...Claudine Estes 7144 Olive St Kansas City, MO 64132 (913) 265-0362 estesclaudine35@gmail.com Professional Experience 10/2010 – Present Office Administrator Devon’s Cleaning Service KC 2723 E 114th St #1309, Kansas City, MO * Maintain a presentable, welcoming office environment including the lobby, conference rooms * Ensure that all client and vendor meetings are handled professionally, including set up and clean up * Proficient with the office technology in order to assist staff in meetings, and conference calls * Answer telephone, direct, screen calls, taking and relaying messages * Provide information to callers, greet clients and escort individuals to correct destination * Provide general clerical and administrative support to all levels of professionals * Schedule appointments, organize meetings, maintain appointment diary either electronically or manually * Prepare letters and documents, receiving and sorting out e-mail and deliveries * Ensure that common areas in office premises are equipped with required office supplies as appropriate * Monitor the use of equipment and supplies within the office. 6/2014 – 7/2015 Mail Insert Machine Operator Pitney Bowes 6301 Equitable Rd, Kansas City, MO 64120 Job duties * Ensured that the mail is reviewed for proper date, postage, and good quality barcodes prior to being placed in the appropriate mail trays by verifying the zip codes on the mail match the mail trays properly * Checked for presort...
Words: 464 - Pages: 2
...ITT Technical Institute NT1230 Client-Server Networking I Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisite or Corerequisite: NT1210 Introduction to Networking or equivalent Course Description: This course introduces operating principles for the client-server based networking systems. Students will examine processes and procedures involving the installation, configuration, maintanence, troublshooting and routine adminstrative tasks of popular desktop operating system(s) for standalone and network client computers, and related aspects of typical network server functions. Client-Server Networking I Syllabus Where Does This Course Belong? 1st QTR GS1140 NT1110 GS1145 Problem Solving Theory Computer Structure and Logic Strategies for the Technical Professional 2nd QTR NT1210 Introduction to Networking NT1230 Client-Server Networking I MA1210 College Mathematics I 3rd QTR NT1310 NT1330 MA1310 4th QTR PT1420 NT1430 EN1320 5th QTR PT2520 NT2580 EN1420 6th QTR NT2640 NT2670 CO2520 7th QTR NT2799 SP2750 Physical Networking Client-Server Networking II College Mathematics II Introduction to Programming Linux Networking Composition I Database Concepts Introduction to Information Security Composition II IP Networking Email and Web Services Communications Network Systems Administration Capstone Project Group Theory The follow diagram indicates how this course...
Words: 1834 - Pages: 8
...improvement. The following 15 evaluations will be used to access the current state of the network: 1. Evaluation of Client Computer Hardware In the evaluation of client computer hardware, this evaluation seeks to identify all client computer assets owned by the company. All laptops and desktops owned by the company should be made available as needed in order for the evaluation to be as accurate as possible. It will be necessary to perform a review of all client computers that connect to the company assets. These machines will be analyzed for speed, performance, and reliability. I will look for variations in hardware manufacturers. Depending on the circumstance, it can result in better TCO (Total Cost of Ownership) if client computers are limited to one or two manufacturers. In addition, machines that are broken, out of warranty, or outdated will be recommended for repair or replacement. 1. 2. Evaluation of Client Computer Software In the evaluation of client computer software, I will seek to identify all software that is installed on client computers and being used in the workplace. This evaluation can be performed using software metering in software such as Microsoft System Center Configuration Manager, if installed. If not installed, this information will be collected manually by viewing the installed software on each machine. All client computer software will be evaluated to ensure that it is up to date and that it meets or exceeds industry standards. For...
