...A REPORT ON INDUSTRIAL ATTACHMENT AT CORPORATIVE INSURANCE COMPANY UNIVERSITY OF ELDORET SCHOOL OF BUSINESS AND MANGEMENT SCIENCE PRESENTED BY KENNEDY OCHIENG` OBIERO REG. NO: BBU/008/2011 September, 2014 CIC Insurance Group Acknowledgement This attachment was possible thanks to the cooperation and support of a number of people, who have enabled me gain much more than what the scholastic or industrial aspects of the program could have given. I am grateful to them all, and would like to express my appreciation to the following people: Mr. Joel Ochieng`, my Industrial Attachment supervisor in CIC, for sharing enthusiastically with me his experiences in insurance. I am sincerely indebted to him for supporting and assisting me thus contributing to the success of this industrial attachment. ................., the school supervisor from the University of Eldoret, who has helped in coordinating with the administration stuffs and provide valuable assistance in my logbook and report writing. I wish to thank the Almighty God for seeing me through all circumstances during the course of my study. Let his holy name be glorified. More thanks go to my group mates for their constructive criticism that enriched my way of thinking. Table of content Summary of the report Life insurance is an important aspect of the social-economic development of the society. It helps to safeguard the future while also ensure some savings that can be used in a later date. Despite...
Words: 3275 - Pages: 14
...STRATHMORE UNIVERSITY ATTACHMENT REPORT GUIDELINES Introduction The purpose of the Attachment report is to reflect the experience and knowledge gained during the Attachment in a target-oriented way. The report should do so with a focus on the application of the knowledge and skills already acquired during the university program, and of interdisciplinary key qualifications. The keywords given below can be used as a guideline for the appropriate structure and content of an Attachment report. Cover Page The Cover Page should display: University Name Faculty Student Full Name (as it appears on the Faculty Register) Student Number (as it appears on the Faculty Register) Organization Name (and Logo if possible) Attachment Start and Finish Dates Table of Contents Contents of the report with chapters and page numbers, list of tables, and list of figures. 1.0 Executive Summary A one page summary of the organization and a short account of the major activities carried out during the Attachment period. Conditions surrounding your organization choice should also be framed and include: Selection of the establishment Application procedure Frame conditions agreed upon (e.g. contract, pay, working time) Job / task definition 2.0 Introduction of the organization Branch of trade / field Structure (size, turnover, departments, number of employees) Field of (business) activity / responsibilities Self-concept Special regulations / measures concerning interns This section should answer the following...
Words: 1180 - Pages: 5
...CENTRAL INDUSTRIAL LIAISON UNIVERSITY OF LAGOS AND PLACEMENT UNIT LAGOS, NIGERIA Ag. DEP. DIRECTOR: JOHN U. NWALOR B.Sc. (MIT), M.Sc. (MIT), Telephone: 01-7403208-11 Ph.D. (Pittsburgh), FNSChE, MNSChE E-mail: directorcilpu@yahoo.com …………………………, 201… Dear Sir/Madam, STUDENTS’ INDUSTRIAL WORK- EXPERIENCE SCHEME {SIWES} SIWES YEAR………………………………….. The bearer Mr./Miss/Mrs.…………………………………………………………is a year ………………………..student in the Department of …………………………………….. He/She has expressed willingness to have his/her Industrial Training beginning from April, ………………………….. to September, …………………… . in your company. We are confident that your company can provide him/her the required exposure. It will be appreciated if you could let us know if you are prepared to take him/her for the training. We trust that we can always count on your support now and in the future in ensuring that SIWES continues to play its role in the formation of technical manpower for the economy. Please complete the attached form and send it back through the bearer. Thank you. DR. J. U. NWALOR, Ag. DEPUTY DIRECTOR, CENTRAL INDUSTRIAL LIAISON & PLACEMENT UNIT CENTRAL INDUSTRIAL LIAISON & PLACEMENT UNIT UNIVERSITY OF LAGOS STUDENTS’ INDUSTRIAL WORK- EXPERIENCE SCHEME (SIWES) OFFER OF PLACE OF INDUSTRIAL ATTACHMENT...
