Free Essay

Boeing

In:

Submitted By amandakhaw
Words 10353
Pages 42
qtr_02

10

A quArterly publicAtion boeing.com/commerciAl/ AeromAgAzine

building better communication New Air Traffic
Surveillance
Technology complying with the Aging Airplane
Safety rule new tool for collaboration on in‑Service issues
Fuel conservation
Strategies:
Descent and
Approach

AERO

cover photo: 777 APU exhaust bay.

AERO

contents
03
building better communication
Four years ago, we reintroduced AERO magazine in response to a boeing customer support survey. late last year, we went back to you to find out how well we are doing.

07
New Air Traffic Surveillance
Technology
Air traffic service providers and regulators are moving toward airspace and flight operations to enable greater flexibility and adaptability along with assuring improved traffic flow, capacity, efficiency and safety.
A key part is the transition from radar to
ADS‑b surveillance.

07

15 complying with the Aging
Airplane Safety rule new materials help operators comply with the u.S. Federal Aviation Administration’s new rule on aging airplane safety.

21

15

new tool for collaboration on in‑Service issues

21

boeing introduces a new collaboration platform that integrates two previous elec‑ tronic bulletin boards in a single application and includes a number of new features.

25
Fuel conservation Strategies:
Descent and Approach

25 www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

the descent and approach phases of flight are the flight crew’s final opportunities to reduce fuel consumption.

i s sue 38_ q u arter 02 | 2010

01

AERO
Publisher

Design

Cover photography

Editorial Board

Shannon Frew

methodologie

Jeff corwin

gary bartz, Frank billand, richard breuhaus, Darrell Hokuf, Al John,

Editorial director

Writer

Printer

Jill langer

Jeff Fraga

colorgraphics

Editor-in-chief

Distribution manager

Web site design

Jim lombardo

nanci moultrie

methodologie

Doug lane, Jill langer, Duke mcmillin, David presuhn, wade price, bob rakestraw, Frank Santoni, Jerome Schmelzer, constantin zadorojny
Technical Review Committee

gary bartz, Frank billand, richard breuhaus, David carbaugh,
Justin Hale, Darrell Hokuf, Al John, Doug lane, Jill langer, Duke mcmillin,
David palmer, David presuhn, wade price, Jerome Schmelzer, william tsai, constantin zadorojny
AERO Online

www.boeing.com/commercial/aeromagazine

AERO magazine is published quarterly by boeing commercial Airplanes and is distributed at no cost to operators of boeing commercial airplanes. AERO provides operators with supplemental technical information to promote continuous safety and efficiency in their daily fleet operations. the boeing company supports operators during the life of each boeing commercial airplane. Support includes stationing Field Service representatives in more than
60 countries, furnishing spare parts and engineering support, training flight crews and maintenance personnel, and providing operations and maintenance publications. boeing continually communicates with operators through such vehicles as technical meetings, service letters, and service bulletins. this assists operators in addressing regulatory requirements and Air transport Association specifications. copyright © 2010 the boeing company

information published in AERO magazine is intended to be accurate and authoritative.
However, no material should be considered regulatory‑approved unless specifically stated.
Airline personnel are advised that their company’s policy may differ from or conflict with information in this publication. customer airlines may republish articles from AERO without permission if for distribution only within their own organizations. they thereby assume responsibility for the current accuracy of the republished material. All others must obtain written permission from boeing before reprinting any AERO article. print copies of AERO are not available by subscription, but the publication may be viewed on the web at www.boeing.com/commercial/aeromagazine. please send address changes to me.boecom@boeing.com. please send all other communications to AERO magazine, boeing commercial Airplanes, p.o. box 3707, mc 21‑72, Seattle, washington, 98124‑2207, uSA. e‑mail: webmaster.bcA@boeing.com
AERO is printed on Forest Stewardship council certified paper.

02

A e r o q u A r t e r ly

q tr_02 | 10

building better communication Four years ago, we reintroduced
AERO magazine in response to a boeing customer support survey, in which you told us how much you value information from and communication with boeing.
L O u M A NC i N i

Senior Vice president bo eing commercial Aviation Services

As a matter of daily business, we continually communicate with boeing operators through such vehicles as technical meetings, service letters, and service bulletins. our goal in bringing back
AERO magazine was to provide supplemental technical information that helps you operate your boeing fleets efficiently and increases your awareness of boeing products and services. late last year, we went back to you to find out how well we were doing. we conducted an AERO readership survey
(see figs. 1– 4), and more than 900 of you responded. thank you!

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

we were very pleased to learn that a significant majority of readers (92 percent of survey respondents) “agree” to “strongly agree” that AERO’s content is valuable and timely. Specifically, respondents said they value articles about engineering (86 percent), maintenance (84 percent), safety (82 per‑ cent), and flight (80 percent). people overwhelmingly (80 percent) read all four issues per year, with half reading the entire issue every quarter and a third focusing on articles pertaining to their jobs. respondents said they read AERO both on the internet and in print. of the respon‑ dents who work for the airlines and have

03

Figure 1: Total survey respondents’ locations by continent
AERO readership is evenly spread across the globe.

europe

25.5%
27.5%
Asia

27% north America
4.5% Africa

5%
10.5%

Australia

South America

Figure 2: Demographics of AERO readership survey respondents
Airlines continue to be the most frequent readers of AERO.

52%
Airlines

26.3% other* 13.2% mros** 8.5% boeing * other = Variety of statistically small categories: supplier, regulator, school, library, trade association, media
** maintenance, repair, and overhaul organizations

04

A e r o q u A r t e r ly

q tr_02 | 10

Figure 3: Airline respondents’ locations by country

u.S.

12.3 %

uAe

5.0 %

more than 65 percent of survey respondents who work at airlines are from 16 countries.

india

5.0 %

Japan

4.8 %

uK

4.8 %

Australia

3.9 %

brazil

3.9 %

turkey

3.9 %

netherlands

3.7 %

germany

3.7 %

canada

2.9 %

new zealand

2.9 %

taiwan

2.4 %

china

2.2 %

Spain

2.2 %

mexico

2.2 %

Figure 4: Airline respondents’ areas of expertise

Flight

33.0 %

maintenance

18.5 %
6.4 %

Safety

2.0 %

regulatory

1.9 %

others

access to print copies, more than half prefer reading the magazine in print and a quarter prefer reading it online. the majority of respondents (70 percent) can easily access AERO on the internet, and most (82 percent) find AERO easily navigable and accessible online. However, we were surprised to learn that about
12 percent of respondents did not know that AERO was available on the internet.
As a result, we are planning an awareness

33.7 %

management

most airlines respondents’ expertise is in engineering, flight, or maintenance.

engineering

4.5 %

campaign to help advertise the AERO web site at www.boeing.com/commercial/ aeromagazine. we also will be looking for opportunities to create even richer interactive experiences for readers on the internet. we sincerely appreciate the time you took to let us know what you like about
AERO — as well as where you hope we’ll improve. please feel free to contact us anytime to let us know what you’d like to see in AERO. you may e‑mail your ideas

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

and comments to us at webmaster.bcA@ boeing.com. thank you for sharing your thoughts, and thank you for operating boeing airplanes. 05

ADS‑b is intended to transform air traffic control by providing more accurate and reliable tracking of airplanes in flight and on the ground.

new Air traffic
Surveillance technology
Air traffic service providers and regulators around the world are moving toward airspace and flight operations to enable greater flexibility and adaptability, along with assuring improved traffic flow, capacity, efficiency, and safety. A key part is the transition from radar surveillance to Automatic Dependent Surveillance‑broadcast (ADS‑b) to track airplanes in flight and on the ground more accurately and reliably. the changes will require new equipage on boeing airplanes in production as well as those already in service.
By William R. Richards, technical Fellow, Avionics and Air traffic management;
Kathleen O’Brien, Associate technical Fellow, Avionics and Air traffic management; and
Dean C. Miller, Associate technical Fellow, Avionics and Air traffic management

ADS‑b is a new surveillance technology designed to help modernize the air trans‑ portation system. it provides foundational technology for improvements related to the next generation Air transportation System
(or nextgen) and Single european Sky
Air traffic management (Atm) research programme (or SeSAr). nextgen refers to the effort of the u.S. Federal Aviation
Administration (FAA) to transform the air traffic control (Atc) system to support a larger volume of airplanes more efficiently.
SeSAr is a similar effort in europe.

Developed and certified as a viable low‑ cost replacement for conventional radar,
ADS‑b allows Atc to monitor and control airplanes with greater precision and over a far larger percentage of the earth’s surface than has ever been possible before. For example, large expanses of Australia and
Hudson bay in canada, currently without any radar coverage, are now visible on Atc screens after strategic placement of low‑ cost ADS‑b receiving stations.
For nextgen and SeSAr, ADS‑b is one of the most important underlying technologies in the plan to transform Atc from the current radar‑based surveillance to

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

satellite‑based global positioning system
(gpS) surveillance. in addition, the FAA states that ADS‑b will serve as the corner‑ stone for this transformation, bringing the precision and reliability of satellite‑based surveillance to the nation’s skies. this article explains the new ADS‑b technology, how it works in the airplane, how it is used in Atc, and how this tech‑ nology benefits Atc surveillance on the ground. it will also explain how ADS‑b will increase flight crew awareness of other airplanes in the air and on the ground, highlight potential operator benefits, and outline the upcoming equipage mandates.

