...Repairing The Heart With Stem Cells Ron Hansen SCI:115 Prof: Johnson 07/25/14 Repairing the Heart with Stem Cells Let us consider the biggest United States killer of all: heart disease. Almost five million people are affected by congestive heart failure, the loss or dysfunction of heart muscles due to the ineffective pumping of the heart (Bethesda, 2001). Harvard Women's Health Watch published an article titled, Repairing the Heart With Stem Cells, which discusses the issue of heart disease and the possibility of a solution in stem cell replacement (Repairing the Heart with Stem Cells, 2013). This article explains what happens during a heart attack and why people who have had a heart attack may face a lifetime of maintenance to help the heart continue to work efficiently and to prevent further damage to the heart. The article makes use of experimental field studies to illustrate the regenerative capabilities of stem cells, showing that as much as 50% of heart scar tissue improved in seventeen patients. According to the article, not all doctors have the same positive results. The reason for the varying results seems to be due to different approaches in procedures used to acquire the stem cells and then to apply them. Stem cells from bone marrow come from adults. Another approach to the acquisition of stem cells is by extracting stem cells from the patient and then reinserting them where needed. The article goes on to explain that because cell therapy is relatively new there are...
Words: 996 - Pages: 4
...courses of Genetics and Microbiology. However, for Cell Biology we will touch upon those concepts that complement the cellular aspects of transcription. In particular, we will look at the genetic code, called the CODON, frameshift mutations, the structure of theTRANSCRIPTIONAL UNIT, and the phases of transcription. I will point out those aspects of transcription that I feel are important to this course. The study guide will also help you to focus on those parts of transcription that the examination will cover. CHAPTER 19 1. What important event (related to DNA) occurs in G1 before the cell enters the S phase? 2. What important event (related to DNA) occurs in G2 before the cell enters mitosis? 3. Why are G1 and G2 called gap phases? What happens during S phase? 4. Can mitosis occur without cytokinesis? (hint, Drosophila) 5. During which phase of mitosis do sister chromatids separate? 6. How do the experiments of Meselson and Stahl verify the semiconservative model of DNA replication? 7. What is the name of the locus (location) from which DNA replication begins? Does DNA replication occur uni- or bi-directionally? 8. Name the two major components of the primosome. 9. What are the functions of DNA polymerase III, the primosome, primase, DNA polymerase I, and DNA ligase? 10. What structure along the lagging strand allows the replisome to replicate both strands in the same direction? 11. How does cell cycle relate to cell type? 12. What is MPF? What two molecules make...
Words: 810 - Pages: 4
...| | | | | Open-ended Question Response You chose High-Powered Microscope from column A and Collection of insects from column B. You were then asked to respond to three questions: * Why did you choose these items? * How would you use your tool from column A in scientific experiments? Explain your answer. * What would you want to explore about your collection from column B? Explain your answer.This is how you responded: I chose these items because they would go hand in hand when conducting a research project. I would use the microscope to have a better understanding of an insects anatomy. Trying to understand an insects internal organs would be difficult for the unaided eye. I would want to explore how insects blood travels through their bodies. Also I would want to explore the makeup of an insects brain. Again, not having a high-powered microscope would make this very difficult if not impossible.Using the Ctrl + A to select everything, copy and paste the contents of this page into a Microsoft® Word document and submit using the Assignment link. | | | ©2007 University of Phoenix. All rights reserved. Part 2- Scientific Method Equipment List Backpack- Used to carry other equipment needed for experiment Computer/iPhone 6 Plus- Since it’s 2014 and using a laptop in public is a bit archaic. I would use my SWEET new iPhone 6 Plus to collect data such as, photos, video and audio recordings. I could then post them to social media sites like, Twitter, Facebook...
