U s e r
M a n U a l
table of contents
Accessories Mounts + Accessories HERO3 Features Camera LCD Status Screen Camera User Interface Flow Chart Software Updates Basics 4 5 6 8 9 10 10 13 20 26 28 36 38 39 40 41 43 45 46 52
Join the GoPro party at facebook.com/gopro to see what other GoPro owners are capturing and sharing. Share your footage and be a part of the GoPro movement!
Camera Modes Camera Settings Delete Set Up Wireless Controls Storage/SD Cards System Requirements Transferring Files Playback Battery Life Important Warning Messages Camera Assembly Customer Support
2
3
wear it. MoUnt it. love it.
Premium ACCessories hero3 ACCessories
Wrist Housing
see More at gopro.com mounts + ACCessories
LCD Touch BacPac™
Replacement Housing
Helmet Front Mount
Chest Mount Harness
Handlebar/Seatpost/ Pole Mount
Surfboard Mounts
Rechargeable Li-Ion Battery
Floaty Backdoor
Battery BacPac™ Lens Replacement Kit
Head Strap
Suction Cup Mount
Vented Helmet Strap
Caps + Doors
Roll Bar Mount
Wi-Fi Remote™ 32GB/16GB microSD™
Tripod Mount
Anti-Fog Inserts
Grab Bag of Mounts
The Frame Mount (HERO3 accessory)
More HERO3 accessories available at gopro.com
Curved + Flat Adhesive Mounts
Side Mount
Camera Tethers
Wi-Fi Remote Mounting Kit
4
5
Hero3 featUres
Hero3 featUres
1. Status Indicator Lights (Red) 2. SHUTTER/SELECT Button 3. LCD Status Screen 4. Wi-Fi Indicator Light (Blue ) 5. POWER/MODE Button 6
6. Micro HDMI Port (Cable not included) 7. microSDTM Card Slot (SD card not included) 8. mini-USB Port (Supports Composite A/C cable/3.5mm stereo mic adapter, not included)
9. HERO Port 10. Battery Door 11. Wi-Fi ON/OFF Button 12. Audio Alert
7
caMera lcd statUs screen
The LCD screen displays the following information about HERO3 modes and settings:
caMera User interface flow cHart
MODES
CAMERA SETTINGS
1. Camera modes/FoV (Field of View) 2. Capture setting modes (not shown) 3. resolution/FPs (Frames Per second) 4. time interval settings: (not shown) 5. Counter 6. time/storage/Files 7. Battery Life note: The icons displayed above will vary depending on what mode your camera is in.
SET UP
WI-FI
*note: White Balance only appears in your camera display if Protune mode is turned on. Playback only appears if Playback is activated.
8
9
software UPdates
GoPro releases product updates through software updates. Check to see if any updates are available for your camera or other GoPro products. Visit: gopro.com/update.
UsinG YoUr Hero3: basics CAmerA DeFAuLt settinGs
The HERO3 White Edition camera powers up with the following default settings: Video resolution Photo resolution Photo Burst time Lapse Wi-Fi Pro tiP: 1080p30fps 5 Megapixels (MP) 3 photos in 1 second 0.5 seconds OFF
UsinG YoUr Hero3: basics GettinG stArteD
Before using your hero3 for the first time: 1. insert a microsD™, microsDhC™ or microsDXC™ card into the card slot with label facing forward, narrowest part of the card first. Speed Class 4 or higher cards are recommended. When using 0.5 second time Lapse, a Speed Class Rating 10 is required. 2. Place battery into the camera. 3. Charge battery. The included lithium-ion battery comes partially charged. To charge, connect the included USB cable to camera and connect the other end of the cable to a power source such as a computer, GoPro Wall Charger or GoPro Auto Charger. No damage will occur to the camera or battery if used prior to a full charge. status indicator Lights when camera is oFF and charging, show: • status indicator Lights are on when charging. • status indicator Lights are oFF when charging is complete.
Want to change your ViDeo and Photo settings? ▶See settinGs menu to make changes.