07

H O W A DS-B W ORKS

ADS‑b uses a combination of satellites, transmitters, and receivers to provide both flight crews and ground control personnel with very specific information about the location and speed of airplanes in the area
(see fig. 1).
From the airplane perspective, there are two aspects to ADS‑b. ADS‑b out signals are sent from the transmitting airplanes to receivers located on the ground or in other airplanes. the ADS‑b out signals travel line‑of‑sight from transmitter to receiver.
ADS‑b out signals are received by Atc ground stations for display of traffic to air traffic controllers. ADS‑b out signals are also received by other airplanes in the vicinity of the transmitting airplanes. After reception of the ADS‑b signals by the receiving airplane, the lateral position
(latitude and longitude), altitude, velocity, and flight number of the transmitting airplane are presented to the receiving airplane pilot on a cockpit Display of traffic information (cDti). the received ADS‑b signal is called ADS‑b in. the maximum range between the transmitting and receiving airplanes is greater than
100 nautical miles (nmi), allowing the cDti to display traffic both near and far. navigation satellites send precise timing information that allows airplanes equipped with global navigation satellite system
(gnSS) or gpS receivers to determine their
08

own position and velocity. Airplanes equipped with ADS‑b out broadcast precise position and velocity to ground
ADS‑b receivers and to other airplanes via a digital datalink (1090 megahertz) along with other data, such as the airplane’s flight number and emergency status. ADS‑b receivers that are integrated into the Atc systems on the ground or installed aboard other airplanes (i.e., ADS‑b in) provide users with an accurate depiction of real‑ time aviation traffic. unlike conventional radar, ADS‑b works at low altitudes and on the ground so that it can be used to monitor traffic on the taxi‑ ways and runways of an airport. ADS‑b is also effective in remote areas where there is no radar coverage or where radar coverage is limited.
T H E B ENEF i T S O F A DS-B T O A i R L i N ES

with appropriate ground and airborne equipage updates and operational procedure readiness, ADS‑b may provide airlines with several benefits, including:
Safety. ADS‑b gives the aviation industry the ability to maintain or improve existing safety standards while increasing system efficiency and capacity.
■■

ADS‑b significantly improves flight crews’ situational awareness because they know where they are in relation to other airplanes.

■■

■■

■■

■■

■■

■■

■■

it gives a real‑time, common surveillance picture to share information quickly if participating airplanes deviate from their assigned flight paths. it offers more precise and commonly shared traffic information. All participants have a common operational picture. it provides more accurate and timely surveillance information than radar.
ADS‑b provides more frequent updates than radar, which rotates once every
6 or 12 seconds for terminal and en route surveillance, respectively. it displays both airborne and ground traffic. it allows for a much greater margin in which to implement conflict detection and resolution than is available with any other system by providing an effective range of more than 100 nmi with high accuracy. it clearly and immediately indicates changes as the conflicting traffic turns, accelerates, climbs, or descends.
ADS‑b in applications can provide automatic traffic call‑outs or warnings of imminent runway incursions.

Capacity. ADS‑b can provide a substantial increase in the number of flights the Atc system can accommodate. more airplanes can occupy a given airspace simultaneously if separation standards are reduced, and the increased precision of ADS‑b enables greatly reduced separation standards

A e r o q u A r t e r ly

q tr_02 | 10

Figure 1: How ADS-B works by using a combination of satellites and receivers, ADS‑b provides both flight crews and ground control personnel with information about the position and velocity of airplanes in the area.

global navigation
Satellite System

ADS‑b out transmitter ground Air traffic control ADS‑b in receiver ADS‑b receiver remote receivers what ADS‑b means
Automatic
position and velocity information is automatically transmitted periodically (at least once every second) without flight crew or operator input. other parameters in the transmission are preselected and static.

Dependent the transmission is dependent on proper operation of on‑board equipment that determines position and velocity and availability of a sending system.

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

Surveillance position, velocity, and other airplane information are surveillance data transmitted.
Broadcast
the information is broadcast to any airplanes or ground station with an ADS‑b receiver. current mode S Atc transponders are interrogated and then send a reply.

09

Airlines can reduce cost per passenger kilometer by flying more direct routes at more efficient altitudes and speeds with uninterrupted climbs and descents.

while maintaining safety. ADS‑b not only increases the accuracy and integrity of the position reports but also increases the frequency of the reports for a better understanding of the air traffic environment in the air and on the ground. ADS‑b also:
■■

■■

■■

■■

increases runway capacity with improved arrival accuracy to the metering fix.
Helps maintain runway approaches using cockpit display of traffic information in marginal visual weather conditions. enhances visibility of all airplanes in the area to allow more airplanes to use the same runway.
Allows 5 nmi of separation in non‑radar airspace (nrA) compared to current procedural separation, and potentially allows reduction of separation from 5 to
3 nmi in radar airspace.

efficient cruise altitude, which also reduces environmental impact. with ADS‑b:
■■

■■

■■

■■

■■

■■

Efficiency. ADS‑b provides improved flight efficiency as well as increased capacity. it allows substantial improvement in the accuracy of surveillance data within the
Atc system. this helps Atc understand the actual separation between airplanes and allows controllers to avoid inefficient vectoring commands to maintain separa‑ tion assurance. in‑trail procedures, which assist airplanes to move to optimal operational altitudes in remote areas, such as oceanic airspace, allow pilots to request and receive changes to a higher, more fuel‑
10

■■

Airplanes can fly closer together because controllers have more precise data updated more often. the amount of fuel consumed is reduced because airplanes fly a more efficient path. existing, proven digital communications technology is used, allowing ADS‑b to be implemented rapidly for a relatively low cost. there is affordable, effective surveillance of all air and ground traffic, even on airport taxiways and runways and in airspace where radar is ineffective or unavailable. general aviation airplanes can use ADS‑b datalinks to receive flight information services such as graphical weather depiction and textual flight advisories.
Airlines can reduce cost per passenger kilometer by flying more direct routes at more efficient altitudes and speeds with uninterrupted climbs and descents. engine emissions and airplane noise are reduced through continuous descent and curved approaches.

Equi P MENT R E q ui R ED F OR A DS-B

Special equipment is required both on board airplanes and on the ground to transmit and receive ADS‑b signals.

Airborne components for ADS-B Out. A global navigation Satellite System (gnSS) receiver and associated antennas on board the airplane receive and process gnSS satellite signals to produce the airplane’s position and velocity. the position and velocity information is sent to the Atc transponder, which develops ADS‑b out messages that are broadcast from the
Atc antennas.
Airborne components for ADS-B In. An airborne collision avoidance system/traffic alert and collision avoidance system unit and associated antennas is used to receive the ADS‑b out message from a target airplane. the target airplane information is then processed and sent to a cockpit display of traffic information (cDti) for dis‑ play to the flight crew. Depending on the requirements of the ADS‑b in application, other airborne systems that could be affected include flight management computer, control panels, electronic flight bag, displays, and associated wiring.
Ground components. the Atc system must include ADS‑b ground stations to receive the ADS‑b out messages from airplanes. ADS‑b ground stations include an ADS‑b receive antenna with an unobs‑ tructed view toward the horizon, an ADS‑b receiver, power supply, communications link (satellite or terrestrial), and physical and data security.

A e r o q u A r t e r ly

q tr_02 | 10

Standards are required to assure that the airborne components work properly with the ground components for air navigation service providers (AnSps) around the world.
ADS-B O u T g R O u N D A PPL i C AT i O NS

ADS‑b out offers several benefits to ground‑based Atc. in radar areas, it can be used by Atc to supplement 5‑ and
3‑nmi en‑route separation services. where no other radar or surveillance is available, it can be used by Atc to provide those separation services.
For airport surface surveillance, ADS‑b out provides ground control with a picture of all airplanes and vehicles on the ground. in the terminal area, ADS‑b out could enable 2.5‑nmi separation in‑trail approaches, 2‑nmi separation for depen‑ dent parallel approaches, and separation during independent parallel approaches for runways spaced more than 4,300 feet apart.

outside the cockpit window using the cDti.
ADS‑b in could also enhance situational awareness on approach, allowing contin‑ ued approaches using the cDti after initial visual acquisition.
Airborne spacing applications facilitate increased capacity and efficiency in a number of ways. enhanced sequencing and merging enable precise delivery of airplanes to the meter fix for subsequent continuous descent approaches; in trail procedures assist airplanes in moving to optimal operational altitudes in remote areas; and enhanced crossing and passing operations assist airplanes in flying optimal flight routes and speeds. ADS‑b in also enables airplane crews to assume responsibility for separation from up to two other airplanes through delegated enroute separation. in this scenario, the controller retains responsibility for separation from other airplanes beyond the two the crew has assumed responsibility for.
ADS-B A RO u N D T HE W ORLD

ADS-B i N A i R BORNE A PPL i C AT i O NS

ADS‑b in offers potential benefits across all domains of flight, from departure to arrival (see “ADS‑b in various domains of flight” on this page). it provides situational awareness of other airplanes and vehicles on the airport surface (see fig. 2) and situational awareness of other airborne traffic, such as assistance in finding targets

ADS‑b activity is increasing around the world. AnSps are looking to ADS‑b as a means of decreasing the cost of providing services and increasing the operational efficiency and capacity of the regional air transportation system. boeing is actively engaged with european regulators and operators and the
FAA to gain approval for boeing airplanes