Words: 644 - Pages: 3
...An ISO 9001:2008 Certified Company LAPTOP Level-1 SERVICE TRAINING - COURSE SYLLABUS Day1 INTRODUCTION 1. What is laptop? 2. History of laptop 3. How work laptop? 4. Advantages of laptop instead of desktop 1. CARD LEVEL SERVICE [Hard Ware] 2. CHIP LEVEL SERVICE [Motherboard] 5. Difference between laptop and desktop LAPTOP MANUFACTURING COMPANIES-Acer /Apple /Compaq /Dell -etc. 6. How to buy a laptop? 7. Operating System review &laptop uses & laptop booting process 8. Guide to purchase of second hand laptop Day2 TOOLS AND TESTING EQUIPMENTS 1. LAPTOP HARDWARE TOOLS Screw Driver Kit Laptop Casing Opener Nose Pliers Cutter Electric Screw Driver Tweezer Anti Static Wrist Band PCB Cleaning Brush & etc 2. LAPTOP CHIP LEVEL TOOLS Micro Soldering Iron Tip Soldering Iron Hot Air Blower Magnifying Lenz with Lamp Liquid Flux Dry Flux & etc 3. TESTING EQUIPMENT 1.Anolog Mutimeter Digittal Mutimeter Battery Booster Universal AC adapter Debug card SATA to USB convertor IDE to USB convertor 4. OTHER HARDWARE SPARES External Monitor External DVD Drive Usb Keyboard / Mouse&etc Day3 Day4 Day5 Day6 Day7 Day8 5. ACCESSORIES Laptop bag LCD Screen Card LCD Cleaner & etc 6. ADVANCED TOOLS BGA Rework Machine Reballing Kits Infrared IC Heater PCB Scanner Oscilloscope [CRO] SMD IC Extractor PTH Desoldering Machine RCL Meter SMT ELECTRONICS INTRODUCTION RESISTOR CAPACITOR INDUCTOR & TRANSFOEMER LAPTOP PARTS VIEW & KEYBOARD & TOUCH...
Words: 2886 - Pages: 12
...Chapter 3 This chapter helps you power up your system and install drivers and utilities that came with the support CD. VERA 2 Starting up 3.1 Installing an operating system This motherboard supports Windows® 2000/XP and VISTA Premium operating system (OS). Always install the latest OS version and Because motherboard settings and hardware options vary, use the setup procedures presented in this chapter for general reference only. Refer to your OS documentation for more information. 3.2 Support CD information The support CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features. The contents of the support CD are subject to change at any time without notice. Visit the ASUS website for updates. 3.2.1 Running the support CD To begin using the support CD, simply insert the CD into your CD-ROM drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer. Click on an item to install. If Autorun is NOT enabled in your computer, browse the contents of the click the ASSETUP.EXE to run the CD. 3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. 3-2 Chapter 3: Starting up Intel Chipset Inf Update Program This item installs the Intel® Chipset INF Update Program. This driver enables Plug-n-Play INF support for the Intel®...
Words: 5285 - Pages: 22
...Motherboard 使用手冊 M2A-VM T3088 1.00 版 2007 年 4 月發行 版權所有•不得翻印 © 2007 華碩電腦 本產品的所有部分,包括配件與軟體等,其所有權都歸華碩電腦公司(以 下簡稱華碩)所有,未經華碩公司許可,不得任意地仿製、拷貝、謄抄或轉 譯。本使用手冊沒有任何型式的擔保、立場表達或其它暗示。若有任何因本 使用手冊或其所提到之產品的所有資訊,所引起直接或間接的資料流失、利 益損失或事業終止,華碩及其所屬員工恕不為其擔負任何責任。除此之外, 本使用手冊所提到的產品規格及資訊僅供參考,內容亦會隨時更新,恕不另 行通知。本使用手冊的所有部分,包括硬體及軟體,若有任何錯誤,華碩沒 有義務為其擔負任何責任。 使用手冊中所談論到的產品名稱僅做識別之用,而這些名稱可能是屬於其 他公司的註冊商標或是版權。 本產品的名稱與版本都會印在主機板/顯示卡上,版本數字的編碼方式是 用三個數字組成,並有一個小數點做間隔,如 1.22、1.24 等...數字愈大表示 版本愈新,而愈左邊位數的數字更動表示更動幅度也愈大。主機板/顯示卡、 BIOS 或驅動程式改變,使用手冊都會隨之更新。更新的詳細說明請您到華碩 的全球資訊網瀏覽或是直接與華碩公司聯絡。 目錄內容 安全性須知 .......................................................................................................................6 電氣方面的安全性 ..............................................................................................6 操作方面的安全性 ..............................................................................................6 關於這本使用手冊 .........................................................................................................7 使用手冊的編排方式 .........................................................................................7 提示符號 ..............................................................................................................7 跳線帽及圖示說明 ..............................................................................................8 哪裡可以找到更多的產品資訊 ......................................................................8 代理商查詢.......................................................................
Words: 7511 - Pages: 31
...E5755 Eee PC User Manual Windows® 7 Edition Eee PC 1001P/1005P/R101/ R105 Series 15G06Q256000 Table of Contents Table of Contents....................................................................................................................... ii About This User’s Manual.......................................................................................................iv Notes for This Manual..............................................................................................................iv Safety Precautions.....................................................................................................................v Transportation Precautions....................................................................................vi Charging Your Batteries..........................................................................................vii Airplane Precautions................................................................................................vii Chapter 1: Knowing the Parts Top Side.....................................................................................................................................1-2 Bottom Side..............................................................................................................................1-5 Front Side..................................................................................................................................1-6 Right...
