Satellite® L670 Series
User’s Guide
If you need assistance:
❖

Toshiba’s Support Web site pcsupport.toshiba.com ❖

Toshiba Customer Support Center
Calling within the United States (800) 457-7777
Calling from outside the United States (949) 859-4273

For more information, see “If Something Goes Wrong” on page 163 in this guide.

GMAD00245010
03/10

2
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Model: Satellite® L670 Series
Recordable and/or ReWritable Drive(s) and
Associated Software Warranty
The computer system you purchased may include Recordable and/or
ReWritable optical disc drive(s) and associated software, among the most advanced data storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed or provided electronically. If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS,
INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT
WARRANT THAT OPERATION OF THE PRODUCT WILL BE
UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,
ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO
RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS,
PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR
REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING
FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY THEREOF.

Protection of Stored Data
For your important data, please make periodic back-up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR
LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF
THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE
DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE
LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER
DAMAGE RESULTING THEREFROM. WHEN COPYING OR
TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM
WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR
TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE
FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

5.375 x 8.375 ver 2.3

3
Critical Applications
The computer you have purchased is not designed for any “critical applications.”
“Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.
ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS
DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE
OF THE COMPUTER PRODUCTS IN ANY CRITICAL
APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A
CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME
FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice “Declaration of Conformity Information”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

❖

Reorient or relocate the receiving antenna.

❖

Increase the separation between the equipment and receiver.

❖

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

❖

Consult the dealer or an experienced radio/TV technician for help.

NOTE

Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception.
Shielded cables must be used between the external devices and the computer's ports. Changes or modifications made to this equipment not expressly approved by
Toshiba or parties authorized by Toshiba could void the user's authority to operate the equipment.

5.375 x 8.375 ver 2.3

4
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

❖

This device may not cause harmful interference.

❖

This device must accept any interference received, including interference that may cause undesired operation.

Contact either:

❖

Toshiba’s Support Web site at pcsupport.toshiba.com.

❖

Or call the Toshiba Customer Support Center:
Within the United States at (800) 457-7777
Outside the United States at (949) 859-4273

Industry Canada Requirement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé à la norme NMB-003 du
Canada.

FCC requirements
The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems and is only applicable if your computer has a modem.
This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, the information must be provided to the telephone company.
The modem connects to the telephone line by means of a standard jack called the
USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC part 68 rules and requirements adopted by the ACTA. It is designed to be connected to a compatible modular jack that is also compliant.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by the ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

5.375 x 8.375 ver 2.3

5
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. Telephone Company Procedures
The goal of the telephone company is to provide you with the best service it can.
In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations or procedures. If these changes might affect your service or the operation of your equipment, the telephone company will give you notice, in writing, to allow you to make any changes necessary to maintain uninterrupted service.

If Problems Arise
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advanced notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
If trouble is experienced with this equipment, for repair or standard limited warranty information, please contact Toshiba Corporation, Toshiba America
Information Systems, Inc. or an authorized representative of Toshiba, or the
Toshiba Customer Support Center within the United States at (800) 457-7777 or
Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

Disconnection
If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change.

Fax Branding
The following information is only applicable if your computer has the capability to send and receive fax transmissions.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including Fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

5.375 x 8.375 ver 2.3

6
In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer.

Alarm Equipment
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Instructions for IC CS-03 Certified Equipment
1

NOTICE: The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

2

The user manual of analog equipment must contain the equipment’s
Ringer Equivalence Number (REN) and an explanation notice similar to the following:
The Ringer Equivalence Number (REN) of this device can be found on the label affixed to your computer.
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

5.375 x 8.375 ver 2.3

7
3

The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C.

Wireless Interoperability
The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence
Spread Spectrum (DSSS) radio technology, and is compliant to:

❖

The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of Electrical and Electronics Engineers.

❖

The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi Alliance.
The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.
Bluetooth® and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and
Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off your
Bluetooth or Wireless LAN device.
Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

Radio Frequency Interference Requirements
This device is restricted to indoor use due to its operation in the 5.15 GHz to
5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 GHz to 5.35
GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

NOTE

The above caution applies to products that operate with an 802.11a radio device. 5.375 x 8.375 ver 2.3

8
Wireless LAN and Your Health
Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless
LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

❖

Using the Wireless LAN equipment on board airplanes, or

❖

In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment.
Exposure to Radio Frequency Radiation
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the
TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Regulatory Information
The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.

5.375 x 8.375 ver 2.3

9
Canada – Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be co-located with any other transmitter that has not been tested with this device. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
L’ utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même s’il est susceptible de compromettre son fonctionnement.
The term “IC” before the equipment certification number only signifies that the
Industry Canada technical specifications were met.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence.
This device is restricted to indoor use due to its operation in the 5.15 GHz to
5.25 GHz frequency range. Industry Canada requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 GHz to 5.35
GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

NOTE

The above caution applies to products that operate with an 802.11a radio device. 5.375 x 8.375 ver 2.3

10
EU Declaration of Conformity
TOSHIBA declares that this product conforms to the following Standards:
Supplementary *The product complies with the
Information:
requirements of the Low Voltage
Directive 73/23/EEC, the EMC Directive
89/336/EEC and/or the R&TTE Directive
1999/5/EC.
This product is carrying the CE-Mark in accordance with the related European
Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH,
Hammfelddamm 8, 41460 Neuss, Germany.

The European Union WEEE (Waste from Electrical and
Electronic Equipment) Directive Information
The European Union WEEE (Waste from Electrical and Electronic Equipment)
Directive is intended to protect the quality of the environment and human health through the responsible use of natural resources and the adoption of waste management strategies that focus on recycling and reuse. This Directive requires producers of electrical and electronic products put on the market in European
Union (EU) member countries after August 2005 to mark such products with a crossed-out wheeled bin with a black bar symbol. If the product’s battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled bin symbol on the battery.

Pb, Hg, Cd

In the European Union, these symbols indicate that when the last end user wishes to discard this product, it must be sent to appropriate facilities for recovery and recycling. This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States.
Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Please contact your local government for applicable laws and regulations governing the disposal of this product. For information on how to trade-in or recycle your product, visit www.reuse.toshiba.com.

5.375 x 8.375 ver 2.3

11
VCCI Class B Information

Modem Warning Notice
This information is only applicable if your computer has a modem.

Conformity Statement
The equipment has been approved to [Commission Decision “CTR21”] for panEuropean single terminal connection to the Public Switched Telephone Network
(PSTN).
However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first instance. Taiwan
Article 14

Article 17

Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design.
Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued. Operation of such products can be resumed only when they are modified and can no longer cause interference.
The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

5.375 x 8.375 ver 2.3

12
Using this Equipment in Japan
In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station).
1. Sticker
Please put the following sticker on devices incorporating this product.
The frequency bandwidth of this equipment may operate within the same range as industrial devices, scientific devices, medical devices, microwave ovens, licensed radio stations and non-licensed specified low-power radio stations for mobile object identification systems (RFID) used in factory product lines (Other Radio Stations).
1. Before using this equipment, ensure that it does not interfere with any of the equipment listed above.
2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions.
3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.

2. Indication
The indication shown below appears on this equipment.
(1)

(2) (3)

2.4DSOF4
(4)

1
2

2.4: This equipment uses a frequency of 2.4 GHz.
DS: This equipment uses DS-SS modulation.
OF: This equipment uses OFDM modulation.

3
4

The interference range of this equipment is less than 40m.
This equipment uses a frequency bandwidth from
2,400 MHz to 2,483.5 MHz.
It is possible to avoid the band of mobile object identification systems.

5.375 x 8.375 ver 2.3

13
The indication shown below appears on this equipment.
(1)

(2) (3)

2.4FH1
(4)

1
2
3
4

2.4: This equipment uses a frequency of 2.4 GHz.
FH: This equipment uses FH-SS modulation.
The interference range of this equipment is less than 10m.
This equipment uses a frequency bandwidth from 2,400 MHz to
2,483.5 MHz.

3. TOSHIBA Direct PC
Monday – Friday: 10:00 – 17:00
Toll Free Tel: 0120-15-1048
Direct Dial: 03-3457-4850
Fax: 03-3457-4868

Device Authorization
This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications
Business Law of Japan.
The name of the radio equipment: refer to the equipment label provided on the computer
Approved by both the JAPAN APPROVALS INSTITUTE FOR
TELECOMMUNICATIONS EQUIPMENT and the TELECOM
ENGINEERING CENTER
The following restrictions apply:

❖
❖
❖

Do not disassemble or modify the device.
Do not install the embedded wireless module into other device.
5.17 GHz to 5.23 GHz for indoor use only.

5.375 x 8.375 ver 2.3

14
Radio Approvals for Wireless Devices
NOTE

The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models.

Approved Countries/Regions for the Intel® Wireless Wi-Fi®
Link 5100/5300 Series
This equipment is approved to the radio standard by the countries/regions in the following table.
Do not use this equipment except in the countries/regions in the following table. Andorra

Argentina CNC:

Austria
Belgium
Brazil
Cambodia
Chile
Costa Rica

533AN_HMW: “CNC C-6367”
533AN_MMW: “CNC C-6366”
512AN_HMW: “CNC C-6373”
512AN_MMW: “CNC C-6374”
Azerbaijan
Bermuda
Bulgaria
Canada
China
Croatia

Cyprus
Dominican Republic
Egypt
Finland
French Polynesia
Gibraltar
Guam
Honduras
Iceland
Ireland
Japan
Kuwait
Liechtenstein

Czech Republic
Ecuador
Estonia
France
Germany
Greece
Guatemala
Hong Kong
India
Israel
Jordan
Latvia
Lithuania

5.375 x 8.375 ver 2.3

Australia

Bahrain
Bosnia
Caicos Islands
Cayman Islands
Colombia
Curacao, Netherlands
Antilles
Denmark
El Salvador
Falkland Islands
French Guinea
Ghana
Guadeloupe
Herzegovina
Hungary
Indonesia
Italy
Kenya
Lebanon
Luxemburg

15
Malawi
Martinique
Monaco
Morocco
New Zealand
Oman
Paraguay
Poland
Qatar
Russia
San Marino
Singapore
South Africa
Sri Lanka
Tahiti
Turk Islands

Malaysia
Mayotte
Montenegro
Netherlands
Nicaragua
Pakistan
Peru
Portugal
Réunion
Saint Martin
Saudi Arabia
Slovakia
South Korea
Sweden
Taiwan
Ukraine

United Kingdom
Vatican
Virgin Islands

Uruguay
Venezuela
Zimbabwe

Malta
Mexico
Montserrat
New Caledonia
Norway
Panama
Philippines
Puerto Rico
Romania
Saipan
Serbia
Slovenia
Spain
Switzerland
Turkey
UAE
(United Arab Emirates)
USA
Vietnam

Approved Countries/Regions for the Intel® Wireless Wi-Fi®
Link 622ANHMW and 633ANHMW Series
This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.
Canada

USA

5.375 x 8.375 ver 2.3

16
Approved Countries/Regions for the Atheros® Wireless Wi-Fi®
Link AR5B95 Series
This equipment is approved to the radio standard by the countries/regions in the following table.
Do not use this equipment except in the countries/regions in the following table. Albania

Argentina CNC:

Austria
Bangladesh
Bosnia
Bulgaria
Chile
Croatia
Denmark
Egypt
Finland
Ghana
Herzegovina
Hungary
Indonesia
Italy
Jordan
Kuwait
Lebanon
Lithuania
Malaysia
Monaco
Nambia
New Zealand
Norway
Panama
Peru
Portugal
Romania
Senegal
Slovak Republic
South Korea
Sweden
Thailand

693 GI/2007
3655 GI/2007
Azerbaijan
Belgium
Brazil
Cambodia
China
Cyprus
Dominican Republic
El Salvador
France
Greece
Honduras
Iceland
Iraq
Jamaica
Kazakhstan
Kyrgyzstan
Lesotho
Luxembourg
Malta
Montenegro
Nepal
Nicaragua
Oman
Papua New Guinea
Philippines
Puerto Rico
Russia
Serbia
Slovenia
Spain
Switzerland
Turkey

5.375 x 8.375 ver 2.3

Australia

Bahrain
Bolivia
Brunei
Canada
Colombia
Czech Republic
Ecuador
Estonia
Germany
Guatemala
Hong Kong
India
Ireland
Japan
Kenya
Latvia
Liechtenstein
Macedonia
Mexico
Mozambique
Netherlands
Nigeria
Pakistan
Paraguay
Poland
Qatar
Saudi Arabia
Singapore
South Africa
Sri Lanka
Taiwan
UAE (United Arab
Emirates)

17
Ukraine
USA
Yemen

United Kingdom
Venezuela
Zimbabwe

Uruguay
Vietnam

Europe - Restrictions for use of 2.4 GHz Frequencies in
European Community Countries
België/
Belgique:

Deutschland:

France:

Italia:

Nederland:

For private usage outside buildings across public grounds over less than
300m no special registration with IBPT/BIPT is required. Registration to
IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT.
Voor privé-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig.
Voor registratie of licentie kunt u contact opnemen met BIPT.
Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m un enregistrement auprès de l’IBPT est requise. Pour les enregistrements et licences, veuillez contacter l’IBPT.
License required for outdoor installations. Check with reseller for procedure to follow.
Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigungspflichtig. Bitte mit Händler die Vorgehensweise abstimmen. Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454
MHz respectively) may be used outdoors in France. Please contact
A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.
Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz respectivement) doivent être utilisés endroits extérieur en France. Vous pouvez contacter l’Autorité de Régulation des Télécommunications
(http://www.art-telecom.fr) pour la procédure à suivre.
License required for indoor use. Use with outdoor installations not allowed. È necessaria la concessione ministeriale anche per l’uso interno.
Verificare con i rivenditori la procedura da seguire.
License required for outdoor installations. Check with reseller for procedure to follow.
Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste procedure.

5.375 x 8.375 ver 2.3

18
Europe - Restrictions for Use of 5 GHz Frequencies in
European Community Countries
European Community
Countries

Austria
Belgium, France,
Switzerland/Liechtenstein
Denmark, Finland,
Germany, Greece,
Ireland, Italy,
Luxembourg,
Netherlands, Norway,
Portugal, Sweden, UK
Iceland, Spain

5150-5250 MHz 5250-5350 MHz
Channels: 36, 40, 44,
48

5470-5725 MHz

Channels: 52, 56, 60, Channels: 100, 104, 108, 112,
64
116, 120, 124, 128, 132, 136, 140

Indoor Only
O
O

Indoor Only x O

Indoor/Outdoor x x

O

O

O

O

O

O

O: allowed x: forbidden

❖

To remain in conformance with European spectrum usage laws for Wireless
LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply.
The user should use the wireless LAN utility to check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network.

❖

The 5 GHz Turbo mode feature is not allowed for operation in any
European Community country.

❖

This device must not be operated in ad-hoc mode using channels in the
5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access
Point.

❖

This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption of operation of this device. The Access Point’s radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.

5.375 x 8.375 ver 2.3

19
Approved Countries/Regions for the Realtek® RTL8192E
This equipment is approved to the radio standard by the countries/regions in the following table.
Do not use this equipment except in the countries/regions in the following table.
Albania
Austria
Bangladesh
Bosnia
Cambodia
China
Croatia
Denmark
Egypt
Finland
Ghana
Honduras
Iceland
Ireland
Japan
Kenya
Latvia
Liechtenstein
Macedonia
Mexico
Mozambique
Nicaragua
Pakistan
Paraguay
Poland
Qatar
Serbia
Slovenia
Spain
Switzerland
Trinidad

Argentina
Azerbaijan
Belgium
Brazil
Canada
Colombia
Cyprus
Dominican Republic
El Salvador
France
Greece
Hong Kong
India
Israel
Jordan
Kuwait
Lebanon
Lithuania
Malaysia
Monaco
Netherlands
Norway
Panama
Peru
Portugal
Romania
Singapore
South Africa
Sri Lanka
Taiwan
Turkey

United Kingdom
Venezuela

Uruguay
Vietnam

5.375 x 8.375 ver 2.3

Australia
Bahrain
Bolivia
Bulgaria
Chile
Costa Rica
Czech Republic
Ecuador
Estonia
Germany
Herzegovina
Hungary
Indonesia
Italy
Kazakhstan
Kyrgyzstan
Lesotho
Luxembourg
Malta
Morocco
New Zealand
Oman
Papua New Guinea
Philippines
Puerto Rico
Saudi Arabia
Slovak Republic
South Korea
Sweden
Thailand
UAE (United Arab
Emirates)
USA
Zimbabwe

20
Approved Countries/Regions for the Realtek® RTL8191SE
This equipment is approved to the radio standard by the countries/regions in the following table.
Do not use this equipment except in the countries/regions in the following table.
Albania
Austria
Bangladesh
Bosnia
Cambodia
China
Croatia
Denmark
Egypt
Finland
Germany
Hong Kong
India
Israel
Japan
Kenya
Latvia
Lithuania
Malaysia
Monaco
Netherlands Antilles
Norway
Panama
Peru
Portugal
Romania
Serbia
Slovenia
Spain
Switzerland
Trinidad

Argentina
Azerbaijan
Belgium
Brazil
Canada
Colombia
Cyprus
Dominican Republic
El Salvador
France
Greece
Hungary
Indonesia
Italy
Jordan
Kuwait
Lebanon
Luxembourg
Malta
Morocco
Netherlands
Oman
Papua New Guinea
Philippines
Puerto Rico
Russia
Singapore
South Africa
Sri Lanka
Taiwan
Tunisia

5.375 x 8.375 ver 2.3

Australia
Bahrain
Bolivia
Bulgaria
Chile
Costa Rica
Czech Republic
Ecuador
Estonia
Ghana
Herzegovina
Iceland
Ireland
Jamaica
Kazakhstan
Kyrgyzstan
Liechtenstein
Macedonia
Mexico
Mozambique
New Zealand
Pakistan
Paraguay
Poland
Qatar
Saudi Arabia
Slovak Republic
South Korea
Sweden
Thailand
Turkey

21
UAE (United Arab
Emirates)
Uruguay
Vietnam

Ukraine

United Kingdom

USA
Zimbabwe

Venezuela

Approved Countries/Regions for the Realtek® RTL8187B
This equipment is approved to the radio standard by the countries/regions in the following table.
Do not use this equipment except in the countries/regions in the following table. Albania
Australia
Bahrain
Bolivia
Brunei
Canada
Colombia
Cyprus
Dominican Republic
El Salvador
France
Greece
Honduras
Iceland
Ireland
Japan - Jate
Kazakhstan
Kuwait
Lesotho
Luxembourg
Malta
Morocco
New Zealand
Norway
Panama
Peru
Portugal
Romania
Senegal
Slovak Republic
South Korea

Algeria
Austria
Bangladesh
Bosnia
Bulgaria
Chile
Costa Rica
Czech Republic
Ecuador
Estonia
Germany
Guatemala
Hong Kong
India
Israel
Japan - Teleco
Kenya
Latvia
Liechtenstein
Macedonia
Mexico
Mozambique
Nicaragua
Oman
Papua New Guinea
Philippines
Puerto Rico
Russia
Serbia and Montenegro
Slovenia
Spain

5.375 x 8.375 ver 2.3

Argentina
Azerbaijan
Belgium
Brazil
Cambodia
China
Croatia
Denmark
Egypt
Finland
Ghana
Herzegovina
Hungary
Indonesia
Italy
Jordan
Kyrgyzstan
Lebanon
Lithuania
Malaysia
Monaco
Netherlands
Nigeria
Pakistan
Paraguay
Poland
Qatar
Saudi Arabia
Singapore
South Africa
Sri Lanka

22
Sweden
Thailand
UAE (United Arab
Emirates)
USA
Yemen

Switzerland
Turkey
United Kingdom

Taiwan
Ukraine
Uruguay

Venezuela
Zimbabwe

Vietnam

Bluetooth® Wireless Technology Interoperability
Bluetooth® Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping
Spread Spectrum (FHSS) radio technology, and is compliant to:

❖
❖

Bluetooth Specification as defined and approved by The Bluetooth Special
Interest Group.
Logo certification with Bluetooth wireless technology as defined by The
Bluetooth Special Interest Group.
Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth products with all computers and/or equipment using Bluetooth wireless technology other than TOSHIBA portable computers.
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
When you use Bluetooth cards from TOSHIBA close to 2.4 GHz Wireless
LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth cards from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards or more) or stop transmitting from your computer. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/ computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the
United States for more information.
Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and Wireless
LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either one of your
Bluetooth or Wireless LAN. Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

5.375 x 8.375 ver 2.3

23
Approved Countries/Regions for use (Bluetooth® wireless technology) Bluetooth® Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table.
Do not use this equipment except in the countries/regions in the following table. Argentina
Belgium
Chile
Czech Republic
Estonia
Germany
Hungary
Italy
Korea
Lebanon
Luxembourg
New Zealand
Peru
Portugal
Slovenia
Switzerland
Uruguay

Australia
Bulgaria
China
Denmark
Finland
Greece
Iceland
Japan
Kuwait
Liechtenstein
Malta
Norway
Philippines
Singapore
Spain
Thailand
USA

5.375 x 8.375 ver 2.3

Austria
Canada
Cyprus
Egypt
France
Hong Kong
Ireland
Jordan
Latvia
Lithuania
Netherlands
Oman
Poland
Slovakia
Sweden
UK
Venezuela

24
Bluetooth® Wireless Technology and Your Health
The products with Bluetooth® wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is much less than the electromagnetic energy emitted by wireless devices such as mobile phones.
Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations,
TOSHIBA believes Bluetooth wireless technology is safe for use by consumers.
These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

❖

Using the equipment with Bluetooth wireless technology on board airplanes, or

❖

In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the device with Bluetooth wireless technology prior to turning on the equipment.
Exposure to Radio Frequency Radiation
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.

5.375 x 8.375 ver 2.3

25
Regulatory statements
This product complies with any mandatory product specification in any country/ region where the product is sold. In addition, the product complies with the following: European Union (EU) and EFTA
This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly.

Canada — Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.

Taiwan
Article 14

Article 17

Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design.
Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued. Operation of such products can be resumed only when they are modified and can no longer cause interference.
The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

5.375 x 8.375 ver 2.3

26
Optical Disc Drive Safety Instructions
This appliance contains a laser system and is classified as a CLASS 1
LASER PRODUCT. To use this model properly, read the user’s guide carefully and keep it for your future reference.
Never attempt to disassemble, adjust or repair an optical disc drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized
Toshiba service provider, if any repair or adjustment is required.

Location of the Required Label
(Sample shown below. Location of the label and manufacturing information may vary.) Copyright
This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
©2010 by Toshiba America Information Systems, Inc. All rights reserved.

5.375 x 8.375 ver 2.3

27
Export Administration Regulation
This document contains technical data that may be controlled under the U.S.
Export Administration Regulations, and may be subject to the approval of the
U.S. Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the U.S. Export Administration Regulations is prohibited.

Notice
The information contained in this manual, including but not limited to any product specifications, is subject to change without notice.
TOSHIBA CORPORATION AND TOSHIBA AMERICA
INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO
WARRANTY WITH REGARD TO THIS MANUAL OR ANY
OTHER INFORMATION CONTAINED HEREIN AND HEREBY
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
PURPOSE WITH REGARD TO ANY OF THE FOREGOING.
TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES
INCURRED DIRECTLY OR INDIRECTLY FROM ANY
TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS
CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN
THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL
TOSHIBA BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,
WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,
ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL
OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE
USE THEREOF.

5.375 x 8.375 ver 2.3

28
Trademarks
Satellite and eco Utility are either registered trademarks or trademarks of Toshiba
America Information Systems, Inc. and/or Toshiba Corporation.
Adobe and Photoshop are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Atheros is a registered trademark of Atheros Communications, Inc.
Blu-ray Disc is a trademark of the BD Association.
Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Memory Stick, Memory Stick PRO, Memory Stick PRO Duo, and Memory
Stick Duo are trademarks or registered trademarks of Sony Corporation.
Microsoft, Outlook, Windows, and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
MultiMediaCard and MMC are registered trademarks of MultiMediaCard
Association.
Secure Digital and SD are trademarks of SD Card Association.
TouchPad is a trademark of Synaptics, Inc.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
All other brand and product names are trademarks or registered trademarks of their respective companies.