Pro tiP:
▶See BAtterY LiFe for more information. ▶See Protune for more information. 10 11
UsinG YoUr Hero3: basics PoWerinG on AnD oFF oVerVieW
UsinG YoUr Hero3: caMera Modes
The HERO3 features several camera modes. To cycle through the modes, press The modes will appear in the following order:
ViDeo Photo Photo Burst time LAPse Record Video Capture single Photo Capture Burst photos Capture Time Lapse photos Appears only if the camera is plugged into a TV/HDTV. PLAYBACK allows you to play Photos and Videos on a TV/HDTV (via optional Micro HDMI cable or A/V composite cable).
.
PLAYBACK
to power on: Press and release . The red status indicator Lights flash three times and the sound indicator emits three beeps. to power oFF: Press for two seconds, then release. The red status indicator Lights flash several times and the sound indicator emits seven beeps. Want to turn your HERO3 into a “one-button” camera that automatically starts recording Photos or Videos once it turns on? Set the camera to one Button mode. ▶See one Button mode for more information. 12
Pro tiP:
Use Photo Burst to capture fast moving subjects.
▶See PLAYBACK for more information.
Pro tiP:
13
UsinG YoUr Hero3: caMera Modes ViDeo
To record Video, verify the camera is in Video mode. If the Video icon on your camera’s LCD screen is not showing, press repeatedly until it appears. to start recording: Press and release . The camera will emit one beep and the red status indicator Lights will flash while recording. to stop recording: Press and release . The red status indicator Lights flash three times and the camera emits three beeps to indicate recording has stopped. The HERO3 automatically stops recording when the memory card is full or the battery is out of power. Your video will be saved before the camera powers off. ▶See ViDeo mode for instructions on how to change resolution settings.
UsinG YoUr Hero3: caMera Modes Photo
To capture a Photo, verify the camera is in Photo mode. If the Photo icon your camera’s LCD is not showing, press repeatedly until it appears. to take a photo: Press and release . The camera beeps two times and the red status indicator Lights flash. ▶See Photo modes for instructions on how to change resolution settings and other Photo features. on
14
15
UsinG YoUr Hero3: caMera Modes Photo Burst
In Photo Burst mode, your camera takes multiple photos in short time intervals— 3 photos/1 second. To capture a Photo Burst series, verify the camera is in Photo Burst mode. If the Photo Burst icon on your camera’s LCD screen is not showing, press repeatedly until it appears. to take a Photo Burst series: Press and release . The red status indicator Lights flash and the camera beeps multiple times. Pro tiP: Sometimes 30 photos/1 second is too fast. Try a slower Burst setting to better match the action.
UsinG YoUr Hero3: caMera Modes time LAPse time Lapse mode captures a series of photos at 0.5, 1, 2, 5, 10, 30 or 60 second intervals. When using the 0.5 seconds setting, an SD card with a Speed Class 10 Rating is required. To capture a time Lapse series, verify the camera is in time Lapse mode. If the Time Lapse icon is not showing on your camera’s LCD screen, press repeatedly until it appears. to take time Lapse: Press and release . The camera initiates countdown and the red status indicator Lights flash each time a Photo is taken. to stop time Lapse: Press and release . The red status indicator Lights flash three times and the camera emits three beeps to indicate that time Lapse has stopped. ▶See time LAPse for instructions on how to change the interval settings.
▶See Photo Burst for instructions on how to change the interval settings.
16
17
UsinG YoUr Hero3: caMera Modes settinGs
The settings menu allows you to adjust a variety of camera settings including: Video resolution Photo resolution time Lapse Photo Burst • and more ▶See settinGs menu to make changes, learn how to navigate menu options and read more details on each setting.
UsinG YoUr Hero3: caMera Modes PLAYBACK
You can playback your GoPro Photos and Videos on a TV/HDTV or with the LCD Touch BacPac™ (optional accessory). Playback appears as a camera mode when camera is powered on and plugged into a TV/HDTV. ▶See PLAYBACK for more information on viewing your Videos and Photos.
18
19
caMera settinGs settinGs to enter the settings menu: 1. Verify the camera is in the settings menu. If the setting icon on your camera’s LCD screen is not showing, press repeatedly until it appears. 2. Press 3. Use 4. Press to enter menu.