Words: 7992 - Pages: 32
...Dell™ PowerEdge™ SC1435 Systems Hardware Owner’s Manual w w w. d e l l . c o m | s u p p o r t . d e l l . c o m Downloaded from www.Manualslib.com manuals search engine Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2006 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerConnect, PowerEdge, PowerVault, PowerApp, Dell OpenManage, and Dell XPS are trademarks of Dell Inc.; Microsoft, Windows, MS-DOS, and Windows Server are registered trademarks of Microsoft Corporation; AMD and AMD PowerNow! are trademarks of Advanced Micro Devices, Inc.; EMC is a registered trademark of EMC Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Model SVUA August 2006 P/N HJ362 Rev. A00 Downloaded from www.Manualslib...
Words: 32860 - Pages: 132
...IT320 Unit 5 HW 1. When a router is first powered on, it completes a four-step initialization process: 1. Preforming a power-on self test (POST) 2. Loading a bootstrap program 3. Loading an IOS 4. Loading a configuration file The last three of these steps require the router to copy the files into RAM. Normally, most routers load an IOS image that is stored in flash memory and an initial configuration stored in NVRAM. 2. Routers use the following logic, in order, to attempt to load an IOS: 1. Load a limited-function IOS if the configuration register’s last hex digit is set to 0 or 1. 2. Load an IOS based on the configuration of boot system commands in the startup-configuration file. 3. Load the first file in flash as the IOS. 4. Use TFTP broadcasts to find a TFTP server and download an IOS from that server. 5. Load a limited-function IOS from ROM. In Step 1, the configuration register is a16-bit number that Cisco routers store in a hidden area of NVRAM. It can be set in a couple of ways and can be seen using the show version command. The most commonly used way to set its value is to use the config-register global configuration command. Routers use the 4 low-order bits of the configuration register as the boot field, which tells the router what to do in the first of the preceding five decision steps. If the value of the field is set to 0, the router loads the ROMMON (ROM Monitor), which is used for password recovery. If the value is set to1, the router loads...
Words: 448 - Pages: 2
...Knowledge Assessment Matching 1. Remote Desktop E. Based on the former Terminal Services 2. System image backup J. Saves data to a VHD file 3. BranchCache A. Conserves WAN bandwidth 4. Distributed cache mode B. Files cached on each client 5. Volume shadow copies H. Previous versions 6. Incremental backup D. Files changed since the last backup job 7. Windows RE I. Accessible from a Window 7 installation disk 8. Hosted cache mode C. Files cached on a central server 9. Windows Remote Management G. Executes PowerShell commands on remote computers 10. System restore point F. Configuration settings and registry information Multiple Choice 1. Which of the following service priority guidelines are not accurate? D. Departmental issues should be rated according to the function of the department. A problem with a computer belonging to a department that is critical to the organization, such as order entry or a customer service call center, should take precedence over a problem with a computer belonging to a department that can better tolerate a period of down time, such as research and development. 2. Place these troubleshooting steps in the correct order, using the procedure described in this lesson as your guide. B, D, C, A. B: Establishing the symptoms is the first step in troubleshooting any problem to determine exactly what is going wrong. D: Select the most probable cause. Once...
Words: 746 - Pages: 3
...BitLocker Drive Encryption Overview 73 out of 98 rated this helpful - Rate this topic Applies To: Windows Server 2008, Windows Server 2008 R2, Windows Vista BitLocker Drive Encryption is a data protection feature available Windows Server 2008 R2 and in some editions of Windows 7. Having BitLocker integrated with the operating system addresses the threats of data theft or exposure from lost, stolen, or inappropriately decommissioned computers. Data on a lost or stolen computer is vulnerable to unauthorized access, either by running a software-attack tool against it or by transferring the computer's hard disk to a different computer. BitLocker helps mitigate unauthorized data access by enhancing file and system protections. BitLocker also helps render data inaccessible when BitLocker-protected computers are decommissioned or recycled. BitLocker provides the most protection when used with a Trusted Platform Module (TPM) version 1.2. The TPM is a hardware component installed in many newer computers by the computer manufacturers. It works with BitLocker to help protect user data and to ensure that a computer has not been tampered with while the system was offline. On computers that do not have a TPM version 1.2, you can still use BitLocker to encrypt the Windows operating system drive. However, this implementation will require the user to insert a USB startup key to start the computer or resume from hibernation, and it does not provide the pre-startup system integrity verification...