Words: 2534 - Pages: 11
...GUIDELINES FOR INDUSTRIAL ATTACHMENT REPORT Report Presentation – Standard Format a) Length of the report should be between 20-30 pages including appendices. b) Typed and spaced at 1 ½ lines. No indentation at the start of the paragraph. c) Font size 12, Times New Roman, Alignment = Justified. d) CAPITALISE chapter headings and use Title Case for sub-headings. e) Use Arabic Numerals for chapter headings e.g. Chapter 1 and not Chapter I. f) Use Roman numerals for numbering preliminaries, and Arabic Numerals for numbering the rest of your report. (NB: Do not number the cover page) g) Margins – Use the standard or default formats. (Make sure there is enough space for spiral binding on the left margin.) h) Use A4 bond paper. (Use one side of the paper only.) i) Bind your report using spiral or hard binding. If spiral is used, the top cover should be transparent and the back should be hard. j) Acronyms – Spell the acronym out once and put the abbreviation in brackets e.g. Library and Information Science (LIS). Use capitalisation on acronyms, except on special cases, e.g. SAfAIDS. k) Be clear and concise in your language by paying attention to grammar, punctuation, spellings, etc. Use British spelling e.g. organisation and not organization. NB: You are required to submit 2 copies of your report, together with your logbook. The front cover must be as follows: (Decorations, logos, etc are not allowed) NATIONAL UNIVERSITY OF SCIENCE AND TECHNOLOGY FACULTY...
Words: 1063 - Pages: 5
...MODULE A2003 ENGLISH FOR TECHNICAL PURPOSES 2 INTRODUCTION and GUIDE CURRICULUM GRID | TOPIC |UNIT |TIME ALLOCATED | |Application for Industrial Attachment |1 |4 weeks (8 hours) | |Processes and Procedures |2 |4 weeks (8 hours) | |Instructions |3 |3 weeks (6 hours) | |Description of Object |4 |3 weeks (6 hours) | UNIT 1 : APPLICATION FOR INDUSTRIAL ATTACHMENT 1. Letter of Application for Attachment for Industrial Training 2. Confirmation by Telephone for Industrial Attachment 3. Thank You Letters UNIT 2 : PROCESSES AND PROCEDURES UNIT 3 : INSTRUCTIONS UNIT 4 : DESCRIPTION OF OBJECT Introduction This module is designed for second semester students taking technical courses at the polytechnic. The learning materials provided in the module will help you improve your language proficiency to handle communication situations as well in English. The module is designed for 30 contact hours. This includes assessments and class activities. General...
Words: 702 - Pages: 3
...A TECHNICAL REPORT ON STUDENTS INDUSTRIAL WORK EXPERIENCE SCHEME (SIWES) AT PALANDO FISH FARMING INDUSTRY 27 SAMUEL STREET ILAMOSE ESTATE, OKE AFA, ISOLO, LAGOS STATE NIGERIA FROM 16 JULY 2012 TO 16 OCTOBER 2012 BY KURANGA HAKEEM ABIODUN MATRIC NO: 09/10AC119 BEING TECHNICAL REPORT SUBMITTED TO THE DEPARTMENT OF AGRICULTURAL SCIENCE OF UNIVERSITY OF ILORIN P.M.B. 1515 ILORIN KWARA STATE IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE AWARD OF B.Agric IN AGRICULTURAL SCIENCE CERTIFICATION I, Kuranga Hakeem Abiodun with matriculation number 09/10AC119 hereby declare that I undergo three full months of Industrial Training Programme at Palando Fish Farming Industry Isolo, Lagos and that this report is written by me to the best of the practical knowledge I gained during the course of the training programme. ---------------------------------------- ABSTRACT This report on Students Industrial Work Experience Scheme (SIWES) is mainly to help all categories of students to succeed and achieve their various academic life ambitions. It is therefore, important for students in tertiary institution. Indeed, it will hopefully be useful for graduate who stay at home to improve themselves technically. Therefore, this report will be useful for students preparing for this supervised Industrial work experience scheme and work service as a guide to them. TABLE OF CONTENTS Title page Certification ...
