Cargo Winch
A winch is a mechanical device that is used to pull in (wind up) or let out (wind out) or otherwise adjust the "tension" of a rope or wire rope (also called "cable" or "wire cable"). In its simplest form it consists of a spool and attached hand crank. In larger forms, winches stand at the heart of machines as diverse as tow trucks, steam shovels and elevators

Capstan or Drum - A capstan is a vertical-axled rotating machine developed for use on sailing ships to apply force to ropes, cables, and hawsers. The principle is similar to that of the windlass, which has a horizontal axle.
Bearing Bracket - The Bearing bracket on a bicycle connects the crankset (chainset) to the bicycle and allows the crankset to rotate freely. It is not a bracket as such. It contains a spindle that the crankset attaches to, and the bearings that allow the spindle and cranks to rotate.
Chocks - Wheel chocks (or chocks) are wedges of sturdy material placed closely against a vehicle's wheels to prevent accidental movement. Chocks are placed for safety in addition to setting the brakes.
Capstan Shaft - A drive shaft, driveshaft, driving shaft, propeller shaft (prop shaft), or Cardan shaft is a mechanical component for transmittingtorque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement between them.
Bearing Cap - A bearing cap can be described as a number of things, but the most common reference is the part of the engine block which contains the main bearings of a crankshaft.
Coupling - A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded.

Capstan
Capstan may refer to:
Capstan (nautical), a rotating machine used to control or apply force to another element. Capstan (tape recorder), rotating spindles used to move recording tape through the mechanism of a tape recorder. Capstan (software), audio restoration program by Celemony which eliminates wow and flutter. Capstan (cigarette), a brand of British cigaretteSlingsby Capstan, a British two-seat glider of the 1960s

Trundle Head - One of the disks forming the ends of a lantern wheel or pinion. The drumhead of a capstan especially, the drumhead of the lower of two capstans on the sane axis.
Messenger Cable - Outdoor aerial installations along utility poles for cable television, telecom or other outside plant campus backbone applications without the need for cable lashing.
Hatch - Our most common type of Baier Premium flush hatch are our Lift-Out type. These hatches lids can be removed and stowed while working on deck.
Bitts - Converts an integral value into another data type, based upon the bit pattern of the value. This is particularly helpful in converting between signed and unsigned representations.
Roller - The main function of roller reamers cut earth formations to enlarge the borehole to the desirable size during well drilling operation, which may be the original size of the drill bit in the case where the drill bit wears to be under-gauged.
Hawse Holes - Hawsehole is a nautical term for a small hole in the hull of a ship through which hawsers may be passed. Also known as a cat hole. In the (British) Royal Navy, an officer who had served as a seaman before being promoted was said to have "come in through the hawsehole.
Anchor Cable - a cable in an aircraft to which the parachute static lines or strops are attached.

Bow Thruster
A bow thruster or stern thruster is a transversal propulsion device built into, or mounted to, either the bow or stern, of a ship or boat, to make it more manoeuvrable.