Video Resolution 1080p
caMera settinGs
VIDEO RESOLUTION/FPS/FOV MODES the hero3 White edition offers the following Video Capture modes:
NTSC fps 30fps PAL fps 25fps Field of View (FOV) Ultra Wide Screen Resolution 1920x1080 16:9 1280x960 4:3 Best Use
to cycle through the various settings options. to select desired option. for two seconds or cycle through to and press .
720p 60fps 50fps Ultra Wide 1280x720 16:9 1280x720 16:9 960p 30fps 25fps Ultra Wide
Use this mode when camera is mounted on a vehicle, tripod or other stable object. High-quality 4:3 video. Good when shooting in low light conditions. Use for body-mounted shots. Best resolution frame rate for handheld shots and when slow motion is desired. Best resolution for handheld shots and low light conditions. Choose this mode when camera is mounted on vehicle, tripod or other stable object. Good when standard definition is acceptable.
5. To exit, hold down Pro tiP:
If at any time you wish to exit from the settinGs menu, press and hold for two seconds.
720p
30fps
25fps
Ultra Wide
WVGA
60fps
50fps
Ultra Wide
848x480
20
21
caMera settinGs
TIME LAPSE Several time interval options are available for time Lapse mode, including 0.5, 1, 2, 5, 10, 30 and 60 seconds. LOOPING VIDEO
caMera settinGs
Looping Video mode allows you to record a continuously looping video that button to stop it. Looping Video is overwrites itself until you press the not available if Protune mode is turned on. Looping Video options inlcude:
UPSIDE DOWN Mounting your HERO3 upside Down but wish the files to appear upright when viewing or editing? This setting eliminates the NEEDto flip your video or photos after recording. Camera right side up (Default) Camera upside down
OFF Max video 5 min video 20 min video
(Default) Camera records until memory card is full, then overwrites with a new video. Camera records for 5 minutes, then begins a new video, progressively overwriting the previous 5 minute video. Camera records for 20 minutes, then begins a new video, progressively overwriting the previous 20 minute video. Camera records for 60 minutes, then begins a new video, progressively overwriting the previous 60 minute video. Camera records for 120 minutes, then begins a new video, progressively overwriting the previous 120 minute video. Multiple chapter files are written to your memory card. This allows for small segments of content to be overwritten during loop recording. When viewing on a computer screen you will see separate files for each time segment. Use video editing software if you wish to combine files into a longer video.
SPOT METER Turn on spot meter when filming from within a dark space pointing the camera into a brighter setting, such as filming the outdoors from within a car. When spot meter is set to on, appears in the LCD window. OFF ON (Default)
60 min video 120 min video
Pro tiP:
note: Looping Video is not enabled when in Protune mode. 22 23
caMera settinGs
SET UP MENU The set up menu allows you to adjust the following camera settings: Default mode at Power up one Button mode ntsC/PAL on screen Display status indicator Lights sound indicator month/Day/Year/time ▶See set uP menu section for a complete list of set up options. WIRELESS CONTROLS
caMera settinGs
The HERO3 camera’s built-in Wi-Fi allows you to connect to the Wi-Fi Remote or smartphone/tablet via the GoPro App. When Wi-Fi is on, your Wi-Fi status indicator Light will blink blue. to turn Wi-Fi on/oFF: to turn Wi-Fi on/oFF. The most recently used Wi-Fi mode will be Press active when Wi-Fi is on. ▶See WireLess ControLs section for a complete list of wireless functions
24
25
caMera settinGs
DELETE Delete the last file or all files and format the memory card. During delete LAst or ALL, the status indicator Lights blink until operation is complete. CANCEL (Default) LAST ALL to delete LAst or ALL: icon on your 1. Verify the camera is in settings mode. If the settings camera’s LCD screen is not showing, press repeatedly until it appears. 2. Press 3. Use 4. Press 5. Use to enter settings menu. to cycle through settings to locate to enter Delete. to cycle through options. . and press . . EXIT From the eXit screen, press Pro tiP:
caMera settinGs
to exit the settings menu.
If at anytime you wish to exit from the CAmerA settinGs menu, press and hold for two seconds.
6. Select highlighted option by pressing 7. To exit, hold down Pro tiP:
for two seconds or cycle through to
Use caution — by selecting ALL, the memory card will be formatted, deleting every file on your SD card.
