31 PM Earned Value Exercises 4. Given the following project network, baseline, and status information, develop status reports for periods 2, 4, 6, 8 and complete the performance indexes table. Calculate the EACf and the VACf. Based on your data, what is your assessment of the current...
Words: 440 - Pages: 2
...Week 2 Assignment: Understanding Effective Money Management Assessment A, Part 1: Creating a Personal Financial Statement - Assets | 1 point | Car: Bluebook value $1250.00Cash: $378.00Savings Accounts: $826.00 | Assessment A, Part 2: Creating a Personal Financial Statement - Debts | 1 point | Rent: $750.00Electric/ Gas bill: $131.75Cable/ internet/ Phone bill: $80.42Credit Card: $31.00Cell phone bill: $72.37 | Assessment A, Part 3: Identify Money Management Tool | 1 point | Explain to Monica how the money management tools were identified. | Students should explain how they evaluated various cash management products and services. | Assessment A, Part 4: Creating a Personal Financial Statement – Steps | 1 point | Drag the steps listed on the right into their correct sequences on the left. When done click the Send button | Step 1: I got all my financial stuff together – bills, loans, bank statements, etc. | Step 2: I balance my checkbook. | Step 3: I decided what were my assets and what were my debts. | Step 4: I enter my assets in the program. | Step 5: I enter my debts in the program. | Step 6: The program gave me a Net worth figure at the end. | Assessment B: Creating a Monthly Cash Flow Statement ...
Words: 255 - Pages: 2
...Diagnostic Algebra Assessment Definitions Categories Equality Symbol Misconception Graphing Misconception Definition Concept of a Variable Misconception Equality Symbol Misconception As algebra teachers, we all know how frustrating it can be to teach a particular concept and to have a percentage of our students not get it. We try different approaches and activities but to no avail. These students just do not seem to grasp the concept. Often, we blame the students for not trying hard enough. Worse yet, others blame us for not teaching students well enough. Students often learn the equality symbol misconception when they begin learning mathematics. Rather than understanding that the equal sign indicates equivalence between the expressions on the left side and the right side of an equation, students interpret the equal sign as meaning “do something” or the sign before the answer. This problem is exacerbated by many adults solving problems in the following way: 5 × 4 + 3 = ? 5 × 4 = 20 + 3 = 23 Students may also have difficulty understanding statements like 7 = 3 + 4 or 5 = 5, since these do not involve a problem on the left and an answer on the right. Falkner presented the following problem to 6th grade classes: 8 + 4 = [] + 5 All 145 students gave the answer of 12 or 17. It can be assumed that students got 12 since 8 + 4 = 12. The 17 may be from those who continued the problem: 12 + 5 = 17. Students with this misconception may also have difficulty with the idea that adding...
Words: 797 - Pages: 4
...Team B Calorie Count Tool PRG/211 May 5, 2014 Team B Calorie Count Tool PROBLEM STATEMENT Team B was asked to develop a program which would calculate the user’s daily intake of calories and measure those calories against the overall calories expended. The core purpose of this program will do two primary functions. First, it will record the user intake of calories as acquired through meals throughout the day. Second, the user will record caloric output associated with physical activity. This information will be calculated together to determine the caloric surplus or deficit for the user. In order for the program to execute accurately, and provide customized results, the user will be required to input personal data to include gender, age, weight, and height. This additional information is essential to determine the user’s default caloric burn rate, otherwise known as the basal metabolic rate (BMR). The BMR and the calories burned as a result of physical activity will be calculated against the intake of calories to determine the overall success for the user. As the program is executed it must: * Record user name, age, height, weight to enable more accurate calculations * Record the users specific caloric values entered for each meal * Record the user activity and caloric burn values for that activity * Calculate the basal metabolic rate (BMR) for the individual * Subtotal the total caloric values for the day * Combine the physical activity and...