Remote Control Unit - a remote control is a component of an electronic device such as a television set, DVD player, or other home appliance, used to operating the device wirelessly from a short distance. Remote control is a convenience feature for the consumer, and can allow operation of devices that are out of convenient reach for direct operation of controls.
Hydraulic Power Unit - Hydraulic power units provide pressurized flow to hydraulic motors, cylinders, and other components.
Pressure switch - A pressure switch is a form of switch that closes an electrical contact when a certain set pressure has been reached on its input. The switch may be designed to make contact either on pressure rise or on pressure fall.
Relay Box - relay box for controlling power from your wall socket using an arduino or microcontroller. The inspiration for writing an instructable came when I decided to build some relay boxes for my personal Garduino project.
Electric Motor - electric motor is an electrical machine that converts electrical energy into mechanical energy. The reverse of this would be the conversion of mechanical energy into electrical energy and is done by an electric generator.
Operating Link - operating system (OS) is software that manages computer hardware and software resources and provides common services for computer programs. The operating system is an essential component of the system software in a computer system. Application programs usually require an operating system to function.
Servo Cylinder and feedback - servo system with a linear controller using feedback linearization. Feedback linearization technique is applied to overcome the non-linearities of the system.
Flexible Coupling - couplings is to join two pieces of rotating equipment while permitting some degree of misalignment or end movement or both. By careful selection, installation and maintenance of couplings, substantial savings can be made in reduced maintenance costs and downtime.
Blade carrier - Utilize low- and high-profile blades with the quick clamp system of Thermo Scientific™ Disposable Blade Carriers. Updated models (long stroke and version 2 bar guideways) include removable angle adjustment and blade clamp levers.
Hub cover - a decorative disk on an automobile wheel that covers at least a central portion of the wheel, called the hub. An automobile hubcap is used to cover the wheel hub and the wheel fasteners to reduce the accumulation of dirt and moisture. It also has the function of decorating the car.
Moving cylinder - is necessary to create lift is to turn a flow of air. We are familiar with the lift generated by an airplane wing or a curving baseball. But a simple rotating cylinder will also create lift.
Cap - cap is a form of headgear. Caps have crowns that fit very close to the head and have no brim or only a visor.
Piston - A piston is a component of reciprocating engines, reciprocating pumps, gas compressors and pneumatic cylinders, among other similar mechanisms. It is the moving component that is contained by a cylinder and is made gas-tight by piston rings.
Propeller Hub - is a device to which a propeller is mounted. Typically made of a metal or composite material, the propeller hub contains threaded inserts to secure the mounting bolts running through the propeller; the hub also may have a threaded shaft and key way to which the propeller affixes.
Propeller Blade - blade propeller may be used on aircraft to generate thrust. Normally propellers are multiblades but the simplicity of a single-blade propeller fits well on motorized gliders, because it permits the design of a smaller aperture of the glider fuselage for retraction of the powerplant.
Oil Transfer Unit - transfer kit is used for oil pumping diesel fuel or kerosene for vehicle, oil warehouse, construction site, farm and outside work for easy convenient filling.

Anchor Winch
An anchor windlass is a machine that restrains and manipulates the anchor chain on a boat, allowing the anchor to be raised and lowered by means of chain cable. A notched wheel engages the links of the chain or the rope.

Speed control - An electronic speed control or ESC is an electronic circuit with the purpose to vary an electric motor's speed, its direction and possibly also to act as a dynamic brake. ESCs are often used on electrically powered radio controlled models, with the variety most often used for brushless motors essentially providing an electronically generated three-phase electric power low voltage source of energy for the motor.
Reduction gearing - is the ratio of the angular velocity of the input gear to the angular velocity of the output gear. The gear ratio can be calculated directly from the numbers of teeth on the gears in the gear train.
Rope guard - Modern navies rely on small numbers of very capable and highly valuable ships to operate.
Drum brake - A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum.
Clutch lever - These lightweight aluminum levers feature on-the-fly lever adjustment for customizable rider ergonomics for large or small hands.
Drive motor - motor control applications from low to medium voltage and from simple to complex. Our motors are designed for optimum variable speed performance and service life.
Electric brake - Electric Friction Brake, often referred to as just Electric Brake or Electric Trailer Brake is a brake controlled by an electric current and are seen on medium duty trailers like caravans/RVs and Consumer-Grade Car Trailers. It is related to the Electromagnetic track brake used in railroad applications which also uses electric current to directly control the brake force.
Gypsy head - a flanged drum on a winch, for winding in lines.
Oil bath - An oil bath, a type of heated bath, is a laboratory heating device which uses boiling oil as the temperature regulator. Since different oils have different boiling points it is possible to obtain a temperature near to the desired temperature by selecting an oil with a boiling point as close as possible to the desired temperature.
Bed Plate - a plate or framing used as a support.
Drum Clutch and Drum Break Lever - The DC and DCV constricting drum clutches and brakes are found all throughout industry in general power transmission duties. Constructed using an integral rim and tube actuator, the DC has low inertia and high misalignment capacity, offering a simple solution to less arduous clutch and brake requirements.