Words: 1463 - Pages: 6
...Introduction To sum of the differences between ROM RAM BIOS and Post I will simply define the basis of each component while defining what they do. ROM is short for (Read-only Memory) Memory which data is prerecorded on a computer. ROM is simply data that cannot be eliminated even when the computer is off. When working in ROM it is difficult or nearly impossible to change. BIOS is short for the acronym (Basic Input Output System) it is a program which stores detailed information and enable the computer to boot. In addition a ROM chip located on the motherboard, it lets you access the basic setup and ensures that the BIOS will readily be available and will not de damaged by disk failures. RAM is (Random Access Memory) Memory that can be access randomly memory that can be access without touching preceding bytes. RAM is the typical memory found in most computers or printers. In addition, RAM is a volatile memory that requires power to keep information accessible. If power is lost, then memory can be lost. Lastly Post is the self-test which is activated by Bios. The post is designed to run checks on the motherboard. It necessary to use ROM for the BIOS because the ROM retains information on the computer even while shut down whereas RAM does not. Whenever a computer is being use the information is being stored on the RAM if the is ever a power shortage or the computer lose power the information is lost. RAM does not store memory when there is no power. POST beep codes make...
Words: 356 - Pages: 2
...Motherboard Answer the following questions 5 April 2015 Tanweer Haroon DeJong May The major components of the motherboard are as follows: memory and their slots which is the computer’s memory (RAM) and is one of the most important parts of the system board. The number of chips depends on the type of computer and its capacity. Expansion cards are a typical component of non-integrated system boards a graphic card is a perfect example, but this can be integrated into the motherboard. CPU and slots is the central processing unit and it’s a highly prolific part of the computer and is located on the right of a motherboard and can be identified as a result of the heat sink or cooling fan directly on it. BIOS chip directs the CPU with respect to how it relates with other parts of the computer. Its basic input and output system chip or integrated circuit is fixed on the board and is easily identifiable. CMOS battery, the complementary metal oxide semiconductor is a small battery on the system board that powers the CMOS memory. Power supply and connectors is the electrical unit of the system and if it’s bad the system will not work. Keyboard connector are located on the motherboard and there are two main types. The AT has a round connecting interface into the motherboard and the PS/2 connector is rectangular in shape and smaller. Modern motherboards come with both. Mouse connector its connecting port is located on the motherboard and its interface is usually round. Floppy...
Words: 431 - Pages: 2
...Fall BIOS – Instructor: Mrs. Nicholas – NT1110 – 1 May 2014 Lavon Hawkins BIOS SUMMARY Lavon Hawkins BIOS SUMMARY BIOS BIOS: The BIOS is software which is stored on the motherboard. It tells the computer how to perform a number of basic functions such as booting and keyboard control. It is also used to identify and configure the hardware in a computer such as hard drive, floppy drive, optical drive, CPU, memory and so on. CMOS: The complementary metal oxide semiconductor is the type of semiconductor chip on the motherboard which stores the system information and computer settings such as date, time, hard drive settings, boot sequence, parallel part settings, on-base audio and video etc. Firmware: Firmware is a combination of software and hardware. Computer chips that have data or programs recorded on them are firmware. POST: The POST or power on self-test is a test the computer does when it first boots up. It’s to verify all the hardware is working. If all checks out it usually gives a single beep. If not a beep code could come up. Beep Code: A beep code is an audible code which is generated during the POST (Power On Self Test) when the BIOS has an issue but has not made it all the way up the boot sequence that it can give you the error as a message on the monitor BIOS update: Updating the BIOS can fix or enhance aspects of a computers performance. Or it may provide support for newly installed hardware. 1 Flash BIOS update: A BIOS chip...
Words: 353 - Pages: 2
...products that are new and cheaper than the ones that came before. This way a company is able to take a product that is already out on the market and take it apart piece by piece and see how it works so they can rebuild it cheaper and more efficiently. One famous example of reverse engineering is in the mid-1980s Phoenix Technologies Ltd wanted to produce a BIOS for PCs that would be compatible with the IBM PCs proprietary BIOS. To protect themselves from any charges of illegally copying their BIOS they used what is called a clean room. With the clean room approach there are two teams; one that studies the BIOS that they are trying to recreate and they come up with a detailed report of what it is exactly the BIOS does without using any of the code or anything that will link their description to that particular BIOS. Then this description is given to another team that has not looked at the code of the BIOS they are recreating and they build whole new BIOS off those instructions. This way even if some of the code is the same it will not be a copy right infringement since the second team who actually wrote the code and built the BIOS...
Words: 792 - Pages: 4