Computer Disposal Information
The LCD display lamp in this product may contain mercury. Disposal of this product may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the
Electronic Industries Alliance at www.eiae.org.
As part of Toshiba’s commitment to preserving the environment, Toshiba supports various trade-in and recycling programs. For details, please visit www.laptops.toshiba.com/green. 5.375 x 8.375 ver 2.3

Contents
Introduction................................................................................ 36
This guide ...............................................................38
Safety icons ............................................................39
Other icons used...............................................39
Your computer’s features and specifications ..............................................40
Other documentation ..............................................40
Service options .......................................................40

Chapter 1: Getting Started......................................................... 41
Selecting a place to work ........................................41
Setting up a work environment .........................41
Keeping yourself comfortable ...........................42
Precautions.......................................................42
Important information on your computer’s cooling fan ..................................................44
Setting up your computer .......................................44
Connecting to a power source ................................45
Charging the main battery.......................................47

29

5.375 x 8.375 ver 2.3

30

Contents

Using the computer for the first time ......................48
Opening the display panel .................................48
Turning on the power .......................................49
Setting up your software...................................49
Registering your computer with Toshiba ................50
Adding optional external devices.............................50
Adding memory (optional) ......................................51
Installing a memory module .............................51
Removing a memory module............................57
Checking total memory .....................................60
Recovering the Internal Storage Drive ....................60
Recovering to out-of-box state
(recommended recovery method)...............62
Recovering to a custom size partition ...............64
Recovering without changing the internal storage drive partitions ...............................67
Creating recovery DVDs/media .........................69
Restoring from recovery DVDs/media...............72
Erasing the Internal Storage Drive ..........................74
Checking the internal storage drive operating status ................................................................75
Installing drivers and applications.....................76
Using the TouchPad™.............................................76
Adjusting TouchPad™ settings .........................79
Disabling or enabling the TouchPad™ ..............80
Using external display devices ................................80
Selecting video cables.......................................81
Connecting an HDMI™-compatible television or external display device............81
Connecting an external monitor or projector.....81
Directing the display output when you turn on the computer .........................................82
Adjusting the quality of the external display......83
Using an external keyboard.....................................83
Using a mouse ........................................................83

5.375 x 8.375 ver 2.3

Contents

31

Connecting a printer ...............................................83
Setting up a printer ...........................................84
Turning off the computer ........................................85
Options for turning off the computer ................85
Using the Shut down command........................87
Using and configuring Hibernation mode .........90
Using and configuring Sleep mode ...................92
Closing the display panel ..................................95
Customizing your computer’s settings....................95
Caring for your computer........................................95
Cleaning the computer ......................................95
Moving the computer........................................96
Using a computer lock ......................................96

Chapter 2: Learning the Basics................................................. 97
Computing tips .......................................................97
Using the keyboard .................................................98
Character keys .................................................99
Ctrl, Fn, and Alt keys .........................................99
Function keys....................................................99
Special Windows® keys .................................100
Starting a program................................................100
Starting a program from the Start menu.........101
Starting a program from Windows®
Explorer ....................................................101
Starting a program using the Search programs and files field ............................102
Saving your work ..................................................103
Printing your work ................................................104
Backing up your work ...........................................105
Restoring your work .......................................106
Using the optical disc drive...................................106
Viewing Blu-ray Disc™ movies .......................107
Optical disc drive components........................108
Inserting an optical disc .................................109

5.375 x 8.375 ver 2.3

32

Contents

Playing an audio CD........................................111
Playing optical media ......................................111
Recording optical media .................................111
Removing a disc with the computer on...........112
Removing a disc with the computer off ..........112
Caring for optical discs ..................................113
Toshiba’s online resources ...................................113

Chapter 3: Mobile Computing.................................................114
Toshiba’s energy-saver design..............................114
Running the computer on battery power ..............114
Battery Notice .................................................115
Power management ........................................116
Using additional batteries ...............................116
Charging batteries.................................................116
Charging the main battery...............................117
Charging the RTC battery................................117
Monitoring main battery power.............................118
Determining remaining battery power.............119
What to do when the main battery runs low ............................................................120
Setting battery notifications ............................120
Conserving battery power ..............................121
Power Plans....................................................122
Using a hot key to set the Power Plan.............123
Using the TOSHIBA eco power plan......................124
Changing the main battery ....................................124
Removing the battery from the computer .......125
Inserting a charged battery .............................126
Taking care of your battery ...................................127
Safety precautions ..........................................127
Maintaining your battery .................................128
Disposing of used batteries ..................................129
Traveling tips ........................................................130

5.375 x 8.375 ver 2.3

Contents

33

Chapter 4: Exploring Your Computer’s Features...................131
Exploring the desktop ...........................................131
Finding your way around the desktop .............132
Setting up for communications.............................134
Connecting your computer to a network .........135
Connecting a modem to a telephone line ........136
Exploring audio features .......................................137
Recording sounds...........................................137
Using external speakers or headphones..........138
Using the Web Camera .........................................138
Using the Memory card reader..............................139
Inserting memory media.................................140
Removing memory media...............................140
Using the eSATA/USB combo port........................141

Chapter 5: Utilities....................................................................142
TOSHIBA Assist ....................................................143
Connect...........................................................144
Secure.............................................................145
Protect & Fix ...................................................146
Optimize..........................................................147
TOSHIBA Application Installer...............................148
Setting passwords ................................................149
Using an instant password..............................149
Using a supervisor password..........................150
Using a user password ...................................151
Deleting a user password................................152
TOSHIBA Face Recognition Utility.........................153
TOSHIBA PC Diagnostic Tool Utility......................154
Mouse Utility ........................................................155
TOSHIBA Hardware Setup.....................................156
TOSHIBA Zooming Utility......................................158
TOSHIBA Accessibility ..........................................159
TOSHIBA eco Utility™ ...........................................160

5.375 x 8.375 ver 2.3

34

Contents

TOSHIBA Service Station ......................................161
TOSHIBA PC Health Monitor .................................161

Chapter 6: If Something Goes Wrong....................................163
Problems that are easy to fix ................................163
Problems when you turn on the computer............164
The Windows® operating system is not working...........................................................166 Using Startup options to fix problems ............167
Internet problems ...........................................168
The Windows® operating system can help you ....................................................168
Fixing a problem with Device Manager .................169
Checking device properties .............................169
Memory problems ................................................170
Power and the batteries ........................................170
Keyboard problems...............................................172
Display problems ..................................................172
Disk or storage drive problems.............................174
Error-checking ................................................174
Optical disc drive problems...................................175
Sound system problems .......................................178
Modem problems..................................................178
Wireless networking problems..............................179
DVD and BD operating problems ..........................180
Develop good computing habits ...........................181
Data and system configuration backup in the Windows® operating system...............182
If you need further assistance...............................186
Before you contact Toshiba ............................186
Contacting Toshiba .........................................187
Other Toshiba Internet Web sites..........................188
Toshiba’s worldwide offices..................................188

5.375 x 8.375 ver 2.3

Contents

35

Appendix A: Hot Keys/TOSHIBA Cards ................................. 190
Hot Key Cards .......................................................190
Using the Hot Key Cards .................................191
Application Cards..................................................192
Using the Application Cards............................193
Card Case........................................................193
Hot key functions ..................................................194
Volume Mute ..................................................194
Lock (Instant security) ....................................195
Power plan .....................................................196
Sleep mode .....................................................197
Hibernation mode ...........................................198
Output (Display switch) .................................199
Display brightness ..........................................200
Disabling or enabling wireless devices............201
Disabling or enabling the TouchPad™ ............202
Zoom (Display resolution) ..............................203
Keyboard hot key functions ...........................204

Appendix B: Power Cord/Cable Connectors.......................... 205
Glossary.................................................................................... 206
Index.......................................................................................... 221

5.375 x 8.375 ver 2.3

Introduction
Welcome to the world of powerful, portable, multimedia computing. With your Toshiba computer, your work and entertainment can accompany you wherever you go.
Your computer model may be ENERGY STAR® qualified. If the model you purchased is qualified, it is labeled with the ENERGY
STAR® logo on the computer and the following information applies. Toshiba is a partner in the Environmental Protection Agency’s
(EPA) ENERGY STAR® Program and has designed this computer to meet the latest ENERGY STAR® guidelines for energy efficiency. Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both
AC power and battery modes.
To conserve energy, your computer is set to enter the low-power
Sleep mode which shuts down the system and display within 15 minutes of inactivity in AC power mode. We recommend that you leave this and other energy saving features active, so that your computer will operate at its maximum energy efficiency. You can wake the computer from Sleep mode by pressing the power button.
See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to conserve computer energy.

36

Introduction

37

According to the EPA, a computer meeting the new ENERGY
STAR® specifications will use between 30% and 60% less energy depending on how it is used. If all U.S. households and businesses replaced old computers with new ENERGY STAR® qualified models, we would save more than $2 billion in energy costs each year and avoid greenhouse gas emissions equivalent to nearly 3 million cars.
If every computer purchased by businesses this year met the new
ENERGY STAR® requirements, businesses would save more than
$1.6 billion over the lifetime of those models. That is equivalent to lighting 840 million square feet of U.S. commercial building space each year.
During 2008, Americans, with the help of ENERGY STAR®, saved about $19 billion dollars on their utility bills and avoided greenhouse gas emissions equivalent to those from 29 million vehicles. Visit http://www.energystar.gov or http://www.energystar.gov/powermanagement for more information regarding the ENERGY STAR® Program.
NOTE

This computer is compatible with European Union Directive
2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE.
Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting
RoHS requirements by conducting component sampling inspections during the product design approval process.

NOTE

Certain Microsoft® software product(s) included with this computer may use technological measures for copy protection. IN SUCH
EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO
NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION
PROCEDURES. Product activation procedures and Microsoft’s privacy policy will be detailed during initial launch of the product, or upon certain reinstallations of the software product(s) or reconfigurations of the computer, and may be completed by Internet or telephone (toll charges may apply).
Some software may differ from its retail version (if available), and may not include user manuals or all program functionality.

5.375 x 8.375 ver 2.3

38

Introduction
This guide

NOTE

The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, please visit Toshiba’s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice. For the most up-to-date product information about your computer, or to stay current with the various computer software or hardware options, visit
Toshiba’s Web site at pcsupport.toshiba.com.

This guide
This guide introduces the computer's features as well as some basic procedures needed to perform tasks in Windows® 7. You can:
❖

Read the entire guide from beginning to end.

❖

Skim through and stop when a topic interests you.

❖

Use the table of contents and the index to find specific information. 5.375 x 8.375 ver 2.3

Introduction
Safety icons

39

Safety icons
This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows:
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE

Provides important information.

Other icons used
Additional icons highlight other helpful or educational information:
TECHNICAL NOTE: This icon indicates technical information about the computer.

HINT: This icon indicates helpful hints and tips.

DEFINITION: This icon indicates the definition of a term used in the text. 5.375 x 8.375 ver 2.3

40

Introduction
Other documentation

Your computer’s features and specifications
Certain computer chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis, unless you have selected all those features.
This information applies to all the features and icons described in this guide.
Below are examples of some of the many possible icons used on your computer:

(Sample Illustration) System icons

Other documentation
Your computer comes with the following documentation:
❖

An electronic version of the user’s guide (this document)

❖

A Quick Start Card

❖

A Resource Guide

❖

It may also contain guides for other programs that may come with your system.

For accessory information, visit Toshiba’s Web site at accessories.toshiba.com. Service options
Toshiba offers a full line of optional service programs to complement its standard limited warranty. Toshiba’s standard limited warranty, extended warranty, and service upgrade terms and conditions are available at warranty.toshiba.com.
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com.
If you have a problem or need to contact Toshiba, see “If Something
Goes Wrong” on page 163.

5.375 x 8.375 ver 2.3

Chapter 1

Getting Started
This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer.
The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important safety information. Please read the safety instructions carefully and make sure you fully understand the instructions before you attempt to use your computer in order to avoid potential hazards that could cause bodily injury, property damage, or damage the computer.

Selecting a place to work
Your computer is portable and designed to be used in a variety of circumstances and locations.

Setting up a work environment
Place the computer on a hard flat surface that is large enough for the computer and any other items you are using, such as a printer.
Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they may overheat. Read the “Provide adequate ventilation” section in the “Instruction
Manual for Safety and Comfort” that is shipped with your computer. 41

42

Getting Started

Selecting a place to work
To keep your computer in prime operating condition, protect your work area from:
❖

Dust, moisture, and direct sunlight.

❖

Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones.

❖

Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.

❖

Extreme heat, cold, or humidity.

❖

Liquids and corrosive chemicals.

Keeping yourself comfortable
The Toshiba Instruction Manual for Safety and Comfort, included with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.

Precautions
Your computer is designed to provide optimum safety and ease of use, and to withstand the rigors of travel. You should observe certain precautions to further reduce the risk of personal injury or damage to the computer.
❖

Avoid prolonged physical contact with the underside or surface of the computer.
Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture.
Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately:
1. Turn off the computer.
2. Disconnect the AC adaptor from the power plug socket and computer. 3. Remove the battery pack.
Failure to follow these instructions could result in serious injury or permanent damage to the computer.
Do not turn on the power again until you have taken the computer to an authorized service center.

Getting Started

Selecting a place to work
❖
❖

43

Avoid prolonged physical contact with the underside or surface of the computer.
Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin.

Read the “Avoid extended contact between computer base/palm rest and skin” section in the “Instruction Manual for Safety and
Comfort” that is shipped with your computer.
Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer. It could damage the computer or cause system failure.
❖

Never turn off the computer if a drive light indicates a drive is active.
Turning off the computer while it is reading from or writing to a disk/disc or flash media may damage the disk/disc or flash media, the drive, or both.

❖

Keep the computer and disks away from objects that generate strong magnetic fields, such as large stereo speakers.
Information on some disks is stored magnetically. Placing a magnet too close to a disk can erase important files.
Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could damage the disc and possibly lose data.

❖

Scan all new files for viruses.
This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus. You need a special program to check for viruses.

44

Getting Started

Setting up your computer

Important information on your computer’s cooling fan
Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer.
Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode). In this condition, observe the following:
❖
❖
❖
❖

Never cover your computer or AC adaptor with any object.
Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater.
Never cover or block the air vents including those located at the base of the computer.
Always operate your computer on a hard flat surface. Using your computer on a carpet or other soft material can block the vents located at the base of the computer.

Overheating your computer or AC adaptor could cause system failure, computer or AC adaptor damage or a fire, possibly resulting in serious injury.
Read the “Provide adequate ventilation” section in the “Instruction
Manual for Safety and Comfort” that is shipped with your computer. NOTE

The cooling fan location will vary depending on the computer.

Setting up your computer
TECHNICAL NOTE: You must complete all setup steps up to and including “Setting up your software” on page 49 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, and memory.
Your computer contains a rechargeable main battery that needs to be charged before you can use it.
To use external power or to charge the battery you must attach the
AC adaptor. See “Connecting to a power source” on page 45.

Getting Started

Connecting to a power source
NOTE

45

Please handle your computer carefully to avoid scratching or damaging the surface.

Connecting to a power source
Your computer requires power to operate. Use the power cord/cable and AC adaptor to connect the computer to a live electrical outlet, or to charge the computer’s battery.
Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug directly. Failure to follow this instruction may damage the cord/cable, and/or result in a fire or electric shock, possibly resulting in serious injury.

Always confirm that the power plug (and extension cable plug if used) has been fully inserted into the socket, to ensure a secure electrical connection.
Failure to do so may result in a fire or electric shock, possibly resulting in serious injury.
Be careful if you use a multiple connector. An overload on one socket could cause a fire or electric shock, possibly resulting in serious injury. Always use the TOSHIBA AC adaptor that was provided with your computer and the TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by
TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor or charger. AC adaptor
Power cord/cable
AC adaptor cord

(Sample Illustration) Power cord/cable and AC adaptor

46

Getting Started

Connecting to a power source
To connect AC power to the computer:
1

Connect the power cord/cable to the AC adaptor.

(Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
_

+

2

Plug the AC adaptor cord into the DC-IN on the side of the computer. (Sample Illustration) Connecting the AC adaptor cord to the computer 3

Connect the power cord/cable to a live electrical outlet.
The AC power light on the indicator panel glows white.
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.
The computer’s main battery light gives you an indication of the main battery’s current charge:
❖

Glows amber while the main battery is being charged
(AC adaptor connected)

❖

Glows white when the main battery is fully charged

Getting Started

Charging the main battery

47

❖

❖

NOTE

Is unlit when the main battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet
Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the
AC power supply.
Disconnect the AC power cord/cable and remove the main battery pack. See “Changing the main battery” on page 124 for information on replacing the main battery.

Charging the main battery
Before using the battery to power the computer, you must charge the battery.
To charge the battery, leave the computer plugged into an AC power source with the computer turned off until the battery light glows white. After that, the battery will be completely charged and ready to power the computer.
Once the battery is charged for the first time, avoid leaving the computer plugged in and turned off for more than a few hours at a time. Continuing to charge a fully charged battery can damage the battery. TECHNICAL NOTE: The recharging of the battery cannot occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices. Your computer’s Power
Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.

NOTE

Battery life and charge time may vary depending on the applications, power management settings, and features used.

48

Getting Started

Using the computer for the first time

Using the computer for the first time
The computer is now ready for you to turn it on and begin using it.

Opening the display panel
1

Facing the front of the computer, locate the center of the display panel.

2

Gently raise the panel.

3

Adjust the display to a comfortable viewing angle.

(Sample Illustration) Opening the display panel
NOTE

When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel.

To avoid damaging the display panel, do not force it beyond the point where it moves easily and never lift the computer by the display panel. Do not press or push on the display panel and be careful to remove any pens or other objects from the keyboard area before closing the display panel.
Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate. This is also an intrinsic characteristic of the screen technology. When the computer is operated on battery power, the screen will dim and you may not be able to increase the brightness of the screen while on battery power.

Getting Started

Using the computer for the first time

49

Turning on the power
To turn on the computer:
1

Make sure any external devices (such as the AC adaptor, if you plan to use AC power rather than battery power) are properly connected and ready.

2

Check to ensure that all drives and slots are empty.

3

Press and release the power button. The ON/OFF light glows white. (Sample Illustration) Turning on the power
The preinstalled operating system will load automatically.
When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.

Setting up your software
When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.

NOTE

The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices.

50

Getting Started

Registering your computer with Toshiba
The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. Follow the on-screen instructions. Registering your computer with Toshiba
Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed by either visiting the Toshiba Web site at http://www.register.toshiba.com, or by clicking Start, All
Programs, My Toshiba, and then Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty.
NOTE

To register online, you must be connected to the Internet.

Adding optional external devices
NOTE

Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page 49.

After starting your computer for the first time you may want to:
❖

Add more memory (see “Adding memory (optional)” on page 51)

❖

Connect a mouse (see “Using a mouse” on page 83)

❖

Connect an external keyboard (see “Using an external keyboard” on page 83)

❖

Connect an external monitor (see “Using external display devices” on page 80)

❖

Connect a local printer (see “Connecting a printer” on page 83)

Getting Started

Adding memory (optional)

51

Adding memory (optional)
HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE

Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page 49.

Installing a memory module
Memory modules can be installed in the memory module slots on the base of the computer. You will need a small Phillips screwdriver for this procedure.
If the computer has been running recently, the memory module(s) may be hot. The surrounding area may also be hot. Allow the module(s) to cool to room temperature before replacing it. Avoid touching the cover, the module(s), and the surrounding area before they have cooled. Failure to follow these directions could result in minor bodily injury.

To avoid damaging the computer’s screws, use a small Phillips screwdriver that is in good condition.

Installing a memory module with the computer’s power on may damage the computer, the module, or both.

52

Getting Started

Adding memory (optional)
The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules.
Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Sleep or Hibernation mode, data will be lost.

NOTE

For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.

If the computer is on, begin at step 1; otherwise, skip to step 3.
1

Click Start.

Start button

Shut down button

(Sample Image) Shut down button
2

Click the Shut down button in the lower-right corner of the
Start menu.
The computer closes all open programs, shuts down the operating system, and then turns off.

3

Unplug and remove any cables connected to the computer, including the AC adaptor.

4

Place a soft cloth on the work surface to prevent scratching the top cover of the computer, and then place the computer upside down on the cloth.

5

Remove the main battery. For information on removing the main battery, see “Removing the battery from the computer” on page 125.

Getting Started

Adding memory (optional)

53

Memory module slot cover

Front of computer

(Sample Illustration) Locating the memory module slot cover
6

Using a small Phillips screwdriver, loosen the captive screw that secures the memory module slot cover.
Back of computer

(Sample Illustration) Removing the memory module slot cover
7

Remove the memory module slot cover.

8

Place the screw and the cover in a safe place so that you can retrieve them later.
Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.

54

Getting Started

Adding memory (optional)
Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems.
9

Carefully remove the new memory module from its antistatic packaging, without touching its connector.

10 Locate an empty memory module slot on the underside of the computer. NOTE

If no memory slot is available, you must remove a module by performing steps 2-3 of “Removing a memory module” on page 57.

NOTE

If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module.

NOTE

For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.

11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket. notch latch connector latch key

(Sample Illustration) Aligning the memory module with the socket

Getting Started

Adding memory (optional)

55

12 Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer).

(Sample Illustration) Inserting the memory module into the socket
13 Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module. If the latches and cutouts do not line up correctly, repeat steps 12-13.

latch

latch

(Sample Illustration) Pressing down on the memory module
Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place.

56

Getting Started

Adding memory (optional)
Back of computer
Slot B

Slot A

(Sample Illustration) Inserting the memory module into the slot
NOTE

For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.

14 Replace the memory module slot cover and secure it using the screw. 15 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 126.
16 Turn the computer right side up. Make sure to remove the soft cloth from the work surface before restarting the computer.
Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode). In this condition, observe the following:
❖
❖
❖
❖

Never cover your computer or AC adaptor with any object.
Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater.
Never cover or block the air vents including those located at the base of the computer.
Always operate your computer on a hard flat surface. Using your computer on a carpet or other soft material can block the vents located at the base of the computer.

Overheating your computer or AC adaptor could cause system failure, computer or AC adaptor damage or a fire, possibly resulting in serious injury.

Getting Started

Adding memory (optional)

57

17 Reconnect the cables.
18 Restart the computer.
TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module.
If you are adding extra memory after setting up the computer, verify that the computer has recognized it correctly as described in
“Checking total memory” on page 60.

Removing a memory module
If you need to remove a memory module:
1

Complete steps 1–8 in “Installing a memory module” on page 51 to shut down the computer and open the memory module slot cover.
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Sleep configuration will not be saved.

58

Getting Started

Adding memory (optional)

NOTE

The following screen may appear when you turn on the power:

If “Start Windows® Normally” is highlighted, then press Enter.
If one of the Safe Mode options is highlighted, it is best to press
Enter to go into Safe Mode, then shut down and restart the system, at

which time Windows® should boot back up normally.
When Safe Mode is suggested, this could be a sign that you may need to scan your internal storage drive for errors or defragment the drive. If so, consult Windows® Help and Support.
2

Pull the latches away from the memory module.
The memory module pops up slightly.

NOTE

If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/installing the bottom module.

Getting Started

Adding memory (optional)
3

59

Gently lift the memory module to a 30-degree angle and slide it out of the slot.
Back of computer
Slot B

Slot A

(Sample Illustration) Removing the memory module
4

Replace the memory module slot cover and secure it using the screw. 5

Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 126.

6

Turn the computer right side up. Make sure to remove the soft cloth from the work surface before restarting the computer.
Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode). In this condition, observe the following:
❖
❖
❖
❖

Never cover your computer or AC adaptor with any object.
Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater.
Never cover or block the air vents including those located at the base of the computer.
Always operate your computer on a hard flat surface. Using your computer on a carpet or other soft material can block the vents located at the base of the computer.

Overheating your computer or AC adaptor could cause system failure, computer or AC adaptor damage or a fire, possibly resulting in serious injury.

60

Getting Started

Recovering the Internal Storage Drive
7

Reconnect the cables.

8

Restart the computer.
TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.

Checking total memory
When you add or remove a memory module, you can check that the computer has recognized the change. To do this:
❖

Click Start, Control Panel, System and Security, and then
System.
The System window appears. Installed memory (RAM) is displayed below the System heading.

If the computer does not recognize the memory configuration, turn off the computer and remove the memory module slot cover
(complete steps 1-8 in “Installing a memory module” on page 51), and then check that the module is inserted completely into the socket and lined up squarely with the socket latches.
NOTE

From time to time, Windows® will display a pop-up that says, “Do you want to allow the following program to make changes to this computer?” This is a security feature to prevent programs or people from doing things on your computer without your permission. If you were trying to perform the action, click Continue; otherwise, click
Cancel. If unsure, cancel and try again.

Recovering the Internal Storage Drive
Your computer includes recovery utilities to allow you to recover your internal storage drive if necessary.
The following internal storage drive recovery options are available:

Recovery option

Description

Recover to out-of-box This option restores the original factory image to your state internal storage drive, returning your computer to its out-of-box state. (Recommended recovery method)
See “Recovering to out-of-box state (recommended recovery method)” on page 62.