Words: 2399 - Pages: 10
...The University Student Registration System: a Case Study in Building a High-Availability Distributed Application Using General Purpose Components M. C. Little, S. M. Wheater, D. B. Ingham, C. R. Snow, H. Whitfield and S. K. Shrivastava Department of Computing Science, Newcastle University, Newcastle upon Tyne, NE1 7RU, England. Abstract Prior to 1994, student registration at Newcastle University involved students being registered in a single place, where they would present a form which had previously been filled in by the student and their department. After registration this information was then transferred to a computerised format. The University decided that the entire registration process was to be computerised for the Autumn of 1994, with the admission and registration being carried out at the departments of the students. Such a system has a very high availability requirement: admissions tutors and secretaries must be able to access and create student records (particularly at the start of a new academic year when new students arrive). The Arjuna distributed system has been under development in the Department of Computing Science for many years. Arjuna’s design aims are to provide tools to assist in the construction of fault-tolerant, highly available distributed applications using atomic actions (atomic transactions) and replication. Arjuna offers the right set of facilities for this application, and its deployment would enable the University to exploit the existing...
Words: 8052 - Pages: 33
...you will: o o o o o o Learn about client/server architecture Study server-side scripting Create ASP .NET applications Learn about object collections Study ASP .NET’s core objects Create a guest book CHAPTER Y our Web browser is a client in the client/server environment of the Web. Up to this point, this book has focused on client-side JavaScript development in Web browsers. For you to develop a full complement of Web development skills, you also need to understand the server side of the Web— in particular, how server-side scripting fits into Web development. In this chapter, you will study server-side scripting with ASP.NET. But before getting into server-side scripting, it’s helpful to set the stage by reviewing the fundamentals of client/server architecture. 507 508 Chapter 11 ASP.NET CLIENT/SERVER ARCHITECTURE There are many definitions of the term’s client and server. In traditional client/server architecture, the server is usually some sort of database from which a client requests information. A server fulfills a request for information by managing the request or serving the requested information to the client—hence the term, client/server. A system consisting of a client and a server is known as a two-tier system. One of the primary roles of the client, or front end, in a two-tier system is the presentation of an interface to the user.The user interface gathers information from the user, submits it to a server, or back end, then receives, formats...
Words: 5454 - Pages: 22
...Application Servers for E-Business Table of Contents Application Servers for E-Business - 2 Preface - 4 Chapter 1 - Introduction - 5 Chapter 2 - A Survey of Web Technologies - 22 Chapter 3 - Java - 44 Chapter 4 - CORBA - 65 Chapter 5 - Application Servers - 82 Chapter 6 - Design Issues for Enterprise Deployment of Application Servers - 114 Chapter 7 - Tying It All Together - 137 References - 160 For More Information - 163 page 1 Application Servers for E-Business Application Servers for E-Business Lisa M. Lindgren Auerbach Library of Congress Cataloging-in-Publication Data Lindgren, Lisa. Application servers for e-business / Lisa M. Lindgren. p.cm. Includes bibliographical references and index. ISBN 0-8493-0827-5 (alk. paper) 1. Electronic commerce. 2. Application software—Development. I. Title. HF5548.32 .L557 2001 658′.0553–dc21 00-050245 This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. A wide variety of references are listed. Reasonable efforts have been made to publish reliable data and information, but the author and the publisher cannot assume responsibility for the validity of all materials or for the consequences of their use. Neither this book nor any part may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, microfilming, and recording, or by any information storage or retrieval system,...
Words: 98260 - Pages: 394
...2/25/2016 Our client has requested a payroll management system for the entire organization. This organization has several branch offices spread across the U.S. that are connected through a Wide Area Network. The preceding information is an explanation of the architecture for the new payroll application. In addition to a diagram illustrating the new application, the types of technology for our architecture and the ethical concerns presented by it are also included. The client currently has a large data center and several branch offices in place. The new system is designed to utilize the existing infrastructure and platform for an easier integration. Using the existing infrastructure will help reduce the initial costs of implementation and administrative overhead. Both of these factors will reflect on the final TCO. The users will simply be able to log into the web portal and interact with the system. All of the processing power used will be that inside the datacenter managed by the same individuals as all other services. A client/server model will be utilized with the clients on a thin-client design for the new payroll application. The client/server model divides the processing between the client and server. Using the thin-client design places most of the processing on the server side. In this case the user interface and data input will be the only processing done on the client side. Limited and quick transactions between the client and server will be processed...