Words: 1524 - Pages: 7
...Problem Solving with Computing Homework - WEEK 2 [30 points] This is a review of some of the material from Chapter 2 and lectures from class. No credit for answers that are copies or near verbatim transcripts – please use your own words1 and document sources where appropriate. 1 This will apply to all assignments in this class. Answer the following questions: Chapter 2 1. Short Answers [1 point each, 2 points total] 1. What does a professional programmer usually do first to gain an understanding of a problem? The first thing that a professional programmer usually do first to gain an understanding of a program is to closely relate customer (Interview ) to inquire or gather information about the problem. 2. What two things must you normally specify in a variable declaration? The two things normally specified in a variable declaration are the variable type and identifier. 2. Algorithms / Pseudocode [1 point each, 5 points total] 1. Design an algorithm that prompts the user to enter his or her height and stores the user’s input in a variable named height. Declare height Display “Enter Your Height” Input Height Display “Height” 2. Write assignment statements that perform the following operations with the variables a and b. - Adds 2 to a and stores the result in b. - Subtracts 8 from b and stores the result in a Set b=2+a Set a=b-8 3. Write a pseudocode statement that declares the variable cost so it can hold real numbers. Floating Point-Variable...
Words: 1823 - Pages: 8
...11108944 Name: ASHWINI KUMAR Roll No. : RE3R02B32 PART- A 1. Ans :- (a) unary and ternary operator Unary operator:- It pecedes an operand . The operand (the value on which the operator operates ) of the unary operator must have arithmetic or pointer type and the result is the value of the argument. Example:- If a=5 then +a means 5 If a=0 then +a means 0. If a=-4 then +a means -4. Ternary operator:- It precedes an operand. The operand of the unary operator must have arithmetic type and the result is the negation of the operand’s value. Example:- If a=5 then –a means -5 If a=0 then –a means 0 If a=-4 then –a means 4. (b) Assignment and equalto operator Assignment operator:- Equal to operator: An assignment operator assigns value In this we put the To a variable. value as it is. Example – Example- a*=5 means a=5*5. Int a; a=5 means a is initialized with 5 if(a==5) { return true; } return false; (c) Expression and statement Expression:- An expression is any valid combination of operators , constants , and variables. Example:- ...
Words: 399 - Pages: 2
...Selection statements Selection is used to select which statements are to be performed next based on a condition being true or false. Relational expressions In the solution of many problems, different actions must be taken depending on the value of the data. The if statement in C I used to implement such s decision structure in its simplest form – that of selecting a statement to be executed only if a condition is satisfied. Syntax: if(condtion) statement executed if condition is true When an executing program encounters the if statement, the condition is evaluated to determine its numerical value, which is then interpreted as either true or false. If the condition evaluates to any non-0 value (positive or negative), the condition is considered as a “true” condition and the statement following the if is executed; otherwise this statement is not executed. Relational Operators In C Relational operator | Meaning | Example | < | Less than | age < 30 | > | Greater than | height > 6.2 | <= | Less than or equal to | taxable <= 200000 | >= | Greater than or equal to | temp >= 98.6 | == | Equal to | grade == 100 | != | Not equal to | number !=250 | In creating relational expressions, the relational operators must be typed exactly as given in the above table. Thus, although the following relational expressions are all valid: age > 40 length <= 50 temp >= 98.6 3 < 4 flag == done day != 5 The following are invalid: length =< 50 ...
Words: 1617 - Pages: 7
...STUDY HABITS OF SECOND YEAR BS-AVTECH STUDENTS OF PATTS COLLEGE OF AERONAUTICS S.Y 2013-2014 An Undergraduate Research Presented to The Languages Department of PATTS College of Aeronautics In Partial Fulfillment of the Requirements for the course ENGL 211 – Technical Report Writing By Guevarra, Giorgio Martin C Guevarra, Lorenzo Miguel Jang, Jose, Yosalina, Leo Xander March 2014 ACKNOWLEDGEMENT The researcher would like to express our thanks to the lord. Our God for his guidance towards everything we do In life, including this study that we had made, and for being an inspiration for us all to do our best in life. We give our thanks to Ms. Karen M. Millano, our adviser for ENGL 211, for carefully and patiently guiding us so that we may finish the thesis research, and for supporting us and believing in us, that we can accomplish our task finishing the thesis. To the respondents of this study, we express our gratitude because without them, this thesis research would not have been completed, we thank them for allowing us to conduct a survey during their spare time, and their patience and integrity in answering the survey. To our parents, for their support and everlasting patience and understanding for us. And lastly to our classmates, since they have been with us since the beginning of the semester and they had been our companions in everything we do for the subject ENGL 211. ABSTRACT STUDY HABITS OF...