26
27
set UP set uP to enter the set up menu: 1. Verify the camera is in settings mode. If the settings icon on your camera’s LCD screen is not showing, press repeatedly until it appears. 2. Press 3. Use 4. Press 5. Use 6. Press to enter . . to cycle through settings to locate to enter set up. to locate the desired option to change. to select the desired option. for two seconds or cycle through to and DEFAULT MODE AT POWER UP
set UP
You can set the camera’s Default mode at power up to any of the following modes: (factory default)
7. To exit, hold down press .
28
29
set UP
ONE BUTTON With one Button mode selected, the camera automatically begins recording when powering the camera on. one Button mode can be configured to start in Video or time Lapse. OFF ON to turn one Button mode on: icon on your 1. Verify the camera is in settings mode. If the settings camera’s LCD screen is not showing, press repeatedly until it appears. 2. Press 3. Use 4. Press 5. Use 6. Press 7. Use 8. Press to enter menu. . (Default) one Button moDe (continued) To exit one Button mode: 1. Power camera on. 2. Press and hold 3. Press 4. Use 5. Press to enter. to highlight oFF. to select. for two seconds or cycle through to until shows in the LCD window.
set UP
6. To exit, hold down
and press
.
to cycle through settings to locate to enter set up. to cycle through to locate to enter one Button menu. to cycle through options. to select a highlighted option. .
Pro tiP:
To stop the capture process (ViDeo or time LAPse) when in one Button, press and hold for two seconds. You will return to the one Button menu where you can turn one Button mode oFF.
note: one Button mode is disabled when connected to Wi-Fi Remote or GoPro App.
9. To exit, hold down
for two seconds or cycle through to
and press
.
Next time you power your camera on, it will begin recording in its Default for two seconds. Power up mode. To stop recording, push and hold 30 31
set UP
NTSC / PAL The ntsC and PAL settings govern Video recording frame rate and playback when viewing Video on a TV/HDTV. Select ntsC when viewing a TV/HDTV in North America. Select PAL if viewing on a PAL TV/HDTV (most televisions outside of North America) or if viewing on a PAL TV/HDTV in any region. ntsC (Default) 1080p/30fps 960p/30fps 720p/60fps 720p/30fps WVGA/60fps ONSCREEN DISPLAY To display or hide the recording icons and file information on video or the viewing screen during playback, turn onscreen Display (osD) oFF or on. OFF ON (Default) PAL 1080p/25fps 960p/25fps 720p/50fps 720p/25fps WVGA/50fps STATUS INDICATOR LIGHTS
set UP
Keep all four status indicator Lights active, only two active (front and back) or turn oFF all lights. 4 2 OFF SOUND INDICATOR You can adjust volume or turn oFF the sound indicator. 100% 70% OFF MANUAL POWER OFF The HERO3 can be configured to automatically power oFF after a specific period of inactivity (when no Videos or Photos are being taken and no buttons have been pressed). MANUAL 60 sec 120sec 300 sec (Default) (Default) (Default)
32
33
set UP
MONTH / DAY / YEAR / TIME Set the HERO3 clock to ensure Video and Photo files are saved with the correct date and time. to change month/Day/Year/time: icon on your 1. Verify the camera is in settings mode. If the settings camera’s LCD screen is not showing, press repeatedly until it appears. 2. Press 3. Use 4. Press 5. Use to enter menu. . to cycle through settings to locate to enter set up. to locate . EXIT From the eXit screen, press Pro tiP: to exit the set up menu.
set UP
If at anytime you wish to exit from the set uP menu, press and hold for two seconds.
6. Press to enter month/Day/Year/time sub-menu; month (mm) will be highlighted. 7. Press 8. Use 9. Press to access the list of months (1 to 12). to cycle through list until desired selection is highlighted. to select. .