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

ADS‑b in various domains of flight
Atc provides flow management to coordinate across all domains
Terminal
Surface and Departure
■■ Surface Situational Awareness
En Route
Domestic climb and cruise
■■ conflict Detection
■■ Airborne Situational Awareness
Oceanic
oceanic and remote
■■ in‑trail procedures
■■ reduced Separation
■■ enhanced crossing and passing operations ■■ Airborne Situational Awareness
En Route transitional to Arrival
■■ continuous Descent Approaches
■■ Airborne Situational Awareness
Terminal
Arrival and Surface
■■ Final Approach runway occupancy Awareness
■■ enhanced Visual Separation on Approach
■■ Surface Situational Awareness

11

Figure 2: Airport surface situational awareness
Surface situational awareness gives flight crews data about the airport surface for taxi and runway operations, improving safety and reducing taxi time, especially during low‑visibility conditions.

to operate current ADS‑b equipage in european nrA. boeing has been installing
Atc transponders with 1090eS ADS‑b out since early 2004. boeing has provided the FAA with documentation supporting the FAA’s August 2008 approval that this existing equipage complies with the requirements outlined in european Aviation
Safety Agency (eASA) acceptable means of compliance (Amc) 20‑24 document regarding ADS‑b equipage for nrA. boeing is updating airplane flight manuals to reflect equipage compliance with eASA
Amc 20‑24. the earliest known mandate for ADS‑b equipage is november 2010 in canada’s
Hudson bay, where separation will be reduced from 80 nmi to 5 nmi in trail. trans‑ port canada is allowing use of the 1090eS existing equipage for this nrA application. the next mandate will be December
2013 in Australia. because much of
Australia’s western airspace is not covered by radar systems, the country has selected to aggressively move forward with ADS‑b‑ based surveillance to avoid the costs associated with deployment and mainte‑ nance of expensive radar systems. Australia will also allow use of existing transponder equipage but will require selective‑ availability‑aware (i.e., SA‑aware) global positioning system receivers for all new production airplanes delivered after June
2012 that operate in Australian airspace.

12

europe has near‑term plans to deploy
ADS‑b out on a voluntary basis for traffic flow improvements in nrA using existing equipage. europe plans to mandate
ADS‑b out on all airplanes entering european airspace in 2015 and in 2013 for new production airplanes. europe and the united States have decided to mandate transponders that meet the new Do‑260b transponder standard published by the radio technical commission for
Aeronautics) in December 2009. the united States plans on mandating
ADS‑b out by January 2020 for all airplanes, both air transport and general aviation. with increasing ADS‑b out equipage in the united States from now until the 2020 mandate year, the FAA expects voluntary equipage with ADS‑b in to support users with improved operational benefits. china is exploring ADS‑b out in nrA.

and the u.S. mandate by 2020. boeing will prepare service bulletins to provide operators with complete information on retrofitting their fleet. boeing is currently evaluating the fleet to assess for cost‑ effective ADS‑b in/cDti implementation. meanwhile, boeing recommends that airplanes that have been purchased with
1090 enhanced/elementary surveillance
(eS) capability, or have been modified for
1090eS, be certified for nrA operations to achieve early benefits of reduced separation. if an operator has older airplanes that are not equipped with 1090eS and does not expect to receive future new airplanes, boeing recommends waiting for the implementation rules around the world to be finalized and published before upgrading and certifying new equipage.
Su M MARy

B O E i N g ’ S i N v O Lv E MENT W i T H A DS-B

boeing is working with air navigation service providers and other industry partners to collaboratively define the requirements for airborne equipage that supports ADS‑b.
An assessment is under way to define the transition plan for production airplanes to include the mandated Do‑260b capa‑ bility. Airlines and fleet operators will be required to retrofit their airplanes to meet the european ADS‑b mandates by 2015

ADS‑b is intended to transform Atc by providing more accurate and reliable tracking of airplanes in flight and on the ground. boeing is working with Atc providers and the standards communities around the world to enable new globally interoperable surveillance capabilities and to ensure that the appropriate ADS‑b equipment is available.
For more information, please contact william richards at william.r.richards@ boeing.com. A e r o q u A r t e r ly

q tr_02 | 10

Figure 3: Airborne situational awareness
Airborne situational awareness provides additional data to flight crews during flight operations to enhance flight safety and Atc efficiency. ADS‑b infor‑ mation is sent to a cDti for display to the pilot. the display represents other airplanes w ith a chevron (triangular symbol), which is oriented to represent the direction of travel, and shows airplane flight iD, altitude, and vertical trend vector to indicate that the airplane is climbing or descending. other data could be displayed, such as its ground speed and wake vortex category.

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

13

After December 20, 2010, airplane operators must ensure that all new repairs to fatigue‑critical structure receive a damage tolerance evaluation.

14

A e r o q u A r t e r ly

q tr_02 | 10

complying with the Aging
Airplane Safety rule by December 20, 2010, airlines that operate airplanes under title 14 of the code of Federal regulations (cFr) 121 or 129 must revise their u.S. Federal Aviation
Administration (FAA)‑approved structural maintenance program to comply with the FAA’s
Aging Airplane Safety rule (AASr). this revised maintenance program must include damage‑tolerance‑based inspections; a means to address the effects that repairs, alterations, and modifications may have on fatigue‑critical structure and these inspections; and a means by which all changes to the maintenance program receives FAA approval. boeing has developed materials to help operators comply with this new rule.
By Roxanne M. Pillo, AASr Deputy program manager, Fleet Support engineering Airframe, and
Amos Hoggard, technical Fellow (retired), AASr program

the Aging Aircraft Safety Act of 1991 passed by congress in 1991 — and later codified by the FAA as the AASr — requires airlines to ensure that repairs or modifications made to their airplanes are damage‑tolerant. As part of the requirement, airlines must have a damage‑tolerance‑based maintenance program in place by December 20, 2010. this includes the development of an FAA‑ approved operator implementation plan that contains the processes and timelines the operator will use for obtaining and incor‑ porating maintenance actions to address the effects of repairs and alterations. in order to comply with the AASr, operators will need to reassess their structural maintenance program and the way repair approvals are being considered.

retroactive aspects to this rule require surveys of all active airplanes for the purpose of documenting existing repairs, alterations, and modifications requiring damage tolerance inspections. Specific time periods have been established to obtain the inspection requirements for existing repairs, alterations, and modifications that currently lack the required damage tolerance inspections.
At least 4,000 airplanes (u.S.‑registered) and 240 operators are affected by this new rule. while only u.S.‑registered airplanes are affected at this time, the number of affected airplanes could more than double if the FAA rule is adopted by other regu‑ latory agencies, including the european
Aviation Safety Agency and transport

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

canada. currently, some operators of non‑u.S.‑registered airplanes intend to voluntarily comply with the AASr. boeing, working with the industry, has developed FAA‑approved methods of compliance to help operators meet the terms of the new rule. the AASr‑required changes are complex and require significant revision to the processes and procedures contained in existing maintenance pro‑ grams. this article provides regulatory background about the new rule, key provisions of the AASr, the compliance method developed by the commercial airline industry, and the information developed by boeing to support operator compliance with the new rule.
15

R E g u L ATORy B ACK g R O u N D A ND
R E q ui R EMENTS

the AASr was published, in part, to satisfy the Aging Aircraft Safety Act of 1991. the act requires air carriers to demonstrate that maintenance of an airplane’s age‑sensitive parts and components has been “adequate and timely enough to ensure the highest degree of safety.” the AASr requires operators to have a damage‑tolerance‑based structural maintenance program for each applicable transport category airplane operated in
14 cFr 121 and u.S.‑registered airplanes operated in 14 cFr 129. the requirement extends to the fatigue‑critical structure of the baseline, as‑delivered airplane structure, as well as to existing and future repairs and alterations that affect fatigue‑critical struc‑ ture. the rule affects all boeing 7‑series, mD, and Dc turbofan‑powered transport category airplanes. operators must comply with this rule by December 20, 2010. operators are expected to develop and gain FAA approval of an operator imple‑ mentation plan that details how the operator will comply with the requirements of the operational rules. this plan will consist of both new and existing operator‑specific processes the operator will use in demonstrating compliance, including:
■■

■■

■■

16

A process to identify repairs and alter‑ ations that will require damage tolerance inspections. (the FAA defines damage tolerance inspections as maintenance actions necessary to detect or preclude fatigue cracking that could contribute to catastrophic failure. Damage tolerance inspections are developed as a result of a damage tolerance evaluation.)
A process to obtain the inspection data and perform the needed inspections.
A process to conduct surveys of airplanes to determine whether existing repairs will require damage tolerance inspections.

to facilitate operator compliance to the operational rules and to assist in operator development of their implemen‑ tation plan, the FAA also has required type certificate holders and design approval holders to make available certain new and updated information under 14 cFr 26,
Subpart e, including:
■■

■■

■■

Documents defining fatigue‑critical structure. ■■ Fatigue‑critical baseline structure lists.
■■ Fatigue‑critical alteration structure lists. updated published information with damage‑tolerance‑based maintenance data for items affecting fatigue‑critical structure, including:
■■ Structural repair manuals.
■■ Fleet‑support service bulletins.
■■ master‑change service bulletins.
■■ Supplemental type certificates. model‑specific compliance documents that contain a repair evaluation guideline.