Words: 285 - Pages: 2
...A TECHNICAL REPORT ON STUDENTS INDUSTRIAL WORK EXPERIENCE SCHEME (SIWES) AT PALANDO FISH FARMING INDUSTRY 27 SAMUEL STREET ILAMOSE ESTATE, OKE AFA, ISOLO, LAGOS STATE NIGERIA FROM 16 JULY 2012 TO 16 OCTOBER 2012 BY KURANGA HAKEEM ABIODUN MATRIC NO: 09/10AC119 BEING TECHNICAL REPORT SUBMITTED TO THE DEPARTMENT OF AGRICULTURAL SCIENCE OF UNIVERSITY OF ILORIN P.M.B. 1515 ILORIN KWARA STATE IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE AWARD OF B.Agric IN AGRICULTURAL SCIENCE CERTIFICATION I, Kuranga Hakeem Abiodun with matriculation number 09/10AC119 hereby declare that I undergo three full months of Industrial Training Programme at Palando Fish Farming Industry Isolo, Lagos and that this report is written by me to the best of the practical knowledge I gained during the course of the training programme. ---------------------------------------- ABSTRACT This report on Students Industrial Work Experience Scheme (SIWES) is mainly to help all categories of students to succeed and achieve their various academic life ambitions. It is therefore, important for students in tertiary institution. Indeed, it will hopefully be useful for graduate who stay at home to improve themselves technically. Therefore, this report will be useful for students preparing for this supervised Industrial work experience scheme and work service as a guide to them. TABLE OF CONTENTS Title page Certification Abstract/Report overview Table of contents CHAPTER 1 1.1...
Words: 287 - Pages: 2
...CURRICULUM VITAE [pic] [pic] P.O. BOX 62000 - 00200, NAIROBI KENYA e-mail: wguyo@jkuat.ac.ke PHONE: +254-722-593525 warioguyo@gmail.com PERSONAL INFORMATION Sex: Male Date of birth: 11th.May.1975 Nationality: Kenyan ID No. 12754448 Marital Status: Married Religion: Muslim CAREER OBJECTIVE To work in a challenging and dynamic position in an area of Professional Human Resources training, development and Knowledge management, with a view of integrating creativity, team work and research to provide practical way forward that will map comprehensive strategies for human capacity development PERSONAL PROFILE • Good communication and interpersonal skills with ability to relate to people at all levels. • Ready to learn and take instructions. • Strong team leadership character, trustworthy and reliable personality. • Excellent endurance and ability to work under pressure and dead lines. • Able to mix and socialize quickly with people of diverse cultures and background. • Strong ambitions for success with equally focused determination and stamina to achieve. EDUCATIONAL BACKGROUND Date Institution/Award 2007 – 2012 Jomo Kenyatta University of Agriculture and Technology, School for Human Resource Development. Doctor of Philosophy in Human Resource Management 2005 – 2007 Jomo Kenyatta University of Agriculture and...
Words: 2494 - Pages: 10
...INDUSTRIAL TRAINING TECHNICAL REPORT FORMAT Nigerian students studying science based courses in their 300 & 400 level depending on their course of study are supposed to embark on industrial training for a period of 3 months to one(1) year and this carries about 3-6 units in their second semester credit load. After the industrial training (I.T) period each student is supposed to write a technical report of his or her I.T experience this bears 25% of the total siwes marks. ALLOTMENT OF MARKS AS APPROVED BY ITF Log book Record/ Presentation: 25 marks Technical Report: 25 marks Attitudinal Observation: 10 marks Employers Report: 25 marks Oral interview by department (I.T defence): 15 marks. This makes technical report a major issue in gaining good grades from siwes. In writing a technical report the following format should be used COVER PAGE : This should contain the students name, department, matriculation Number, period of attachment (dates should be quoted), your employers name and location. DEDICATION PAGE for example . I dedicate this report to the almighty God. ACkNOWLEDGEMENT eg I will like to acknowledge my parents for their immense support, my lecturers and all who have contributed to this point in the success of my accademic pursuit. TABLE OF CONTENTS this should contain the afore mentioned and four chapters. CHAPTER 1 : This should contain the introduction, brief history of the firm where training was carried out and organisational chart. CHAPTER 2 : This should...
