Free Essay

Chapter Review Itt

In:

Submitted By melo21
Words 815
Pages 4
Robert Black
Computer structure
NT1110
Melendez

Serial Ports VS Parallel Ports

Computers are the society it can be known as one of the greatest creations in technology. It has changed the way we will look at technology for the rest of eternity. Computers have evolved over the last few decades. Computers make life for an individual a lot less complicated. You might be attached to your computer but there are many other utilities that help operate your computer device.
Serial ports are normally identified on IBM compatible computers as COM better known as (communications) ports. For example, a mouse might be connected to COM1 and a modem to COM2 since they have multiple directions. Serial ports where developed in the early 1970s in the first computer device. They can be connected to external modems, Serial mouse or pointing devices such as trackballs or touchpads, Plotters, Label printers, Serial printers PDA docking stations, Digital cameras, PC- to- PC cofile transfer programs such as Direct Cable Connection, Lap Link, Serial ports come in two well-known forms: DB- 9M (male), DB- 25M (male) Either form can be adapted to the other connector type with a low- cost adapter. The difference is possible because serial communications need only a few wires. Meanwhile parallel printers, which use a standard cable, each type of serial device uses a specially wired cable. A serial connection needs to have a cable that connects the device to the port.
Devices other than printers that plug into the parallel known an (LPT) port have two connectors. One is used for the cable that runs from the device to the parallel port, and another can be used for the cable that runs from the device to the printer. The parallel (LPT) port is unique because it uses two completely different connect-tor types: The parallel (LPT) port is different because it uses two completely different connect-tor types: Parallel ports can be constructed as LPT1, LPT2, and LPT3. When a one-single parallel port is found in the system, regardless of its configuration, it is always labeled as LPT1. The configurations for LPT2 and LPT3 are use when used with more than one parallel port.
The parallel port is one of the oldest port designs with the first use in the early 1970s, which allows printers to be hooked directly into a mainframe and print multiple orders carried out by entering a section of code through the command station. The parallel port can also allow for a one-way transmission of data from a source to a secondary device, such as a printer. In most parallel ports they generally have a minimum of 25 pin connectors that create the actual connecting part of the device.
One key difference that is a key factor between a serial and parallel port is that the serial port allows for data to be transferred to the hard drive from a remote device, or transmitted from the hard drive to a remote device. A serial port can also be referred to as a communication port or bi-directional port. This two-way communication process makes it possible to connect many things such as work stations to much larger terminals as well. One major issue noted with parallel ports is that they suffer extremely from minor distractions known as inter-symbol interference (ISI) and noise, and as a result the data can be corrupted over long distances. Which should also be noted is that since the wires in a parallel system have minor amounts of capacitance and mutual inductance, the bandwidth of parallel wires is much lower than the bandwidth of serial wires. It is known that less noise in the channel can mean you can successfully transmit data reliably with a lower Signal-to-Noise Ratio, SNR. Parallel ports can also have one result into an increased potential for noise and interference, parallel wires need to be far shorter than serial wires. The main issues with serial ports are bandwidth and limited ports. The port which is the oldest port can also be known as the slowest out of the port family. Serial port is the slowest of the whole entire group. For an example consider if you would have a host adapter that claims to support 400 kbps, consider the fact that the serial port can only support 115 kbps. The Parallel port can produce quick enough speed for most applications, but it suffers from many difficult issues as well. The most specific issue is that the port known is unusual. This is information that is real significant for an consumer of an operating computer should have proper knowledge of .

References

References
Simonds, L. (1998). Getting more from your USB port. Family, 5(7), 36.

References
Bai, Y. (2005). The Windows Serial Port Programming Handbook. Boca Raton, Fla: Auerbach Publications References
SERIAL PORT CONNECTION CIRCUIT AND SERVER. (2013).

.