K E y P RO v i S i O NS A FFECT i N g
O PERATORS

New repair approvals to fatigue-critical structure. As of January 11, 2008, this covers any new or significantly revised repair, master‑change service bulletin, or supplemental type certificate approved by boeing on behalf of the FAA required and contained damage tolerance inspections. operators must adopt the damage tolerance provisions provided in the approval paperwork for these repairs and alterations for all new installations after
January 11, 2008. After December 20,
2010, it is the operators’ responsibility to ensure that all new repairs to fatigue‑critical structure receive a damage tolerance evaluation and are properly documented in the damage‑tolerance‑based mainte‑ nance program.
Existing repairs. existing repairs are defined as those installed prior to

December 20, 2010, that affect fatigue‑ critical structure and do not have approvals indicating a damage tolerance evaluation and the resulting damage tolerance inspections require further action. operators are expected to identify and document these repairs via an airplane survey. All airplanes delivered prior to
December 20, 2010, will require a survey to determine repairs to fatigue‑critical struc‑ ture that do not have damage tolerance inspections. the operator’s implementation plan will need to define how they will obtain and implement the damage tolerance inspections for these repairs.
Existing alterations. existing alterations are those installed prior to December 20, 2010, that affect fatigue‑critical structure and do not have approvals indicating a damage tolerance evaluation and the resulting damage tolerance inspections require fur‑ ther action. operators are expected to utilize the information provided by boeing or other design approval holders to ensure that a damage‑tolerance‑based maintenance program exists for all existing alterations.
A N i N D u S TRy- D E v E LOPED M ETHOD
O F C OMPL i A NCE

boeing participated in the Airworthiness
Assurance working group (AAwg) to establish a method of compliance that could be broadly supported by all stake‑ holders. the AAwg developed the initial draft of the FAA’s advisory circular for this rule, Ac 120‑93. boeing continues to participate in the AAwg to enable resolution and awareness of compliance issues at an industry level throughout the implementation of this rule.
After the final rule was published, boeing organized and held five model‑ specific Structures task group (Stg) meetings to guide development of the boeing documents that operators would use to assist them in the development of

A e r o q u A r t e r ly

q tr_02 | 10

Figure 1: AASR compliance process operators use boeing documents and their existing maintenance programs to develop implementation plans.

Type Certificate
(TC) or
Design Approval
Holder (DAH)

Operator

e xisting program oips

oips

revised program boeing

compile

plan

review

Deliver

baseline programs and FAA‑oversight‑ office‑approved boeing documents.

new operator implementation plans (oips) outline damage tolerance inspection and evaluation processes.

oips are reviewed by the principal maintenance inspector (pmi).

incorporation of the oip into the maintenance program is approved by the pmi by
December 20, 2010.

their implementation plan. the groups were organized according to AAwg guidelines, and each Stg had representation of approximately 60 percent of the active airplanes in a specific airplane fleet. the compliance process developed by these groups involves operators using boeing documents and their existing maintenance programs to develop operator implementation plans. these plans are reviewed and approved by the operator’s
FAA principal maintenance inspector (or local regulatory authority). the plan is then used as a means by which the damage tolerance data is aggregated and used to revise the maintenance program after
December 20, 2010 (see fig. 1).

i NFORMAT i O N F OR O PERATORS
P RO v i D ED B y B O E i N g

boeing has developed FAA‑approved methods of compliance to support operator compliance. As part of this effort, boeing is making available both new and updated model‑specific material to help ensure operator compliance with AASr (see fig. 2). the model‑specific information is currently available for purchase on the web portal myboeingFleet.com unless otherwise noted:
Compliance document and repair evaluation guidelines. the FAA required boeing to make available an FAA‑approved compliance document and repair evaluation guidelines to assist an operator in establish‑

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

ing damage‑tolerance‑based maintenance programs for existing repairs to fatigue‑ critical structure. this document is model specific and provides requirements for the operator to perform surveys and establish damage‑tolerance‑based maintenance programs for existing repairs using the boeing data listed below. in addition, the document establishes time periods for a variety of actions to be accomplished, including:
■■
■■

■■
■■

completion of surveys.
Determination of damage tolerance inspections. Accomplishment of first inspections.
Available grace periods.
17

Figure 2: New and updated publications to assist in operator compliance boeing has made these materials available to help airlines operating these models comply with the new
AASr. this table shows the document numbers for the various categories of published data.

Baseline Programs
Model

Maintenance
Planning Data
Structures/
Zonal
Programs

Maintenance
Planning Data/
Airworthiness
Limitations instructions (ALi)

Supplemental
Structural
inspection
Document
(SSiD)

Repair
Assessment
guidelines
(RAg)

Fatigue
Critical
Baseline
Structure
(FCBS)

Fatigue Critical
Alteration Structure
(FCAS)

Structural Repair
Manual (SRM)

Fleet Support
Collector Service
Bulletin (FSSB)

Douglas MoDels
717

me717‑0302

mDc‑96K9063

n/A

n/A

mDc‑08K9008

mDc‑08K9023‑Vol‑06

D634l201

717‑00‑0001

Dc‑8

meDAc‑336521 me8‑00032 n/A

Dm‑iS‑SiD‑8‑1

mDc‑91K0262

mDc‑08K9009

mDc‑08K9023‑Vol‑01 mDc‑08K9023‑Vol‑02 ‑50/‑60: tp‑8Srm
‑70: tp87Srm

Dc8‑00‑001

Dc‑9

me9‑0012

n/A

Dm‑iS‑SiD‑9‑1

mDc‑08K9010

mDc‑08K9023‑Vol‑01 mDc‑08K9023‑Vol‑03 tp‑9Srm

Dc9‑00‑001

mDc‑08K9011

mDc‑08K9023‑Vol‑04

tp‑9Srm

mD80‑00‑004

mDc‑08K9007

mDc‑08K9023‑Vol‑05

tp‑90Srm

mD90‑00‑001

mDc‑08K1002

mDc‑08K9023‑Vol‑01 mDc‑08K9023‑Vol‑07 ‑10: tp‑10Srm‑10
‑30: tp‑10Srm‑30
‑40: tp‑10Srm‑40 & tp‑10Srm‑4J Dc10‑00‑001

mDc‑08K1003

mDc‑08K9023‑Vol‑01 mDc‑08K9023‑Vol‑09 ‑10: tp‑10mD10Srm‑10
‑30: tp‑10mD10Srm‑30

mD10‑00‑002

mDc‑08K1004

mDc‑08K9023‑
Vol‑08

‑1F: tp‑11Srm‑1F
‑1p: tp‑11Sem‑1p
‑cF: tp‑11Srm‑cF

mD11‑00‑003

mDc‑91K0263 mD‑80 761‑93mSg22 me80‑0203 n/A

Dm‑iS‑
SiD‑80‑1

mD‑90

me90‑0402

mDc‑94K9000

n/A

Dc‑10

me10‑0081 me10‑382 n/A
Dm‑iS‑
SiD‑10‑1

mD‑10

me10‑0171 me10‑38‑orS2 me11‑0152

mDc‑K5225

mDc‑91K0264

mDc‑99K1082

mD‑11

n/A

n/A

n/A

7-series except 717
727

n/A

n/A

D6‑48040‑1

737‑100/‑200

n/A

n/A

D6‑37089

737‑300 /
‑400 /‑500

n/A

n/A

D6‑56167

D6‑84024

D6‑84179

D6‑82669

D6‑4062
D6‑15565

D6‑38669

D6‑84141

‑300: D6‑37635
‑400: D6‑38246
‑500: D6‑38441
D6‑84180

737‑00‑1006

‑600: D634A220
‑700: D634A201
‑700conV: D634A202
‑700igw: D634A330
‑800: D634D210
‑900: D634A211
‑900er: D634A213

737‑00‑1007

‑100/‑200/‑300: D6‑13592
‑Sp: D6‑34024

747‑00‑2157

next‑ generation 737

D626A001

D626A001‑9

747‑100/
‑200/‑300/‑Sp

n/A

n/A

747‑400

n/A

n/A

747‑400lcF

n/A

n/A

D926u121‑01

D634u105

747‑400bcF

n/A

n/A

D926u122‑01

D634u104

757

D622n001

D622n001‑9

n/A

n/A

D926A120‑01

D926u120‑01
D6‑841101
D6‑35022

n/A

D624u050‑03
D6‑841101

D6‑36181

n/A

D926n120‑01

‑400: D634u102
‑400F: D634u103
747‑00‑2157 cl
747‑00‑2158‑400

D190n001

‑200: D634n201
‑200pF: D634n210
‑200cb: D634n211
‑300: D634n230

757‑00‑0003

767‑00‑0048

777‑00‑0002

767

D622t001

D622t001‑9

n/A

n/A

D926t120‑01

D624t050‑02

‑200: D634t201
‑200SF: D634t202
‑300: D634t210
‑300bcF: D634t235
‑300F: D634t215
‑400: D634t225

777

18

727‑00‑0015

D622w001

D622w001‑9

n/A

n/A

D926w120‑01

D624w050‑01

‑200: D634w201
‑300: D634w210
‑F: D634w215

A e r o q u A r t e r ly

q tr_02 | 10

Additional documents unique to Douglas models:
Structural Repair Drawings Damage
Tolerance Summary

Dc‑8

mDc‑09K9014

Dc‑9, mD‑80, mD‑90, 717

mDc‑09K9015

Dc‑10, mD‑10, mD‑11

mDc‑09K1012

Master Change
Collector Service
Bulletin (MCSB)

Compliance
Document and
Repair Evaluation guidelines (CD/REg)

