Premium Essay

Computer Aided Instruction

In:

Submitted By tonyganalongo
Words 328
Pages 2
“AFFECTIVE AND NON-AFFECTIVE VARIABLES AS DETERMINANTS OF LEARNING OUTCOMES AND STUDY HABITS OF SPECIAL SCIENCE CLASSES (SSC) STUDENTS IN ADVANCED BIOLOGY AT BATAAN NATIONAL HIGH SCHOOL, ACADEMIC YEAR 2011-2012”

_______________________________________

A Chapter I Proposal to the
College of Education
Bataan Peninsula State University (Balanga Campus)
City of Balanga, Bataan
_______________________________________

In Partial Fulfillment of the Course Requirement in
Educational Research (EDUC 115)
Bachelor in Secondary Education
Major in Biological Science

_____________________________________

By:
TONY R. GAÑALONGO
February 07, 2012
CHAPTER I

THE PROBLEM AND ITS BACKGROUND

Introduction

The world today is experiencing a rapid change in almost all fields of endeavor. Science has brought many changes in people’s lifestyle. It’s difficult if not impossible to live today and not experience the results of science investigations. Everyday occurrences such as hearing the weather forecast, watching television, talking on the telephone, and flying through the air are made possible through science. These are handiworks of scientists and proofs that science has become highly important in our lives and continue to change our lives and lead us to progress.
In education the center of any educative process is the learner. Since it is the task of the teacher to guide the students’ learning at various activities and stages of development, there is a need to know and understand each learner as a unique individual who is responding to a very complex environment. The school is considered the child’s formal education institution. It aims for the total development of the child, cultivating not only his mind but also his hand as well as his heart. In schools, science and technology has been brought as extension of universalization of education.
According

Similar Documents

Free Essay

Use of Computer Aided Instruction in Teaching and Learning of Mathematics

...Abstract The paper investigates the use of computer aided instruction (CAI) in teaching and learning mathematics. It also explores the use of Instructional Materials Aided Methods (IMAM) as a close substitute. From the study, it was clear that computer-aided instruction enhanced the students performance in mathematics The design of the study was experimental. The hypothesis were tested using T-ratio at 0.05 level of significance and a reliability index of 0.85 was calculated from the test items; while the data were analyzed using mean and standard deviation. Introduction One of the problems of teaching and learning is the method of imparting knowledge to learners. According to stone (1991), the major difficulty in sciences is the method by which the subjects were customarily taught without regard to instructional materials. The pedagogical approach in imparting knowledge to learners has become inadequate to their needs. Mathematics, like other science subjects, recorded poor students performance both in national and international examination (Ali, 1983). Many factors contributed to the performance of students in mathematics examination Akale, (1996), Okebukola and Jegede (1996), Ottiah (1997) and Ali (1998). The factors include: a. Inability of the mathematics teachers to put across the mathematics concepts to the students. b. Lack of skills and competence required for teaching mathematics. c. Shortage of qualified mathematics teachers. d. Lack of teaching materials...

Words: 1246 - Pages: 5

Free Essay

3d Printing

...How exactly does a 3D printer work? Before the 3D printer was developed, the 2D printer was still a fascinating machine to many people. With a 2D printer, what was printed out on a piece of paper was put together and designed on a computer program such as Microsoft Word or Presentations. The file that the printed image or information was created in holds the instructions that the printer is to follow. A 3D printer also needs a file and instructions to print. The goods or designs that are printed can be customized, because altering them will not require complete retooling, only slightly adjusting the instructions in the software. The file is known as a Computer Aided Design (CAD) or Computer-Aided Manufacturing (CAM) file that requires the use of a 3D modeling program, or with a 3D model using a 3D scanner. This software quickly slices the model or design on the program into hundreds or thousands of thin-sliced, horizontal layers. The layers get printed one by one atop of one another until the 3D object is complete. Owners of 3D printers can choose between 2 types of plastic strands: acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA). Some 3D printers can use both kinds of plastic, while others only work with one. These plastics are available on spools with plastic strands/strings that are usually 1.75 millimeters thick or 3 millimeters thick. Gears work to pull the filament through the print head. Immediately before it is pushed through the pointed nozzle, the...