Similar Documents

Premium Essay

Drew

...Syllabus NT2799 Network Systems Administration Capstone Project SYLLABUS Credit hours: 4.5 Contact hours: 56 (34 Theory, 22 Lab) Prerequisite(s): Completion of a minimum of 72 credits earned in the program of study including NT2640 IP Networking or equivalent. © ITT Educational Services, Inc. All Rights Reserved. -1- 13/01/2013 Network Systems Administration Capstone Project SYLLABUS COURSE SUMMARY COURSE DESCRIPTION This course provides an opportunity for students to work on a comprehensive project that includes the design, planning and implementation of a network solution for solving specific business problems. Common project management processes are applied to identify deliverables and outcomes of the project. MAJOR INSTRUCTIONAL AREAS 1. Project Management Techniques 2. A Fundamental Review of the Basics of Electronics in the AASNSA Program 3. Capstone Project 4. Research of Current and Emerging Technology COURSE OBJECTIVES 1. Apply important concepts of project management to the actual capstone project proposed for this course. 2. Use Microsoft Office Project to help plan and manage the actual capstone project. 3. Analyze the requirements for the capstone project. 4. Integrate and apply the knowledge acquired in the program to provide effective technological solutions for given problems. 5. Work in teams on a large-scope project. 6. Document solutions to a problem in detail...

Words: 7871 - Pages: 32

Premium Essay

Module 3 Essay

...Syllabus NT1210 Introduction to Networking SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory, 22 Lab) Prerequisite: NT1110 Computer Structure and Logic or equivalent © ITT Educational Services, Inc. All Rights Reserved. -1- 05/08/2013 Introduction to Networking SYLLABUS COURSE SUMMARY COURSE DESCRIPTION This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments. MAJOR INSTRUCTIONAL AREAS 1. Networking fundamentals 2. The OSI model and its use in networking 3. LANs, WANs, MANs and their implementation 4. Physical layer fundamentals 5. Basics of the data link layer 6. The functions of TCP/IP 7. IP addressing, subnetting, and supernetting 8. Diagramming the physical components that comprise a network 9. Logic created by the interconnectivity of network components 10. Applying network security 11. Future developments in networking COURSE OBJECTIVES 1. Explain key networking concepts and terminology. 2. Identify the advances...

Words: 4795 - Pages: 20

Free Essay

Network

...pages 21-24 Concept Questions on pages 25-27 VLSM Case Study on page 27 Internet Research on page 29 (Use the ITT Tech Virtual Library.) • Complete Chapter 9 Review Questions 2-7, 10, 14, 20-22 on pages 258-259 of Introduction to Telecommunications. Submit your written answers to your instructor at the beginning of Unit 2. . Assignment 1.2: Virtual Labs • Complete Virtual Labs 6, 7, and 8 from the CCNA 640-802 CCNA Simulator, which you can find by clicking through these paths: ICND1 Troubleshooting Scenarios Lab 6: IP Addressing and Routing. ICND1 Troubleshooting Scenarios ICND1 Part 4: Troubleshooting Labs Lab 7: IP Routing I ICND 2 Troubleshooting Scenarios Lab 13: IP Routing II Submit your written answers to your instructor at the beginning of Unit 2. ©ITT Educational Services, Inc: Date: 03/13/09 Network Technology and Service Integration Unit 2 Homework The following homework is designed to cover the course objectives for this unit. Assignment 2.1: Textbook/Workbook Assignments • Complete the following exercises and questions from Routers and Routing Basics: CCNA 3 Labs and Study Guide: Vocabulary Exercise: Matching on page 70 Vocabulary Exercise: Completion on page 71 Concept Questions on page 72 Build the SPF Loop-Free Topology on pages 73-76 Learn the OSPF Commands Exercise on page 77-83 DR/BDR Election Exercise on pages 84-85 • Complete Chapter 10 Review Questions 2-16 (even questions only) on...

Words: 2825 - Pages: 12

Premium Essay

Nt2147

...Physical Networking: Syllabus NT1310 NT1310 Physical Networking SYLLABUS Credit hours: 4.5 Contact /Instructional hours: 56 (34 Theory, 22 Lab) Prerequisite(s):NT1210 Introduction to Networking or equivalent © ITT Educational Services, Inc. All Rights Reserved. -1- 03/02/2012 NT1310 Physical Networking SYLLABUS COURSE SUMMARY COURSE DESCRIPTION This course examines industry standards and practices involving the physical components of networking technologies (such as wiring standards and practices, various media and interconnection components), networking devices and their specifications and functions. Students will practice designing physical network solutions based on appropriate capacity planning and implementing various installations, testing and troubleshooting techniques for a computer network. MAJOR INSTRUCTIONAL AREAS 1. 2. 3. 4. 5. 6. 7. 8. 9. Telecommunications Cabling Specifications and Constraints Cabling Tools and Media Network Equipment for Wired and Wireless Networks Cable Testing Fiber Optics and Light Principles Fiber-Optic Cables, Splicing and Connectors Fiber-Optic Light Sources, Detectors and Receivers Fiber-Optic Considerations and Testing COURSE OBJECTIVES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Distinguish between bandwidth, frequency, and data rate in a data network Explain the importance of codes, standards, and specifications. Compare and contrast network topologies ...