717‑00‑0023

mDc‑09K9009 & mDc‑09K90184 Dc8‑00‑0023

mDc‑09K9010 & mDc‑09K90184 Dc9‑00‑0023

mDc‑09K9011 & mDc‑09K90184 mD80‑00‑0033

mDc‑09K9012 & mDc‑09K90184 mD90‑00‑0023

mDc‑09K9013 & mDc‑09K90184 Dc10‑00‑0033

mDc‑09K1009 & mDc‑09K90184 mD10‑00‑0043

mDc‑09K1010 & mDc‑09K90184 mD11‑00‑0043

mDc‑09K1011 & mDc‑09K90184 727‑00‑00162

D6‑84300 &
D6‑843403

737‑00‑10082

D6‑84301 &
D6‑843403

737‑00‑10092

D042A525 &
D6‑843403

747‑00‑21552

D926u200‑01 &
D6‑843403

757‑00‑00042

D042n521 &
D6‑843403

767‑00‑00492

D926t242‑01 &
D6‑843403

Fatigue-critical structure. boeing has made available lists of fatigue‑critical baseline struc‑ ture for all affected models. the FAA has defined fatigue‑critical structure as “airplane structure that is susceptible to fatigue crack‑ ing that could contribute to a catastrophic failure. [it] includes structure that, if repaired or altered, could be susceptible to fatigue cracking and contribute to a catastrophic failure. Such structure may be part of the baseline structure or part of an alteration.” operators can use the lists provided by boeing to determine whether a repair or an alteration requires a damage tolerance eval‑ uation and the development of damage tolerance inspections. boeing has also made available lists of fatigue‑critical alteration structure for those master changes and sup‑ plemental type certificates held by boeing.
Published data. boeing has updated published repair and alteration data for all applicable models to include damage tolerance inspections. this includes structural repair manuals, fleet‑support service bulletins, master‑change service bulletins, and boeing‑held supplemental type certificates. the damage tolerance inspections for service bulletins have been published in a single service bulletin collec‑ tor document for each airplane model. in the future, when individual service bulletins
(listed in the service bulletin collector docu‑ ment) are revised, the damage tolerance inspection information will be included in the new release and the information in the collector document will no longer apply.
(collector documents for master‑change service bulletins will be generated upon request and customized to reflect operator‑

specific configurations. operators purchase a master‑change collector document by submitting a request for proposal to boeing.)
Boeing AASR seminar. boeing is also conducting AASr seminars focusing on the steps necessary to establish compliance with the new operational rules and the boeing publications developed to support operator compliance. Availability can be found at http://active.boeing.com/ nosearch/svceng/seminars.cfm. Su M MARy

A major change to structural maintenance programs for all 7‑series, Dc, and mD transport category airplanes operated under cFr 121 and 129 will be required on December 20, 2010. the FAA rule change requires operators to have damage‑tolerance‑based maintenance programs for affected transport category airplanes and requires a physical survey of airplanes to obtain damage tolerance data for repairs and alterations. boeing has published new and updated material to help operators comply with this new rule. All boeing data needed by operators to comply with the new rule is available for purchase on myboeingFleet. com, except for customized master‑change service bulletins, which are available by request. boeing is conducting seminars on this subject
For more information, please contact roxanne pillo at roxanne.m.pillo@ boeing.com. FootnoteS: Dc, mD and 717
1
on airplane maintenance planning document for use in mSg‑2 maintenance programs.
2
maintenance planning data document for use in mSg‑3 maintenance programs.
3
collector for all master changes. operators will receive a unique document and document number based on their particular fleet.
4
equivalency guidelines referenced in the cD/reg document.
FootnoteS: 7‑series except 717
D6‑84110 is the list of alteration service bulletins that affect FcbS and FcAS.
2
collector for all master changes. operators will receive a unique document and document number based on their particular fleet.
3
equivalency guidelines referenced in the cD/reg document.
1

777‑00‑00032

D926w221‑01 &
D6‑843403

n/A = not applicable

19

the collaboration process involves the exchange of information and knowledge using the Fleet team bulletin board, meetings, and teleconferences.

new tool for collaboration on in‑Service issues
For more than 10 years, boeing has been working with airplane owners and operators to address in‑service issues using Fleet team processes and the Fleet team resolution process (Ftrp) and Fleet team emerging issues (Ftei) bulletin boards. boeing recently introduced a new collaboration platform that integrates these two bulletin boards within a single application: the Fleet team Xchange. the platform includes a number of new features and has the capacity to support the future integration of additional collaboration spaces for special working groups.
By Sue Jacintho, Airplane Systems Design engineer, and
Krijn de Jonge, 757/767 Fleet chief

boeing has developed a new tool to collaborate with airplane owners and operators on issues, best practices, and solutions. the Fleet team Xchange provides enhancements while preserving the core functionality of the previous Ftrp and Ftei applications. this article explains the new collaboration tool and provides an overview of its use.
Ev O L u T i O N O F T HE
C OLLABORAT i O N P ROCESS

in 1999, boeing launched the Ftrp bulletin board, a tool to gain customer involvement in addressing in‑service economic issues. boeing and operators use the data posted

on the bulletin board to determine fleet‑ wide impact of issues and to pursue efficient solutions together. these solutions include airplane modifications that are addressed in airplane or component service bulletins and sharing of best practices. based on the Ftrp, boeing subsequently introduced the Ftei bulletin board to raise awareness of safety issues, engage oper‑ ators in the resolution of these issues, and supplement the Air transport Association of America (AtA) lead airline process.
As part of the Fleet team process, boeing launched the Fleet team Digest
(FtD) and model‑specific teams, meetings, and conference calls. the FtD articles provide the latest information about economic issues, all safety issues, in‑service

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

events, fleet improvements, and other major projects. During meetings and conference calls, the model‑specific teams review posted issues and responses, discuss which items need to be worked, and collaborate on their resolution. ten years after their introduction, boeing
Fleet team tools are utilized by more than
5,000 users at more than 500 companies worldwide and are among the most fre‑ quently accessed programs on the web portal myboeingFleet.com. more than
6,000 FtD articles are available via myboeingFleet.com. (Additional information about the
Fleet team processes can be found in
AERO third‑quarter 2000 and second‑ quarter 2007.)
21

Figure 1: Fleet Team Xchange user home page the home page contains three panes similar to the Ftrp and Ftei applications: (1) a static pane in the upper left, (2) a navigation pane on the left side of the screen, and (3) a main pane that occupies the majority of the screen. when a team member logs in, three tabs are shown in the main pane: news/events, recent Activity, and to‑Do‑list (4).

1
4

3

2

A new wiki feature enables users to contribute information to refine issues. once an issue is published, other users can edit the wiki to add relevant information and solutions. the new application supports expanded bulletin‑ board discussions for each issue.

T H E N E W F L EET T E AM X C HAN g E

Fleet team Xchange, which boeing intro‑ duced in December 2009, is a collaboration tool that integrates the Ftei and Ftrp bulletin boards. it offers new and enhanced features and functions specifically designed to address user requests and requirements, while preserving the core functionality of the two previous applications. the issues on the new bulletin board are categorized either as economic (Fte) or safety (FtS). operators who have used the Ftrp and Ftei applica‑ tions will see a familiar home page when they log in to Fleet team Xchange (see fig. 1). to enhance the collaboration process, several new capabilities have been incorporated in the new tool, including drafts, a wiki feature, and e‑mail. once an issue has been published by one operator, other users may contri‑ bute to and update the content for that specific issue by using the new wiki feature, by adding to the discussion, or both. the users can co‑author and co‑edit the col‑ laborative issue article (i.e., wiki). each wiki is intended to capture and retain knowl‑ edge and integrate best practices. the discussion thread complements each collaborative article and is intended to capture ideas, experiences, data, and comments that are worth sharing but do not need to be integrated into the article.
Detailed impact data can be entered for each item that is posted. when other oper‑ ators post responses and their impact data, a summary is shown. once a solution for a
22

specific issue is available, operators can share their opinion about the value in terms of cost, ease of implementation, and overall effectiveness. item‑level access via e‑mail is provided as needed to suppliers and partners.
T H E F L EET T E AM
C O LLABORAT i O N P R OCESS

the collaboration process involves the exchange of information and knowledge using the new Fleet team bulletin board and ongoing Fleet team meetings and teleconferences. All operators are invited to participate in the Fleet team meetings and teleconferences. the solutions that are jointly developed are documented and published on myboeingFleet.com, in service bulletins or service letters, and in
FtD articles. the collaboration takes place in three distinct areas (see fig. 2):
Operator Domain. within a specific com‑ pany, team members work together to identify and document economic issues. they may also work together on responses to economic and safety items that have already been published on the bulletin board. while in the operator Domain, the information is in draft stage and is not visible to other operators or boeing.
Boeing Domain. boeing team members work together to provide input to economic issues that have been posted by the oper‑ ators. they also prepare new postings and updates for items that boeing has deter‑

mined to be safety issues. Draft information within the boeing Domain is not visible to the operators.
Shared Domain. the items and responses that have been published can be accessed by all operators and boeing. new economic issues are posted as “Discussion” items.
During Fleet team meetings and telecon‑ ferences, model‑specific teams discuss the posted items. based on information and impact data that have been posted, the teams also decide which items need to be elevated to “in‑work” status. Safety items are automatically posted by boeing as
“in‑work” items. For items at this stage, the teams collaborate on root cause analyses, documentation of best practices, and development of solutions. updates are also provided in FtD articles. once resolved, the status for the items may be changed to
“evaluation” or “complete.”
Su M MARy

the new boeing Fleet team Xchange provides enhanced features and improved performance. boeing encourages all operators to be involved in the Fleet team process and collaborate by sharing information and knowledge on this new bulletin board, and by participating in the
Fleet team meetings and teleconferences.
For more information, please contact Krijn de Jonge at krijn.dejonge@boeing.com.