Words: 650 - Pages: 3

Premium Essay

Mr Adam

...Hardware and software ICT system in the head office Hardware -‘There is at least one networked laser printer in each department’ ‘There is also an A3 colour laser printer attached to the marketing manager’s workstation as a local printer’ Software -‘All the standard office software is stored on the server, as is the photo editing software’ ICT system in the warehouse and distribution centre Hardware -‘The warehouse manager, the operation director and the distribution manger each has a workstation on their desk and a net worked laser printer’ Software- ‘The warehouse stock database is stored on the server, along with specialist stock management software and scheduling software used by the distribution manager.’ ‘Standard office software is also stored on the server.’ ICT system in the supermarket Hardware- ‘Each checkout has an EFTPOS terminal with a touch screen, barcode reader, customer display screen, and chip and pin card reader.’ ‘The store manager has a net workstation and a networked and laser printer.’ Software- ‘A router provides broadband access to the internet, including a secure link to the banking system for electronic funds transfer.’ ‘The supermarket’s stock database is stored on the server, along with word processing and spreadsheet software. Input, processing and output Checkout procedures Input- ‘The checkout operator scans the barcode of each item’ Processing- ‘The product code is used to look up the description...

Words: 1899 - Pages: 8

Free Essay

Knowledge-Based System for Selection of Manufacturing Resources

...is a computer program that uses knowledge to solve complex problems. The knowledge’s are gain using various knowledge representation techniques rules, frames and scripts. Having this in hand, will gave user documentation of knowledge, intelligent decision support, self learning, reasoning and explanation of the system. Knowledge based systems further enhanced the expert system technology into the decision making framework. Expert system has been the tools and techniques perfected by researchers to deduce decision influences based on codification of knowledge. There are four different system software’s needed to manufacture part (e.g. Fish Head) in the manufacturing production. First of all is Computer Aided Design (CAD). It involves the use of computer to create design drawing and product models. The CAD design is usually associated with interactive computer graphics known as CAD system. CAD is the process to create the modeling for object by using the three elements which are computer graphics, geometry modeling and design. CAD system is a powerful tool and is used in the design and geometric modeling of components and products (McMohan, C. and Browne, J. 1998). Second is the Computer Aided Process Planning (CAPP). It is a tool to simplify and improve process planning. The planning begins with engineering drawings, specifications, parts or material lists and a forecast of demand (Kalpakjian, S. and Schmid, S. 2006). Thirdly is Computer Aided...

Words: 1621 - Pages: 7

Free Essay

About Autocad

...and 3rd computer-aided design and drafting. Available since 1982 as a desktop application since 2010 as a mobile web and cloud-based application marketed as AUTOCAD 360. AUTOCAD was first released in December 1982, running on microcomputers with internal graphic controllers. Prior to the introduction of AUTOCAD, most commercial CAD programs ran on mainframe computers or minicomputers, with each CAD operator (user) working at a separate graphical terminal. AUTOCAD is used across a wide range of industries, by architecture, project managers, engineers, designers, and other professionals. it is supported by 750 training centers worldwide as of 1994. As Autodesk’s flagship product, by March 1986 AUTOCAD had become the most ubiquitous CAD program worldwide. As of 2014, AUTOCAD is in its twenty-ninth generation, and collectively with all its variants continues to be the most widely use CAD program throughout most of the world. Western Institute of Technology La Paz, Iloilo city September 30, 2014 Ms. Chenny Ruth Lianda Faculty, College of Art and Sciences Western Institute of Technology Dear Ma’am Lianda: In compliance with the fulfillment of the requirements on the course writing in the discipline and in accordance with your oral instruction dated August 28, 2014, we are submitting our library research paper entitled “The Contribution of Computer in the Field of Engineering”. The main purpose of the research paper is to determine the use of the computer on the...