Words: 1770 - Pages: 8

Free Essay

Stuff

...Linux Operating System | Jerry Black | Spring 2012 | | | | Course Description: Installation, configuration and management of a Linux operating system will be explored. Focus will be on functions that resemble the UNIX environment. Directory and file management, user account management and certain device management (such as drives, printers, interface cards, etc.) will be discussed. Prerequisite(s) and/or Corequisite(s): Prerequisite: IT103 Operating Systems Credit hours: 4 Contact hours: 50 (30 Theory Hours, 20 Lab Hours) Syllabus: Linux Operating System Instructor | Jerry Black | Office Hours | Thursday, 4PM-6PM | Class Hours | Monday, 6:00PM – 10:20PM | Contact | Ms. Travis, 937-264-7707 | | jblack@itt-tech.edu | Major Instructional Areas 1. Introduction to Linux 2. Linux installation 3. Graphical user interface (GUI) desktops 4. Command-line interface (CLI) essentials 5. Hardware configuration: display, network, and printer 6. Networking: Resource sharing and remote access 7. Backup and restore utilities 8. Installing software in Linux 9. Scripting: Bourne Again Shell (bash) and Perl 10. Apache Web Server installation and configuration Course Objectives 1. Discuss the history and unique characteristics of the Linux operating system. 2. Perform an installation of Linux. 3. Use the components and features of the GNOME desktop environment. 4. Perform basic tasks by using the command-line...

Words: 2032 - Pages: 9

Premium Essay

Itt Syllabus

...Syllabus COURSE SUMMARY COURSE DESCRIPTION This course reviews characteristic and trends of the global information society including basic information processing, Internet research, other skills used by the technical professionals and techniques that can be used for independent technical learning. MAJOR INSTRUCTIONAL AREAS 1. Getting Started at ITT Technical Institute 2. Productivity Software 3. Overview of Technology Tools 4. Microsoft Word 5. Microsoft PowerPoint 6. Microsoft Excel 7. Microsoft Access 8. Communication Tools 9. Exploring Career Goals 21st-century skills o Changes in work and the workplace o Building marketable proficiencies o Projecting professionalism ITT Technical Institute Career Services Resources o Targeting job descriptions  o Transferable skills Crafting a Resume 10. Skills and Techniques of a Successful Student Strategies for independent learning Learning styles Note-taking strategies Test-taking techniques © ITT Educational Services, Inc. All Rights Reserved. [2] 10/29/2013 GS1145 Strategies for the Technical Professional Syllabus Critical thinking Problem solving Basic research skills o ITT Tech Virtual Library o Web searches o Citing sources Time management Working in teams COURSE LEARNING OBJECTIVES By the end of this course, you should be able to: 1. Gather relevant information using ITT Technical Institute resources, such as student email, ITT Tech Virtual Library, and ITT Tech Student Portal. 2. Perform self-analysis on the...