A e r o q u A r t e r ly

q tr_02 | 10

Figure 2: The Fleet Team collaboration process
Fleet team Xchange facilitates collaboration among airplane operators and boeing.

OPERATOR DOMAiN (PRivATE)

BOEiNg DOMAiN (PRivATE)

new issues are drafted and published privately via collaborative article and discussion threads.

new issues are drafted and published privately via collaborative article and discussion threads.

Operator Economic issues

Fleet Safety and Economic issues

maintenance engineers, reliability engineers, and/or mechanics draft a new issue or draft an addition to an existing issue.

Draft

Draft

the operator focal publishes the new issue or the revision to the existing issue.

publish

publish

SEMiPRivATE DOMAiN published issues can be accessed by operators and boeing.

Service engineers, design engineers, and/or service‑related problem (Srp) managers draft a new issue or draft an addition to an existing issue.

the boeing focal publishes the new issue or the revision to the existing issue.

economic issues are posted as
“Discussion” items.

Discussion

committee review

Fleet safety issues are posted as
“in‑work” items.

in‑work

committee review

evaluation or complete SEMiPuBLiC DOMAiN resolved issues are documented and made available on myboeingFleet.com.
Fleet team Digest
(boeing article)

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

maintenance and operations documents (boeing/supplier document) 23

Decisions on which type of approach to use vary with each airline, and sometimes even for each flight.

24

A e r o q u A r t e r ly

q tr_02 | 10

Fuel conservation
Strategies: Descent and
Approach
the descent and approach phases of flight represent the flight crew’s final opportunities to reduce fuel consumption during flight. by carefully planning the airplane’s descent and appropriately using drag and high lift devices, the flight crew can ensure a safe landing while saving fuel.
By William Roberson, chief pilot research, and
James A. Johns, Flight operations engineer, Flight operations engineering

This article is the fourth and final in a series exploring fuel conservation strategies. It discusses strategies for saving fuel during the descent and approach phases of flight.
The first article in this series, “Cost Index
Explained,” appeared in the second-quarter
2007 Aero. It was followed by “Cruise
Flight” in the fourth-quarter 2007 issue and
“Takeoff and Climb” in the fourth-quarter
2008 issue.
Fuel conservation is a significant concern of every airline. An airline can choose an approach procedure and flap setting policy that uses the least amount of fuel,

but it should also consider the trade‑offs involved with using this type of procedure. in this article, two types of approaches are analyzed: the standard approach and the low‑drag or delayed‑flaps approach. the cost of a missed approach is also discussed.
T H E S TANDARD A PPROACH

boeing flight crew training manuals and/or flight crew operating manuals (Fcom) define standard approach profiles for every boeing model. these profiles include specific flap settings and when to select

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

them during various parts of the approach
(see fig. 1).
T H E L OW - D RA g O R D ELAy E D - F LAPS
A PPROACH

if the approach is not being conducted in adverse conditions that would make it difficult to achieve stabilized approach criteria, the final flap selection may be delayed until just prior to 1,000 feet above field elevation (AFe) to conserve fuel and reduce noise and emissions or to accom‑ modate speed requests by air traffic control. this approach is known as a low‑drag,

25

Figure 1: Standard approach profile for 737 models boeing flight crew training manuals and/or operating manuals include specific instructions for standard approaches.

on rADAr vectors
■■ Heading select
■■ pitch mode (as needed)

Approaching intercept heading
■■ Flaps 5
Flaps 5 intercept heading instrument landing System tuned and identified
■■ localizer and glide slope pointers shown
■■ Arm approach
■■ Second autopilot (A/p) command
(dual A/p)

Flaps 1

■■

en route to fix lateral navigation or other roll mode
■■ Vertical navigation or other pitch mode
■■

note: Dual A/p is available during a two‑engine approach only. localizer capture
Final approach course heading ■■

glide slope alive gear down
■■ Flaps 15 (final flap for one engine)
■■ Arm speedbrake
■■

glide slope intercept landing flaps (two engine)
■■ Set missed approach altitude
■■ Do the landing checklist

Fix (locator outer marker, marker, distance measuring equipment)
■■ Verify crossing altitude

■■

500 feet
■■ Verify Autopilot Flight
Director System status
(dual A/p) minimum use height for single
A/p (see limitations chapter)
■■ Disengage A/p and auto throttles

touchdown
Disengage A/p
(dual A/p)

■■

26

A e r o q u A r t e r ly

q tr_02 | 10

Figure 2: Fuel savings estimates for delayed-flaps approach procedure the delayed‑flaps approach uses 15 to 380 fewer pounds of fuel than the standard approach with the same flap setting.

AirplAne engine

lAnDing weigHt lbS (Kg)

lAnDing FlAp
(Deg)

30
737‑800 cFm56‑7b24

120,000 (54,431)
40

25
747‑400 cF6‑80c2b1F

450,000 (20,411)
30

25
767‑300 cF6‑80c2b4

270,000 (122,469)
30

25
777‑200 ge90‑94b

450,000 (204,411)
30

delayed‑flaps, or noise‑abatement approach. the actual steps to use vary by airplane model and are described in the Fcom, flight crew training manual, or airline stan‑ dard operating policy. these are the general steps for the 737, 757, 767, and 777:
■■

737: intercept the glide slope with gear down and flaps 15 at flaps 15 speed.
757/767/777: intercept the glide slope with gear down and flaps 20 at flaps
20 speed. note: the thrust required to descend on the glide slope may be near idle.

■■

■■

proceDure

Fuel burneD lbS (Kg)

Standard

230 (104)

Delayed

213 (97)

Standard

266 (121)

Delayed

230 (104)

Standard

590 (268)

Delayed

540 (245)

Standard

610 (277)

Delayed

230 (104)

Standard

400 (181)

Delayed

370 (168)

Standard

440 (200)

Delayed

390 (177)

Standard

850 (385)

Delayed

790 (358)

Standard

920 (417)

Delayed

820 (372)

Approaching 1,000 feet AFe, select landing flaps, reduce the speed to the final approach speed, and then adjust thrust to maintain it. perform the landing checklist.

note for the 757/767/777: in particularly noise‑sensitive areas, use the technique above but delay extending the landing gear until 1,500 feet AFe.

www.boeing.com/c o m m e r c i A l / A e r o m A g A z i n e

Fuel DiFFerentiAl lbS (Kg)

17 (8)

36 (16)

50 (23)

380 (172)

30 (14)

50 (23)

60 (27)

100 (45)

Fu E L S Av i N g S A SSOC i ATED W i T H
D ELAy E D - F LAPS A PPROACH

Depending on the flap setting and airplane model, the delayed‑flaps approach uses 15 to 380 fewer pounds of fuel than the standard approach with the same flap setting (see fig. 2). to repeat, this approach should only be conducted in conditions that do not make it difficult to achieve a stabilized approach criteria.

27

Figure 3: Additional fuel burn attributed to missed approaches

ADDitionAl Fuel burn lbS (Kg)

737‑800 cFm56‑7b24

280 (127)

747‑400 cF6‑80c2b1F

1,400 (635)

767‑300 cF6‑80c2b4

610 (277)

777‑200 ge90‑94b

the fuel burned during one missed approach is equivalent to 2 to 28 times the fuel burn required for a descent and approach.

AirplAne/engine

880 (399)

T H E C OST O F A M i S SED A PPROACH

planning an approach to minimize fuel consumption Seven key points should be considered when planning an approach and descent to minimize fuel consumption:
1. plan the descent carefully.
2. Start the descent at the proper point. 3. Fly the most economical speed.
4. use idle thrust for descents.
5. Avoid flying extended periods at low altitudes.
6. configure flaps and gear for landing at the optimal time.

Although reduced‑flap, delayed‑flap, or low‑drag approach procedures can save an airline significant amounts of fuel over time, if these procedures are inappropriately applied resulting in a missed approach, the subsequent additional fuel burn required for the missed approach and additional flight pattern with nullify all the fuel saving efforts employed on the entire flight. it cannot be overemphasized that the first priority of the crew is to fly the descent and approach safely and to be in a position to land at the appropriate time. the typical missed‑approach procedure is to apply go‑around thrust, retract the flaps and gear while climbing to a minimum of 1,500 feet AFe, and accelerate to a minimum of flaps‑up maneuvering speed.
Depending on the airplane model and landing flap configuration, the fuel burned during one missed approach is equivalent to 2 to 28 times the fuel burn required for a

descent and approach (see fig. 3). there will also be the fuel required to fly an additional traffic pattern.
Su M MARy

Flight crews can vary their approach procedures and flap selections to match the flight’s strategic objectives, which almost always include fuel conservation, noise abatement, and emissions reduction.
Decisions on which type of approach to use vary with each airline, and sometimes even for each flight. boeing Flight operations engineering assists airlines’ flight operations depart‑ ments in planning low‑drag approaches for any airport in the world. For more information, please contact Flightops. engineering@boeing.com. 7. use the most appropriate final flaps setting for landing.