Words: 277 - Pages: 2

Premium Essay

Process Selection

...need for management of technology. 5. List some reasons for redesign of layouts. 6. Describe the basic layout types, and the main advantages and disadvantages of each. 7. Solve simple line-balancing problems. 8. Develop simple process layouts. Glossary assembly line Standardized layout arranged according to a fixed sequence of assembly tasks. automation Machinery that has sensing and control devices that enable it to operate automatically. balance delay Percentage of idle time of a line. cellular production Layout in which workstations are grouped into a cell that can process items that have similar processing requirements. computer-aided manufacturing (CAM) The use of computers in process control. computer-integrated manufacturing (CIM) A system for linking a broad range of manufacturing activities through an integrating computer system. cycle time The maximum time allowed at each workstation to complete its set of tasks on a unit. fixed-position layout Layout in which the product or project remains stationary, and workers, materials, and equipment are moved as needed. flexible manufacturing system (FMS) A group of machines designed to handle intermittent processing requirements and produce a variety of similar products. group technology The grouping into part families of items with similar design or manufacturing characteristics. intermittent processing Nonrepetitive processing. line balancing The process of assigning tasks to workstations in such a...

Words: 294 - Pages: 2

Free Essay

Ikkkj

...Item button. • You will be notified by email when the requested item is ready for you to pick up. Please check the email account provided to you by the College regularly; address of this email account is shown at myRecord (see “myRecord” below). • You may cancel your hold after logging in myRecord. Subject • The library uses standard subject headings as established by the Library of Congress. e.g. Environmental management -- Standards Keyword • Key in a distinctive word or phrase from the author, title or subject field, or from the table of content. e.g. computer aided design • To search by fields, select a field from the drop down list. • To search for topics that have two or more concepts, select AND from the drop down list, or type AND between them. e.g. computer aided design and fashion • To look for items with terms that are related, select OR from the drop down list, or type OR between the terms. e.g. (computer aided design or cad) and fashion • To exclude unwanted word, select AND NOT from the drop down list, or type AND NOT before it. e.g. amazon and not river • To find all words that begin with...

Words: 1359 - Pages: 6

Free Essay

Problems and Prospectspharmaceutical Industry in Bangladesh

...Tk. 18.25 | Tk.3,650.00 | 02 | 20X500 ml Bottle:Size: H-8”X W-12”X L-14.5”Paper: 3 Ply with both side linerPrinting: One color skin printing | 200 (Two Hundred) Pcs | Tk. 18.50 | Tk.3,700.00 | | 12X1Liter Bottle:Size: H-10.5”X W-12”X L-14”Paper: 3 Ply with both side linerPrinting: One color skin printing | 200 (Two Hundred) Pcs | Tk. 21.00 | Tk.4,200.00 | | 12X1 Kg Box:Size: H-13”X W-14.5”X L-14.5”Paper: 3 Ply with both side linerPrinting: One color skin printing | 200 (Two Hundred) Pcs | Tk. 28.00 | Tk.5,600.00 | TOTAL: | TK. 17,150.00 | Taka Seventeen thousand one hundred fifty only. | TERMS & CONDIT/IONS: 1. Size, Paper, Text & Design etc. exactly as per our specimen & instruction. 2. Before going for Final Printing gets written approval from our responsible person to be obtained by you. 3. PACKING: The above packing materials must be packed in standard carton otherwise the consignment will not be accepted by our store. 4. Positive of the design must be returned to us after completion of the work. 5. DELIVERY: Within 7 days of final approval to our office 6. PAYMENT: As usual. 7. ± (5-10 %) quantity deviation will be acceptable. NOTE:...