Words: 413 - Pages: 2
...SCHOOL OF ENGINEERING YEAR 3 MECHATRONICS ASSIGNMENT LAB REPORT Reading an Analogue Voltage from a Potentiometer to turn a Motor on and off with reading of 40 Assignment 2 Owais Jahanzeb BENG Mechanical Engineering with buissness Lecturer: Dr. Tom Shenton Aim & Objectives The aim of this lab is to develop a functioning program for the PICDEM board to read an analogue signal from a potentiometer and turning a motor on or off if the signal exceeds a certain limit. The program should depict the function that it should turn the motor ON and OFF if the potentiometer reading is less than or equal to 40. The practical uses of such program can be seen in automotive , injection moulding machines, wood processing machines, modern temperature controlled plants, speed control torque operations. Developing Program 1 Figure 1. The schematic circuit & PICDEM board configuration for Program Figure 1. The schematic circuit & PICDEM board configuration for Program The objective of program is to read the correspondent voltage analogous to the potentiometer position and switch the motor on if the reading is over 40 and switch it off if the reading is less than or equal to 40, the value can be adjusted by twisting the screw clockwise and anticlockwise. The program works by implementing the following code. PIC program for Test of potentiometer with value less equal to 40 with comments: include <p16f917.inc> extern DisplayDigit1, DisplayDigit2...
Words: 427 - Pages: 2
...Law Written Assignment 3 Case Study 1 Parks, a 7-foot, 265-pound center for the San Diego Slick, objected when his contract was assigned from the ABC Corporation to the XYZ Corporation, the team’s new owner. The change of owners did not cause a change in the composition of the team although a new coach was hired. Parks’s compensation and his responsibilities remained the same. Was this contract assignable? Facts of the Case: 1) Parks contract was assigned from the ABC Corporation to XYZ Corporation. 2) Parks compensation and his responsibilities remained the same. Issues: 1) The reason why we are in court today is to identify if Park’s contract was assignable. Rules of the Law: 1) Personal Service Contract – The parties agree that a personal service contract may be assigned. This allows the trade of an athlete from one team to another team. 2) Notice of Assignment – Assignee is under a duty to notify the obligor that the assignment has been made and performance must be rendered to the assignee. 3) Anti-Assignment Clause – Prohibits the assignment of rights under the contract. 4) Approval Clause – requires that the obligor approves any assignment of contract. Analysis & Conclusion: Since we do not have all the facts we can assume the following: 1) Parks contract did include the Personal service contract. 2) Notice of assignment was made by XYZ Corporation. 3) Parks contract did NOT include Anti-Assignment Clause. ...
Words: 495 - Pages: 2
...Management Accounting Individual Assignment 1. Variable manufacturing cost per unit = (323,000,000-160,000,000-24,000,000-100,000,000) 850,000 = $45.88 per unit Fixed manufacturing cost per unit = $100,000,000 850,000units = $117.65 per unit Total manufacturing cost per unit= 45.88+117.65 = $163.53per unit 2. Fixed overhead rate= $100,000,000 800,000units =$125 per unit Production volume variance= (850,000 X 125)-(800,000 X 125) =$106,250,000-$100,000,000 = $6,250,000 Favourable 3. Absorption costing. | $ | $ | SalesLess: Cost of goods soldOpening inventoryProduction(850,000 X (255+125))(-)Ending inventory(30,000 X 405)Gross MarginAdjustments for production variance(850,000-800,000)x125Operating Income | 0323,000,000(11,400,000) | 450,000,000(311,600,000) | | | | | | 138,400,0006,250,000F | | | 144,650,000 | Income Statement for the year ended 31December 2012 4. Variable Costing Income Statement for the year ended 31 December 2012 | $ | $ | SalesOpening inventoryProduction(850,000 X 255)(-)Ending inventoryContribution MarginFixed factory overheadOperating income | 0216,750,000(7650,000) | 450,000,000(209,100,000) | | | 240,900,000(100,000,000) | | | 140,900, 000 | 5. Based on the calculations of absorption costing and variable costing for the year 2012,it would be better to calculate and measure using the absorption costing...
Words: 288 - Pages: 2
