Let's Propel CORN THRESHING MACHINE to Realize Best Performance Effect. How to do?

First, put the four feet of the Corn Threshing Machine on flat foot pads.

Second, feed Corn Threshing Machine corn cobs continuously and evenly. The feeding quantity should be proper. Interrupted feeding may affect its productivity and too large feeding quantity may cause machine blocking or even damage the motor.

Third, check whether the power line link is fixed and install the ground electrode.

Fourth, before the work finishing, discharge all of the corn cobs and then make the Corn Threshing Machine halt with no-load.

Fifth, the corn cobs moisture rate should not be higher than 20%, or it also affects the operation effect.

We can take Extended Swing Hammer Type Corn Threshing Machine for the example.
The swing hammer type Corn Threshing Machine has 36 flexible hammers. Corn Threshing Machine has the same structure with the threshing part of the corn husking and threshing machine.

Swing hammer type Corn Threshing Machine technical parameter:
Weight: 42kg
Motive power: 3kw
Yield: 2500kg/h
Length of the frame: 77cm

We should notice : the putting place, the feeding speed and the preparation before corn threshing machine working.

Besides, there are six attentions in Corn Threshing Machine operation.
First, check the Corn Threshing Machine before operation. Check whether the rasp bar is in good condition, the bolts are loose, the transmission parts have problems and find out the unsafe factors to eliminate them.

Second, don’t make theCorn Threshing Machine have overload work, no matter it uses electric motor or diesel engine.

Third, the safety device should be complete. For example, there should have protective cover at each chain part to avoid hurting. The electric motor should have ground lead. The diesel exhausting pipe should have fire fighting cover to avoid fire hazard.

Fourth, corn feeding should be even.

Fifth, the continuous working time should not be too long. For example, when the machine works for 5-6 hours, we should shut it down and make it rest for a while.

Sixth, your Corn Threshing Machine should not be home-made or obsolete. Home-made Corn Threshing Machine or obsolete thresher always has low safety performance compared with the Corn Threshing Machine after tightened inspection. http://www.corn-thresher.com ugoodmach@gmail.com