Words: 731 - Pages: 3
...of improvement. The following evaluations will be used to access the current state of the network: 1. Evaluation of Client Computer Hardware In the evaluation of client computer hardware, this evaluation seeks to identify all client computer assets owned by the company. All laptops and desktops owned by the company should be made available as needed in order for the evaluation to be as accurate as possible. It will be necessary to perform a review of all client computers that connect to the company assets. These machines will be analyzed for speed, performance, and reliability. I will look for variations in hardware manufacturers. Depending on the circumstance, it can result in better TCO (Total Cost of Ownership) if client computers are limited to one or two manufacturers. In addition, machines that are broken, out of warranty, or outdated will be recommended for repair or replacement. 1. 2. Evaluation of Client Computer Software In the evaluation of client computer software, I will seek to identify all software that is installed on client computers and being used in the workplace. This evaluation can be performed using software metering in software such as Microsoft System Center Configuration Manager, if installed. If not installed, this information will be collected manually by viewing the installed software on each machine. All client computer software will be evaluated to ensure that it is up to date and that it meets or exceeds industry standards. For...
Words: 778 - Pages: 4
...Task 1 Home Office (50 marks) A) Explain, giving three reasons (each reason a paragraph in length), why the home office would not use a client-server network? -The three reasons why the home office would not use a client server network, because there are no servers in this network. Servers play a very important role in a client network since it is equipped with the hardware and software for people to share documents other sorts of files through it. Other reason for not using client network is because the home office is two small and only got 2 or 3 computers with no intention to maximize it there is no point of using a client network. Using that network would also slow down the speed of the networking system. Third reason why the client /server network should not be chosen as the network system is because of that it would add additional cost and the effort would be useless if a certain virus or some malicious software connects into the network system and infects all computers at the home office. B) Discuss the functions of the switch and the modem as used in the home office network. (Each device a paragraph). Switch- A switch can increase the number of peripherals used in your network or allow you to add computers to your network. It's an affordable and easy way to expand your network. Switch is also a telecommunication device that receives a message from any device connected to it and then transmits the message only to the device from which the message...
Words: 1756 - Pages: 8
...advances in the development of high performance personal computer and networks. There is now an identifiable trend in industry toward downsizing that is replacing expensive mainframe computers with more cost-effective networks of personal computer that achieve the same or even better results. This trend has given rise to the architecture of the Client/Server Computing. The term Client/Server was first used in the 1980s in reference to personal computers on a network. The actual Client/Server model started gaining acceptance in the late 1980s. The term Client/Server is used to describe a computing model for the development of computerized systems. This model is based on the distribution of functions between two types of independent and autonomous entities: Server and Client. A Client is any process that request specific services from server processes. A Server is process that provides requested services for Clients. Or in other words, we can say “A client is defined as a requester of services and a server is defined as the provider of services.” A single machine can be both a client and a server depending on the software configuration. Client...
Words: 79055 - Pages: 317
....NET .NET have offers a client/server technology by deploying web-based applications written in ASP.NET on a Windows Server running IIS. For client desktop applications, .NET doesn’t provide any tools for automated deployment of application. The developer must compile the application and handle the install on each client. There are also isn’t an application server for .NET that meaning there is no centralized way to manage solution and clients. Most .NET developers use the Visual Studio IDE (Interface Design Environment) to develop their applications. There is no built-in version control with .NET, although you can setup your own SVN/CVS server to manage sharing code with multiple developers. Other Microsoft technologies such as SQL Server and Active Directory, have API’s available for .NET so developers can write code to integrate those services into their applications. Note that the API is available and the .NET framework doesn’t do much for you automatically. The .NET developer must control everything manually in their code. SERVOY...