10. To advance to the next option, press
11. Repeat steps 7, 8 and 9 to make selections for day (DD), year (YY), hour (hh) and minutes (mm). 12. To exit, hold down press . for two seconds or cycle through to and
note: If the battery is removed from the camera for an extended period of time month/DAY/YeAr/time will need to be set again. 34
35
wireless controls WireLess ControLs
The built-in Wi-Fi allows your HERO3 camera to connect to the Wi-Fi Remote and smartphone/tablet via the GoPro App. to turn Wi-Fi on/oFF via the Wi-Fi button: to turn Wi-Fi on/oFF. When turning Wi-Fi on the Wi-Fi mode will Press be set to the most recently used mode. usinG hero3 With the Wi-Fi remote not PAirinG Pair your HERO3 with the Wi-Fi Remote to control your camera remotely. The Wi-Fi Remote can control up to 50 cameras at a time at distances of up to 600’/180m in optimal conditions. 1. Power on the HERO3 and turn Wi-Fi on. 2. Press 3. Press 3. Use 4. Press 6. Press 7. Use 8. Press 9. Use 10. Press 36 to cycle through to the settings menu. to enter . . Pro tiP: to cycle through to locate . on your Wi-Fi remote: 1. Turn on the GoPro Wi-Fi Remote. 2. While holding 3. Once you see , press and release , you can release
wireless controls WireLess ControLs (ContinueD)
. .
will appear once the Wi-Fi Remote and camera have 4. A check successfully paired. The Wi-Fi Remote’s LCD screen will now mirror the HERO3 LCD screen. usinG the hero3 With the GoPro APP The GoPro App lets you control your camera remotely using a smartphone or tablet. Features include full camera control of all settings, live video preview to your smartphone or tablet for easy shot framing and more. The GoPro App is available for free at the Apple App Store and is coming soon to Google Play. Before you hit the shutter, see what your HERO3 camera sees by viewing it on your smartphone or tablet’s screen.
to enter Wireless Controls. again to enter the sub-menu. to select Wi-Fi rC. to select it. to select Current or neW. to select desired option.
5. You will see
▶See gopro.com for more information.
37
storaGe/Microsd cards
The HERO3 camera is compatible with 2GB, 4GB, 8GB, 16GB, 32GB and 64GB capacity microsD, microsDhC and microsDXC memory cards. While all speed class ratings are compatible, GoPro requires using an SD card with Speed Class Rating 10 or higher speed when recording in Protune mode, or when using the 0.5 time Lapse setting. GoPro recommends using brand name memory cards for maximum reliability in high-vibration activities. to insert sD card: to remove sD card:
sYsteM reqUireMents
The HERO3 camera is compatible with Microsoft® XP (Service Pack 2) or later and Mac OS X 10.4.11 or later. WinDoWs Windows XP (Service Pack 2 or later) or Vista 3.2GHz Pentium 4 or faster DirectX 9.0c or later Minimum 1GB of system RAM Video card with minimum 256MB of RAM Minimum 1GB of system RAM Video card with minimum 128MB of RAM mAC Mac OS® X 10.4.11 or later 2.0GHz Intel Core Duo or faster
1. Slide memory card into card slot with label facing front of camera. 2. The card will click into place when fully inserted.
1. Place fingernail against edge of memory card and lightly press further into camera. 2. Card will spring out far enough to be removed.
Pro tiP:
Want to see your footage and stills on the big screen? Plug your HERO3 directly into a TV/HDTV with GoPro’s Micro HDMI cable or USB cable (optional accessories).
Pro tiP:
Use care when handling memory cards. Avoid liquids, dust and debris. As a precaution, turn off the camera before inserting or removing the card. Check manufacturer guidelines regarding use in acceptable temperature ranges.
38
39
transferrinG files to trAnsFer ViDeo AnD Photo FiLes to A ComPuter on A PC: 1. Connect the camera to the computer using included USB cable. 2. Press to turn on the camera. 3. Double click “My Computer” and locate “Removable Disk”. 4. If “Removable Disk” is not showing, close “My Computer” folder and reopen it. The “Removable Disk” icon should appear. 5. Double click “Removable Disk” icon. 6. Double click “DCIM” folder icon. 7. Double click “100GOPRO” icon to view all Photo and Video files. 8. Copy/move files to the computer or external hard drive. on a mac: 1. Connect the camera to Mac using included USB cable. 2. Press to turn on the camera.
PlaYback to VieW ViDeos AnD Photos
Videos and Photos can be viewed on a TV/HDTV or the LCD Touch BacPac™ (optional accessory). PLAYBACK on tV/hDtV to browse Videos and Photos: 1. Plug the camera into a TV/HDTV with a micro hDmi or a miniusB to a Composite Cable (optional accessories). 2. Turn camera on. 3. On your camera press to cycle to . Press .