Getting Started

Recovering the Internal Storage Drive

61

Recovery option

Description

Recover to a custom size partition

This option allows you to specify a custom size for the C: partition and then restores your C: drive to its out-of-box state. Note: With this option, any changes you made to the C: drive and any other drive partitions you may have created are deleted.

See “Recovering to a custom size partition” on page 64.
Recover without
This option recovers just your C: drive, leaving any other changing the internal partitions you may have created (for example, a D: drive) storage drive partitions intact.
See “Recovering without changing the internal storage drive partitions” on page 67.
A recovery image of your computer is stored on the internal storage drive, and the image can be restored by running the recovery utilities directly from your internal storage drive as described in the sections below. However, it is strongly recommended that you create recovery DVDs/media. If the recovery files on your internal storage drive become corrupted or are deleted, you can restore your system from your recovery DVDs/media. Also, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery DVDs/media. It is strongly recommended that you create recovery DVDs/media before using your system for the first time. See “Creating recovery
DVDs/media” on page 69 and “Restoring from recovery
DVDs/media” on page 72.
NOTE

❖ During the internal storage drive recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.
❖ The Toshiba Recovery Wizard also provides the option of erasing your internal storage drive, without restoring the information on the drive. See “Erasing the Internal Storage Drive” on page 74 for more information.
❖ When you restore your system, only the operating system files, applications, and drivers originally shipped with the computer are restored. Any files that you created are not restored during this process. Be sure to separately save the files you have created to external media using Windows® Backup or another backup program. For more information, see “Backing up your work” on page 105.

62

Getting Started

Recovering the Internal Storage Drive

Recovering to out-of-box state (recommended recovery method)
Recovering an internal storage drive to its out-of-box state deletes all partitions on the drive and all information stored in those partitions.
Be sure to save your work to external media before executing the recovery. For more information, see “Backing up your work” on page 105.

NOTE

During the recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor. You can recover the original factory image (returning the computer to its out-of-box state) using the utilities stored on your computer’s internal storage drive or using recovery DVDs/media, if you have created such media. To recover using the first method, follow the procedure below. To recover using the second method, see
“Restoring from recovery DVDs/media” on page 72.
To recover the original factory image using the utilities on your computer’s internal storage drive:
1

Make sure the computer is turned off.

2

Press and hold the 0 (zero) key on your keyboard while powering on the computer.

3

If your system offers a choice of Windows® 7 32-bit or 64-bit operating system, select one at this time. If not, skip to step 4.

4

A warning screen appears, stating that when the recovery is executed all data will be deleted and rewritten. Click Yes to continue. Getting Started

Recovering the Internal Storage Drive

63

(Sample Image) Warning screen
5

When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default
Software and then click Next.

(Sample Image) Selecting a Process screen
6

The Recovery of Factory Default Software screen appears.
Select Recover to out-of-box state.

64

Getting Started

Recovering the Internal Storage Drive

(Sample Image) Recovery of Factory Default Software screen
7

Click Next.
A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding (see “Backing up your work” on page 105).

8

Click Next to begin the recovery.
When the process is complete, a message displays indicating that the internal storage drive has been recovered.

9

Press any key on the keyboard to restart the computer.

Recovering to a custom size partition
Recovering to a custom size partition deletes all partitions on the drive and all information stored in those partitions. Be sure to save your work to external media before executing the recovery. For more information, see “Backing up your work” on page 105.

NOTE

During the recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor. Getting Started

Recovering the Internal Storage Drive

65

The “Recover to a custom size partition” option restores your C: drive to its out-of-box state, and allows you to specify the size for the C: partition. You can resize and recover the C: drive using the utilities stored on your computer’s internal storage drive or using recovery DVDs/media, if you have created such media. To recover using the first method, follow the procedure below. To recover using the second method, see “Restoring from recovery
DVDs/media” on page 72.
To resize and recover the C: drive using the utilities on your computer’s internal storage drive:
1

Make sure the computer is turned off.

2

Press and hold the 0 (zero) key on your keyboard while powering on the computer.

3

If your system offers a choice of Windows® 7 32-bit or 64-bit operating system, select one at this time. If not, skip to step 4.

4

A warning screen appears, stating that when the recovery is executed all data will be deleted and rewritten. Click Yes to continue. (Sample Image) Warning screen

66

Getting Started

Recovering the Internal Storage Drive
5

When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default
Software and then click Next.

(Sample Image) Selecting a Process screen
6

The Recovery of Factory Default Software screen appears.
Select Recover to a custom size partition.

(Sample Image) Recovery of Factory Default Software screen
7

Use the on-screen arrow buttons in The size of drive C: field to set the partition size.

Getting Started

Recovering the Internal Storage Drive
8

67

Click Next.
A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding (see “Backing up your work” on page 105).

9

Click Next to begin the recovery.
When the process is complete, a message displays indicating that the C: drive has been recovered.

10 Press any key on the keyboard to restart the computer.

Recovering without changing the internal storage drive partitions
Recovering without changing the internal storage drive partitions deletes all information stored on the C: drive. Be sure to save your work to external media before executing the recovery (see “Backing up your work” on page 105). If you have created other partitions
(for example, a D: drive), those partitions will remain intact and any information on them will not be affected.

NOTE

During the internal storage drive recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.

You can recover the C: drive without affecting other partitions by either using the utilities stored on your computer’s internal storage drive or by using recovery DVDs/media, if you have created such media. To recover using the first method, follow the procedure below. To recover using the second method, see “Restoring from recovery DVDs/media” on page 72.
To recover using the utilities on your computer’s internal storage drive: 1

Make sure the computer is turned off.

2

Press and hold the 0 (zero) key on your keyboard while powering on the computer.

3

If your system offers a choice of Windows® 7 32-bit or 64-bit operating system, select one at this time. If not, skip to step 4.

68

Getting Started

Recovering the Internal Storage Drive
4

A warning screen appears stating that when the recovery is executed all data will be deleted and rewritten. Click Yes to continue. (Sample Image) Warning screen
5

When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default
Software and then click Next.

(Sample Image) Selecting a Process screen

Getting Started

Recovering the Internal Storage Drive
6

69

The Recovery of Factory Default Software screen appears.
Select Recover without changing the hard drive partitions.

(Sample Image) Recovery of Factory Default Software screen
7

Click Next.
A confirmation message displays reminding you that all data on the C: drive will be lost during the recovery process. Be sure to save your work to external media before proceeding (see
“Backing up your work” on page 105).

8

Click Next to begin the recovery.
When the process is complete, a message displays, indicating that the C: drive has been recovered.

9

Press any key on the keyboard to restart the computer.

Creating recovery DVDs/media
It is strongly recommended that you create recovery DVDs/media.
If the recovery files on your internal storage drive become corrupted or are deleted, you can restore your system from your recovery DVDs/media. Also, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery DVDs/media.

70

Getting Started

Recovering the Internal Storage Drive

NOTE

When you create recovery DVDs/media, only the operating system files, applications, and drivers originally shipped with the computer are backed up to the external media and can be restored from this media. Any files that you created are not backed up on the recovery
DVDs/media. You will need to separately back up the files you created; for more information, see “Backing up your work” on page 105.

When you create recovery DVDs/media, the system will prompt you to insert several blank DVDs or connect one or more USB flash drives of a certain minimum capacity to your computer. The amount of space required for storing the recovery files varies by computer model. Follow the procedure below to determine how much space you will need for storing your system’s recovery files.
To create recovery DVDs/media:
1

Click Start, All Programs, My Toshiba, and then Recovery
Media Creator.
The TOSHIBA Recovery Media Creator dialog box displays.

(Sample Image) TOSHIBA Recovery Media Creator dialog box
2

Select DVD or USB Flash from the drop-down lists next to
“System Recovery Media” and “Application Discs,” depending on the type of external media you want to use.

Getting Started

Recovering the Internal Storage Drive
NOTE

71

You cannot store your system’s applications on the same drive or disc/disc set where the rest of the system recovery files are stored.
For example, you will need to store the applications on one USB flash drive and the system recovery files on another USB flash drive.
Or, store the applications on DVD and the system recovery files on a
USB flash drive, or vice versa.

3

Check the Information area of the dialog box to determine the number of DVDs you will need and/or the minimum amount of storage space required for copying your system’s recovery files to USB flash drive(s).

4

Do one of the following:
❖

If you are copying files to DVD, insert a blank DVD into the optical disc drive.

❖

If you are copying files to a USB flash drive, connect a
USB flash drive of the required minimum capacity (as specified in the TOSHIBA Recovery Media Creator utility) to your computer.
All information stored on your DVDs or USB flash drive(s) will be erased during the process of creating the recovery DVDs/media. Be sure to save the information stored on your external media to another storage device before executing this procedure, or use blank media.

5

Click the Create button in the TOSHIBA Recovery Media
Creator utility dialog box.

6

Follow the on-screen prompts to complete the copy process.

NOTE

If you are copying the recovery files to DVDs, be sure to label each
DVD in the set sequentially (for example, “1 of 3,” “2 of 3,” etc.), so that you will know in which order to insert the discs during recovery.

For information on using the Recovery media you have created with the preceding steps, see “Restoring from recovery DVDs/media” on page 72.

72

Getting Started

Recovering the Internal Storage Drive

Restoring from recovery DVDs/media
The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery (see “Backing up your work” on page 105).

NOTE

During the internal storage drive recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.

If you have created recovery DVDs/media for your system, you can restore your system from such media, if necessary. For example, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery
DVDs/media. For instructions on creating recovery DVDs/media, see “Creating recovery DVDs/media” on page 69.
With recovery media, you can:
❖

Recover to out-of-box state (recommended recovery method)

❖

Recover to a custom size partition

❖

Recover without changing the internal storage drive partitions

For more information on these options, see “Recovering the
Internal Storage Drive” on page 60.
NOTE

When you restore your system, only the operating system files, applications, and drivers originally shipped with the computer are restored. Any files that you created are not restored during this process. Be sure to separately save the files you have created to external media using Windows® Backup or another backup program.
For more information, see “Backing up your work” on page 105.

To recover your internal storage drive from recovery DVDs/media:
1

Shut down and turn off your computer.

2

Do one of the following:
❖

If your recovery files are on DVDs, insert the first recovery
DVD into your optical disc drive.

❖

If your recovery files are on a USB flash drive, connect the
USB flash drive to your computer.

Getting Started

Recovering the Internal Storage Drive
3

73

Turn on your computer. When the initial screen displays, press
F12.
The boot menu displays.

4

Using the arrow keys, select the DVD option or the USB Flash option, depending on which type of media you are using, and then press Enter.

5

A warning screen appears, stating that when the recovery is executed all data on your internal storage drive will be deleted and rewritten. Click Yes to continue.

6

When the Toshiba Recovery Wizard opens and the Selecting a
Process screen displays, select Recovery of Factory Default
Software and then click Next.

7

Select one of the following options:
❖

❖

Recover without changing the hard drive partitions—
If you want to recover the C: partition only, leaving other partitions you have created intact

❖

8

Recover to out-of-box state (recommended recovery method)—If you want to recover the original factory image Recover to a custom size partition—If you want to recover the C: drive to its out-of-box state and specify a custom size for the C: drive. Note: This option deletes all other partitions from the drive.

Follow the on-screen instructions to complete the recovery process. When the process is complete, a message displays indicating that the drive has been recovered.

9

Press any key on the keyboard to restart the computer.

74

Getting Started

Erasing the Internal Storage Drive

Erasing the Internal Storage Drive
Erasing the internal storage drive will delete all data on the drive, including the partitions. Be sure to create recovery DVDs/media and back up your data to external media before erasing the internal storage drive.

NOTE

If you want to restore the internal storage drive, use one of the recovery options instead of erasing the drive. For more information, see “Recovering the Internal Storage Drive” on page 60.

To delete all data and partitions from the internal storage drive:
1

Access the Toshiba Recovery Wizard on your internal storage drive or on your recovery DVDs/media.
❖

To access the Recovery Wizard on your internal storage drive: Press and hold the 0 (zero) key while powering on the computer. Read the Warning screen that displays and then click Yes to continue.

❖

To access the Recovery Wizard on your recovery
DVDs/media: Turn off your computer. Insert the first recovery DVD into your optical disc drive or connect the
USB flash drive containing your recovery files to your computer, and then power on the computer. When the initial screen displays, press F12. Using the arrow keys, select the DVD or USB Flash option on the boot menu, depending on which type of media you are using, and then press Enter. Select Toshiba Recovery Wizard, and then click Next.

2

Select Erase the hard disk and then click Next.

3

Choose one of the following options on the Erase the hard disk screen: ❖

Delete all data and partitions from the hard disk—This option deletes all of the data on the internal storage drive without overwriting the drive.

❖

Delete all partitions and overwrite all sectors on the hard disk—This option deletes all data and then overwrites the entire internal storage drive for security purposes. This process may take several hours, depending on the size of your internal storage drive.

Getting Started

Checking the internal storage drive operating status

75

(Sample Image) Erase the hard disk screen
4

Click Next.
A confirmation message displays reminding you that all data on the internal storage drive will be lost. Be sure you have saved your work to external media (see “Backing up your work” on page 105) and created recovery DVDs/media (see
“Creating recovery DVDs/media” on page 69) before proceeding. 5

Click Next to begin erasing the internal storage drive.
When the process is complete, a message displays, indicating that the internal storage drive has been erased.

6

Press any key on the keyboard to restart the computer.

Checking the internal storage drive operating status
After restoring your internal storage drive, you can check its status as follows:
1

Click Start.

2

Right-click Computer.

3

Select Manage.

4

Click Disk Management.

5

Highlight the internal storage drive in the Volume list to display its status in the lower portion of the screen.

76

Getting Started

Using the TouchPad™

Installing drivers and applications
The Toshiba Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer.
To reinstall drivers and applications:
1

Click Start, All Programs, My Toshiba, and then TOSHIBA
Application Installer.

2

Click Next.

3

Click the item you want to install.

4

Click Install.

5

Follow the on-screen prompts to complete the installation process. Using the TouchPad™
NOTE

Some of the TouchPad operations described in this section are only supported in certain applications.

You can use the TouchPad™ (the small, touch-sensitive area in front of the keyboard) and the adjacent control buttons to:
❖

Move the pointer on the screen

❖

Select an item on the screen

❖

Open or activate an item on the screen

❖

Scroll through a document or information

❖

Zoom in for a close-up view

❖

Zoom out to see more information at once

TouchPad™

Primary control button

Secondary control button

(Sample Illustration) The TouchPad and associated control buttons

Getting Started

Using the TouchPad™

77

Refer to the table below for specific instructions on performing each operation.
NOTE

To:

The pointer is the icon (usually an arrow) that moves on the screen when you slide your finger across the TouchPad or move a mouse connected to your computer.

Do the following:

Example:

Move the on-screen Slide your finger across the TouchPad in the direction you want to move the pointer. pointer To move the pointer a longer distance, slide your finger several times across the
TouchPad in the preferred direction.
(Sample Illustration)
Pointer moves to the right

Select an item

1
2

Move the pointer to the item you want to select. Do one of the following:
❖ Tap the TouchPad once
OR
❖ Press and release the primary
(left-hand) control button

Open or activate an 1 item 2

Right-click an item

1

(Sample Illustration)
Tap once to select

Move the pointer to the item you want to open/activate. Do one of the following:
❖ Tap the TouchPad twice in rapid succession OR
(Sample Illustration)
❖ Press and release the primary
Tap twice to open control button twice in rapid succession Move the pointer to the item you want to right-click. 2 Press and release the secondary control button. This feature varies by program. Check your program documentation for specific instructions on right-clicking.
(Sample Illustration)
Click the secondary
(right-hand) control button 78

Getting Started

Using the TouchPad™

To:

Do the following:

Scroll vertically

Example:

Slide your finger along the right edge of the
TouchPad in the direction you want to scroll.
Repeat to scroll a longer distance.
(Sample Illustration)
Vertical scrolling active area Scroll horizontally

Slide your finger along the bottom edge of the TouchPad in the direction you want to scroll. Repeat to scroll a longer distance.

(Sample Illustration)
Horizontal scrolling active area

Scroll continuously 1
(Circular scrolling)
2
3

4

Begin scrolling vertically or horizontally by sliding your finger along the right or bottom edge of the TouchPad as described above.
Without lifting your finger from the
TouchPad, start moving your finger in a (Sample Illustration) circular motion on the TouchPad.
Circular scrolling
(vertically)
To scroll in the opposite direction, reverse the direction of the circular motion. To stop scrolling, lift your finger off of the TouchPad.

(Sample Illustration)
Circular scrolling
(horizontally)

Getting Started

Using the TouchPad™
To:

Do the following:

Zoom in/out

79

Example:

To zoom in:
❖ Place two fingers close together on the TouchPad and then slide them apart. To zoom out:
❖ Place two fingers slightly apart on the TouchPad and then slide them together. (Sample Illustration)
Zooming in

(Sample Illustration)
Zooming out

Adjusting TouchPad™ settings
While you are typing, the on-screen pointer may seem to move or jump around “by itself” to random locations on the screen. The on-screen pointer may also seem to automatically select text, click buttons, and activate other user interface elements. For help with these problems, try one or more of the following:
❖

Try adjusting your typing technique to avoid accidental contact with the TouchPad™. You may be inadvertently brushing the
TouchPad with the heel of your hand as you type. Also, accidental light touches or taps on the TouchPad may select an item or text on the screen, and potentially the item or text may be replaced by the next character you type.

❖

Temporarily disable the TouchPad, so that it does not respond to touch or button presses while you type. See “Disabling or enabling the TouchPad™” on page 80.

❖

Disable the tapping feature. If you disable tapping only, you can still use the TouchPad’s control buttons and move the pointer by sliding your finger on the TouchPad.

❖

Adjust the sensitivity of the TouchPad, so that it is less responsive to accidental light taps and lighter finger pressure.

80

Getting Started

Using external display devices

NOTE

TouchPad setting options vary by computer model. The TouchPad settings are accessible through the Mouse Properties option of the
Windows Control Panel. For more information, please visit www.support.toshiba.com, and enter the phrase “Mouse pointer jumps around as you type” into the Search field.

Disabling or enabling the TouchPad™
The TouchPad™ is enabled by default. To enable/disable the
TouchPad, do one of the following:
❖

Press the TouchPad ON/OFF (
(Available on certain models.)

❖

Press Fn + F9. For more information, see “Disabling or enabling the TouchPad™” on page 202.

NOTE

Alternately, you can disable only the tapping feature. If you disable tapping only, you can still use the TouchPad’s control buttons and move the pointer by sliding your finger on the TouchPad. To disable tapping only, use the Mouse Properties option in the Windows
Control Panel.

) button.

Using external display devices
Your computer comes with a built-in display, but you can also connect the following types of external display devices to the video ports described below:
❖

An HDMI™-compatible television or external display device via the HDMI™ Out port*

❖

An external monitor or projector via the RGB (monitor) port

RGB (Monitor) port

HDMI™ Out port*
*Available on certain models

(Sample Illustration) Video ports on left side of computer

Getting Started

Using external display devices

81

Selecting video cables
To connect a device to the HDMI™ Out port, you must purchase an
HDMI™ cable.

Connecting an HDMI™-compatible television or external display device To connect an HDMI™-compatible television or external display device to the computer:
❖

Connect one end of an HDMI™ cable (not included with your computer) to the HDMI™ Out port on the side of your computer, and then connect the other end of the cable to your television. Refer to the manual that came with the television for more information.
Your computer will automatically detect the external display device. Connecting an external monitor or projector
You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this:
1

Read the directions that came with the monitor to see if you first need to install new software.

2

Connect the monitor’s video cable to the RGB (monitor) port on the side of the computer.

3

Connect the device’s power cable to a live electrical outlet.

4

Turn on the external device.
Your computer will automatically detect the external display device. NOTE

In the future you can change the display settings by pressing
Fn + F5, or by configuring the display properties settings.

82

Getting Started

Using external display devices

Directing the display output when you turn on the computer
Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously.
NOTE

Some modes are only available with the appropriate device attached and turned on.

The quickest way to change the display output settings is to use the display hot key (Fn + F5):
1
2

Press Fn and F5 simultaneously.
While holding down Fn, press F5 repeatedly until the setting you want takes effect. Briefly pause each time you press the F5 key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is connected): ❖ Built-in display only
❖ Built-in display and external monitor (simultaneously)
❖ External monitor only
❖ Built-in display and TV (or other external video device)
❖ TV (or other external video device)
❖ External monitor and TV
❖ Built-in display and external monitor (extended mode)
❖ Built-in display and TV (extended mode)
❖ External monitor and TV (extended mode)
❖ Swap-Switch primary display between internal display and external monitor when using extended desktop

(Sample Image) Display options window
3

Release the Fn key.

Getting Started

Using an external keyboard

83

Adjusting the quality of the external display
To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration steps. Using an external keyboard
If you prefer to use an external keyboard, you can attach one to your computer. The computer’s USB ports support most
USB-compatible keyboards.

Using a mouse
You may want to use a mouse instead of the computer’s built-in
TouchPad™. You can use a USB-compatible mouse.

Connecting a printer
NOTE

Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a printer.

You can connect a USB-compatible printer to your computer through the USB ports. To determine if the printer is
USB-compatible, check its documentation.
To make the connection, you need a suitable USB cable which may come with your printer. If a USB cable was not included with your printer, you can purchase one from a computer or electronics store.
If your printer supports Plug and Play, your computer may automatically recognize the printer; the printer is then ready for use.
Refer to your printer documentation for further instructions.
TECHNICAL NOTE: To determine if your printer supports Plug and
Play, check its documentation.

84

Getting Started

Connecting a printer
If your printer does not support Plug and Play, you can set up the printer as described in “Setting up a printer” on page 84.
To connect a printer to your computer:
1

Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports.

2

Plug the printer’s power cable into a live AC outlet.

Setting up a printer
NOTE

Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure.

If your printer does not support Plug and Play, follow these steps to set it up for the first time. You only need to set up the printer once.
1

Click Start, Control Panel, Hardware and Sound, and then under Devices and Printers, click Add a printer.
The Add Printer Wizard appears.

(Sample Image) Add Printer Wizard
2

Follow the on-screen instructions to set up your printer.

Getting Started

Turning off the computer

85

Turning off the computer
Pressing the power button before shutting down the Windows® operating system could cause you to lose your work. Make sure the system indicator panel’s storage drive light and the drive in-use light are off. If you turn off the power while a disk/disc is being accessed, you may lose data or damage the disk/disc and/or drive.
It is a good idea to turn off your computer when you are not using it for a while.
If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.

Options for turning off the computer
Depending on the operating system installed, you have more than one option available for turning off the computer: Shut down,
Hibernate, and Sleep. Each option has its advantages.
❖

Use the Shut down or Hibernate command if you will not be using the computer for several days or if you must turn off your computer. You must turn off your computer in order to upgrade your computer’s internal hardware (such as memory).
TECHNICAL NOTE: Before using the Shut down option to turn off your computer, save your files and make sure all disk/disc activity lights are off.
If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.

❖

Use the Sleep command to save your work, system settings, and current state of the desktop to memory, so that when you turn on the computer again, you will quickly and automatically return to where you left off.

86

Getting Started

Turning off the computer

Hibernation mode
Hibernation mode shuts the computer down completely, but it first saves the current state of the computer to the internal storage drive.
Since Hibernation mode does not require power to maintain the saved information, system settings are retained indefinitely.
Factors to consider when choosing Hibernation:
❖

While in Hibernation mode, the computer uses no main battery power. ❖

Because the state of the system is stored to the internal storage drive, no data is lost if the main battery discharges.

❖

Restarting from Hibernation takes less time and consumes less main battery power than restarting after turning off the computer using the Shut down command.

❖

Restarting from Hibernation takes a little more time and consumes more main battery power than restarting from Sleep.

❖

When starting up again, the computer returns to the state in which you left it, including all open programs and files you were using.

For information on how to use and configure Hibernation mode see
“Using and configuring Hibernation mode” on page 90.

Sleep mode
The Sleep command places the computer into a power-saving mode. Sleep saves the current state of the computer to memory so that, when you restart the computer, you can continue working from where you left off.
NOTE

After your computer sleeps for an extended period of time, the
Windows® operating system may save any open documents and programs to your internal storage drive, and then shuts down the computer. Factors to consider when choosing Sleep:
❖

While in Sleep mode, the computer uses some main battery power. ❖

Because the state of the system is stored in memory, you will lose data if the main battery discharges completely while the computer is in Sleep mode.

Getting Started

Turning off the computer

87

❖

Restarting from Sleep takes less time and consumes less main battery power than restarting after turning off the computer using the Hibernation or Shut down commands.

❖

When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using.