Words: 400 - Pages: 2
...Performance Tuning Guidelines for Windows Server 2012 April 12, 2013 Abstract This guide describes important tuning parameters and settings that you can adjust to improve the performance and energy efficiency of the Windows Server 2012 operating system. It describes each setting and its potential effect to help you make an informed decision about its relevance to your system, workload, and performance goals. The guide is for information technology (IT) professionals and system administrators who need to tune the performance of a server that is running Windows Server 2012. For the most current version of this guide, see Performance Tuning Guidelines for Windows Server 2012. ------------------------------------------------- Disclaimer: This document is provided “as-is”. Information and views expressed in this document, including URL and other Internet website references, may change without notice. Some information relates to pre-released product which may be substantially modified before it’s commercially released. Microsoft makes no warranties, express or implied, with respect to the information provided here. You bear the risk of using it. ------------------------------------------------- Some examples depicted herein are provided for illustration only and are fictitious. No real association or connection is intended or should be inferred. ------------------------------------------------- This document does not provide you with any legal rights to any intellectual...
Words: 50142 - Pages: 201
...3.3.3 TCP Connection Overhead We now characterize the number of TCP connections used by the player to download the video segments at the same or different bitrate. This connection behavior impacts how well the client can estimate available bandwidth (many short connections lead to underestimation), and also the granularity at which a hosting CDN can load balance incoming segment requests. Across the diversity of players, platforms and networks, we observe two primary connection patterns: (i) individual TCP connections for each segment, and (ii) a long single TCP connection for all segments of the same rate. Interestingly, we find that players do not adopt the same strategy consistently across mobile platforms and network types. For example, as shown in Table 2, YouTube on Android/3G uses a single persistent TCP connection to download multiple segments, while in every other setting, it opens separate TCP connections for each segment. We now describe in detail the two patterns. Single TCP connection for all segments of the same rate. Over a WiFi network, Hulu reuses the same TCP connection to download all segments from the same bitrate. This behavior is consistent across both Android and iOS. In a scenario where the mobile...
Words: 578 - Pages: 3
...and you don’t have to go through the trouble of running cable everywhere. Another this type of design is good is because that the cost of maintenance is reduced significantly especially in terms of if and when you decide to expand your network as well. Scalability is also another very important factor because Wireless LAN systems can be configured in a variety of topologies to meet the needs of specific applications and installations. Configurations are easily changed and range from peer-to-peer networks suitable for a small number of users to full infrastructure networks of thousands of users that enable roaming over a broad area. Now in terms of the network architecture I would recommend using a Client server Architecture the reason being this type of architecture will allow clients to share data as well as storage space. Not only that but this type of architecture allows for the option of using shared applications as well as data and devices. In terms of the internet configuration I would recommend going with a LAN for a few reasons. The first reason being that it allows for centeralized IT administration which means that it makes it easier to manage multiple computers especially having a small business on a platform and they can also be managed individually as well....
Words: 2247 - Pages: 9
...functionality and demands to have the same functionality on the web. Is it always possible to achieve the costumer’s requirements on a web based solution or do you have to settle with an implementation of a standalone application? There are some factors that the answer depends on: performance, security, usability and implementation. The application that will be tested is developed in .Net and is a maintenance application for Business Intelligence (BI). We will have a short introduction to the Business Intelligence field to make you understand the purpose of the application. Keywords: Data Warehouse, web based, standalone, .NET, Business Intelligence Contents Abstract i Contents ii 1 Introduction 1 2 Background 3 2.1 Business Intelligence 3 2.1.1 The different steps in a Business Intelligence solution 4 2.2 Data Warehouse 4 2.3 Standalone vs. web based application 5 2.3.1 Standalone application 5 2.3.2 Web based application 5 2.3.3 Web or not from a Business Intelligence perspective 7 3 Method 9 3.1 Implementation 9 3.2 Performance 9 3.3 Security 9 3.4 Usability & Layout 10 4 Results 11 4.1 Implementation 11 4.2 Performance 13 4.3 Security 16 4.4 Usability & Layout 16 5 Analysis 19 5.1 Implementation 19 5.2 Performance 19 5.3 Security 20 5.4 Usability & Layout 21 5.5 Validity 21 6 Conclusion 22 7 References 23 8 Appendix...
Words: 9000 - Pages: 36