4. HERO3 displays thumbnail previews of all Videos and Photos on the SD card. Photo sets taken in Continuous Photo, Photo Burst and time Lapse display the first Photo in a series. 5. While in thumbnail preview use to view. to cycle through thumbnails. Press
3. The Mac recognizes the camera as an external hard drive. Double click icon for external drive to access files. 4. Copy/move files to computer or external hard drive. imPortAnt tiP For mAC users: When deleting files from the memory card, empty the trash before removing the memory card or unplugging the camera.
and to navigate backward and forward to see more media 6. Use files on your memory card. 7. Highlight desired file to view and press .
8. Depending on whether you are viewing Videos and Photos, different control options will appear. Use the and buttons to navigate. note: Photo Burst and time Lapse files will display the first Photo in the series. To view all Photos in a series, use to select VieW and press .
40
41
PlaYback
PLAYBACK on LCD touCh BACPAC Playback using the LCD Touc BacPac follows a similar process/procedure as described with a few slight variations. ▶See the LCD Touch BacPac User Manual for more information.
batterY life ChArGinG BAtterY
The battery icon displayed in the camera’s LCD will blink when the battery drops below 10%. If recording is occurring when battery reaches 0%, the camera will save the file and power oFF. to charge the battery: 1. Connect the camera to a computer or USB power supply (such as the GoPro Wall Charger or GoPro Auto Charger). 2. The Red status indicator Light remains on while the battery is charging. 3. The Red status indicator Light will turn oFF when the battery is fully charged. The battery will charge to 80% in one hour and 100% in two hours when using GoPro’s 1000mAh USB-compatible Wall or Auto Charger. Other chargers may charge at only half this rate. No damage will occur to the camera or the battery if used together prior to full charge. Spare batteries and additional charging accessories are available at gopro.com.
42
43
batterY life usinG the CAmerA WhiLe ChArGinG
You can charge the camera’s battery while recording Video or taking Photos. Simply plug the camera into a GoPro-specific auto, wall or phone charger to charge the HERO3 camera while recording Video or Photos. It is best to use GoPro’s 1AMP (1000mAh) Wall or Auto Charger for maximum charging performance while the camera is in use. Performance of non-GoPro chargers cannot be guaranteed.
iMPortant warninG MessaGes miCrosD CArD messAGes no sD sD FuLL sD error No card present. The camera requires a microSD, microSDHC or microSDXC card to record Video or take Photos. Card is full. Delete files or swap card. Camera unable to access card.
remoVinG the BAtterY From the CAmerA
The HERO3 battery is designed to have a tight fit to maximize reliability in highvibration activities. to remove the battery:
FiLe rePAir iCon on the LCD
If you see the File repair icon on the LCD screen, your Video file was corrupted during recording. Press any button and the camera will repair the file.
temPerAture WArninG iCon on the LCD
The temperature Warning icon will appear on the LCD when the camera has become too hot and needs to cool down. Simply let it sit and cool before attempting to use it again. Your camera will not allow itself to overheat—do not worry, no damage has occurred.
1. Remove the battery door by placing your thumb in the indentation in the battery door (on the back of the camera) and sliding it to the left. 2. Allow the door to pop out. Grasp the battery pull-tab and remove from the camera. 44 45
caMera asseMblY
The HERO3 camera housing is waterproof to 197’/60m and is constructed of polycarbonate and stainless steel for ultimate durability. The HERO3 has a new improved latch closure that offers one hand open-and-close functionality and locking.
caMera asseMblY
The HERO3 housing comes with two types of backdoors—Skeleton and Waterproof.