❖

If the battery charge becomes critically low, the computer will try to enter Hibernation mode.
If you power down using the Sleep command and the main battery discharges fully, your unsaved information will be lost. Be sure to save your work first.

For information on using Sleep, see “Using and configuring Sleep mode” on page 92.

Using the Shut down command
The Shut down command completely shuts down the computer without saving your work or the current state of the computer. This command closes all open programs, shuts down the operating system, and then turns off your computer.
To turn off your computer using the Shut down command:
1

Click Start.

Start button

Shut down button

(Sample Image) Shut down button
2

Click the Shut down button in the lower-right corner of the
Start menu.
The computer closes all open programs, shuts down the operating system, and then turns off.

88

Getting Started

Turning off the computer

Turning off the computer more quickly
You can also turn off the computer by pressing the power button.
To use this method, you first need to activate it using the Power
Options feature. By default, pressing your computer’s power button puts the computer into Sleep mode.
1

Click Start, Control Panel, System and Security, and then
Power Options.
The Power Options window appears.

2

Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears.

(Sample Image) Edit Plan Settings screen
3

Click Change advanced power settings.
The Advanced settings tab of the Power Options window appears. Getting Started

Turning off the computer
4

89

Double-click Power buttons and lid to display the actions that you can configure.

(Sample Image) Advanced settings tab of Power Options screen
5

Select the options you want from the drop-down lists.

NOTE

These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. ❖

Lid close action
Set this option to Shut down if you want the computer to shut down when you close the display panel.

❖

Power button action
Set this option to Shut down if you want the computer to shut down when you press the power button.

6

Click Apply.

7

Click OK.

Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set.

90

Getting Started

Turning off the computer

Restarting your computer
To start the computer up again, press the power button until the
ON/OFF light glows white.
If you turn off the computer by closing the display panel, you can start it again by opening the display panel.

Using and configuring Hibernation mode
To turn off the computer using the Hibernation command:
1

Click Start, and then click the arrow next to the Shut down button in the lower-right corner of the Start menu.

Hibernate

Start button

Arrow

(Sample Image) Shut down menu
2

Click Hibernate in the pop-up menu.
The computer saves the state of all open programs and files, turns off the display, and then turns off.

Configuring Hibernation mode options
You can place the computer into Hibernation mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Hibernation mode.
To use any of these methods, you first need to enable them using the
Power Options feature.
1

Click Start, Control Panel, System and Security, and then
Power Options.
The Power Options window appears.

Getting Started

Turning off the computer
2

91

Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears.

(Sample Image) Edit Plan Settings screen
3

Click Change advanced power settings.
The Advanced settings tab of the Power Options window appears. 4

Double-click Power buttons and lid to display the actions that you can configure.

(Sample Image) Advanced settings tab of Power Options screen
5

Select Hibernate for the options you want.

92

Getting Started

Turning off the computer

NOTE

These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. ❖

Lid close action
Set this option to Hibernate if you want the computer to go into Hibernation mode when you close the display panel. ❖

Power button action
Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button. 6

Click Apply.

7

Click OK.

Once the computer is configured, you can place it into Hibernation mode by either pressing the power button or closing the display panel, depending on the Hibernation options set.

Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using.
If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.

Using and configuring Sleep mode
To turn off the computer using the Sleep command:
1

Click Start, and then click the arrow next to the Shut down button in the lower-right corner of the Start menu.

Sleep

Start button

(Sample Image) Shut down menu

Arrow

Getting Started

Turning off the computer
2

93

Click Sleep in the pop-up menu.
The computer saves the status of all open programs and files to the memory, turns off the display, and enters into a low-power mode. The ON/OFF light blinks amber indicating the computer is in Sleep mode.

Configuring Sleep mode options
You can place the computer into Sleep mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into
Sleep mode.
To use any of these methods, you first need to enable them using the
Power Options feature.
1

Click Start, Control Panel, System and Security, and then
Power Options.
The Power Options window appears.

2

Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears.

(Sample Image) Edit Plan Settings screen
3

To change the amount of time after which the computer enters
Sleep mode:
❖

Under Put the computer to sleep, select the desired amount of time in both the On battery and Plugged in categories. ❖

To disable the computer from automatically entering Sleep mode, select Never.

94

Getting Started

Turning off the computer
4

Click Change advanced power settings.
The Advanced settings tab of the Power Options window appears. 5

Double-click Power buttons and lid to display the actions that you can configure.

(Sample Image) Advanced settings tab of Power Options screen
6

Select Sleep for the options you want.

NOTE

These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. ❖

Lid close action
Set this option to Sleep if you want the computer to go into Sleep mode when you close the display panel.

❖

Power button action
Set this option to Sleep if you want the computer to go into Sleep mode when you press the power button.

7

Click Apply.

8

Click OK.

Once the computer is configured, you can place it into Sleep mode by either pressing the power button or closing the display panel, depending on the Sleep options set.

Getting Started

Customizing your computer’s settings

95

Starting again from Sleep mode
To start up the computer from Sleep mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using.
If you place the computer in Sleep mode by closing the display panel, you can start it again by opening the display panel.

Closing the display panel
After you have turned off the computer, close the display panel to keep dust and dirt out of the computer.

Customizing your computer’s settings
There are several ways in which you can customize your computer to suit your particular requirements. Refer to your operating system documentation or Help and Support for details.
You may also wish to customize your power usage settings. For more information, see “Power Plans” on page 122. There are additional custom settings you can choose. See “Utilities” on page 142.

Caring for your computer
This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see
“Taking care of your battery” on page 127.
NOTE

Please handle your computer carefully to avoid scratching or damaging the surface.

Cleaning the computer
Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings. Never spray cleaner directly onto the computer and/or display. Never use harsh or caustic chemical products to clean the computer.
To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth.

96

Getting Started

Caring for your computer

Moving the computer
Before moving your computer, even across the room, make sure all drive activity has ended (the internal storage drive and optical disc drive indicator lights stop glowing) and all external peripheral cables are disconnected.
Do not pick up the computer by its display panel or by the back.
Doing so could damage the system.

Using a computer lock
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com.

(Sample Illustration) Computer lock cable
To secure the computer:
1

Wrap the cable through or around some part of a heavy object.
Make sure there is no way for a potential thief to slip the cable off the object.

2

Pass the locking end through the loop.

3

Insert the cable’s locking end into the security lock slot on your computer, then engage the locking device.
The computer is now securely locked.

(Sample Illustration) Attaching security lock cable

Chapter 2

Learning the Basics
This chapter gives some computing tips and provides important information about basic features.

Computing tips
❖

Save your work frequently.
Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
See “Saving your work” on page 103 for further information.
HINT: Some programs have an automatic save feature that can be activated. This feature saves your file to the internal storage drive at preset intervals. See your software documentation for details.

97

98

Learning the Basics

Using the keyboard
❖

Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place.
It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy. For more information, see “Data and system configuration backup in the
Windows® operating system” on page 182.

❖

Use Error-checking and Disk Defragmenter regularly to check and optimize disk space and improve performance.

❖

Scan all new files for viruses.
This precaution is especially important for files you receive via external media, email, or download from the Internet.

❖

Take frequent breaks to avoid repetitive-motion injuries and eyestrain. ❖

Do not turn off the computer if a drive indicator light indicates a drive is active.
Turning off the computer while it is reading from or writing to a disk may damage the disk, the drive, or both.

NOTE

The Windows® operating system records information, such as your desktop setup, during its shutdown procedure. If you do not let the
Windows® operating system shut down normally, details such as new icon positions may be lost.

Using the keyboard
Your computer’s keyboard contains character keys, control keys, function keys, and special Windows® keys.

(Sample Illustration) Keyboard

Learning the Basics

Using the keyboard
NOTE

99

To capture a print screen of the entire screen, press the
Fn + PRTSC key.
To capture only the active window displayed, press Fn + ALT while simultaneously pressing the PRTSC key.

(Sample Illustration) PRTSC key on the keyboard

Character keys
Typing with the character keys is very much like typing on a typewriter, except that:
❖

The space bar creates a space character instead of just passing over an area of the page.

❖

The lowercase letter l (el) and the number 1 are not interchangeable. ❖

The uppercase letter O and the number 0 are not interchangeable. Ctrl, Fn, and Alt keys

(Sample Illustration) Ctrl, Fn, and Alt keys
The Ctrl, Fn, and Alt keys do different things depending on the program you are using. For more information, see your program documentation. Function keys
The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard.

(Sample Illustration) Function keys

100

Learning the Basics

Starting a program
F1 through F12 are called function keys because they execute

programmed functions when pressed. Used in combination with the
Fn key, function keys marked with icons execute specific functions on the computer. For example, Fn + F9 turns the TouchPad™

ON/OFF. For more information, see “Hot key functions” on page 194.

Special Windows® keys
Windows® key
Application key

(Sample Illustration) Special Windows® keys
Your computer’s keyboard has one key and one button that have special functions in Windows®:
❖

Windows® key—Opens the Start menu

❖

Application key—Has a similar function as the secondary mouse button

Starting a program
The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use the Start menu or Windows® Explorer.
If you prefer to open the program first, you have four options. You can:
❖

Double-click the icon for the program on your desktop

❖

Use the Start menu

❖

Use Windows® Explorer to locate the program file

❖

Use the Search programs and files field in the Start menu

The next three sections explain how to start a program from the
Start menu, Windows® Explorer, and the Search programs and files field. Learning the Basics

Starting a program

101

Starting a program from the Start menu
When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the
Windows® WordPad program as an example:
1

Click Start, and then All Programs.
The Windows® operating system displays the All Programs menu, which lists programs and program groups. If your program is listed, go to step 3, otherwise, continue with step 2.

NOTE

2

If you pause with your mouse on All Programs, it will open it up. You may need to scroll up or down to see the complete list.
Click the program group, in this example, Accessories.
The Accessories menu is displayed.

3

Click the program, in this example, WordPad.
WordPad opens.
To close the program, click the Close button in the upper-right corner of the program’s window.

Starting a program from Windows® Explorer
If a program is not listed in the All Programs menu, you can start it from Windows® Explorer. Windows® Explorer gives you a view of your computer’s contents as a hierarchy or “tree.” You can easily see the contents of each drive and folder on your computer. To use this method, you should know the file name and location of the program’s executable file (this file ends with .exe).
This example opens WordPad using Windows® Explorer.
NOTE

If you pause with your mouse on All Programs, it will open it up. You may need to scroll up or down to see the complete list.

1

Click the Windows Explorer icon on the taskbar.

2

In the left part of the window, double-click Computer to expand the window.

3

In the left part of the window, click the line that ends in “(C:).”

102

Learning the Basics

Starting a program
4

In the right part of the window, double-click the folder containing the program, in this case Program Files.
Windows® Explorer shows the contents of the Program Files folder on the right side of the window.

5

In the right part of the window, double-click Windows NT.

6

In the right part of the window, double-click Accessories.
Windows® Explorer shows the contents of the Accessories folder on the right side of the window.

7

In the right part of the window, double-click wordpad.
The operating system opens WordPad.
To close the program, click the Close button in the upper-right corner of the program’s window.

Starting a program using the Search programs and files field
This example uses the Start menu’s Search programs and files field to start WordPad:
1

Click Start to display the Start menu.
The Search programs and files field appears at the bottom of the Start menu.

Search programs and files field

(Sample Image) Search programs and files field in Start menu
2

Start typing the program’s name (wordpad) in the Search programs and files field.
As you type, all matching files and programs are displayed in a separate window.

3

In the search results window, click WordPad under Programs.

Learning the Basics

Saving your work

103

Saving your work
Before you turn off the computer using the Shut down command, save your work on the internal storage drive, external media, flash media, or optical disc. This is one of the most important rules of computing. When you turn off the computer using the Sleep or Hibernate commands, your work should be there when you resume.
Many programs offer a feature that saves documents at regular intervals. Check your program’s documentation to see if it has an automatic save feature.

Saving files
1

Click on the arrow in the upper-left corner of your
Windows®-based application to display the drop-down menu, and then click Save.
If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box.
Use this dialog box to specify where to store the document and to give it a file name.

(Sample Image) Save As dialog box
2

Choose the drive and folder where you want your file to be stored. 3

Type a file name, then click Save.

104

Learning the Basics

Printing your work

File names
The Windows® operating system supports long file names that can contain up to 260 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters.
You may use all the letters, numbers, and other characters on the keyboard, except for these characters: \ / ? : * " > < |. File names are not case-sensitive.

Using a file extension
Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft® Word saves files with a .doc/.docx extension.
Any file name with an extension of “.doc/.docx” is assumed to be a
Microsoft® Word file. Creating your own extension is usually unwise, since the program is unlikely to recognize a strange extension and may refuse to handle your file correctly.
TECHNICAL NOTE: By default, the Windows® operating system does not show file extensions. For information on showing or hiding file extensions, see your Windows® online Help.

Printing your work
Ensure the operating system is set up for your printer as described in “Setting up a printer” on page 84.
HINT: You only need to set up the printer the first time you connect it.
If you use more than one printer or are changing printers, you will need to set up the Windows® operating system to run with the additional printer(s).
To print a file:
1

If your printer is not on, turn it on now.

Learning the Basics

Backing up your work
2

105

Click on the arrow in the upper-left corner of your
Windows®-based application to display the drop-down menu, and then click Print.
The program displays a Print dialog box.

(Sample Image) Print dialog box
3

Specify the print parameters. For example, the range of pages and number of copies to print.

4

Click Print.

Backing up your work
Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, external storage media, or to a network, if available. To back up several files at one time, use the Microsoft® Windows®
Backup program preinstalled on the computer’s internal storage drive. Also see “Backing up your data or your entire computer with the Windows® operating system” on page 184.
HINT: Backing up all the files on your internal storage drive may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a high-capacity backup system, such as an external hard drive.

106

Learning the Basics

Using the optical disc drive

Restoring your work
To restore information from your backup media to your internal storage drive, use the Restore option in the Windows® Backup and
Restore program. Look in the online Help or your operating system documentation for information on restoring files.

(Sample Image) Backup and Restore screen
TECHNICAL NOTE: When restoring files, the backup program prompts you if you try to overwrite a file that already exists on the internal storage drive. Make sure the backup version is the one you want before overwriting the existing file.

Using the optical disc drive
Optical storage is a popular medium for software, music, and video.
Digital versatile discs or Blu-ray Discs™ (DVDs or BDs) provide a significant increase in data storage and support features that were not available on previous video platforms. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
TECHNICAL NOTE: Your optical disc drive is set to play region 1
(North America) for DVD-ROMs or BD-ROMs, depending on the type of drive. If you play a DVD or BD from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times. On the fourth change, the region will be “locked in.” That is, the drive will only play
DVDs and BDs from that last region. Note that changing from region
1 to region 2 and back to region 1 is counted as two changes.

Learning the Basics

Using the optical disc drive

107

NOTE

For optimum DVD and BD performance, it is recommended that you play DVDs and BDs while running the computer on AC power.

NOTE

When viewing DVD and BD movies use the DVD or BD player software that came with your computer.

Viewing Blu-ray Disc™ movies
Your system may come with a Blu-ray Disc™ drive. Due to differences between High Definition and previous viewing capabilities, consider the following:
❖

Use an HDCP (High-Bandwidth Digital Content Protection)
HDMI™ cable to view High Definition content via your
Blu-ray Disc™ drive on an external monitor or television. The external monitor or television must support HDMI™.

❖

Some Blu-ray Disc™ movies have online content that can be accessed from the disc. To view this content, your computer must be connected to the Internet.

❖

While viewing online content, your system may not view it in
High Definition on an external monitor, even though your display setting is set to simultaneous. This is due to the lower resolution used in the simultaneous setting. For more information on your computer’s display settings, see
“Directing the display output when you turn on the computer” on page 82.

❖

When an HDMI™ cable is used to send a High Definition signal to an external monitor the audio signal is automatically sent with the video signal. If you want to change the destination of the audio signal, use the Sound properties in the
Control Panel.

108

Learning the Basics

Using the optical disc drive

(Sample Image) Sound properties window
❖

If you want to use the internal speakers, click on the Speakers tab and click Set Default.

❖

Use the arrow keys on your keyboard to navigate within the
Blu-ray Disc™ player console.

NOTE

Use of the TouchPad™ or a mouse is not supported within the
Blu-ray Disc™ player.

Optical disc drive components
The optical disc drive is located on the side of the computer.
Your optical disc drive may look like this:

Drive in-use indicator light
Eject button
Manual eject hole

(Sample Illustration) Optical disc drive
Drive in-use indicator light—Indicates when the drive is in use.
Eject button—Press to release the disc tray.

Learning the Basics

Using the optical disc drive

109

Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive.
When the disc tray is open, be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction.
Manual eject hole—Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole.
Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.

Inserting an optical disc
To insert an optical disc into the drive:
1

Make sure the computer is turned on.
The drive will not open if the computer’s power is off.

2

Make sure the drive’s in-use indicator light is off.

3

Press the drive’s eject button.
The disc tray slides partially out of the drive.

4

Grasp the tray and pull it fully open.

(Sample Illustration) Drive tray fully extended
5

Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in “Caring for optical discs” on page 113.

110

Learning the Basics

Using the optical disc drive
6

Place the disc carefully in the disc tray, label side up.

(Sample Illustration) Positioning the disc in the drive
7

Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data.

8

Make sure the disc is completely on the spindle and is lying flat on the tray.
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance.

9

Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
You are ready to use the disc.

Learning the Basics

Using the optical disc drive

111

Playing an audio CD
Insert an audio CD and close the disc tray.
If the computer is turned on, the default player opens.
❖

To play the CD or to pause, click the Play/pause button.

❖

To stop the CD, click the Stop button.
Before putting on headphones to listen, turn the volume down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.

Playing optical media
If you insert an optical disc into the optical disc drive and the
Auto-Run feature does not automatically start your disc, try launching the optical disc manually. To do this, follow these steps:
1

Click Start, and then Computer.

2

Double-click the optical disc drive icon.
The drive will run the optical disc.

If your disc does not run using this method, try using an application that is associated with the media on the disc. For example, if it is a music CD, open Windows Media® Player and use it to select and then play the CD. For other types of media, use the associated software to open the files on the disc.

Recording optical media
Depending on the configuration, your computer may come with an optical disc drive that allows you to:
❖

Play pre-recorded and recorded optical media.

❖

Read/write data and multi-media files to recordable optical media. For more information regarding supported optical media formats please refer to your computer’s detailed specifications at pcsupport.toshiba.com. 112

Learning the Basics

Using the optical disc drive

NOTE

Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical disc drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders. Additionally, certain optical media recorded on your optical disc drive may not play back or operate properly on other computers or optical media players. These problems are not due to any defect in your Toshiba computer or optical disc drive. Please refer to your computer's product specification for listing of specific format compatibilities.
Copy protection technology may also prevent or limit recording or viewing of certain optical media.

For details on how to use the software, please refer to the respective
Online Help menus.

Removing a disc with the computer on
To remove an optical disc with the computer turned on:
1

Press the eject button on the drive.
Do not press the eject button while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray, wait for it to stop spinning before you remove it.

2

Pull the tray out until it is fully open, remove the disc, and place it in its protective cover.

3

Gently press the tray in to close it.

Removing a disc with the computer off
To remove a disc with the computer turned off:
1

Insert a slender object, such as a straightened paper clip, into the manual eject hole.
The disc tray slides partially out of the drive.
Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.

Learning the Basics

Toshiba’s online resources

113

2

Pull the tray out until it is fully open, remove the disc, and place it in its protective cover.

3

Gently press the tray in to close it.

Caring for optical discs
❖

Store your discs in their original containers to protect them from scratches and keep them clean.

❖

Do not bend a disc or place heavy objects on top of it.

❖

Do not apply a label to, or otherwise mar the surface of, a disc.

❖

Hold a disc by its outside edge. Fingerprints on the surface can prevent the optical disc drive from reading the data properly.

❖

Do not expose discs to direct sunlight or extreme heat or cold.

❖

To clean a disc that is dirty, wipe it with a clean, dry cloth. The most efficient method to clean it is to start from the center of the disc and wipe toward the outward edge (not in a circle). If necessary, moisten the cloth with water or a neutral cleaner
(not benzine or rubbing alcohol). Let the disc dry completely before inserting it in the drive.

Toshiba’s online resources
Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades. For more information, see “Contacting Toshiba” on page 187.

Chapter 3

Mobile Computing
This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design
Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba.
We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.

Running the computer on battery power
The computer contains a removable Lithium-Ion (Li-Ion) battery that provides power when you are away from an AC outlet. You can recharge it many times.

114

Mobile Computing

Running the computer on battery power

115

Battery Notice
Battery life rating is for comparison purposes only, and does not indicate the battery life that will be obtained by any individual user.
Actual battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. The battery life rating is only achieved on the select models and configurations tested by Toshiba under the specific test settings at the time of publication and is not an estimate of a system’s battery life under any conditions other than the specific test settings.
Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power. After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see the accessories information included with your computer or visit the Toshiba Web site at accessories.toshiba.com. Use only batteries designed to work with your Toshiba computer.
To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month. The
Lithium-Ion battery has no memory effect so it is not necessary to let the battery fully discharge each time. However, for better accuracy of the battery meter, it is helpful to fully discharge the battery periodically. Please see “Maintaining your battery” on page 128 for procedures. If the computer is continuously operated on AC power, either through an AC adaptor or a port replicator (if applicable to your system), for an extended period (more than a month), the battery may fail to retain a charge. This may shorten the life of the battery, and may cause the battery meter to be inaccurate.
NOTE

For optimum optical media performance, it is recommended that you play DVDs while running the computer on AC power. For more information about Windows® power plans, see “Power Plans” on page 122.

The computer also has an internal real-time-clock (RTC) battery.
The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information. It maintains this information for up to a month while the computer is turned off.

116

Mobile Computing

Charging batteries
TECHNICAL NOTE: Depending on your system, the RTC battery may only charge while the computer is turned on.

Power management
Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes.
Changes to these settings may result in system performance or stability issues. Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s
Customer Support Center.

Using additional batteries
In addition to the main battery, you may also have an optional secondary battery (not included with your computer). If you travel and need to work for many hours without an AC power source, you may purchase a battery module for use in the computer, or carry additional charged battery packs with you. You can then replace a discharged battery and continue working.
For more information on batteries and accessories, see accessories.toshiba.com. Charging batteries
The battery needs to be charged before you can use it to power the computer. Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery.
Always use the battery charger specified by Toshiba. You can order a
Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. NOTE

Battery charge time may vary depending on the applications, power management settings, and features used.

Mobile Computing

Charging batteries

117

Charging the main battery
To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off.
TECHNICAL NOTE: The recharging of the battery cannot occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices. Your computer's Power Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.
The battery may not start charging immediately under the following conditions: ❖

The battery is extremely hot or cold.
To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to
26 degrees Celsius).

❖

The battery is almost completely discharged.
Leave the power connected and the battery should begin charging after a few minutes.
HINT: Once the battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely. Doing this extends battery life and helps ensure accurate monitoring of battery capacity.

Charging the RTC battery
Your computer has an internal real-time clock (RTC) battery. The
RTC battery powers the System Time Clock and BIOS memory used to store your computer’s configuration settings. When fully charged, it maintains this information for up to a month when the computer is powered off.
The RTC battery may have become completely discharged while your computer was shipped, resulting in a CMOS error message during startup. The error message may vary by computer model.
NOTE

Depending on your system, the RTC battery may only charge while the computer is turned on.

118

Mobile Computing

Monitoring main battery power
To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours.

NOTE

It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock. The computer can be used while the RTC battery is being charged, although the charging status of the RTC battery cannot be monitored. Monitoring main battery power
The computer’s main battery light gives you an indication of the main battery’s current charge.
❖

Glows amber while the main battery is being charged
(AC adaptor connected)

❖

Glows white when the main battery is fully charged

❖

Is unlit when the battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or
AC outlet

NOTE

❖
NOTE

Battery life and charge time may vary, depending upon power management settings, applications and features used.
Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adaptor
If the AC power light flashes amber during charging, either a battery pack is malfunctioning, or it is not receiving correct input from the
AC power supply.
Disconnect the AC power cord/cable and remove the battery pack.
See “Changing the main battery” on page 124 for information on replacing the main battery.

Mobile Computing

Monitoring main battery power

119

HINT: Be careful not to confuse the battery light ( ), the ON/OFF light ( ), and the power button light (near the upper-left corner of the keyboard).
When the ON/OFF light or power button light flashes amber, it indicates that the system is suspended (using the Windows® operating system Sleep command).