Mooring winch
A hydraulic, electric, or steam machine on a ship used to haul in mooring lines when securing the ship to a pier or wharf.

Drum Flange - Being made from solid brass gives them a more musical quality, they really add a beautiful tone to the overall drum sound and sing when struck. They require hoop hooks for the tension rods to pass through.
Boiled Bracket - A bracket is a tall punctuation mark typically used in matched pairs within text, to set apart or interject other text. Used unqualified, brackets refer to different types of brackets in different parts of the world and in different contexts.
Jack with Gauge - Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance. Centered pump and ram for balance and easy positioning. Hydraulic bypass circuit prevents over travel. Pre-tapped bases accept pressure gauge
Winch Foundation- In its simplest form it consists of a spool and attached hand crank. In larger forms, winches stand at the heart of machines as diverse as tow trucks, steam shovels and elevators.

Hatch Cover
Hatch covers remain at the very core of our business and today we are proud to offer optimised cargo handling systems, including not only hatch covers, but also bulkheads, cell guides, container stanchions, lashing bridges etc.

Locking Handle - RS Components' unrivalled range of electronic components features thousands of Enclosures, Storage & Material Handling products including 19-Inch Racking, Workshop Equipment & Storage and Locking Handles components.
Inside Handle - On most vehicles, the interior door handle is bolted to the door panel or inner door frame. Inside the door, the handle is attached to a connecting rod/link that moves the door latch. Over time, the latch can become worn due to lack of lubrication or excessive contaminates (dirt, grime, rust) in the mechanism.
Weather Gasket - is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.
Fiberglass Insulation - Fiberglass (or fibreglass) is a type of fiber reinforced plastic where the reinforcement fiber is specifically glass fiber. The glass fiber may be randomly arranged but is commonly woven into a mat. The plastic matrix may be a thermosetting plastic- most often epoxy, polyester resin- or vinylester, or a thermoplastic.
22GA Inner Liner - Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.00" (2.54cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic.
Hold Open Arm – Take off the screw and nut, and separate arm A and B. Adjusting the hold open function. As saw on the drawing, use a screw driver to turn the slotted screw to right or left. After the adjustment, assemble the arm again, and make sure all the parts are in the (see mounting instructions door closer). fire control doors. hand side so that the strength of the hold open will be adjusted. right postion.
Compression Spring Operator Fully Enclosed - They are usually coiled at a constant diameter, though they can be coiled in other needed forms such as conical, concave (barrel), convex (hourglass), or various combinations of these.
Curb Cap - CURB-65, also known as the CURB criteria, is a clinical prediction rule that has been validated for predicting mortality in community-acquired pneumonia and infection of any site.
14GA curb - 14 ga. galvanized steel on both outer wall and inner wall. 12" high curb with 3-5/8" wide flange including holes for securing to roof deck. (Curb includes integral counter flashing)
Heavy Duty Pintle Hinges - Hinges and pintles act together to secure the shutters to the structure and provide the proper swing and movement of the shutters from the open to closed position.

A digital device is an electronic device which uses discrete, numerable data and processes for all its operations. The alternative type of device is analog, which uses continuous data and processes for any operations. Any device which uses a computer of any sort in its operations is at least partially digital.
Digital electronics, or digital (electronic) circuits, are electronics that represent signals by discrete bands of analog levels, rather than by continuous ranges (as used in analogue electronics). All levels within a band represent the same signal state. Because of this discretization, relatively small changes to the analog signal levels due to manufacturing tolerance, signal attenuation or parasitic noise do not leave the discrete envelope, and as a result are ignored by signal state sensing circuitry.
Analog Devices, Inc., also known as ADI or Analog, is an American multinational semiconductor company specializing in data conversion and signal conditioning technology, headquartered in Norwood, Massachusetts. In 2012, Analog Devices led the worldwide data converter market with a 48.5% share, according to analyst firm Databeans.

The company manufactures analog, mixed-signal and digital signal processing (DSP) integrated circuits (ICs) used in electronic equipment. These technologies are used to convert, condition and process real-world phenomena, such as light, sound, temperature, motion, and pressure into electrical signals.

dsadas