Words: 388 - Pages: 2

Free Essay

Technological Impact on Creativity: Assessing the Impact of Computer Modeling and Rapid Prototyping on Perceived Creativity

...THE FLORIDA STATE UNIVERSITY COLLEGE OF VISUAL ARTS, THEATER, AND DANCE TECHNOLOGICAL IMPACT ON CREATIVITY: ASSESSING THE IMPACT OF COMPUTER MODELING AND RAPID PROTOTYPING ON PERCEIVED CREATIVITY By ANTHONY L. CONETTA A thesis submitted to the Florida State University in partial fulfillment of the requirements for the degree of Masters of Fine Arts in Interior Design Degree Awarded: Fall, 2012 i Anthony Conetta defended this thesis on June 26, 2012. The members of the supervisory committee were: Marlo Ransdell Professor Directing Thesis Eric Wiedegreen Committee Member Jim Dawkins Committee Member The Graduate School has verified and approved the above-named committee members, and certifies that the thesis has been approved in accordance with university requirements. ii ACKNOWLEDGEMENTS [Type or paste your acknowledgements paragraph(s) here] iii TABLE OF CONTENTS LIST OF TABLES .......................................................................................................................... 1  LIST OF FIGURES ........................................................................................................................ 2  ABSTRACT .................................................................................................................................... 3  CHAPTER ONE ............................................................................................................................. 4  INTRODUCTION...

Words: 16731 - Pages: 67

Premium Essay

Operations Management Studyguide

...Chapter 5- GLOBAL COMPANY PROFILE: Regal Marine world’s 3rd largest boat manufacturer; Regal uses CAD computer aided design; Regal uses JIT inventory to deliver parts as needed. GOODS & SERVICES SELECTION: The good or service provided is basis for an organization’s existence and the key to success; To maximize success, companies focus and concentrate on few products; Companies must look constantly for new products to design; Product Decision- to develop, implement a product strategy that meets the demands of the marketplace with a competitive advantage; Product strategy is 1 of 10 decisions of OM and focuses on developing a competitive advantage thru differentiation, low cost, rapid response, or combination of these. PRODUCT STRATEGY OPTIONS: Product Selection- the choosing of good or service to provide customers or clients; Differentiation- by offering a distinctly unique and high quality product; Taco Bell- has developed a low cost and high value product line; Toyota- a rapid response to changing customer demand; PRODUCT LIFE CYCLES: Intro Phase- the product is being fine-tuned for market, negative cash flow due to research, product development, process modification, and supplier development; Growth Phase- product design is stabilizing, requires effective forecasting of capacity requirements; Maturity Phase- high sales revenue, competitors are established, improved cost control, reduction in options of product line necessary for profitability and market share; Decline Phase-...

Words: 2284 - Pages: 10

Premium Essay

Arthur Wilson

...coordinating diverse mechanical engineering ,mechanical design and design drafting disciplines to effect optimum results in adhering to completion schedules and maintaining high quality, safe design and construction relating to the aerospace and defense industry per ANSI-Y-14.5 & DOD-D-100/DOD-STD-1000. EDUCATION: 1980 - 1983 Los. Angeles Trade Technical College Major Course of Study and Details of Classes Mechanical Design Drafting Computer Aided Drafting Tech. Illustration College Level Mathematics Mathematics for engineers ANSI-Y-14.5 Geometric Tolerances and Dimensioning Tolerance analysis and application in design/manufacturing practice. Tolerance specification analysis ANSI and ISQ standards, geometry through geometric dimensioning and tolerance Materials selection in mechanical design: Selecting materials for engineering applications. The major families of materials, their properties, and how their properties are controlled; case studies and design projects emphasizing materials selection. Programming for Desktop-computers 1967 -...

Words: 3044 - Pages: 13

Premium Essay

Comprehensive Technology Plan

...Comprehensive Classroom Technology Plan Introduction This Comprehensive Classroom Technology Plan details ideas and concepts that I wish to put into practice in my future high school classroom. This plan demands common sense and excellence and focuses on providing students information for them to become their own digital citizens. The categories of this plan include my mission and vision for my classroom, my communication plan for engaged groups in the educational community, classroom instructional technology integration ideas, digital assessment thoughts, technological ethics principles, and my reflection of this plan. Section One: Mission and Vision Statement Vision Statement My classroom will be a technology friendly environment that strives for academic, digital, and personal excellence. It will be a room of comfort, positivity, and collaboration with the cornerstone of respect. Mission Statement I will provide a technology friendly classroom environment by teaching students the proper use of technology, being open to technological developments and ideas (from students and outside sources), including technology in the curriculum and daily lessons, and ensuring they are capable of achieving the educational technology standards for their respective grades. We will foster comfort by using communication and collaboration and being open and understanding of the various needs within the classroom and that each person has unique strengths. I will integrate technologies...