Power button System indicator lights

AC power light
ON/OFF light
Battery light
Internal storage drive light
Memory card reader light*
Wireless indicator light
*Available on certain models

(Sample Illustration) Power and battery light locations

Determining remaining battery power
NOTE

Wait a few moments after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations. 120

Mobile Computing

Monitoring main battery power
Move the pointer over the power icon in the notification area, see
“Finding your way around the desktop” on page 132 for more information on the notification area. A pop-up message displays the remaining battery power as a percentage.
With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged. TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit.
The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery. What to do when the main battery runs low
When the main battery runs low you can:
❖

Plug the computer into an external power source and recharge the main battery

❖

Place the computer into Hibernation mode and replace the main battery with a charged spare (not included with your computer) ❖

Save your work and turn off the computer

If you do not manage to do any of these things before the main battery completely runs out of power, the computer automatically enters Hibernation mode and turns itself off. Hibernation mode keeps track of where you were, so that when you turn on the power again, you can continue where you left off.
If you have Hibernation mode enabled (the default), the computer copies the details of your open programs and files to the internal storage drive before shutting down. For more information on using
Hibernation, see “Hibernation mode” on page 86.

Setting battery notifications
You can set two notifications. Each notification can be set to alert you when a specified percentage of remaining battery power has been reached. You can also set the computer to enter Sleep mode or
Hibernation mode or to completely power down when the notification goes off.

Mobile Computing

Monitoring main battery power

121

To change the default notification settings:
1

Click Start, Control Panel, System and Security, and then
Power Options.
The Power Options window appears.

2

Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears.

3

Click Change advanced power settings.
The Advanced settings tab of the Power Options window appears. 4

Double-click Battery to display the battery options.

(Sample Image) Advanced settings tab of Power Options screen
5

Configure the alarm settings to suit your needs.

Conserving battery power
How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as:
❖

How the computer is configured

❖

How much you use the internal storage drive, optical disc drive, or other optional devices

❖

Where you are working, since operating time decreases at low temperatures 122

Mobile Computing

Monitoring main battery power
There are various ways in which you can conserve power and extend the operating time of your battery:
❖

Enable Sleep or Hibernation, which saves power when you turn off the computer and turn it back on again

❖

Use the Windows® power-saving option plans

These power-saving options control the way in which the computer is configured. By using them, you can increase the length of time you can use the computer before you need to recharge the battery.
Microsoft® has combined these options into preset Power Plans.
Using one of these power plans lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
The following sections describe how to choose a Power Plan and discuss each power-saving option.

Power Plans
You can choose a predefined Power Plan or select your own combination of power options. To do this:
1

Click Start, Control Panel, System and Security, and then
Power Options.
The Windows® Power Options window appears.

(Sample Image) Windows® Power Options window
2

Select an appropriate plan for your work environment or create your own custom plan.

3

Click Create a power plan in the left pane to set up a new plan. Mobile Computing

Monitoring main battery power
NOTE

4

123

To edit a plan or to edit advanced settings, continue to the following steps. Click Change plan settings to choose the plan you want to edit. This screen allows you to change basic settings.

5

Click Change advanced power settings to access settings for battery notification levels, internal storage drive power save time, etc.
You can click on the plus signs to expand each item and to see what settings are available for each item.

6

Click OK to save the plan changes you have performed.

By default the two power plans eco and Balanced are satisfactory for most people and do not need to be edited. The eco plan is the best used for maximum battery time. The Balanced plan is a compromise between battery time and performance.

Using a hot key to set the Power Plan
You may use a hot key to set the Power Plan.
To set the Power Plan:
1

Press Fn and F2 simultaneously to display the Power Plan hot key card.

(Sample Image) Power Plan hot key card
2

While continuing to press Fn, press F2 until you select the desired Power Plan.
The Power Plan options are: eco and Balanced.

3

Release the Fn key.
The hot key card disappears. You are now in the selected mode.

124

Mobile Computing

Using the TOSHIBA eco power plan

Using the TOSHIBA eco power plan
This computer is equipped with the TOSHIBA eco power plan.
Operating the computer with this power plan enabled reduces electrical power consumption by slightly lowering system performance. For example, when this power plan is enabled, the brightness of the display is reduced and the interval before Sleep mode takes effect is shortened. To enable or disable the TOSHIBA eco power plan, see “Power Plans” on page 122.
The TOSHIBA eco Utility™ monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To learn how to access the utility, see “TOSHIBA eco Utility™” on page 160.
For more information on the TOSHIBA eco power plan, see the
Help file in the TOSHIBA eco Utility™ window.

Changing the main battery
When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery.
Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack and computer.
❖

Never expose a battery pack to abnormal shock, vibration or pressure. The battery pack's internal protective device could fail, causing it to overheat or ignite, resulting in caustic liquid leakage, or explosion or fire, possibly resulting in death or serious injury.

TECHNICAL NOTE: To avoid losing any data, save your files and then either completely shut down your computer or put it into
Hibernation mode before changing the main battery.

Mobile Computing

Changing the main battery

125

Removing the battery from the computer
To remove the battery:
1

Save your work.

2

Turn off the computer or place it in Hibernation mode according to the instructions in “Using and configuring
Hibernation mode” on page 90.

3

Unplug and remove any cables connected to the computer, including the AC adaptor.

4

Close the display panel and turn the computer upside down.

5

Slide the battery release lock to the unlocked position.

(Sample Illustration) Unlocking the battery release lock
6

Slide the battery release latch to release the battery.

7

Pull the discharged battery out of the computer.

(Sample Illustration) Removing the battery

126

Mobile Computing

Changing the main battery
If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury. Inserting a charged battery
To insert a battery:
1

Wipe the terminals of the charged battery with a clean cloth to ensure a good connection.

2

Insert the charged battery into the slot until the latch clicks.
The battery pack has been designed so that you cannot install it with reverse polarity.
If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position.

(Sample Illustration) Inserting the battery

Mobile Computing

Taking care of your battery
3

127

Slide the battery release lock to the locked position.

(Sample Illustration) Locking the battery release lock
4

Turn the computer right side up.

5

Reconnect any cables that were removed in step 3 of
“Removing the battery from the computer” on page 125.

6

Restart the computer.

Taking care of your battery
The following sections offer tips on how to take care of your battery and prolong its life.

Safety precautions
❖

If the battery pack produces an odor, overheats or changes color or shape while it is being used or charged, turn off the computer’s power immediately and disconnect the power cord/cable from the power socket. Carefully remove the battery pack from the computer.

❖

Do not try to disassemble a battery pack.

❖

Do not overcharge or reverse charge a battery. Overcharging will shorten its life, and reverse charging could damage it.

❖

Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to overheat and may cause damage to the battery or the computer.

❖

Do not incinerate a spent battery, as this could cause it to explode and release caustic liquid.

❖

If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery.

128

Mobile Computing

Taking care of your battery
❖

To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖

A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity.

❖

Charge the battery only in the computer or in a battery charger designated as an approved option.

❖

When you install the battery pack, you should hear a click when it is seated properly.

❖

Do not expose the battery pack to fire. The battery pack could explode. Maintaining your battery
Fully discharging your battery pack will allow better accuracy of the battery meter.
To fully discharge your battery pack:
❖

Periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below:
1
2

Disconnect the AC adaptor and turn on the computer’s power. If it does not turn on, go to step 4.

3

Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4.

4

Connect the AC adaptor to the computer and the power cord/cable to a power outlet. The DC-IN or AC power-light should glow white, and the battery light should glow amber to indicate that the battery pack is being charged. If the DC-IN or AC power-light indicator does not glow, power is not being supplied. Check the connections for the AC adaptor and power cord/cable.

5
❖

Turn off the computer’s power.

Charge the battery pack until the battery light glows white.

If you have extra battery packs, rotate their use.

Mobile Computing

Disposing of used batteries

129

❖

If you will not be using the system for an extended period, more than one month, remove the battery pack.

❖

If you are not going to use the computer for more than eight hours, disconnect the AC adaptor.

❖

Store spare battery packs in a cool dry place out of direct sunlight. Disposing of used batteries
The life of a battery pack depends on usage. When the battery pack needs replacing, the main battery light flashes amber shortly after you have fully recharged the battery.
You must discard a battery if it becomes damaged.
Never attempt to dispose of a battery pack by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven). Heat can cause a battery pack to explode and/or release caustic liquid, both which may possibly cause serious injury.
Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury.

Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User's Manual. Other battery packs have different voltage and terminal polarities. Use of non-conforming battery packs could generate smoke or cause fire or rupture, possibly resulting in serious injury.
After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under certain applicable laws and regulations, it may be illegal to dispose of old batteries by placing them in the trash.
Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777.

130

Mobile Computing

Traveling tips
In addition, Toshiba’s recycling initiatives include recycling programs, events and consumer promotions. For details, please visit www.laptops.toshiba.com/green. Toshiba is dedicated to preserving the environment by sponsoring
Call2Recycle™, a program of the Rechargeable Battery Recycling
Corporation. For more information and for drop-off locations, visit www.rbrc.org or call 1-800-822-8837.
Notice regarding CR coin cell batteries, applicable to California,
U.S.A. only:
Perchlorate Material - special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Traveling tips
The environmental precautions listed in “Selecting a place to work” on page 41, also apply while traveling.
❖

Never leave your computer on a sunny ledge or in a place where it could get wet or covered in dust.

❖

Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information or visit Toshiba’s Web site at accessories.toshiba.com. TECHNICAL NOTE: When traveling by air, you may be required to pass your computer through airport security equipment. The X-ray equipment will not harm your computer.

NOTE

Before using your computer aboard an aircraft, make sure the
Wireless antenna is OFF if your computer has wireless LAN capability. NOTE

To enable or disable wireless communication, use the Hot Key
Fn + F8. For more information see “Hot Keys/TOSHIBA Cards” on page 190.

Chapter 4

Exploring Your Computer’s
Features
In this chapter, you will explore some of the special features of your computer. Exploring the desktop
The desktop is the launching pad for everything you can do in the
Windows® operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system. The differences are not significant and do not indicate any change in the functionality of your system.

131

132

Exploring Your Computer’s Features

Exploring the desktop

Finding your way around the desktop
Your computer’s desktop includes several standard features: icons,
Start button, taskbar, notification area, and background pattern.

Icons

Start button

Taskbar

Notification area

(Sample Image) Windows® operating system desktop

Icons
An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area.
You may see various icons displayed on your system desktop, for example: Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin.

Exploring Your Computer’s Features

Exploring the desktop

133

❖ TECHNICAL NOTE: If you delete a large number of files or very large files from the internal storage drive, there may be insufficient space available in the Recycle Bin to hold these files.
In this case, Windows® will prompt you to either permanently delete the file(s) or cancel the deletion.
❖ If you delete a file (of any size) from an external media or flash media, it does not go into the Recycle Bin. The file is permanently deleted.
❖ Permanently deleted files cannot be recovered from the Recycle
Bin.
For more information on the Recycle Bin, see Windows® online
Help.

NOTE

If you place the pointer over an icon, a popup description of the file contents appears.

Your desktop may contain other icons depending on your configuration. See Windows® online Help for more specific information on each icon and how to use it.

Start button
You use the Start button to:
❖

Start programs

❖

Open documents

❖

Adjust system settings

❖

Find files

❖

Access Windows® Help and Support

❖

Suspend system activity and shut down the computer

NOTE

Whenever a procedure in this User’s Guide instructs you to click
Start, it means that you should click the Start button.

Taskbar
Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows. 134

Exploring Your Computer’s Features

Setting up for communications
To make a program or window the currently active one, click the associated taskbar button.

Notification area
The notification area displays icons of tasks or programs that run continuously in the background and displays notifications. To learn more about each task, position the pointer over the icon for a few moments and a short description of the task appears.
Typical tasks in the notification area are Current time, Power usage mode, network connectivity status, and speaker volume.
To activate a specific task, click the appropriate notification area icon. Setting up for communications
To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need:
❖

A browser or communications program

❖

An Internet Service Provider (ISP) or online service if you plan to use the Internet

❖

A way to connect to the ISP (for example modem/
Wi-Fi®/LAN, etc.)

Using Wireless LAN connectivity
NOTE

Wireless connectivity and some features may require you to purchase additional software, external hardware or services.
Availability of public wireless LAN access points may be limited.

Your system may come with an optional wireless LAN module.
This is a technology that expands wireless communication beyond networking equipment, and can connect many different kinds of electronic devices without the need for cables.
For information on how to set up a wireless connection, refer to your wireless networking device documentation or your network administrator. NOTE

To enable or disable wireless communication, use the Hot Key
Fn + F8. For more information see “Hot Keys/TOSHIBA Cards” on page 190.

Exploring Your Computer’s Features

Setting up for communications
NOTE

135

When the Wireless antenna is ON, the wireless indicator light be lit.

will

For help with common Wi-Fi® networking problems, see “Wireless networking problems” on page 179.

Connecting your computer to a network
You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.

Accessing a network
To access a network:
❖

At the office, connect an Ethernet cable to the Network port
(RJ45) on your computer. For specific information about connecting to the network, consult your network administrator.

❖

Many hotels, airports, and offices offer Wi-Fi® access. If your computer has Wi-Fi®, ask them for help when connecting to their Wi-Fi® network.

❖

While you are at home or traveling, you need a dial-up connection. Ask your network administrator for the telephone number of the network.

Setting up the connection
To set up an office connection, consult your network administrator for network settings and additional considerations.
To set up a dial-up connection, use the Connect to the Internet wizard: 1

Click Start, Control Panel, Network and Internet, and then under Internet Options, click Connect to the Internet.

2

Click Dial-up.

3

Enter the phone number and account information of your
Internet connection.

4

Click Connect and let the program dial the number.
The computer connects to the Internet.

136

Exploring Your Computer’s Features

Setting up for communications

Connecting a modem to a telephone line
(Available on certain models.)
Your computer may come with a built-in modem that can be connected to a standard voice-grade telephone line.
The modem allows you to:
❖

Access the Internet

❖

Communicate with your office’s local area network (LAN) or larger corporate wide area network (WAN)
For specific information about connecting to a LAN or WAN, consult your network administrator.

❖

Send a fax directly from your computer

Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
1

Plug one end of a telephone cable (purchased separately) into the modem port on the side of the computer.

(Sample Illustration) Connecting the telephone cable to the modem port 2

Connect the other end to the RJ-11 wall jack.

(Sample Illustration) Connecting to a wall jack

Exploring Your Computer’s Features

Exploring audio features
NOTE

137

Connect the built-in modem only to ordinary analog phone lines.
Never connect the built-in modem to a digital line (ISDN).
Never connect the built-in modem to the digital connector on a public telephone or to a digital private branch exchange (PBX).
Never connect the built-in modem to a key telephone system for residences or offices.
Connection to any communication line other than an analog phone line could cause a computer system failure.

Now you are ready to send a fax or use the modem to connect to an online service or the Internet.

Exploring audio features
You can use your computer to record sounds using the computer’s internal microphone (available on certain models) or an optional external microphone. You can listen to sound files or audio CDs using the built-in speakers, headphones, or external speakers.

Recording sounds
You may record sounds using the computer’s internal microphone
(available on certain models) or by connecting an optional external microphone. Using a microphone
1

If you want to use an external microphone, connect it to the computer. 2

Click Start, All Programs, Accessories, and then Sound
Recorder.

Start Recording/Stop Recording button

(Sample Image) Sound Recorder screen
3

Click the Start Recording button.

4

Speak normally into the microphone.

138

Exploring Your Computer’s Features

Using the Web Camera
5

When you have finished recording, click the Stop Recording button. The Save As dialog box appears.

6

To save the file, type a file name, and then click Save.

Using external speakers or headphones
Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
Before putting on headphones to listen, turn the volume down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.

TECHNICAL NOTE: When using amplified speakers, use speakers that require an external power source. Other types of speakers will be inadequate to produce sound from the computer.
To play back sound files through external speakers or headphones:
1

Locate the headphone jack on the computer.

2

Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone jack.
The headphone jack requires a 16-ohm stereo mini connector.

To adjust the volume:
❖

For external speakers, use the volume controls on each speaker.

❖

For headphones, use the computer’s volume control.

Using the Web Camera
(Available on certain models.)
Your computer may come with a built-in Web Camera. With this
Web Camera you can do the following:
❖

Take pictures and record videos with your computer

❖

Chat with others and have them see you while using instant messaging (IM) programs

❖

Have video conference calls

Exploring Your Computer’s Features

Using the Memory card reader
NOTE

139

To email, instant message or video conference, you must be connected to the Internet.

Depending on your computer model, the process of sending email, taking pictures or recording video messages may vary.
The Web Camera software, by default, should already be running.
The Web Camera indicator light glows when the Web Camera is active. For more information on the software, click Start, All
Programs, TOSHIBA, Utilities, and then Web Camera
Application Help.

Using the Memory card reader
(Available on certain models.)
The Memory card reader supports the use of Memory Stick®,
Memory Stick PRO™, Memory Stick PRO Duo™, Memory Stick
Duo™, Secure Digital™ (SD™), or MMC® (MultiMediaCard®) media. These media can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc.
To use a micro or mini SD™ Card, an SD™ adapter is required.

To avoid damaging your card or computer, never insert a Memory Stick
Duo™ or Memory Stick PRO Duo™ card without an adapter into the
Memory card reader. Compatibility is not guaranteed even with an adapter.
See your system’s Detailed Specifications for a compatibility list.
The Memory card reader may also support other types of media.
NOTE

Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the drag-and-drop feature of the
Windows® operating system.

140

Exploring Your Computer’s Features

Using the Memory card reader

Inserting memory media
The following instructions apply to all types of supported media devices. 1

Turn the media so that the contacts (metal areas) are face down.

2

Push the media into the adapter until it locks in place.

(Sample Illustration) Inserting memory media
When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data. Removing memory media
1

Prepare the card for removal by clicking on the Show hidden icons button ( ), if necessary, in the notification area and then selecting the Safely Remove Hardware and Eject Media icon. If the system is unable to prepare the media for safe removal, a message will tell you to try again later. If the media can be removed now, the system displays Safe to Remove Hardware.
If the computer has a spring-loaded adapter slot, see step 2; otherwise, skip to step 3.

2

Gently press the card inward to release it.
The card pops out slightly.

Exploring Your Computer’s Features

Using the eSATA/USB combo port
3

141

Grasp the card and pull it straight out.

(Sample Illustration) Removing memory media
Do not remove memory media while data is being written or read.
Even when the Windows® message “copying...” disappears, writing to the media might still be in progress and your data could be destroyed. Wait for the indicator light to go out.

Using the eSATA/USB combo port
(Available on certain models.)
Your computer includes an eSATA/USB combo port, which can be used with both eSATA (external Serial Advanced Technology
Attachment) devices and USB devices. The eSATA interface supports fast data transfer rates, which is especially useful for transferring and storing large files such as digital photo, music or video files. Like the USB interface, the eSATA interface supports hot swapping (connecting and disconnecting devices while the computer is on). eSATA devices require an external power source.

Chapter 5

Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs.
Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter.
NOTE

The utilities described in this chapter, and the icons shown in the sample images are applicable only if the related utility is available on your system.

❖
❖

TOSHIBA Application Installer

❖

Supervisor password

❖

User password

❖

TOSHIBA Face Recognition Utility

❖

TOSHIBA PC Diagnostic Tool Utility

❖

Mouse Utility

❖

TOSHIBA Hardware Setup

❖

TOSHIBA Zooming Utility

❖

142

TOSHIBA Assist

TOSHIBA Accessibility

Utilities

TOSHIBA Assist
❖

TOSHIBA eco Utility™

❖

TOSHIBA Service Station

❖

143

TOSHIBA PC Health Monitor

TOSHIBA Assist
The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings.
To access TOSHIBA Assist, click Start, All Programs,
TOSHIBA, Utilities, and then TOSHIBA Assist.
The TOSHIBA Assist window appears.

(Sample Image) TOSHIBA Assist window
The TOSHIBA Assist offers four categories of options:
❖
❖
❖
❖

Connect
Secure
Protect & Fix
Optimize

144

Utilities

TOSHIBA Assist

Connect
The feature available in this category is:
❖

Bluetooth® Settings

(Sample Image) TOSHIBA Assist window – Connect tab

Utilities

TOSHIBA Assist

Secure
The features available in this category are:
❖

Supervisor password

❖

User password

(Sample Image) TOSHIBA Assist window – Secure tab

145

146

Utilities

TOSHIBA Assist

Protect & Fix
The feature available in this category is:
❖

TOSHIBA PC Diagnostic Tool Utility

(Sample Image) TOSHIBA Assist window – Protect & Fix tab

Utilities

TOSHIBA Assist

Optimize
The features available in this category are:
❖

Mouse Utility

❖

TOSHIBA Hardware Setup (Hardware Settings)

❖

TOSHIBA Zooming Utility

❖

TOSHIBA Accessibility

❖

TOSHIBA Face Recognition Utility

❖

TOSHIBA eco Utility™

(Sample Image) TOSHIBA Assist window – Optimize tab

147

148

Utilities

TOSHIBA Application Installer

TOSHIBA Application Installer
The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications:
1

Click Start, All Programs, My Toshiba, and then TOSHIBA
Application Installer.

2

Click Next.

(Sample Image) TOSHIBA Application Installer screen
3

Click the item you want to install.

(Sample Image) TOSHIBA Application Installer selection screen
4

Click Install, then follow the on-screen prompts to complete the installation process.

Utilities

Setting passwords

149

Setting passwords
Setting a password lets you walk away from your computer while providing additional protection for your files. When you set a password, you must enter the password before you can work on your computer again.
TOSHIBA supports several types of passwords on your computer:
❖
NOTE

An instant password—Secures your open programs and files when leaving the computer temporarily.
You need to have created a password for your Windows® account to use an instant password.

❖

A power-on password—Prevents unauthorized users from starting the computer.

❖

A supervisor password—Prohibits unauthorized users from accessing certain functions such as TOSHIBA Hardware
Setup. This is useful if more than one person uses the computer. When setting up passwords, keep the following in mind:
❖

The user password can be set up under the supervisor password. ❖

The supervisor password must be set before the user password, or the user password must be deleted and then re-entered after the supervisor password is set.

Using an instant password
An instant password secures your system with a single keystroke.
Use this feature when you leave your desk for a few minutes and do not want to turn off the computer.
To use an instant password, press Fn + F1.
To unlock your system, press any key or touch the pointing device and the Windows® Logon screen will appear. Select your user name and enter your password, if any.

150

Utilities

Setting passwords

Using a supervisor password
A supervisor password prevents other users from changing hardware configuration options.

Setting a supervisor password
If you choose to set a supervisor or user password, TOSHIBA strongly recommends that you save your password in a location where you can later access it should you not remember it.
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer. To set a supervisor password:
1

Click Start, All Programs, TOSHIBA, Utilities, and then
TOSHIBA Assist.
The TOSHIBA Assist window appears.

2

On the left side, click the Secure tab.

3

Click the Supervisor Password icon.
The Supervisor Password tab of the TOSHIBA Password
Utility window appears.

(Sample Image) Supervisor Password tab
4

Click Registered.

5

Enter your password, and then enter it again to verify.

Utilities

Setting passwords
6

151

Click OK.
The supervisor password utility dialog box appears.

7

Select Able to run HWSetup or Unable to run HWSetup and then Click OK.

8

Restart the system to complete the process.

Deleting a supervisor password
To delete a supervisor password:
1

Click Start, All Programs, TOSHIBA, Utilities, and then
TOSHIBA Assist.
The TOSHIBA Assist window appears.

2

On the left side, click the Secure tab.

3

Click the Supervisor Password icon.
The Supervisor Password tab of the TOSHIBA Password
Utility window appears.

4

Click Not Registered.
A pop-up screen appears asking for a password.

5

Enter the password, then click OK.

6

Click OK to exit.

7

Restart the system to complete the process.

Using a user password
A user password provides power-on password protection.

Setting a user password
If you choose to set a supervisor or user password, TOSHIBA strongly recommends that you save your password in a location where you can later access it should you not remember it.
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer. 152

Utilities

Setting passwords
To register a password for the power-on password functions:
1

Click Start, All Programs, TOSHIBA, Utilities, and then
TOSHIBA Assist.
The TOSHIBA Assist window appears.

2

On the left side, click the Secure tab.

3

Click the User Password icon.

4

Click Registered.

5

Enter your password, and then enter it again to verify.

6

Click OK.

7

Click OK to exit.

Deleting a user password
To cancel the power-on password function:
1

Click Start, All Programs, TOSHIBA, Utilities, and then
TOSHIBA Assist.
The TOSHIBA Assist window appears.

2

On the left side, click the Secure tab.

3

Click the User Password icon.

4

Click Not Registered.

5

Follow the on-screen instructions to remove the user password.

Utilities

TOSHIBA Face Recognition Utility

153

TOSHIBA Face Recognition Utility
Your computer may come with the TOSHIBA Face Recognition utility. This utility provides another way to log on to your computer.
NOTE

For high security purposes, TOSHIBA Face Recognition is not a suitable substitute for Windows® passwords. To ensure the security of your system use your established Windows® passwords to log on.