Words: 14113 - Pages: 57

Free Essay

Nt2640

...NT1430 Linux Networking STUDENT COPY: Assignment 1 for All Units Assignment 1 for All Units: Chapter Exercises (NT1430.GA1) Learning Objectives and Outcomes Each unit exercise covers the Learning Objectives and Outcomes for that unit. You can review those objectives and outcomes in your syllabus. Assignment Requirements Type out answers for the end-of-chapter exercise questions indicated in the list below for each unit. You will be graded on accuracy and completeness. Required Resources Sobell, M. G. (2012). A practical guide to Fedora and Red Hat Enterprise Linux. (6 ed.). Upper Saddle River, NJ: Prentice Hall. th Submission Requirements Submit your word-processed answers to your instructor at the beginning of the next class after the assignment. Units 1-10 Chapter Exercises Unit 1 § § § § Unit 2 § § Unit 3 § § § Unit 4 § § Sobell, Chapter 14, p. 582, Exercises 1-5 Sobell, Chapter 10, p. 403, Exercise 1 Sobell, Chapter 7, pp. 251, Exercises 1, 3, 4, 8 Sobell, Chapter 9, pp. 356, Exercises 1, 2, 3, 4, 5, 6, 8 Sobell, Chapter 9, pp. 357, Advanced Exercises 10, 11 Sobell, Chapter 5, p. 182, Exercises 1, 3, 4, 8, 10 Sobell, Chapter 6, p. 221, Exercises 1, 2, 3, 4, 6 Chapter 1, pp. 20-21, Exercises 1, 4 Chapter 2, p. 53, Exercise 1 Chapter 3, p. 86, Exercises 1, 4, 8 Chapter 11, p. 498, Exercises 1, 3, 7 © ITT Educational Services, Inc. All Rights Reserved. -118- Change Date: 05/30/2012 NT1430 Linux Networking STUDENT COPY: Assignment 1 for All...

Words: 403 - Pages: 2

Premium Essay

Seeking Help

...Systems Security 400 Level Capstone Project IS418 IS404 Access Control, Authentication & KPI IS421 Legal & Security Issues IS423 Securing Windows Platforms & Applications IS411 Security Policies & Implementation Issues IS415 System Forensics Investigation & Response IS416 Securing Windows Platforms & Applications Securing Linux Platforms & Applications 300 Level IS305 Managing Risk in Information Systems IS308 Security Strategies for Web Applications & Social Networking IS316 Fundamentals of Network Security Firewalls & VPNs IS317 Hacker Techniques Tools & Incident Handling EC311 Introduction to Project Management IT250 Linux operating System ment CNS Program Prerequisites: ©ITT Educational Services, Inc. Date: 10/25/2010 Introduction to Information...

Words: 4296 - Pages: 18

Free Essay

Hswtfitbs

...methods and standards have changed over time. * Evaluate examples of written, oral, and visual communications to determine if they conform to ethical and professional standards. Assignment Requirements Read pp. 11-18 in the textbook. Draw each of the models from the book including the fourth model that the textbook authors added. Under each model, define and evaluate your understanding of the communication channels and processes at work with each model in three to five sentences. Describe how each model builds on the previous model with at least one sentence. Write down and evaluate the definition of communication provided from the textbook authors with three or more sentences. Required Resources Human Communication in Society, Chapter 1, pp. 11-18 Submission Requirements This assignment is a graded, in-class assignment. You have 60 minutes to complete the assignment. At the end of the 60 minutes, turn in your assignment to your instructor for grading. Self-Assessment Checklist * Do you have your name at the top of the assignment? * Did you draw the four models of communication? * Did you provide all the requested information? * Did you proofread your report, looking for capitalization, punctuation, and word usage errors? * Is your writing legible? Unit 1 Assignment...

Words: 5707 - Pages: 23

Premium Essay

Nt1210 Introduction to Networking Onsite Course

...ITT Technical Institute NT1210 Introduction to Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments Introduction to Networking Syllabus Where Does This Course Belong? This course is required for the associate program in Network System Administration and the associate program in Electrical Engineering Technology. The following diagrams demonstrate how this course fits in each program. Associate Program in Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110...

Words: 4400 - Pages: 18

Premium Essay

Nt 1210

...ITT Technical Institute NT1210 Introduction to Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments Introduction to Networking Syllabus Where Does This Course Belong? This course is required for the associate program in Network System Administration and the associate program in Electrical Engineering Technology. The following diagrams demonstrate how this course fits in each program. Associate Program in Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110...

Words: 4400 - Pages: 18

Premium Essay

Trying to Join Site

...Computer History and Fundamentals 2. Hardware 3. Operating Systems 4. Basic Networking 5. Basic Security 6. Software 7. Basic Programming 8. Web Technologies 9. Troubleshooting COURSE LEARNING OBJECTIVES By the end of this course, you should be able to: 1. Identify the evolution of computers and different types of computers. 2. Convert numbers between binary, decimal, and hexadecimal number systems. 3. Explain the purpose, functions, and characteristics of a CPU. 4. Describe the physical components of a computer and various input and output devices, including storage and memory. 5. Describe the function of BIOS and the booting process of a computer. 6. Describe basic operating system architecture, its components, and storage management. © ITT Educational Services, Inc. All Rights Reserved. [2] 6/15/15 IT1115 Introduction to Information Technology Syllabus 7. Describe basic types of computer network topologies and connections, protocols, and services used on the Internet. 8. Describe virtual computing and virtual networking concepts. 9. Describe fundamental cloud computing architectures and services. 10. Apply basic computer security measures by using authentication and access control. 11. Explain the basics of program algorithms and scripts used for software application development. 12. Apply basic...