AssemBLinG the CAmerA
skeleton Backdoor to place the hero3 camera into the housing: 1. Place camera in housing. 2. Position the backdoor into place. 3. Lift the latch arm into upright position allowing the hinged arm to hang downward. 4. Hook grooved portion of hinged arm to grooved top of the backdoor. 5. Use one finger to push down the latch arm to snap into place. to remove the hero3 camera from the housing: 1. Grip the housing with left hand. 2. Using right hand, place thumb to left side of arrow and index finger just below latch arm. 3. Pinch fingers together, sliding arrow to the right. 4. Use fingertips to pull upward, allowing latch arm to swing to fully upright position. 5. Lift hinged arm over the housing and remove the HERO3. To close properly, be sure grooved sections of the latch arm and the backdoor are hooked. 46 Pro tiP: The Skeleton Backdoor (non-waterproof) provides better sound quality by allowing more sound to reach the camera’s microphone. It also reduces wind noise at speeds up to 100mph when mounted on helmets, motorcycles, bikes and other fast-moving vehicles. Use this backdoor only when sand, excessive dirt/dust and water damage is not a risk. This backdoor is also recommended for use inside vehicles.
Waterproof Backdoor The Waterproof Backdoor makes the housing waterproof to 197’/60m. Use this door when you need to protect the camera from water and other environmental hazards.
Apply RAIN-X or a similar anti-beading solution to the housing lens to prevent waterspots from forming when using your camera in rain or water. When RAIN-X is not available, periodically licking your lens is a good backup solution. Dunk your camera after licking. Trust us, this works.
47
caMera asseMblY sWAPPinG housinG Doors
Your HERO3 camera housing comes with two types of backdoors—Waterproof and Skeleton (non-waterproof). to change backdoor:
caMera asseMblY PreVentinG WAter DAmAGe to Your CAmerA
The rubber seal that lines the camera housing forms a waterproof barrier that protects your HERO3 in wet and underwater conditions. Keep the camera housing’s rubber seal clean; a single hair or grain of sand can cause a leak. After every use in salt water you will need to rinse the outside of the housing with non-salt water and dry. Not doing this can eventually cause corrosion of the hinge pin and salt buildup in the seal, which can cause failure. To clean the seal, rinse in fresh water and shake dry (drying with a cloth may cause lint to compromise the seal). Re-install the seal into the grooves in the backdoor of the housing. WArninG: Failure to follow these steps each time you use your HERO3 can result in leaks that may damage or destroy your camera. Your warranty does not cover water damage resulting from user error.
1. Open the backdoor of the housing so that it is hanging downwards. 2. Pull downwards on the backdoor until it snaps free from the hinge. 3. Line up replacement backdoor into the hinge opening. 4. Push upwards on the backdoor until it clicks into place.
48
49
caMera asseMblY AttAChinG Your CAmerA to mounts
To attach your HERO3 camera to a mount, you will need an attachment buckle, thumb screw or other hardware depending on the mount you are using. For more information on mounts, visit gopro.com/support. AttAChinG ADhesiVe mounts Pro tiPs:
caMera asseMblY
Apply to clean surface only. Wax, oil, dirt or other debris will reduce adhesion, which can result in a weak bond and risk of losing camera should connection fail. Attach mount in room temperature conditions. Mount’s adhesive will not bond properly if applied in cold or damp environments to cold or damp surfaces, or if the surface is not room temperature. Adhesive mounts should only be mounted to smooth surfaces; porous or textured surfaces will not enable a proper bond. When applying mount, firmly press into place and ensure full contact over entire surface. For best results, attach the mount a minimum of 24 hours prior to use. ▶See gopro.com/support for more information on mounts. Locking Plug Using the HERO3 in high impact sports such as surfing or skiing where significant impact may occur? Use the special locking plug which securely locks the attachment buckle fingers into place--helping prevent accidental housing release from the mount. The circular ring fits over the thumbscrew and acts as a leash to prevent dropping or losing the locking plug.
Attachment Buckle
thumb screw
Waterhousing
Complete unit
usinG CurVeD or FLAt ADhesiVe mounts
The curved and flat adhesive mounts make it easy to attach the camera to curved and flat surfaces of helmets, vehicles and gear. With the attachment buckle the assembled camera housing can be clicked on/oFF the secured adhesive mounts.
Flat Adhesive mount
Curved Adhesive mount
50
51
cUstoMer sUPPort
GoPro is dedicated to providing the best possible service. To reach the GoPro Customer Support Team, visit gopro.com/support.
Learn about more GoPro products at: gopro.com
52
130-02454-000 REVA
Please Recycle.
53 