Please refer to the online help file to learn more about this utility and what it offers. To locate the help file, go to: Start, All
Programs, TOSHIBA, Utilities, Face Recognition Help. The help file covers the following topics:
❖ Setting up a Face Recognition account
❖

Registering a user image

❖

Updating a user image

❖

Changing a user image

❖

Deleting a user image

❖

Configuring Settings

❖

Authentication Functions

Please note that some changes to the likeness of a registrant, such as hair style changes or wearing a cap or glasses, may affect the recognition rates when such changes occur after the registrant’s image has been registered.
TOSHIBA Face Recognition does not guarantee the correct identification of a user and may incorrectly recognize faces that are similar to the registrant’s. In addition, bright background light and or shadows may prevent a registrant from being recognized correctly. If recognition fails, log on to your computer using your
Windows® password.
TOSHIBA does not guarantee that the face recognition utility technology will be completely secure or error-free. TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.

154

Utilities

TOSHIBA PC Diagnostic Tool Utility

TOSHIBA PC Diagnostic Tool Utility
This utility can help diagnose problems with devices in your computer. Refer to the online Help documentation within the application for additional help.
NOTE

The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem.

To use the TOSHIBA PC Diagnostic Tool utility:
1

Click Start, All Programs, TOSHIBA, Utilities, and then
PC Diagnostic Tool, or click the PC Diagnostic Tool icon in the Protect & Fix tab of TOSHIBA Assist.
The TOSHIBA PC Diagnostic Tool window appears.

2

Click the Diagnostic Tool tab.

(Sample Image) TOSHIBA PC Diagnostic Tool window
3
NOTE

4

Select the devices that you would like to test by clicking the check box that appears to the left of the device.
Click the + (plus) and - (minus) symbols to expand and collapse the categories. Click Start Diagnostics when you are ready to begin the tests.

Utilities

Mouse Utility

155

Mouse Utility
The Mouse utility allows you to change your pointing device or mouse settings.
To access the Mouse utility:
1

Click Start, Control Panel, Hardware and Sound, and then under Devices and Printers, click Mouse, or click the Mouse icon in the Optimize tab of TOSHIBA Assist.
The Mouse Properties screen appears.
The settings you can change are divided into these categories:
❖

Buttons

❖

Pointers

❖

Pointer Options

❖

Wheel

❖

Hardware

❖

Device Settings

You may see additional categories depending on your particular pointing device.
2

Adjust the settings as desired, then click OK.

156

Utilities

TOSHIBA Hardware Setup

TOSHIBA Hardware Setup
TOSHIBA Hardware Setup is the TOSHIBA configuration management tool available through the Windows® operating system. To access it:
❖

Click Start, All Programs, TOSHIBA, Utilities, and then
HWSetup, or click the TOSHIBA Hardware Settings icon in the Optimize tab of TOSHIBA Assist.
The TOSHIBA HWSetup screen appears.

(Sample Image) TOSHIBA HWSetup screen – General tab options
The TOSHIBA HWSetup screen may have the following tabs:
❖

Boot Priority—Allows you to change the sequence in which your computer searches the drives for the operating system
You can also manually choose the Boot Priority by pressing the power button to power on the computer, then quickly pressing the F12 key.
Select the boot device by pressing the arrow keys, then pressing the Enter key.

NOTE

Since the system is a quick-booting system, you must press the keys immediately after pressing the power button.

Utilities

TOSHIBA Hardware Setup

157

❖

Display—Allows you to change various default settings for the built-in display

NOTE

When the computer restarts, it remembers the last configuration. If data does not appear on the display you are using after starting in
Sleep mode, press Fn + F5. For more information, see “Directing the display output when you turn on the computer” on page 82.

❖

General—Allows you to view the current BIOS version or change certain settings back to their default values

❖

Keyboard—Allows you to access the wake-on keyboard function ❖

LAN—Allows you to set networking functions

❖

Password—Allows you to set a user password

❖

USB—Allows you to enable or disable USB Legacy Emulation

158

Utilities

TOSHIBA Zooming Utility

TOSHIBA Zooming Utility
This utility allows you to select which applications will work with the zoom in/out hot keys (see “Zoom (Display resolution)” on page 203). You may select all applications or any subset of the following: ❖

Microsoft® Internet Explorer®

❖

Microsoft® Office

❖

Windows Media® Player

❖

Adobe® Acrobat® Reader®

❖

Icons on the desktop

To access the TOSHIBA Zooming Utility:
1

Click Start, All Programs, TOSHIBA, Utilities, and then
Zooming Utility.
The TOSHIBA Zooming Utility Properties screen appears.

(Sample Image) TOSHIBA Zooming Utility Properties screen
2 Select the desired option(s).
3 Click OK.
The zoom in and zoom out hot keys will now work with the applications you selected.
To zoom in, hold down the Fn key and press 2; to zoom out, hold down the Fn key and press 1.

Utilities

TOSHIBA Accessibility

159

TOSHIBA Accessibility
The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using
Accessibility lets you make the Fn key a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.

(Sample Image) TOSHIBA Accessibility window
To use TOSHIBA Accessibility:
1

Click Start, All Programs, TOSHIBA, Utilities, and then
Accessibility, or click the Accessibility icon in the Optimize tab of TOSHIBA Assist.
The TOSHIBA Accessibility window appears.

2

Check the Use Fn-StickyKey box.

3

Put a check mark next to the desired option.

4

Click OK.

160

Utilities

TOSHIBA eco Utility™

TOSHIBA eco Utility™
The TOSHIBA eco Utility™ monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time.
To access the TOSHIBA eco Utility™, do one of the following:
❖

Click Start, All Programs, TOSHIBA, Utilities, and then
TOSHIBA eco Utility.

❖

Double-click the TOSHIBA eco Utility icon in the notification area. ❖

Right-click the TOSHIBA eco Utility icon in the notification area and select Launch TOSHIBA eco Utility.

The TOSHIBA eco Utility™ window appears.

(Sample Image) TOSHIBA eco Utility™ window
To activate the TOSHIBA eco power plan, select ON in the upper-left section of the screen.
For more information on the TOSHIBA eco power plan and utility, click the Help button at the bottom of the window.

Utilities

TOSHIBA Service Station

161

TOSHIBA Service Station
The TOSHIBA Service Station helps you keep your new computer running at its best by notifying you when updated software, firmware, documentation or other information is available for your computer. The TOSHIBA Service Station will alert you when updates are available, and you can then choose to install the updates if you wish.

TOSHIBA PC Health Monitor
The TOSHIBA PC Health Monitor software program monitors computer system functions such as power consumption, the cooling system and the 3D Accelerometer (available on certain models). It alerts users to specific system conditions via pop-up messages. It also tracks the usage of the computer and related devices and logs service-relevant information on the computer's internal storage drive. The collected information includes device operation time and number of actuations or status changes (e.g.: number of power button and Fn key combination uses, and AC adaptor, battery, LCD, fan, HDD, sound volume, wireless communication switch, docking and USB information), date of initial system use, and also computer and device usage (e.g.: power settings, battery temperature and recharging, CPU, memory, backlight illumination time, and temperatures for various devices). The collected information is not limited to the examples specified here. The stored data uses a very small portion of the total hard disk capacity (approximately 3 MB or less per year).
This information is used to identify and provide a notification of system conditions that may affect the performance of your
TOSHIBA computer. It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA's authorized service providers. Additionally, TOSHIBA may use this information for quality assurance analysis.
Subject to the use restrictions above, the data logged on the internal storage drive may be transferred to entities located outside of your country or region of residence (e.g., European Union). Those countries may or may not have the same data protection laws or data protection levels as required by your home country or region.

162

Utilities

TOSHIBA PC Health Monitor
You may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via the Windows® Control Panel. Doing so will automatically delete all collected information from the internal storage drive.
The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its standard limited warranty in any way. TOSHIBA's standard limited warranty terms and limitations apply.

Chapter 6

If Something Goes Wrong
Some problems you may encounter when using your computer are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter.
If all else fails, contact Toshiba. You will find information on
Toshiba’s support services at the end of this chapter.

Problems that are easy to fix
Your program stops responding.
If you are working with a program that suddenly freezes all operations, chances are the program has stopped responding. You can exit the failed program without shutting down the operating system or closing other programs.
To close a program that has stopped responding:
1

Press Ctrl, Alt, and Del simultaneously (once), then click Start
Task Manager.
The Windows® Task Manager window appears.

163

164

If Something Goes Wrong

Problems when you turn on the computer
2

Click the Applications tab.
If a program has stopped responding, the words “not responding” appear beside its name in the list.

3

Select the program you want to close, then click End Task.
Closing the failed program should allow you to continue working. If it does not, continue with the next step.

4

Close the remaining programs one by one by selecting the program name, then End Task.
Closing all programs should allow you to continue working. If it does not, power off your computer and then restart it.

Problems when you turn on the computer
These problems may occur when you turn on the power.

The computer will not start.
Make sure you attached the AC adaptor and power cord/cable properly or installed a charged battery.
Press and hold the power button for at least 10 seconds.
If you are using the AC adaptor, check that the wall outlet is working by plugging in another device, such as a lamp.
Verify that the computer is on by looking at the ON/OFF indicator.
If the indicator is glowing, the computer is on. Also, try turning the computer off and then on.
If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.

The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
Your computer may be in Sleep mode and have a software or resource conflict. When this happens turning the power on returns you to the problem instead of restarting the system. To clear the condition, press Ctrl, Alt, and Del simultaneously. Then shut down the computer via software, or follow the steps if your program stops responding (see “Problems that are easy to fix” on page 163).

If Something Goes Wrong

Problems when you turn on the computer

165

The computer displays the WARNING RESUME FAILURE/Windows Error
Recovery – Windows did not shut down successfully message.
To continue, select Start Windows normally. This can happen if the computer was put into Sleep mode and the battery has discharged. If you performed a shutdown before this message was displayed, a program or driver may have prevented Windows® from shutting down.
Data stored in the computer’s memory has been lost. Data stored in the computer’s internal storage drive may not be affected.
Always save your data even when you are using Sleep mode. If your battery fully discharges, information that has not been saved will be lost. Your computer can be configured to warn you when the battery is running low see “What to do when the main battery runs low” on page 120.
If you are running on battery power, it is recommended that you do not leave the computer in Sleep mode for long periods of time.
To charge the battery, leave the computer plugged into a live wall outlet for several hours. For more information see “Charging batteries” on page 116.

The AC power light is blinking.
If the AC power light is blinking, try the following steps:
1

Cut off power to the computer by disconnecting the AC adaptor and removing the battery. The error condition will be interrupted, and the AC power light will stop flashing.

2

Put the battery back into the computer. Do not connect the AC adaptor. Try turning the computer on again.
If the computer starts normally, the AC adaptor may be defective and will need to be replaced.
If the AC power light starts flashing, remove the battery, and continue with the steps below.

3

Connect the AC adaptor to the computer. Leave the battery out of the computer. Try turning the computer on again.
If the computer starts normally, the battery may need charging, may be depleted, or may be defective. Turn the computer on, insert the battery, and then leave the computer running for several hours, which will deliver a slow, steady
“trickle-charge” to the battery. Once the battery has been trickle-charged, it may begin working correctly again.

166

If Something Goes Wrong

The Windows® operating system is not working
If the trickle-charging does not prove effective, visit the
Toshiba Web site at pcsupport.toshiba.com and see the Support
Bulletin Step-Charging the computer’s battery (click the
Ask Iris® link and search for the support bulletin by name).
4

Connect the AC adaptor to a different power outlet, preferably in a different room. If the computer starts normally, there may be a problem with the AC outlet itself, or the voltage level available from it.

5

Verify that the AC adaptor is the correct unit for your computer model. The computer may not be able to start from an AC adaptor that is rated for less current (amperage) than the computer requires, even if the rated voltage is correct, and the plug fits correctly in the DC-IN socket. The labels on the bottom of the computer and the AC adaptor show the specifications for voltage ("V") and current ("A") for each device. The voltage level must match exactly. The amperage rating of the AC adaptor must be equal to or greater than that required by the computer.

The battery light is blinking when the computer is on.
If the battery light is blinking when the computer is on, this indicates a power mismatch. Do the following:
1

Check the OUTPUT specifications on the AC adaptor
(for example, DC 19V – 3.95A)

2

Check the INPUT specifications on the bottom of the computer. The output specifications of the AC adaptor must match the input specifications of the computer.

3

If the specifications do not match, locate and use the AC adaptor that shipped with your computer. If the specifications do match, contact Toshiba. See “Contacting Toshiba” on page 187.

The Windows® operating system is not working
Once you are familiar with the desktop and used to the way the operating system responds to your work routine, you can easily detect if the operating system is not working correctly. For example: ❖

The operating system fails to start after the initial startup appears. ❖

The operating system takes a long time to start.

If Something Goes Wrong
®

The Windows operating system is not working

167

❖

The operating system responds differently from the normal routine. ❖

The screen does not look right.

Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device.
If you experience any of these problems, use the options in the
Startup menu to fix the problem.

Using Startup options to fix problems
If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
To open the Startup menu:
1

Restart your computer.

2

Press F8 when your computer starts and before Windows® starts loading. The Windows® Advanced Boot Options menu displays these options: ❖

Repair Your Computer

❖

Safe Mode

❖

Safe Mode with Networking

❖

Safe Mode with Command Prompt

❖

Enable Boot Logging

❖

Enable low-resolution video (640 x 480)

❖

Last Known Good Configuration (advanced)

❖

Directory Services Restore Mode

❖

Debugging Mode

❖

Disable automatic restart on system failure

❖

Disable Driver Signature Enforcement

❖

Start Windows® Normally

When you highlight each option using the arrow keys, Windows® displays information about each option at the bottom after
Description.
See your Windows® documentation for further explanation.

168

If Something Goes Wrong

The Windows® operating system is not working

NOTE

If your computer is connected to a network, the Startup menu may display different versions of Safe mode.

Internet problems
My Internet connection is very slow.
Many factors contribute to the speed with which you can surf the
Internet. They include: network speed, network conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access. If accessing a particular site is very slow, try later.

My browser cannot find the URL address I typed in.
Make sure you separated the domain names of the address with the forward slash (/). Check the spelling of each name and the syntax of the address carefully. A single incorrect letter or missed character will make it impossible for your browser to locate the site.

My browser cannot find a site I bookmarked.
The World Wide Web is constantly changing. A site you bookmarked yesterday may not be available today or its server may be down for temporary repair. Try again later.

The Windows® operating system can help you
If the operating system has started properly but you still have a problem using your computer, the online Help can assist you in troubleshooting the problem.
To access the Windows® operating system Help and Support:
1

Click Start, then click Help and Support, or press F1.
The Help and Support window appears.

2

Then do one or both of the following:
❖

In the Search programs and files field, type in the topic for which you need help and follow the on-screen instructions.

❖

Click one of the options listed in the window and then follow the on-screen instructions.

You can connect to Support Online by clicking the Ask button and then clicking Microsoft Customer Support or by going to Toshiba support at pcsupport.toshiba.com.

If Something Goes Wrong

Fixing a problem with Device Manager

169

Fixing a problem with Device Manager
Device Manager provides a way to check and change the configuration of a device.
Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.

Checking device properties
Device Manager provides a way to view the properties of a device.
Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties:
1

Click Start, Control Panel, System and Security, and then under System, click Device Manager.

2

To view the device(s) installed, double-click the device type.

3

To view the properties, double-click the device.
The operating system displays the device Properties dialog box, which provides an array of tabs. They may include:
❖

The General tab, which provides basic information about the device.

❖

The Resources tab, which lists resources assigned to the device. This tab does not appear if the device is not using resources. ❖

The Driver tab, which displays the drivers being used by the device. This tab also provides options for updating the driver or rolling back the driver in case the new version is causing a problem.

The tabs that appear in the dialog box vary from one device to another. For more information about Device Manager, refer to Windows® online Help.

170

If Something Goes Wrong

Memory problems

Memory problems
Incorrectly connected or faulty memory modules may cause errors that seem to be hardware or even software related. It is worthwhile checking for these first:
1

Click Start, and then click the Shut down button in the lower-right corner of the Start menu.
The computer shuts down completely.

2

Remove the memory module, following the instructions in
“Removing a memory module” on page 57.

3

Reinstall the memory module, following the instructions in
“Installing a memory module” on page 51, and making sure the module is seated properly.

4

Check for the error again.

5

If the error recurs, remove the memory module entirely and check for the error again.
If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.

NOTE

For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.

Power and the batteries
Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery, optional secondary battery, and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adaptor or power cord/cable will neither power the computer nor recharge the batteries. Here are some typical problems and how to solve them:

The AC power light does not come on when you plug in the
AC adaptor and power cord/cable.
Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer.

If Something Goes Wrong

Power and the batteries

171

If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.

The AC adaptor and power cord/cable work correctly, but the battery will not charge.
The battery does not charge while the computer is consuming full power. Try turning off the computer.
The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery. See “Removing the battery from the computer” on page 125.
The battery may be too hot or too cold to charge properly. If you think this is the probable cause, let the battery reach room temperature and try again.
If the battery has completely discharged, it will not begin charging immediately. Leave the AC adaptor and power cord/cable connected, wait 20 minutes and see if the battery is charging.
If the battery light is glowing after 20 minutes, let the computer continue charging the battery for at least another 20 minutes before you turn on the computer.
If the battery light does not glow after 20 minutes, the battery may have reached the end of its useful life. Try replacing it.

The battery appears not to power the computer for as long as it usually does.
If you frequently repeat shallow charge and discharge, the battery meter may become inaccurate. Let the battery discharge completely, then try charging it again.
Check the power options via your Power Plans (see “Power Plans” on page 122). Have you added a device, such as a memory module, that takes its power from the battery? Is your software using the internal storage drive more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts.
After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com. Refer to this site often to stay current on the most recent software and hardware options for your computer, and for other product information.
For more information on maintaining battery power, see “Charging batteries” on page 116.

172

If Something Goes Wrong

Keyboard problems

Keyboard problems
NOTE

To capture a print screen of the entire screen, press the
Fn + PRTSC key.
To capture only the active window displayed, press Fn + ALT while simultaneously pressing the PRTSC key.

If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.

You have connected an external keyboard and the operating system displays one or more keyboard error messages.
You may need to update your keyboard driver. Refer to the documentation that came with the keyboard or to the keyboard manufacturer's Web site.
The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard.

Display problems
Here are some typical display problems and their solutions:

The screen is blank.
Display Auto Off may have gone into effect. Press any key to activate the screen.
You may have activated the instant password feature by pressing
Fn and F1 simultaneously. If you have registered a password, press any key, type the password and press Enter. If no password is registered, press any key. The screen reactivates and allows you to continue working.
If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, press Fn and F5 simultaneously (once). If this does not correct the problem, press
Fn and F5 simultaneously again to return the display priority to its previous setting.
HINT: Holding the Fn key and pressing the F5 key several times will advance you through the display options.
If you are using an external monitor:
❖

Check that the monitor is turned on.

If Something Goes Wrong

Display problems

173

❖

Check that the monitor’s power cord/cable is firmly plugged into a working power outlet.

❖

Check that the cable connecting the external monitor to the computer is firmly attached.

❖

Try adjusting the contrast and brightness controls on the external monitor.

❖

Press Fn and F5 simultaneously to make sure the display priority is not set for the built-in screen.

The screen does not look correct.
You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking
Personalize. This opens the Personalization window. Choose a theme for your desktop background, under Colors, Sounds, and
Screen Saver, or change the settings for each of these components individually. Click Display and then Change display settings to choose the screen resolution.
For more information, see the Windows® online Help.

A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware.
Reduce the size of the color palette to one that is supported by the computer’s internal display.
To change the display properties:
1

Right-click in a blank area of the Windows® desktop.

2

Click Personalize, and then Display.

3

Adjust the screen resolution and/or color quality.

4

Click OK.

The display mode is set to Simultaneous and the external display device does not work.
Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.

Small bright dots appear on your TFT display when you turn on your computer.
Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear

174

If Something Goes Wrong

Disk or storage drive problems on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate. This is also an intrinsic characteristic of the screen technology. When the computer is operated on battery power, the screen will dim and you may not be able to increase the brightness of the screen while on battery power.

Disk or storage drive problems
Problems with the storage drive or with an external media drive usually show up as an inability to access the drive or as sector errors. Sometimes a drive problem may cause one or more files to appear to have garbage in them. Typical problems are:

You are having trouble accessing a drive, or one or more files appear to be missing.
Make sure you are identifying the drive by its correct name
(A: or C:).

Error-checking
NOTE

This feature is not available for optical disc drives.

Run Error-checking, which analyzes the directories and files on the storage drive and repairs any damage it finds.
To run Error-checking:
1

Click Start, and then Computer.

2

Right-click the drive you want to check.

3

On the pop-up menu, click Properties.
The drive’s Properties box appears.

4

Click the Tools tab.

5

Click the Check now... button.
The Check Disk box appears.

6

You can choose one or both options:
❖
❖

7

Automatically fix file system errors
Scan for and attempt recovery of bad sectors

Click Start.
Error-checking tests and repairs the storage drive.

If Something Goes Wrong

Optical disc drive problems

175

Your hard disk seems very slow.
If you have been using your computer for a long time, your files may have become fragmented. Run Disk Defragmenter.
To do this, click Start, All Programs, Accessories, System Tools, and then Disk Defragmenter. After it opens, click Defragment disk. Your data files are damaged or corrupted.
Refer to your software documentation for file recovery procedures.
Many software packages automatically create backup files.
You may also be able to recover lost data using utility software.
Consult your network administrator.

Some programs run correctly but others do not.
This is probably a configuration problem. If a program does not run properly, refer to its documentation and check that the hardware configuration meets its needs.

Optical disc drive problems
You cannot access a disc in the drive.
If the optical disc drive is an external drive, make sure the two USB cables or the AC adaptor cable are properly connected to the computer and refer to the documentation that came with your drive.
Make sure the tray that holds the optical disc is closed properly.
Press gently until it clicks into place.
Open the tray and remove the disc. Make sure the tray is clean. Any dirt or foreign object can interfere with the laser beam.
Examine the disc to see if it is dirty. If necessary, wipe it with a clean cloth dipped in water or a neutral cleaner.
Replace the disc in the tray. Make sure that the disc is lying flat, label side up. Close the tray carefully, making sure it has shut completely. You press the disc eject button, but the drive tray does not slide out.
Make sure the computer is connected to a power source and turned on. The optical disc drive eject mechanism requires power to operate. Make sure a program is not accessing the drive and preventing it from ejecting.

176

If Something Goes Wrong

Optical disc drive problems
If you need to remove a disc and cannot turn on the computer (for example, if the battery is completely discharged), use a narrow object, such as a straightened paper clip, to press the manual eject button. This button is in the small hole next to the optical disc drive eject button on the face of the optical disc drive tray.
Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.

Some discs run correctly but others do not.
Check that the type of disc you are using is compatible with your optical disc drive. For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at pcsupport.toshiba.com.
If the problem is with an optical data disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.

The disc will not come out of the drive when you click the eject button on the screen.
Press the button on the optical disc drive itself. For additional information see “You press the disc eject button, but the drive tray does not slide out.” on page 175.

High Definition content via the Blu-ray Disc™ is not displaying properly.
Make sure you are using an HDCP (High-Bandwidth Digital
Content Protection) HDMI™ cable. If viewing High Definition content on an external monitor, your system may not support this function. For more information, see “Viewing Blu-ray Disc™ movies” on page 107.

Online content accessed through the Blu-ray Disc™ is not displaying. Make sure you are connected to the Internet.

While viewing a Blu-ray Disc™ movie the sound is not coming from the computer's speakers.
You can change the destination of the audio signal in Sound properties in the Control Panel.