Words: 12527 - Pages: 51

Premium Essay

Its Making Put Something Here

...PT1420 Introduction to Programming Week-2 Lesson Plan TUE 6:00 PM to 10:30 PM Instructor: Tushar Patel (tspatel02@yahoo.com, tpatel@itt-tech.edu) CLASS: Topic: Unit 2: Software Program Design I Course Objectives Covered by This Unit CO2: Design programs by using flowcharts and pseudo code. CO3: Write programs that perform input, processing, and output. Unit Learning Outcomes LO8: Determine program input, processing, and output stages. LO9: Create the necessary flowcharts to describe a program’s structure. LO10: Use pseudocode to define a program’s structure. LO11: Formulate solution algorithms for calculations by properly following the order of operations. Key Concepts ▪ Determining input, process, and output ▪ Creating flowcharts and pseudocode ▪ Formulating algorithms Reading ▪ Gaddis, Chapter 2: “Introduction to Computers and Programming,” pages 29-55 Resources: • Data Projector • ITT Virtual Library • Text Books • Visual Studio • Lab Computers • Student Removable Hard Drive • VM Ware Player Methods: • Lecture • Group Discussion • Lab Work • Review exercise / Research Papers • Quiz Brief Lesson Overview: Today’s lecture we would be discussing the following topics. • Discuss how all programs basically consist of a three-step process: input, process, and output. Use the payroll calculation program...

Words: 895 - Pages: 4

Free Essay

Nt 1210

...Objectives and Assignments Week 7 Instructor: Thomas W. Chappell, PhD. Office Hours (For appointments): Monday, Tuesday, Wednesday, Thursday 3:30 – 6:00 PM Objectives: Complete current week’s assignments submissions Important Notes: Attendance in class is critical to your accomplishments Missing class is missing valuable information that will help you succeed and accomplish your goals Please attend every class for success in your field! Grading Policy: * Please read the last page of your syllabus which will be covered in week one. * Missing labs will be made up at 80% after the first week, 70% the after the second week and 0% the third week. * Quizzes will not be made up. * Students can potentially be dropped by the Dean of Academic Affairs after missing 4 or 5 cumulative classes. * Students who miss three consecutive class will be dropped by the Dean of Academic Affairs * Assignments and Labs will be counted at 0% after three weeks. Course Objectives Covered by This Unit * CO1 Identify the major needs and stakeholders for computer networks and network applications * CO2 Identify the classifications of networks and how they are applied to various types of enterprises * CO3 Compare and contrast the OSI and TCP/IP models and their applications to actual networks * CO4 Explain the functionality and use of typical network protocols * CO5 Analyze...

Words: 799 - Pages: 4

Premium Essay

It255

...ITT Technical Institute IT255 Introduction to Information Systems Security Onsite Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: IT220 Network Standards and Protocols, IT221 Microsoft Network Operating System I, IT250 Linux Operating System Course Description: This course provides an overview of security challenges and strategies of counter measures in the information systems environment. Topics include definition of terms, concepts, elements, and goals incorporating industry standards and practices with a focus on availability, vulnerability, integrity and confidentiality aspects of information systems. Introduction to Information Systems Security Syllabus Where Does This Course Belong? This course is required for the Bachelor of Science in Information Systems Security program. This program covers the following core areas:    Foundational Courses Technical Courses BSISS Project The following diagram demonstrates how this course fits in the program: IS427 Information Systems Security Capstone Project 400 Level IS404 Access Control, Authentication & KPI IS411 Security Policies & Implementation Issues IS415 System Forensics Investigation & Response IS416 Securing Windows Platforms & Applications IS418 Securing Linux Platforms & Applications IS421 Legal & Security Issues IS423 Securing Windows Platforms & Applications ...

Words: 4114 - Pages: 17