28

A e r o q u A r t e r ly

q tr_02 | 10

w ww.boeing.com/commercial/aeromagazine

Similar Documents

Premium Essay

Boeing

...Boeing is one of the leaders of the aerospace industry. Boeing makes a wide assortment of aircraft which includes military crafts, commercial aircraft and even weapons such as missiles. Boing also designs and manufactures electronic and communication systems. Boeing is major service provider for NASA and operates the Space Shuttle and International space station. Boeing is successful and owes a large portion of that success to its ability to plan around complicated issues such as legal and ethical standards. Boeing has to comply with legal requirements that make planning a challenge at times. Boeing must handle internal and external affairs which can either shine a negative light on the company or a positive one. An example of this is a lawsuit that was filed in 2000 that claimed pay differential between the two genders at Boeing. Though there was evidence that supported the claim of pay differential, Boeings lawyers were able to protect the company from public scrutiny. The case was settled out of court. Boeing is well known for its dedication to social responsibility. Boeing has been philanthropic and will likely continue to be. The company is a member of the Foundation for Corporate and Social Responsibility. Some examples of its efforts in the community are the refurbishing of the Chicago Air and Water show and the Royal Aeronautical Society in London. Economic conditions have a direct impact on Boeing and its planning. With the economy at a down swing and airlines...

Words: 567 - Pages: 3

Premium Essay

Boeing

...Introduction Founded by William Boeing in Seattle, Washington, United States on July 15, 1916. Boeing is the world's largest aerospace company and leading manufacturer of commercial jetliners and defence, space and security systems. A top U.S. exporter, the company supports airlines and U.S. and allied government customers in 150 countries. Boeing products and tailored services include commercial and military aircraft, satellites, weapons, electronic and defence systems, launch systems, advanced information and communication systems, and performance-based logistics and training. Boeing employs more than 165,000 people across the United States and in more than 65 countries. What Boeing Does Today • Design, assemble and support commercial jetliners – Boeing 7-series family of airplanes leads the industry – Commercial Aviation Services offers broad range of services to passenger and freight carriers • Design, assemble and support defence systems – World’s largest designer and manufacturer of military transport, tankers, fighters and rotorcraft – Global Services & Support provides services to government customers worldwide • Design and assemble satellites and launch vehicles – World’s largest provider of commercial and military satellites; major service provider to NASA and prime contractor for the International Space Station • Integrate and support large-scale systems, develop networking technology and network-centric solutions • Provide financing solutions focused...

Words: 1794 - Pages: 8

Premium Essay

Boeing

...Running head: DIVERSITY AND THE BOEING COMPANY The Boeing Company, the Struggle to the Top Introduction to the Boeing Company Boeing is one of the greatest aeronautical companies in the world and they have developed many innovative products and are using the most state of the art managerial, engineering and research known to man. “Boeing is the world's leading aerospace company and the largest manufacturer of commercial jetliners and military aircraft combined. Additionally, Boeing designs and manufactures rotorcraft, electronic and defense systems, missiles, satellites, launch vehicles and advanced information and communication systems. As a major service provider to NASA, Boeing operates the Space Shuttle and International Space Station. The company also provides numerous military and commercial airline support services. Boeing has customers in more than 90 countries around the world and is one of the largest U.S. exporters in terms of sales.”(Boeing.com) “Boeing is organized into two business units: Boeing Commercial Airplanes and Boeing Defense, Space & Security. Supporting these units is Boeing Capital Corporation, a global provider of financing solutions; the Shared Services Group, which provides a broad range of services to Boeing worldwide; and Boeing Engineering, Operations & Technology, which helps develop, acquire, apply and protect innovative technologies and processes.”(Boeing.com) I have worked for the Boeing Company’s Defense, Space &...

Words: 2477 - Pages: 10

Premium Essay

Boeing

...Boeing Synopsis The Boeing Company is an American multinational aerospace and defense corporation founded in 1916. According to its website, Boeing is the world's leading aerospace company and the largest manufacturer of commercial jetliners and military aircraft combined. Boeing also designs and manufactures rotorcraft, electronic and defense systems, missiles, satellites, launch vehicles and advanced information and communication systems. Boeing is a major service provider to NASA and the prime contractor for the International Space Station as well. The Boeing Company is best known to the general public for its line of civilian aircraft, the most famous being the Boeing 747. Military sales of $27bn comprise more than half of company revenue, making Boeing the second largest defense manufacturer in the world. Military products include the C-17 Globemaster Transport, F-15 Fighter, AH-64 Apache Attack Helicopter, MH-47 Chinook Helicopter and the Hellfire Missile. The company is the main contractor for the Star Wars missile system. In 2013, Boeing reported total revenues of $81.7 billion dollars. The company operates in over 90 countries and claims the title of America's largest exporter. It has three divisions: commercial airplanes, Integrated Defense Systems (IDS), and Boeing Capital Corporation. Of the three divisions, the most prominent is the commercial airplane section. Boeing was originally founded in Seattle Washington but is now headquartered in Chicago Illinois...

Words: 315 - Pages: 2

Premium Essay

Boeing

...company profile as this will help you to understand where the company stands in the market place and the importance of how they handled the project. I hope you like airplanes, as it would help with enjoying this project. Introduction:- Boeing is the world's leading aerospace company and the largest manufacturer of commercial jetliners and military aircraft combined. Additionally, Boeing designs and manufactures rotorcraft, electronic and defense systems, missiles, satellites, launch vehicles and advanced information and communication systems. As a major service provider to NASA, Boeing operates the Space Shuttle and International Space Station. Corporate Profile: 1. Boeing corporate office is located in Chicago, Illinois. 2. Boeing employs more than 158,000 people across the United States and in 70 countries 3. Manufactures commercial and military aircraft, designs and manufactures rotorcraft, electronic and defense systems, missiles, satellites, launch vehicles and advanced information and communication systems. Boeing also operates the Space Shuttle and International Space Station. 4. Boeing outsource some of their manufacturing to national and foreign suppliers and assemble and manufacture in their Everett plant in Washington. 5. Boeing aggressively advertises its Commercial Airplanes' and run a special television add on Memorial Day to honor veterans. 6. A TV ad on Memorial Day as a reminder of their military involvement and advertise their commercial airplanes worldwide...

Words: 1356 - Pages: 6

Premium Essay

Boeing

...Boeing Rocked by Scandal Jerry Gosh PHL/323 April 25, 2010 Chuck Thompson The Boeing Scandal In a New York Times, article my eyes affixed on a topic about The Boeing Company. Since the merger of McDonnell Douglas Corporation and Boeing, Boeings reputation started a downward spiral of ethical misconduct that tarnished the company, causing the companies aircraft market to plummet. The ethical misconducts lead to the resignation of Boeings chief executive, Philip M. Condit, in 2003. The world's largest aerospace company needed to change its reputation fast to stop the onset possibility of a corporation sell out of even worst the end to the Boeing corporation. Boeing called Harry C. Stonecipher out of retirement to be the next chief executive. Mr. Stonecipher was the key person who helped lead the merger of McDonnell Douglas Corporation and Boeing back in 1997. The number 1 priority is to restore Boeings credibility of these two areas, Defense Department, and Boeings civilian customers. The struggles of a company, long admired as one of the greatest American industrial successes, as it tries to expand its military business to compensate for losses to a European rival, Airbus, in commercial aircraft. During investigations, the chief financial officer, Michael Sears, for Boeing was dismissed for connections of ethical misconduct (Bowermaster, 2003). The investigations uncovered business dealings of misappropriation of funds proposed in supplying refueling tanker...

Words: 691 - Pages: 3

Premium Essay

Boeing

...Boeing is the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. A top U.S. exporter, the company supports airlines, U.S., and allied government customers in 150 countries. Boeing products and tailored services include commercial and military aircraft, satellites, weapons, electronic and defense systems, launch systems, advanced information and communication systems, and performance-based logistics and training. Boeing has an overarching company Vision, which provides a broad and lofty inspiration goal to its employees. The Boeing Company Vision is: "People working together as a global enterprise for aerospace leadership." Beyond the reference to leadership, the company Vision doesn’t provide much specific guidance, so Boeing employees are also provided with a set of Boeing Business Imperatives, which Boeing believes will help the company achieve its vision. The Boeing Business goals are: - Detailed customer knowledge and focus that understand, anticipate and respond to customer needs. - Large-scale systems integration that continually develops and advances technical excellence. - A lean enterprise characterized by efficiency, supplier management, short cycle times, high quality and low transaction costs. Boeing is organized into two business units: Boeing Commercial Airplanes and Boeing Defense, Space & Security. Supporting these units are Boeing Capital Corporation, a global provider of financing...

Words: 288 - Pages: 2

Premium Essay

Boeing

...THE BOEING 7E7 Teaching Note Synopsis and Objectives In 2003, the Boeing Company announced plans to build a new “super-efficient” commercial jet called the “7E7” or “Dreamliner.” This was a “bet the farm” gamble by Boeing, similar in magnitude to its earlier introductions of the 747 and 777 airliners. The technological superiority of the new airframe, as well as the fact that it would penetrate a rapidly growing market segment, were arguments for approval of the project. On the other hand, the current market for commercial airplanes was depressed because of terrorism risks, war, and SARS, a contagious illness that resulted in global travel warnings. Boeing’s board of directors would need to weigh those considerations before granting final approval to proceed with the project. The task for students is to evaluate the 7E7 project against a financial standard, the investors’ required returns. The case gives internal rates of return (IRR) for the 7E7 project under base-case and alternative forecasts. The students must estimate a weighted-average cost of capital (WACC) for Boeing’s commercial-aircraft business segment in order to evaluate the IRRs. As a result of that analysis, the students identify the key value drivers and distinguish, on a qualitative basis, the key gambles that Boeing is making. The general objective of this case is to exercise students’ skills in estimating a weighted-average cost of capital and cost of equity. The need for students...