If Something Goes Wrong

Optical disc drive problems
NOTE

177

Blu-ray Disc™ player Technology.
Compatibility and/or performance issues are possible. Certain interactive features may not be supported due to compatibility, network settings or other conditions. Advanced Access Content System (AACS) keys are integrated into your computer for copy protection purposes. Occasional renewal is required and will initially be provided at no charge. After the initial period, Corel Corporation will provide AACS key renewals pursuant to its then current terms and conditions. For more information on AACS key, visit www.aacsla.com/home.
❖ Depending on BD content, you may experience "frame dropping" or lower performance. Viewing on an external display requires an RGB/HDCP supported HDMI™ port. External power is required for viewing BD content. Dual view feature is not supported. You must close all other applications during BD playback. ❖ BD player does not support DVD playback. Please use Windows
Media® player or "TOSHIBA DVD Player" for DVD playback.
❖ BD playback feature support may vary with each BD. Please contact content publisher directly with any questions.
❖ Do not play a Blu-ray Disc™ when recording a TV program, whether live or pre-scheduled. Doing so may cause Blu-ray
Disc™ playback or television program recording errors.
❖ While playing a BD-J title, keyboard short-cut and resume play functions are not supported.
❖ BD player does not support HD DVDs. Blu-ray Discs™ with high definition content is required for HD viewing.
❖ Do not place your computer in sleep or hibernate mode while the
Blu-ray Disc™ player is running.
❖ The region code of your BD (video) must match the region code of your BD player. Otherwise, the BD will not play properly.
Region codes can be set from the BD software that came with your computer.
❖ Make sure to connect your computer's power cord/cable to a live electrical outlet via the AC Adaptor when playing a BD, otherwise, Blu-ray Disc™ playback may not operate smoothly.

178

If Something Goes Wrong

Sound system problems

Sound system problems
No sound is coming from the computer’s speakers.
Adjust the volume control.
Try pressing Fn + Esc to see if volume mute is disabled.
Check that the volume control on the computer is turned up.
If you are using external headphones or speakers, check that they are securely connected to your computer.

The computer emits a loud, high-pitched noise.
This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control. Modem problems
(Available on certain models.)
This section lists common modem problems.

The modem will not receive or transmit properly.
Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack. Check the communications parameters (baud rate, parity, data length and stop bits) specified in the communications program. It should be set up to transmit at 300, 1200, 2400, 4800, 9600, 14400,
28800, 33600 bps (bits per second) or higher.

The modem is on, set up properly but still does not transmit or receive data.
Make sure the line has a dial tone. Connect a telephone handset to the line to check this.
The other system may be busy or off line. Try making a test transmission to someone else.
For more information regarding your system’s V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com.

If Something Goes Wrong

Wireless networking problems

179

Wireless networking problems
NOTE

This section provides general troubleshooting tips for networking problems, specifically wireless (Wi-Fi®) networking.
The terms and concepts used assume a basic understanding of networks, and may be for more advanced users. If you need assistance or if you are not familiar with the terminology, please see
Windows® Help and Support or contact your computer technician.

❖

If your computer is equipped with an internal Wi-Fi® adapter, verify that the Wireless antenna is ON (the wireless indicator light will be lit).

❖

Verify that your computer can detect access points or routers. If it can detect a Wi-Fi® access point or router then it may be a configuration issue.

❖

Verify that signal strength is good using the utility provided with the Wi-Fi® adapter.

❖

If another computer is on the same network, verify that it has network access, and can connect to the Internet. If, for example, the other computer cannot browse to a public Web site, the ISP’s (Internet Service Provider) service may be disrupted. ❖

Verify that the Service Set Identifier (SSID), or network name, is correct—i.e., that it matches the SSID assigned to the access point you are attempting to connect through. SSIDs are case-sensitive. ❖

Check the Windows® Control Panel's Device Manager to verify that the Wi-Fi® adapter is recognized by the Windows® operating system, and that the driver is loaded. To access the
Device Manager, click Start, Control Panel, System and
Security, and then System. Carefully note any error messages—these will be very helpful if you should confer with a support technician at a later time.

NOTE

To enable or disable wireless communication, use the Hot Key
Fn + F8. For more information see “Hot Keys/TOSHIBA Cards” on page 190.

180

If Something Goes Wrong

DVD and BD operating problems
❖

Use IPCONFIG to verify that the computer has a useful IP address—one other than the private address of
169.254.xxx.xxx assigned by Windows®.
1

Click Start to open the Start menu.

2

Type Cmd in the Search programs and files field.

3

Enter IPCONFIG /ALL and press Enter.

The IP address for each active network adapter will be displayed. ❖

Connect your computer directly to your router or broadband modem, by plugging a standard CAT5 Ethernet patch cable
(sold separately) into your computer's RJ45 Ethernet port. If your connection problem disappears, the problem lies in the
Wi-Fi® part of your network.

❖

If you have enabled any security provisions (closed system,
MAC address filtering, Wired Equivalent Privacy [WEP], etc.), check the access point vendor's Web site for recent firmware upgrades. Problems with WEP keys, in particular, are frequently addressed in new firmware releases.

The Windows® operating system wireless management utility does not work.
If you are using an external Wi-Fi® adapter (a USB adapter or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows® operating system wireless management utility, in which case you must use the adapter's management utility. If the documentation that accompanies the adapter does not provide enough information to determine if this is the case, contact that vendor's support group for further advice.

DVD and BD operating problems
If you experience a problem playing DVDs or BDs, you may be able to fix the problem yourself.
For general problems playing a DVD or BD title, try the following steps: 1

Verify that the disc is in a format that the drive supports.

2

Ensure that the disc is properly inserted in the drive tray.

3

Use the DVD or BD player software that came with your computer to view DVD or BD movies.

If Something Goes Wrong

Develop good computing habits
4

181

Clean the disc and try again.
A dirty drive can also cause audio problems. If you have tried several discs and all fail, consider sending your drive to an authorized service provider to get it cleaned.

5

Verify that your computer recognizes your optical disc drive by clicking Start, and then Computer. The optical disc drive should appear in the list.

6

See “Checking device properties” on page 169for instructions on using Device Manager to view the optical disc drive properties. 7

Check the Toshiba Web site for new information on optical disc drives and their operation.

A blank screen appears while watching a DVD-ROM or BDROM movie or title.
Change the setting for when to turn off the display using the following steps:
1

Click Start, Control Panel, System and Security, and then
Power Options.

2

Click Choose when to turn off the display in the left pane.

3

To turn off the display, select Never in the drop-down lists.

4

Click Save changes.

The screen saver runs while you are watching a movie or title.
If the screen saver is enabled, it runs on top of any movie or title you are watching. To disable the screen saver:
1

Right-click on the desktop and click Personalize in the menu.

2

Click Screen Saver in the lower-right corner of the window.

3

Select None from the Screen saver drop-down list.

4

Click OK.

Develop good computing habits
Save your work frequently.
You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips” on page 97 for instructions.

182

If Something Goes Wrong

Develop good computing habits

On a regular basis, back up the information stored on your internal storage drive.
Use Windows® to back up files, or the entire computer, to an optical disc, or external hard disk. Here are some ways you can do this:
❖

Use the Windows® operating system to back up files or your entire computer to an optical disc, or external hard disk.

❖

Copy files to a rewritable external storage device.

❖

Connect your computer to the office network and copy files to your network partition.

Some people use a combination of these methods, backing up all files to tape weekly and copying critical files to external media on a daily basis.
If you have installed your own programs, you should back up these programs as well as your data files. If something goes wrong that requires you to reformat your internal storage drive and start again, reloading all your programs and data files from a backup source will save time.

Read the user’s guides.
It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together.
Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self-help books you can use to supplement the information in the manuals.

Data and system configuration backup in the Windows® operating system The Windows® operating system offers some easy-to-use features for backing up your Windows® settings and your data—documents and other important files. Take advantage of these features to protect yourself from much more difficult and time-consuming restoration procedures, and to safeguard your valuable data from loss. If Something Goes Wrong

Develop good computing habits

183

Saving system configuration with restore points
The System Restore feature of the Windows® operating system quickly creates restore points—‘snapshots’ of your Windows® operating system configuration—and saves them for later recall. If you experience problems after installing some new hardware or software, you can easily select a previously established Control
Point to ‘turn back the clock,’ restoring the Windows® operating system to the state it was in just prior to the installation. This is much easier and more effective than uninstalling the hardware or software, which often leaves behind unwanted files and settings. It is also easy to undo a restore point selection, if you change your mind. Follow these steps to create a restore point using the System
Restore utility:
1

Click Start, Control Panel, System and Security, and then
System.

2

In the left pane, click System protection.
The System Protection tab of the System Properties window appears. 3

Click Create...

4

In the input field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing
Brand X Accounting app.” Then click Create.
The Windows® operating system creates the restore point, automatically stamps it with the current date and time, and displays a message that the restore point was successfully created. 5

Click Close.

Then, at a later time, you can re-establish your Windows® configuration using the saved restore point. To do this:
1

Click Start, All Programs, Accessories, System Tools, and then System Restore.

2

Select Recommended restore or Choose a different restore point, and then click Next.
The timestamp and description of each restore point is displayed. 184

If Something Goes Wrong

Develop good computing habits

NOTE

This list may contain restore points that you did not create. Restore points labeled System Checkpoint were automatically created by the
Windows® operating system. Other restore points may have been created automatically by applications when they were installed.

3

If you selected Choose a different restore point in step 2, select the restore point you want to use, and then click Next.

4

Verify that the restore point you selected is the correct one. If it is not, click Back to return to the previous step.

5

Close all programs and save all open files.

6

Click Finish, and then Yes to begin the system restore.
Your Windows® operating system configuration will now be restored to the state it was in when the chosen restore point was created, and then the computer will be automatically restarted.

Backing up your data or your entire computer with the
Windows® operating system
The most valuable component of your computer system is the data you create and store on its internal storage drive. Since problems with either hardware or software can make the data inaccessible or even destroy it, the next most valuable component of your computer system may be a recent backup of your data.
Fortunately, the Windows® operating system offers a convenient way to back up your computer or just your important files to optical disc drives, or hard drives. An external hard drive is recommended in case the internal storage drive fails. No additional software is required. Most of the optical disc drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from optical discs. External optical disc writers are also widely available. Follow these steps to back up your computer or files to optical discs, or a storage drive:
NOTE

You cannot back up the computer while running on battery power.
Connect the AC adaptor before continuing.

1

Prepare your backup target by connecting it and/or inserting a blank optical disc in the drive.

2

Click Start.

3

Click Control Panel.

If Something Goes Wrong

Develop good computing habits
4

185

Click Back up your computer under the System and
Security heading. Follow the on-screen instructions to back up your files.

For more help, click Start, Help and Support, and search for
“back up files.”

General tips for installing hardware and software
Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft®
Office and Adobe® Photoshop®, or utility software such as special toolbars for your web browser).
❖

Create a restore point (refer to “Saving system configuration with restore points” on page 183). Before installing anything, use the System Restore utility to set a restore point (see the section titled restore points). If anything goes wrong, you will then be able to easily restore the Windows® operating system to the state it was in prior to the installation, undoing any changes that the installation process introduced.

❖

Back up your critical data (see “Backing up your data or your entire computer with the Windows® operating system” on page 184).

❖

Have your back up DVD(s) on hand in case you need any files from them.

❖

Do not guess—follow directions carefully! It is often necessary to run an installation utility first—before connecting a new hardware item to the computer. If the device is connected first, it may be very difficult to complete the installation successfully. Always carefully follow the installation instructions that accompany the hardware or software.

❖

Restart the Windows® operating system. Always restart the
Windows® operating system after each installation, even if the installation utility does not prompt you to do so. This will ensure that the installation is completed, and will clean up anything that the installation utility left behind.

❖

Do one installation at a time. If you have several new items to add to your computer system, install just one at a time, creating restore points immediately before each successive installation.
This will make it much easier to determine the origin of any new problems. For best results, follow this sequence:
1

Back up critical data.

2

Create a restore point.

186

If Something Goes Wrong

If you need further assistance
3

Install one item of hardware or software.

4

Restart the Windows® operating system.

5

Use the new hardware or software for a while, noting any new problems. Make sure that your critical applications
(email, business applications, etc.) are working correctly, and verify that important devices are still functioning.

6

For each additional hardware or software item, repeat these steps, starting at step 1 if any of your critical data has changed, or starting at step 2 if no critical data has changed. The eSATA device is not recognized from Sleep or
Hibernation mode.
A connected eSATA device may not be recognized if it is connected to the computer’s eSATA/USB combo port (available on certain models) while the computer is in Sleep or Hibernation mode. If this occurs, disconnect the eSATA device and then reconnect the device while the computer is turned on.
NOTE

Before connecting the eSATA device to your computer and external power source, read the documentation that came with the device and follow the manufacturer’s instructions.

If you need further assistance
If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance.
This section contains the steps to take to ask for help.

Before you contact Toshiba
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first.
Try the following before you contact Toshiba:
❖

Review the troubleshooting information in your operating system documentation.

❖

If the problem occurs while you are running a program, consult the program’s documentation for troubleshooting suggestions.
Contact the software company’s technical support group for their assistance.

If Something Goes Wrong

If you need further assistance
❖

187

Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. For the detailed specifications for your computer, visit pcsupport.toshiba.com. Click Product Support, search for your model, and then click Detailed Specs.

Contacting Toshiba
If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. Toshiba’s Technical Support Web site
For technical support, or to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. Toshiba voice contact
Before calling Toshiba, make sure you have:
❖

Your computer’s serial number

❖

The computer and any optional devices related to the problem

❖

Backup copies of your Windows® operating system and all other preloaded software on your choice of media

❖

Name and version of the program involved in the problem along with its installation media

❖

Information about what you were doing when the problem occurred ❖

Exact error messages and when they occurred

For technical support, call the Toshiba Customer Support Center:
Within the United States at (800) 457-7777
Outside the United States at (949) 859-4273

188

If Something Goes Wrong

Other Toshiba Internet Web sites

Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site

laptops.toshiba.com

Marketing and product information in the USA

accessories.toshiba.com

Accessories information in the USA

www.toshiba.ca

Canada

www.toshiba-Europe.com

Europe

www.toshiba.co.jp/index.htm

Japan

pcsupport.toshiba.com

Mexico and all of Latin America

acclaim.toshiba.com

Toshiba USA Self-Service support web site laptopforums.toshiba.com

Community discussion forums for
Toshiba laptop users

Toshiba’s worldwide offices
Australia
Toshiba (Australia) Pty. Limited
84-92 Talavera Road
North Ryde NSW 2113
Sydney
Australia

Canada
Toshiba Canada Ltd.
191 McNabb Street
Markham, Ontario
L3R - 8H2
Canada

France
Toshiba Systèmes (France) S.A.
7, Rue Ampère; B. P. 131
92800 Puteaux Cédex
France

Germany
Toshiba Europe GmbH
Leibnizstraße 2
D-93055 Regensburg
Germany

Italy
Centro Direzionale Colleoni
Palazzo Perseo
Via Paracelso 10
20041, Agrate Brianza
Milano, Italy

Japan
Toshiba Corporation, PCO-IO
1-1, Shibaura 1-Chome
Minato-Ku, Tokyo, 105-8001
Japan

If Something Goes Wrong

Toshiba’s worldwide offices
Latin America and Caribbean
Toshiba America Information
Systems
9740 Irvine Blvd.
Irvine, California 92618
USA

189

Mexico
Toshiba de México S.A. de C.V.
Sierra Candela No.111, 6to. Piso
Col. Lomas de Chapultepec.
CP 11000 Mexico, DF.

800-457-7777 (within the US)
949-859-4273 (outside of the US this call may incur long-distance charges) Spain
Toshiba Information Systems
(España) S.A.
Parque Empresarial San Fernando
Edificio Europa, 1a Planta
Escalera A
28831 (Madrid) San Fernando de
Henares
Spain

United Kingdom
Toshiba Information Systems
(U.K) Ltd.
Toshiba Court
Weybridge Business Park
Addlestone Road
Weybridge, Surrey KT15 2UL
United Kingdom

United States
Toshiba America Information
Systems, Inc.
9740 Irvine Boulevard
Irvine, California 92618
United States

The Rest of Europe
Toshiba Europe (I.E.) GmbH
Hammfelddamm 8
D-4-1460 Neuss
Germany

For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.

Appendix A

Hot Keys/TOSHIBA Cards
Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications.
There are two types of TOSHIBA Cards: Hot Key Cards and
Application Cards.

Hot Key Cards
The Hot Key Cards are used to set or modify the following system functions: ❖

Mute

❖

Lock (Instant security)

❖

Power Plan

❖

Sleep

❖

Hibernation

❖

Output (Display switch)

❖

Brightness control

❖

Wireless

❖

TouchPad™

❖

Zoom (Display resolution)

190

5.375 x 8.375 ver 2.3

Hot Keys/TOSHIBA Cards

Hot Key Cards

191

Using the Hot Key Cards
The Hot Key Cards are normally hidden from view. The Cards appear when you press the Fn key.
NOTE

Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls.

To use the Hot Key Cards:
1

Press and hold the Fn key.
The TOSHIBA Cards appear along the top of the screen.

(Sample Image) Hot Key Card display
2

Select the desired option.
The selected Card is displayed full-size with its available options below it. All other Cards are again hidden from view.

To use a Hot Key Card using a hot key:
1

Press and hold the Fn key.

2

Press the hot key associated with the desired function.
The associated hot key card appears at the top of the screen with its available options below it.

3

To cycle through the displayed options, hold down Fn and press the hot key repeatedly. Release the Fn key when the desired option is selected.

5.375 x 8.375 ver 2.3

192

Hot Keys/TOSHIBA Cards

Application Cards

Application Cards
The Application Cards are used to launch these applications:
TOSHIBA Assist
For more information, refer to “TOSHIBA Assist” on page 143.
TOSHIBA HDD Protection utility
This Application Card launches the TOSHIBA HDD
Protection utility.
PC Diagnostic Tool utility
For more information, refer to “TOSHIBA PC
Diagnostic Tool Utility” on page 154.
Bluetooth settings
This Application Card launches your Bluetooth® settings. TOSHIBA Zooming utility
For more information, refer to “TOSHIBA
Zooming Utility” on page 158.
Disc Creator utility
This Application Card launches the TOSHIBA Disc
Creator utility.
TOSHIBA Hardware Setup utility
For more information, refer to “TOSHIBA
Hardware Setup” on page 156.
TOSHIBA Button Support utility
This Application Card launches the TOSHIBA
Button Support Utility.

NOTE

Not all functions are supported on all models.

5.375 x 8.375 ver 2.3

Hot Keys/TOSHIBA Cards

Application Cards

193

Using the Application Cards
To launch an application using the Application Cards:
1

Press and hold the Fn key.
The TOSHIBA Cards display at the top of the screen.

“stacked” Card

(Sample Image) TOSHIBA Card display
2

Click the “stacked” card on the far right of the display. The
Application Cards are hidden under this card.
The Application Cards appear, and the Hot Key Cards are stacked under the Card on the far left.

(Sample Image) Application Card display
3

Click the Card for the application Card to appear.

4

Click the full-size Card to launch the application.

Card Case
The Card Case feature allows you to choose which cards appear in the Application Card display (see “Using the Application Cards” on page 193). To use the Card Case:
1

Click Start, All Programs, TOSHIBA, Utilities, and then
Settings for Flash Cards.

(Sample Image) Enabling and Disabling Application Cards
2

Click the Open cards case button.

5.375 x 8.375 ver 2.3

194

Hot Keys/TOSHIBA Cards

Hot key functions
3

4
5

The Card Case displays two rows of Cards.
Cards that appear solid (not transparent) in the bottom row are enabled and can be selected when the Application Cards are displayed. The top row contains all of the disabled cards.
To enable a card, drag it from the top row to the bottom row.
To disable the card, drag it from the bottom row to the top row.
To close the Card Case, click the icon in the top corner of the screen.

Hot key functions
Hot key functions are performed using either the Hot Key Cards or by pressing the associated hot key. This section lists the available hot key functions.
NOTE

Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls.

Volume Mute
This TOSHIBA Card or hot key enables/disables volume mute on your computer.
When volume mute is enabled, no sound will come from the speakers or headphones. or Fn +

Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Volume Mute options
❖

To enable mute, select

.

❖

To disable mute, select

.

5.375 x 8.375 ver 2.3

Hot Keys/TOSHIBA Cards

Hot key functions

195

Lock (Instant security)
This TOSHIBA Card or hot key blanks the display.
Selecting this Card or pressing the hot key displays the following options: or Fn +

(Sample Image) Security options
❖

To enable lock, select

❖

To cancel, select

.

.

The Fn + F1 hot key function activates instant security. The user logon screen will appear and a user with a valid account will need to log back on to gain access to the computer.

5.375 x 8.375 ver 2.3

196

Hot Keys/TOSHIBA Cards

Hot key functions

Power plan
This TOSHIBA Card or hot key displays the power plans and cycles through the power plans.

or
Fn +

The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options window. Selecting this Card or pressing the hot key displays the currently selectable power plans:

(Sample Image) Power Plan options
Cycle through the power plans, then select the desired power plan.

5.375 x 8.375 ver 2.3

Hot Keys/TOSHIBA Cards

Hot key functions

197

Sleep mode
This TOSHIBA Card or hot key places the computer into
Sleep mode.
For more information about Sleep mode, please see “Using and configuring Sleep mode” on page 92. or Fn +

Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Sleep options
❖

To enable Sleep mode, select

❖

To cancel, select

5.375 x 8.375 ver 2.3

.

.

198

Hot Keys/TOSHIBA Cards

Hot key functions

Hibernation mode
This TOSHIBA Card or hot key places the computer into
Hibernation mode.

or
Fn +

If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see
“Using and configuring Hibernation mode” on page 90.
Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Hibernation options
❖

To enable Hibernation mode, select

❖

To cancel, select

5.375 x 8.375 ver 2.3

.

.

Hot Keys/TOSHIBA Cards

Hot key functions

199

Output (Display switch)

or

This TOSHIBA Card or hot key cycles through the power-on display options (only the first option is available when you do not have an external monitor attached) (the last option is available only if you are in
Extended Display Mode).
NOTE

Fn +

Some modes are only available with the appropriate device attached and turned on.

❖

Built-in display only

❖

Built-in display and external monitor
(simultaneously)

❖

External monitor only

❖

Built-in display and TV (or other external video device) ❖

TV (or other external video device)

❖

External monitor and TV

❖

Built-in display and external monitor (extended mode) ❖

Built-in display and TV (extended mode)

❖

External monitor and TV (extended mode)

❖

Swap-Switch primary display between internal display and external monitor when using extended desktop To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Display mode options window

5.375 x 8.375 ver 2.3

200

Hot Keys/TOSHIBA Cards

Hot key functions
Cycle through the display modes, then select the desired mode. Not all functions are supported on all models.

NOTE

Some systems also support an additional Swap Image Display mode. This mode is available only if the current setting is an extended desktop mode (Built-in Display and External Monitor, or
Built-in Display and TV). In extended desktop mode, the image is split into two sides, one side per display device. To swap sides, select Swap Image Display.

Display brightness
This TOSHIBA Card decreases or increases the screen brightness. Fn +

This hot key decreases the screen brightness.

Fn +

This hot key increases the screen brightness.

Selecting this Card or pressing either hot key displays the following options:

(Sample Image) Display brightness
Move the slider or press the appropriate hot key repeatedly to decrease or increase the display brightness.

5.375 x 8.375 ver 2.3

Hot Keys/TOSHIBA Cards

Hot key functions

201

Disabling or enabling wireless devices
This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer.
The wireless modes are: or ❖

Wi-Fi® enabled—Enables just the Wi-Fi® module.

❖

Bluetooth® enabled—Enables just the Bluetooth® module. ❖

All disabled—Disables the Bluetooth®, and
Wi-Fi® modules.

❖

All enabled—Enables the Bluetooth®, and Wi-Fi® modules. Fn +

Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Wireless communication options
❖

To enable Wi-Fi®, select

.

❖

To enable Bluetooth , select

❖

To enable all, select

.

❖

To disable all, select

.

❖

To cancel, select

®

5.375 x 8.375 ver 2.3

.

.

202

Hot Keys/TOSHIBA Cards

Hot key functions

Disabling or enabling the TouchPad™
This TOSHIBA Card or hot key enables/disables the
TouchPad™.
For more information on using the TouchPad, see “Using the TouchPad™” on page 76. or Fn +

Selecting this Card or pressing the hot key displays the following options:

(Sample Image) Disable or Enable TouchPad options
❖

To enable the TouchPad, select

.

❖

To disable the TouchPad, select

.

5.375 x 8.375 ver 2.3

Hot Keys/TOSHIBA Cards

Hot key functions

203

Zoom (Display resolution)
This TOSHIBA Card or hot key switches screen resolution.
Selecting this Card or pressing the hot key displays the following options: or Fn +

[Space bar]

(Sample Image) Screen resolution options
Cycle through the screen resolutions, then select the desired resolution. 5.375 x 8.375 ver 2.3

204

Hot Keys/TOSHIBA Cards

Hot key functions

Keyboard hot key functions
Fn +

This hot key takes a snapshot of your display screen.

Fn +

This hot key turns the TOSHIBA Zooming Utility to zoom out.

Fn +

This hot key turns the TOSHIBA Zooming Utility to zoom in.

Fn +

This hot key decreases the speaker volume.

Fn +

This hot key increases the speaker volume.

5.375 x 8.375 ver 2.3

Appendix B

Power Cord/Cable
Connectors
Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world.