Words: 5169 - Pages: 21

Free Essay

Computer Application

...Application of computer in different fields ← Business. ← Medical. ← Banking sector. ← Education. ← Service sector. ← Defense. ← Engineering and Robotics. ← Entertainment. BUSINESS ← MARKETING :- Computer is mainly used for sales promotion, e.g. designing of advertisements. Internet marketing (e-marketing). Comparing the sales figure. Studying the demand graph. ← PRODUCTION :-It is used for making design of product. CAD (computer aided design) ← HUMAN RESOURCE :- Computer is used in keeping the records of all the employees. Recruitment and Selection. ← FINANCE :- Helps in making the financial statement. Comparing the financial statement of two year. Preparing the “BUDGETS”. MEDICAL ← Research :-Used in different pharmaceutical companies. ← Hospitals :- Mainly computer is used for keeping the record of patients. Inventory of medicines. Surgeries. ← Diagnosis :- CT scan. Ultra-sound. Blood test. Electro-cardio gram. BANKING SECTOR Maintaining the record and storing the files instead of manual record. Internet banking (e-banking). Transaction from ATMs. Selling their insurance online. providing 24×7 online services. EDUCATION ← Higher education :- All the universities and colleges are furnished with computer labs. ← Online education :- This can done with the help of computer and internet...

Words: 292 - Pages: 2

Free Essay

Design of Goods and Services

...features, and high quality. Increasing sales at the Orlando, Florida, family-owned firm suggests that the strategy is working. Differentiation goes beyond physical characteristics to encompass everything about the boat that influences the value that the customers derive from it. Operations managers at Regal assist in defining everything about their boats that will influence the potential value to the customer. This may be the convenience of a broad product line, product features, or product service. Product service can manifest itself through convenience (location of boat distributors or stores), training, boat delivery, or maintenance services. As a quality boat manufacturer, Regal Marine starts with continuous innovation, as reflected in computer aided design (CAD), high-quality molds, and close tolerances that are controlled through both defect charts and rigorous visual inspection. The CAD technology speeds the development process. A Regal design engineer can start with...

Words: 369 - Pages: 2

Premium Essay

Application of Cad for Designing Parts with Complex Shapes

...Using separate methods of designing and making activities in quantity-production of jewelleries as a case, this paper will show how Computer Aided Designs (CAD) can be applied for designing jewelleries with complex shapes. Using separate methods of designing and making activities in quantity-production of jewelleries as a case, this paper will show how Computer Aided Designs (CAD) can be applied for designing jewelleries with complex shapes. Ng Jian Long (U095062A) Ng Jian Long (U095062A) Term Paper Assignment (CAD) Application of CAD for designing parts with complex shapes Term Paper Assignment (CAD) Application of CAD for designing parts with complex shapes ME3261/ME3261E Term Paper Assignment (CAD) Requirements: * Covering page: Title, Name, and Student Card Number. * The write-up should start with an introduction and end with a conclusion. References used in the body of the write-up should also be listed. * Source of materials: The specific case study concerns a reported application, such as from a magazine, a journal or the web sites – it is not expected to be a case study done by you. * Length limit: No more than 8 pages in the main body of the report (from introduction to reference section). Additional materials, if any, can be put in the Appendix. * Font size limit: No less than 10. * Spacing limit: 1.5 spaces should be used. * Submission deadline: October 30, 2012. Please upload the .PDF or MS-Word file to the ME3261 IVLE...

Words: 3098 - Pages: 13