Words: 7346 - Pages: 30

Premium Essay

Boeing

...is a daily focus at Boeing Corporation. The organization faces daily challenges to produce products to fit the consumer wants for air travel, comfort, and efficiency. While Boeing deals with a constant need for innovative ideas it also deal with the challenges of its main competitor airbus whom has historically been subsidized by many of the European nations to compete with Boeing for a larger share of the market. Boeing management, through excellent planning, an ethics policy that demands large returns for shareholders, and constant work to comply with ever changing legal demands of the industry has led to the constant success of the company. "It was the jet Boeing didn't build that averted what could have become one of the worst crash landings in the company's 91-year history--and cleared Boeing to conquer the skies again."(Masters, 2007). Boeing's Management team's work hard to plan what project's will be best for customers, lead to the largest returns to shareholders, and keep a reputation of being a world leader in the aviation industry. "In October 2002, executives of the aircraft manufacturer met with a group of global airline representatives at a conference center on the Seattle waterfront. The executives were trying desperately to figure out what to build next to hold off a soaring Airbus."(Masters, 2007) Boeing had made plans to build a high speed jetliner prior to this meeting. Through careful planning and expert decision making Boeing officials found that...

Words: 1448 - Pages: 6

Premium Essay

Boeing

...Business Study Report: Boeing Table of Contents 1. Executive Summary 3 2. Introduction 4 3. Introduction to the Business and General Business Environment 5 3.1 Major Customers of Boeing 5 3.2 Competitors of Boeing 5 3.3 Business Environment 6 3.4 Market Structure: Oligopoly 7 4. Production Costs and Scale 7 5. Macro Business Environment 9 6. Sustainability Practices of the Business 12 6.1 Sustainability in the Production Process 12 6.2 Sustainability in the Consumption of the Goods 12 7. Conclusion 13 References 15 1. Executive Summary This report has been developed for Boeing, which is the leading manufacturing company of airplanes, space-crafts and defense systems. The main quest of this report is to explore the business and the general business environment. It has also covered the major competitors of the company and the demand curve. The report has also covered the fixed and variable costs of the business and how it has affected the cost structure of the business. The report has also explored the macroeconomic environment in which Boeing is operating and what implications it has on the business of the company. Further, the report has also included the sustainability practices of Boeing and its initiatives to reduce the negative effects on the environment from its product. 2. Introduction Boeing is a multinational corporation with its roots in Seattle, USA that manufactures and design airplanes, satellites and space shuttles. It is the largest manufacturing company...

Words: 3772 - Pages: 16

Premium Essay

Boeing

...Case Study: Boeing 42 The long list of Boeing's woes seems to have reached its pinnacle in late 2003 with the scandal surrounding the Pentagon deal that alleged inappropriate behavior and the loss of documents by Boeing officials. After his seven-year reign at the head of the organization, December 2003 saw the eventual resignation of Phil Condit. Many breathed a sigh of relief at the news. The problems at Boeing were reportedly endless. From a stock price that had decreased by 6.5 percent while the company was under his leadership to increasing competitive pressures, the future for Boeing was in doubt and changes were needed. For many years Boeing graced American corporate news for their prowess as the leading manufacturer of aircraft. However, in 1994 Airbus—their main rival—booked more orders. This shocked the management executives and began a series of changes that were implemented to overcome the bureaucratic structure, outdated technological systems, and unnecessary processes in a company that had reportedly changed little since World War II. THE BEGINNING OF CHANGE AT BOEING In 1997 market demand increased dramatically and Boeing attempted to meet this surplus of orders by doubling their production capabilities instantaneously. A manufacturing crisis ensued and Boeing's reputation took a dramatic turn for the worse when they were required to halt production of the 747 aircraft for 20 days. The company had “stubbed its toe,” according to the then-president of the Commercial...

Words: 1159 - Pages: 5

Free Essay

Boeing

...THE BOEING 7E7 Teaching Note Synopsis and Objectives In 2003, the Boeing Company announced plans to build a new “super-efficient” commercial jet called the “7E7” or “Dreamliner.” This was a “bet the farm” gamble by Boeing, similar in magnitude to its earlier introductions of the 747 and 777 airliners. The technological superiority of the new airframe, as well as the fact that it would penetrate a rapidly growing market segment, were arguments for approval of the project. On the other hand, the current market for commercial airplanes was depressed because of terrorism risks, war, and SARS, a contagious illness that resulted in global travel warnings. Boeing’s board of directors would need to weigh those considerations before granting final approval to proceed with the project. The task for students is to evaluate the 7E7 project against a financial standard, the investors’ required returns. The case gives internal rates of return (IRR) for the 7E7 project under base-case and alternative forecasts. The students must estimate a weighted-average cost of capital (WACC) for Boeing’s commercial-aircraft business segment in order to evaluate the IRRs. As a result of that analysis, the students identify the key value drivers and distinguish, on a qualitative basis, the key gambles that Boeing is making. The general objective of this case is to exercise students’ skills in estimating a weighted-average cost of capital and cost of equity. The need...

Words: 7290 - Pages: 30

Free Essay

Boeing

...WHAT CHALLENGES AND OPPORTUNITIES DID BOEING FACE IN THE LATE 1990s? Boeing wanted to save billions of dollars and reduce developmental time which led them to lose their market share to Airbus. In hindsight Boeing should have reduced airfare and focused more on innovation landing them a head of their competitors. Instead it cost them billions, put them three years behind schedule and allowed Airbus to succeed. Seeing their mistakes, Boeing turned it around by creating an aircraft that would add value to the consumer and generate profits for the company. Boeing took the opportunity to research composite materials to improve passenger cabin comforts and an overall flying experience compared to the aluminium they had been using previously. Then Boeing wanted to add value to the consumer. Using the new composite materials and upgrading the electrical system to lithium-ion batteries fuel surcharges were reduced and Boeing was able to pass along the savings to the consumers. The increased durability of the aircraft also led to reduced maintenance costs therefore reducing the replacements necessary and in turn having cost saving effects for Boeing and the consumer. Consumers were happy and stock prices increased. Although things appeared to be going wonderfully, there was a huge concern with overheating batteries and it needed to be rectified as soon as possible. Because the batteries were outsourced, there should hae been support integrated ito the design plan for maintenance...

Words: 953 - Pages: 4

Free Essay

Boeing

...Appendix Beta βL=1+1-tDE∙βU →βU =βL1+1-tDE = 1.62/ (1+ (1-0.35)× 0.525 =1.21 1.21 = % of commercial × (βcommercial) + % of defense × (β defense) * Unlevered Defense Beta (βud ) From the information of Exhibit 10, we derived the Boeing’s unlevered defense beta by using the average of comparable firms’ beta. | Lockheed Martin | Northrop Grumman | 60 trading days NYSE Beta | 0.37 | 0.30 | Tax rate | 0.35 | 0.35 | Market-value debt/equity ratios | 0.410 | 0.640 | Unlevered Beta | 0.29 | 0.21 | Average Unlevered Defense Beta (βud ) = 0.29+0.212 = 0.25 * Unlevered Commercial Beta (βuc) 1.21 = % of commercial × (β commercial) + % of defense × (β defense) Input data from Exhibit 1, % of commercial and defense are weighted by revenues and profit. % of commercial =$28,387+$2,847$54,069+$3.868 = 0.54 % of defense = 1- 0.54 = 0.46 1.21 = 0.54 ×(β commercial) + 0.46 × 0.25 Unlevered β commercial(βuc) = 2.02 * Levered Commercial Beta (βLC) = 1+1-tDE∙βU = 1+1-0.35× 0.525∙2.02 = 2.71 Equity Market Risk Premium (EMRP) Long term EMRP is 8.4% Return on Equity Based on CAPM Model, re= rf+β∙EMRP rf=0.85% (3 month Treasury Bill rate) β =2.71 EMPR =8.4% re=0.85%+2.71×8.4%=23.61% Return on Debt rd = 5.8562% WACC WACC = DV×rd ×1-t+EVre = 0.5251+0.525×5.8562%×1-0.35+11+0.525×23.61% =...

Words: 257 - Pages: 2

Premium Essay

Boeing

...What Went Wrong At Boeing? My article, The Boeing Debacle: Seven Lessons That Every CEO Must Learn, elicited spirited conversation. Several commentators noted that, in addition to the general lessons, Boeing made specific errors in the way it handled outsourcing and offshoring. Let’s take a closer look at those specifics. Boeing enthusiastically embraced outsourcing, both locally and internationally, as a way of lowering costs and accelerating development. The approach was intended to“reduce the 787′s development time from six to four years and development cost from $10 to $6 billion.” The end result was the opposite. The project is billions of dollars over budget and three years behind schedule. “We spent a lot more money,” Jim Albaugh, Chief of Commercial Airplanes at Boeing, explained in January 2011, “in trying to recover than we ever would have spent if we’d tried to keep the key technologies closer to home.” The right goal: add value for customers Let’s start with what Boeing did right. After losing market share to Airbus (owned by EADS) in the late 1990s, Boeing could have decided to focus on reducing the costs (and the selling prices) of its existing aircraft. That would have led inexorably to corporate death. Instead Boeing decided— commendably—to innovate with a new aircraft that would generate revenues by creating value for customers. First, Boeing aimed to improve their travel experience for the ultimate customers, the passengers. As compared...

Words: 2228 - Pages: 9