USA

Canada

UL approved
CSA approved

United Kingdom

Europe
VDA approved
NEMKO approved

BS approved

Australia

AS approved

205

5.375 x 8.375 ver 2.3

Glossary
TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer.

Acronyms
The following acronyms may appear in this user’s guide.
AC
BIOS

Basic Input/Output System

BD-ROM

Blu-ray Disc™ Read-Only Memory

bps

bits per second

CD

Compact Disc

CD-ROM

Compact Disc Read-Only Memory

CD-RW

Compact Disc Rewrite Memory

CMOS

Complementary Metal-Oxide Semiconductor

COM1

communications port 1 (serial port)

COM2

communications port 2 (serial port)

CPU

Central Processing Unit

DC

Direct Current

DMA

206

Alternating Current

Direct Memory Access

Glossary

DIMM

Dual Inline Memory Module

DOS

Disk Operating System

DPI

Dots Per Inch

DVD

207

Digital Versatile (or Video) Disc

DVD-ROM Digital Versatile (or Video) Disc Read-Only Memory
EPROM

Erasable Programmable Read-Only Memory

eSATA

external Serial Advanced Technology Attachment

FAT

File Allocation Table

FCC

Federal Communications Commission

GB

gigabyte

HDD

Hard Disk Drive

HDMI

High-Definition Multimedia Interface

HDMI-CEC High-Definition Multimedia Interface Consumer

Electronics Control
HTML

Hypertext Markup Language

IEEE

Institute of Electrical and Electronics Engineers

I/O

Input/Output

IRQ

interrupt request

ISP

Internet Service Provider

KB

kilobyte

LAN

Local Area Network

LCD

Liquid Crystal Display

LED

Light Emitting Diode

MB

megabyte

MIDI

Musical Instrument Digital Interface

PC

Personal Computer

PCI

Peripheral Component Interconnect

PCMCIA

Personal Computer Memory Card International
Association

RAM

Random Access Memory

RGB

Red, Green Blue light (monitor)

RFI

Radio Frequency Interference

208

Glossary

ROM

Read-Only Memory

RTC

Real-Time Clock

SD

Secure Digital

SDRAM

Synchronous Dynamic Random Access Memory

SSD

Solid State Drive

TFT

Thin Film Transistor

USB

Universal Serial Bus

URL

Uniform Resource Locator

WAN

Wide Area Network

www

World Wide Web

Terms
The following terms may appear in this user’s guide.

A

active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell. This type of display works well with computers because of its shallow depth and high-quality color.
Active-matrix displays are viewable from wider angles than most passive-matrix displays. adapter — A device that provides a compatible connection between two units. For example, the computer’s internal display adapter receives information from the software and translates it into images on the screen. An adapter can take a number of forms, from a microprocessor to a simple connector. An intelligent adapter (one that is capable of doing some processing) may also be called a controller. Alternating Current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare Direct Current (DC). application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program.

Glossary

B

209

backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Basic Input/Output System (BIOS) — See BIOS. baud rate — The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second). See also bits per second.
Blu-ray Disk™ (BD-ROM) — Offering more storage capacity than
DVDs, the format was developed to allow for more data storage and to enable recording and playback of high-definition video (HD).
BIOS (Basic Input/Output System) — Basic instructions, stored in read-only memory (ROM), containing the information the computer needs to check hardware and load the operating system when you start up the computer. bits per second (bps) — A way of measuring the speed at which information is passed between two devices. This is the basic unit of measure used in modem communications, and is similar, but not identical, to the baud rate. See also baud rate. boot — To start the computer. The term “boot” originates from bootstrap program (as in “pulling itself up by its bootstraps”), a program that loads and initializes the operating system. See also reboot. boot disk — See system disk. boot priority (startup sequence) — The order in which the computer accesses its internal storage drives to locate the startup files. Under the default startup sequence, the computer looks for the startup files in the external media before checking the internal storage drive. bus — An electrical circuit that connects the central processing unit
(CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed — The speed at which the central processing unit (CPU) communicates with the other parts of the computer.

210
C

Glossary

cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory.
See also CPU cache, L1 cache, L2 cache.
CD — An individual compact disc. See also CD-ROM.
CD-ROM (Compact Disc Read-Only Memory) — A form of highcapacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM.
Central Processing Unit (CPU) — The chip that functions as the
“brain” of the computer. It takes information from outside sources, such as memory or keyboard input, processes the information, and sends the results to another device that uses the information. character — Any letter, number, or symbol you can use on the computer. Some characters are non-printing characters, such as a paragraph break in a word-processing program. A character occupies one byte of computer storage. chip — A small piece of silicon containing computer logic and circuits for processing, memory, input/output, and/or control functions.
Chips are mounted on printed circuit boards. click — To press and release the pointing device’s primary button without moving the pointing device. In the Windows® operating system, this refers to the pointing device’s left button, unless otherwise stated. See also double-click. color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured). controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers.
CPU — See Central Processing Unit (CPU).

Glossary

211

CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
See also cache, L1 cache, L2 cache. cursor — An on-screen symbol (usually a flashing vertical line) that indicates the position where characters will appear when you enter data. D

default — The setting selected by a program when the user does not specify an alternative setting. device — A component attached to the computer. Devices may be external (outside the computer’s case) or internal (inside the computer’s case). Printers, disk drives, and modems are examples of devices. device driver — A program (called a “driver”) that permits a computer to communicate with a device. dialog box — An on-screen window displayed by the operating system or a program giving a direction or requesting input from the user.
Direct Current (DC) — The type of power usually supplied by batteries. DC flows in one direction. Compare Alternating Current
(AC).
Direct Memory Access (DMA) — A dedicated channel, bypassing the
CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of material, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as hard disks. Compare disc. See also hard disk. disk drive — The device that reads and writes information and programs on external media or hard disk. It rotates the disk at high speed past one or more read/write heads.

212

Glossary

document — Any file created with an application and, if saved to disk, given a name by which it can be retrieved. See also file. double-click — To press and release the pointing device’s primary button rapidly twice without moving the pointing device. In the
Windows® operating system, this refers to the pointing device’s left button, unless otherwise stated. download — (1) In communications, to receive a file from another computer through a modem or network. (2) To send font data from the computer to a printer. See also upload. drag — To hold down the mouse button while moving the pointer to drag a selected object. In the Windows® operating system, this refers to the left mouse button, unless otherwise stated. driver — See device driver.
DVD — An individual digital versatile (or video) disc. See also
DVD-ROM.
DVD-ROM (Digital Versatile [or Video] Disc Read-Only Memory)
— A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several
CD-ROMs. Compare CD-ROM.

E

emulation — A technique in which a device or program imitates another device or program. enable — To turn on a computer option. See also disable. eSATA — An external device that supports hot swapping and fast data transfer. Very useful in storing and transferring large files. executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities. Other names for an expansion device are port expander, port replicator, docking station, or network adapter. extension — See file extension. external device — See device.

Glossary

F

213

file — A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document.
File Allocation Table (FAT) — The section of a storage drive that keeps track of the location of stored files. file name — A set of characters that uniquely identifies a file within a particular folder. It consists of two parts: the actual name and the file name extension. See also file extension. file extension — The three characters following the period (pronounced
“dot”) at the end of a file name. The extension indicates the type of file. Examples are .exe for program files and .hlp for help files. See also file name. folder — Also called directory. A container for organizing files saved to a disk. A folder is symbolized on screen by a graphical image (icon) of a file folder. A folder can contain files and other folders. format — (verb) To prepare a blank disk for use with the computer’s operating system. Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it. frontside bus — The primary pathway (bus) between the CPU and the computer’s main memory. Also called “system bus.” See also bus. function keys — The keys labeled F1 through F12, typically located on the keyboard. Their function is determined by the operating system and/or individual programs.

G

ground — A conductor to which all components of an electric circuit are connected. It has a potential of zero (0) volts, is connected to the earth, and is the point of reference for voltages in the circuit.

H

hard disk — A storage device composed of a rigid platter or platters that can be magnetically coded with data. Hard disks hold much more information than some external media and are used for long-term storage of programs and data. The primary (or only) hard disk in a computer is usually fixed, but some computers have secondary hard disks that are removable. hardware — The physical components of a computer system. Compare software. 214

Glossary

HDMI (High-Definition Multimedia Interface) — An interface used to transmit high quality audio and video signal via a single cable in digital format, providing better picture quality than analog signal. HDMI-CEC (HDMI Consumer Electronics Control) — One A/V component can control another while using this function, if connected with HDMI cables. See also HDMI.
Hibernation — A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off. See also Sleep,
Suspend.
hot key — (1) A feature in which certain keys in combination with the
Fn key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. hot swapping — The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change.

I

icon — A small image displayed on the screen that represents a function, file, or program. interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device — See device.
Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services.
See also World Wide Web.

K

keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse.

L

L1 (level one) cache — Memory cache built into the processor to help improve processing speed. See also cache, CPU cache, L2 cache.
L2 (level two) cache — Memory cache installed on the motherboard to help improve processing speed. It is slower than L1 cache and faster than main memory. See also cache, CPU cache, L1 cache.

Glossary

215

LAN (Local Area Network) — A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network.
LED (Light Emitting Diode) — A solid state lamp (SSL) that uses light-emitting diodes (LEDs) as the source of light, which offers long life and high efficiency output. Multiple diodes are used together, since the light created by individual light-emitting diodes is small compared to incandescent and compact fluorescent lamps.
LCD (Liquid Crystal Display) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it. A filter over the electrodes permits only non-polarized light to pass to the surface of the display, creating light and dark pixels. load — To move information from a storage device (such as a hard disk) into memory for processing. local area network — See LAN. logical drive — A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives.

M

memory — Typically refers to the computer’s main memory, where programs are run and data is temporarily stored and processed.
Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM. A computer’s main memory is RAM. See also RAM, ROM. microprocessor — See Central Processing Unit (CPU).
MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The
MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog, and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.

216

Glossary

motherboard — The computer’s main circuit board that contains the processor, memory, and other primary components.
MS-DOS prompt — See system prompt. multi-function drive — A DVD drive that can read and write to CD and
DVD media. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation.
Musical Instrument Digital Interface — See MIDI.

N

network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail. non-interlaced — A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk — A disk for storing programs and data that cannot be used to start the computer. Compare system disk.

O

online — Available through the computer. Online may refer to information being read from your own computer’s internal storage drive, such as online documentation or online Help, or to information coming from another company on a company network or the Internet. operating system — A set of programs that controls how the computer works. Examples of operating systems are the Windows Vista®
Home Basic and Windows® 7 operating systems. optical disc drive — A drive which reads plastic coated discs on which information is recorded digitally, and uses a laser to read data, music, or videos.

P

palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time. On your computer, the parallel port provides a parallel communications interface between the computer and an appropriate device. Most modern printers are parallel. Compare serial.

Glossary

217

password — A unique string of characters entered by a user to verify his or her identity to the computer or the network.
PC Card — A credit-card-sized expansion card designed to increase the capabilities of computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter. peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU. pixel — Short for “picture element.” The smallest dot that can be produced on a screen or printer.
Plug and Play — Generally, refers to the computer’s ability to automatically configure itself to work with peripheral devices.
When capitalized, refers to a standard that, when followed by a device manufacturer, allows a computer to configure itself automatically to work with the device. pointer — An icon (usually an arrow) that moves on the screen when you slide your finger across the TouchPad or move a mouse. Used to point to and select/activate on-screen items, such as icons, menu items, and buttons. The shape and purpose of the pointer varies depending on the program you are using and what you are doing. pointing device — Any device, such as the TouchPad or a mouse, that enables you to move the pointer on the screen. port — A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor — See Central Processing Unit (CPU). program — A set of instructions that can be executed by a computer.
The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date.

R

RAM (Random Access Memory) — Volatile memory that can be written to as well as read. Volatile here means that information in
RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory.
Compare ROM.

218

Glossary

Random Access Memory — See RAM.
Read-Only Memory — See ROM. reboot — See boot, restart. removable disk — A disk that can be removed from a disk drive. A
Flash drive is one example of a removable disk. resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically. restart — Synonymous with reboot. To reset the computer by reloading the operating system without turning the computer off. See also boot. RGB (Red, Green, Blue) monitor — A monitor that reproduces all colors by mixing red, green, and blue light in various combinations.
RJ11 connector — A modular connector used on most U.S. telephone systems and direct-connect modems. The RJ11 connector is a
6-wire connector.
RJ45 connector — An eight-wire connector used to connect a computer to a network.
ROM (Read-Only Memory) — Non-volatile memory that can be read but not written to. Non-volatile here means that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up. See also BIOS, memory. Compare RAM.

S

Secure Digital (SD) — A small, portable, non-volatile memory card used to store and transfer data between digital products, providing encryption capability for content security. select — To highlight or otherwise specify text, data, or graphics with the intent to perform some operation on it. serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel.

Glossary

219

shortcut — See keyboard shortcut.
Sleep — A feature of some Windows® operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. software — See program. Compare hardware. solid state drive —A data storage device that utilizes solid-state memory as opposed to a hard disk (see also hard disk). Solid state drives hold a large amount of information and are used for storage of programs and data.
Suspend — A feature of some Windows® operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. system prompt — The symbol (in the MS-DOS® operating system, generally a drive letter followed by a “greater than” sign) indicating where users are to enter commands.

T
U

TFT display — See active-matrix display.
Universal Serial Bus (USB) — USB is a serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single allpurpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial. upload — To send a file to another computer through a modem or network. See also download.
USB — See Universal Serial Bus (USB).
USB Flash drive — A small, portable flash memory card that plugs into

a computer’s USB port and functions as a portable hard drive. They are smaller and more durable than an external hard drive because they do not contain any internal moving parts, but have less storage capacity. See also Universal Serial Bus (USB). utility — A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management.

220
W

Glossary

Web — See World Wide Web.
Wi-Fi® — A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
World Wide Web (www) — The worldwide network of Web sites linked together over the Internet. A user of the Web can jump from site to site regardless of the location of the computer hosting the site.
See also Internet.

Index
A
AC adaptor 45
AC power 116
AC power light 45 accessing network 135 adding memory check total memory 60 memory (optional) 51 optional external devices 50 adequate ventilation cooling fan 44 adjusting TouchPad™ settings 79
Application Cards 192 audio features 137

B backing up files 98, 105 battery battery life 115
Call2Recycle™ 130 care 127, 128 changing 124

charge indicator light 46 charge not lasting 171 charge time 116 charger 116 charging 47, 116 charging the real-time clock
(RTC) 117 conserving power 121 determine remaining power 119 disposal 129 indicator light 119 installation 124, 126 low charge 120 maintaining 128 maximum capacity 115 monitoring power 46, 118 not charging 171 optional secondary battery 116 power management 116 power options 120 power plan 196 real-time clock (RTC) 115 recharge time 115 removing 125

221

222

Index

RTC memory 115 running computer on battery power 114 safety precautions 127 setting notifications 120 battery indicator light 119
BIOS Setup see TOSHIBA Hardware Setup
Blu-ray Disc™ using 107 button eject, optical disc drive 108 power 49
Shut down 52, 87 start 133

C
Call2Recycle™
battery 130 caring for your computer 95 changing battery 124 character keys 99 charging the battery 47 checking device properties 169 cleaning the computer 95 communications network connection 135 set up 134 computer caring for 95 cleaning 95 environmental precautions 41,
130
moving 96 restarting 90 running on battery power 114 setting up 44 turning off 85 turning off more quickly 88 turning off options 85

warning resume failure message
165
computer lock 96 computing tips 97 configuring Hibernation mode 90
Hibernation mode options 90
Sleep mode 92
Sleep mode options 93 connecting AC adaptor 45
AC adaptor cord to (DC-IN) 46 computer to a network 135
HDMI™-compatible TV or external display device 81 monitor 81 power cord/cable 46 power source 46 connection set up 135 cooling fan adequate ventilation 44 customize computer settings 95

D desktop creating new icon 132 exploring the 131 icons 132 recycle bin 132 standard features 132
Windows® operating system 131
Device Manager 169 checking properties 169 directing display output 82 disabling TouchPad™ 80, 202
Disk Defragmenter 175 disk drive corrupted/damaged data files 175

Index

missing files/trouble accessing a drive 174 running slow 175 display does not look normal/flickers 173 external monitor not working 173 display devices external 80 display output settings 82 display panel opening 48 display problems screen is blank 172 display, external adjusting 83 disposal information 28 disposing of used batteries 129
DVD
caring for discs 113 removing with computer off 112 removing with computer on 112
DVDs
using 106

E eject button optical disc drive 108 eject, optical disc drive 109 enabling TouchPad™ 80, 202
ENERGY STAR® 36 error messages problem with display settings/ current settings not working with hardware 173 warning resume failure 165
Error-checking 174 eSATA connecting to the eSATA/USB combo port 186 eSATA/USB combo port
Using 141

223

using 141 exploring desktop 131 external monitor not working 173 external devices keyboard 83 mouse 83 external display device
HDMI™ Out port 80
RGB (monitor) port 80 external display, adjusting 83

F
FAT (File Allocation Table) 174 file extensions using 104 files backing up 98, 105 file names 104 printing 104 restore 106 saving 103 using a file extension 104 function keys 99

H headphones using 138
Help and Support
Windows® operating system 168
Hibernation mode 86 configuring 90 configuring options 90 hot key 198 powering down 90
Shut down 90 starting again from 92 using 90 hot key disabling or enabling wireless devices 201

224

Index

display brightness 200
Hibernation mode 198
Lock (Instant security) 195
Output (Display switch) 199 power plan 196
Sleep mode 197 using to set a power plan 123 volume mute 194
Zoom (Display resolution) 203 zooming in 204 zooming out 204
Hot Key Cards 190
Hot key functions 194

character keys 99
Ctrl keys 99
Fn key 99 function keys 99 hot keys 204 not working 164 special Windows® keys 100 troubleshooting 172 using 98 keyboard, external 83 keys Ctrl Fn Alt 99 function keys 99

I

L

icon

LEDs system indicator lights 119
AC adaptor light 118
AC power light 45, 46 battery light 46, 47
ON/OFF light 49, 90, 92,
95
Web Camera light 138 lock computer, using 96

desktop 132 moving to desktop 132 recycle bin 132 safety 39 installation memory module 51 installing a charged battery 126 battery 124 memory modules 51 mouse 83
Instruction Manual for Safety and
Comfort 41 internal storage drive recovery 60
Internet
bookmarked site not found 168 slow connection 168
URL address not found 168

J jack RJ-11 136

K keyboard Alt keys 99

M maintaining your battery 128 manual eject hole optical disc drive 109 memory adding (optional) 51 check total memory 60 problem solving 170 removing memory module slot cover 53
Memory card reader inserting memory media 140 removing memory media 140 using 139 memory module installation 51 inserting into socket 54

Index removing 57, 59 microphone using 137 modem connecting to telephone line 136 problem solving 178 monitor connecting 81 monitor problems monitor not working 172 monitoring battery power 118 mouse installing 83 mouse utility 155 moving the computer 96

N network accessing 135
Connect to the Internet 135 connecting your computer 135 networking wireless 134 notification area 134

O
ON/OFF indicator light 119 online resources
Toshiba 113 optical disc
Auto-Run feature 111 caring for 113 handling 110 inserting 109 playing optical media 111 positioning 110 recording optical media 111 removing with computer off 112 removing with computer on 112 optical disc drive caring for optical discs 113 components 108 drive in-use indicator light 108

225

eject button 108 handling an optical disc 110 inserting an optical disc 109 manual eject hole 109 playing an audio CD 111 playing optical media 111 problems 175 recording optical media 111 removing a disc 112 troubleshooting 175 using 106, 108 optical media recording 111 optional external devices adding 50 optional secondary battery 116 other documentation 40

P password deleting a supervisor 151 deleting a user 152 instant password 149 instant, using 149 power-on password 149 setting 149 setting a supervisor 150 setting a user 151 supervisor password 149 user password 149 port HDMI™ 80
RGB 80 power computer will not start 164 connecting cable to AC adaptor
46
cord/cable 46 cord/cable connectors 205 energy-saving features 114 problem solving 170 turning on 49

226

Index

power button 49 power management 116 optimum performance 116 power plans selecting power plan options 122 using a hot key 123 power saving options 121 powering down using Hibernate 90 using Sleep 93 precautions safety 42 printer connecting 83 setting up 84
USB-compatible 83 printing a file 104 problem solving
AC power 170 battery charge does not last 171 battery not charging 171 changing display properties 173 checking device properties 169 computer will not power up 164 contacting Toshiba 186, 187 corrupted/damaged data files 175
Device Manager 169 disk drive is slow 175 display is blank 172 external display not working 173 external monitor 172 faulty memory 170 high-pitched noise 178
Internet bookmarked site not found 168
Internet connection is slow 168 keyboard not responding 164 missing files/trouble accessing a drive 174 modem not receiving or transmitting 178

no sound 178 power and batteries 170 program not responding 163 program not working properly
175
screen does not look correct/ flickers 173
Startup options 167
URL address not found 168 warning resume failure 165
Windows® operating system not working 166 program, starting 100 program, starting from Start menu 101 programs not running correctly 175 projector connecting 81

R real-time clock (RTC) battery 115 recording sounds 137 recovery checking internal storage drive operating status 75 creating recovery DVDs/media
69
erasing internal storage drive 74 installing drivers and applications
76
internal storage drive 60 out-of-box state 62 restoring from recovery DVDs/ media 72 to custom size partition 64 without changing drive partitions
67
recycle bin icon 132 registering computer 50 removing Index

an optical disc with computer on
112
and optical disc with computer off
112
battery from the computer 125 memory module 57 memory module slot cover 53 restarting computer 90 restoring your work 106
RJ-11 jack 136 running computer on battery power
114

S safety computer 130 disposing of batteries 129 icons 39 precautions 42 safety precautions battery 127 saving files 103 screen does not look normal/flickers 173 screen problems blank screen 172
Search programs and files field starting a program 102 selecting a place to work 41 power plan options 122 video cables 81 setting low battery notifications 120 setting up
AC adaptor 45 adding memory (optional) 51 communications 134 computer 44 software Setup Wizard 49

227

work environment 41 setting up a connection 135 settings customize computer settings 95 display output 82
Shut down button 52, 87 command 87 computer 52, 87
Hibernation mode 90
Sleep mode 93
Sleep mode 86 configuring 92 configuring options 93 hot key 197 powering down 93
Shut down 93 starting again from 95 using 92 software Setup Wizard 49 software program starting 100 starting from Start menu 101 sound problem solving 178 sounds recording 137 speakers using external 138 start button 133 starting a program 100
Search programs and files field
102
Windows® Explorer 101
Windows® Start menu 101 starting a program from Start 101 starting again from
Hibernation mode 92
Sleep mode 95
Startup menu problem solving 167

228

Index

supervisor password, deleting 151 supervisor password, set up 150 system indicator lights
AC power 45 drive in-use indicator 108
LEDs 46, 47, 49, 90, 92, 95,
118, 119, 138

T taskbar 133 telephone line connecting to modem 136 television adjusting display 83 tips for computing 97
Toshiba
online resources 113 registering computer
Toshiba Web site 50 worldwide offices 188
TOSHIBA Accessibility 159
Toshiba accessories memory 51
TOSHIBA Application Installer 148
TOSHIBA Assist 143
Connect tab 144
Optimize tab 147
Protect & Fix tab 146
Secure tab 145
TOSHIBA eco power plan 124
TOSHIBA eco Utility™ 160
TOSHIBA Face Recognition Utility
153
TOSHIBA Hardware Setup 156
TOSHIBA PC Diagnostic Tool Utility
154
TOSHIBA PC Health Monitor 161
TOSHIBA Service Station 161
TOSHIBA Zooming Utility 158
TouchPad™
using 76

traveling tips 130 troubleshooting external keyboard 172 keyboard 172 optical disc drive 175 turning off computer 85 computer more quickly 88 options 85 turning on power 49

U
USB-compatible
printer 83 user password, deleting 152 user password, setting 151 using a microphone 137 computer lock 96
DVDs 106
Hibernation mode 90 hot key to set a power plan 123
Memory card reader 139 optical disc drive 106
Shut down command 87
Sleep mode 92
TOSHIBA eco power plan 124
TouchPad™ 76
Web Camera 138 using the keyboard 98
Utilities 142

V video projector adjusting display 83

W warranty standard limited warranty 40
Web Camera using 138
Web sites 187

Index

Wi-Fi® wireless networking 134
Windows® Explorer starting a program from 101
Windows® operating system desktop 131
Help and Support 168 problem solving 166
Windows® Start menu starting a program 101 wireless networking 134 wizards Connect to the Internet 135

229