Words: 296 - Pages: 2
...INDUSTRIAL TRAINING TECHNICAL REPORT FORMAT Nigerian students studying science based courses in their 300 & 400 level depending on their course of study are supposed to embark on industrial training for a period of 3 months to one(1) year and this carries about 3-6 units in their second semester credit load. After the industrial training (I.T) period each student is supposed to write a technical report of his or her I.T experience this bears 25% of the total siwes marks. ALLOTMENT OF MARKS AS APPROVED BY ITF Log book Record/ Presentation: 25 marks Technical Report: 25 marks Attitudinal Observation: 10 marks Employers Report: 25 marks Oral interview by department (I.T defence): 15 marks. This makes technical report a major issue in gaining good grades from siwes. In writing a technical report the following format should be used COVER PAGE : This should contain the students name, department, matriculation Number, period of attachment (dates should be quoted), your employers name and location. DEDICATION PAGE for example . I dedicate this report to the almighty God. ACkNOWLEDGEMENT eg I will like to acknowledge my parents for their immense support, my lecturers and all who have contributed to this point in the success of my accademic pursuit. TABLE OF CONTENTS this should contain the afore mentioned and four chapters. CHAPTER 1 : This should contain the introduction, brief history of the firm where training was carried out and organisational chart. CHAPTER 2 : This...
Words: 295 - Pages: 2
...Description of Technical Memo Format Technical memos are used to communicate short reports where a formal technical report is not warranted. Typically they would be employed to communicate the solution to a posed question or assignment involving a technical analysis. Technical memos often include equations, figures and illustrations, tables, data and attached appendices. Due to their longer length, the memo’s text is broken into standard first level sections, and where appropriate, into second level sections depending on the complexity of the information being conveyed. Technical reports must be clear and concise. Proper organization of the information is essential. A typical report is divided into the following sections, * Executive Summary * Introduction or Purpose * Theory and Analysis * Results and Discussion * Conclusions and Recommendations * References * Attachments and/or Appendices These sections are suitable for many circumstances but may be modified according to need. On the following pages, detailed information about the contents and function of each section is provided. Section headings are aligned with the left-hand margin in a memo and may be simply capitalized and/or given bold or italicized font. Maintain the 12 point type size. Recognize that the format itself is also flexible; however, all the critical elements or information need to be included. The Results and Discussion and Conclusions sections are sometimes...
Words: 1817 - Pages: 8
...ACKNOWLEDGEMENTS First and foremost I would like to thank the Lord Jesus Christ my Lord and Savior for blessing me with an attachment at Econet Wireless. It is only through Him that I have reached this far in my quest for success and knowledge. Secondly I would like thank my dear mother and sister for their unwavering support in my educational endeavors. If it was not for their blessings and guidance I would not have reached where I am this very day. I would also like to express my heartfelt gratitude to Econet Wireless for affording me this opportunity to do my internship at the company. At a time when the Zimbabwean economy is struggling to get back on its feet, the company still finds in itself the desire to give back to the society by helping the young minds of Zimbabwe achieve their dreams. Truly I am grateful. I would like to also thank the staff at Econet Wireless for all the mentoring they gave me throughout this whole attachment period. Their assistance opened up a whole new chapter of understanding for me in the field of accountancy. I owe my deepest gratitude to the Management Accounting team for all their efforts in making me feel at home and a part of the inspired family when I first arrived. The courteous team made my transition to the working environment a whole lot easier and fun. My thanks also goes to the Projects and Fixed assets team for welcoming me as one of their own and for all the training they gave me. Contents ACKNOWLEDGEMENTS...
Words: 10988 - Pages: 44
...University of New England Compliance Management Framework and Procedures Document data: | Document type: | Framework and Procedures | Administering entity: | Audit and Risk Directorate | Records management system number: | D12/50959 | Date approved: | 4th October 2012 | Approved by: | Vice-Chancellor | Indicative time for review: | Maximum 2 years from approval date | Responsibility for review: | Audit and Risk Directorate | Related policies or other documents: | Compliance Policy | | Risk Management Policy and Guidelines | | Code of Conduct | | Records Management Policy | | AS3806- 2006 Compliance programs | Staff contact for advice: | Legal Counsel and Executive Director of GovernanceDirector Audit and Risk | Revision history: | | * Table of Contents Section 1 : Compliance Management Framework 4 1. Purpose 4 2. Scope 4 3. Compliance Management Introduction 4 4. The Policy 7 5. Risk Management 7 6. Compliance Management Process 8 7. Responsibility and Accountability Structure 9 7.1 Overview 9 7.2 Council 9 7.3 Vice-Chancellor and CEO 10 7.4 Executive Management 10 7.5 Managers 11 7.6 Audit and Risk Directorate (ARD) 11 7.7 Employees 12 8. Reporting Responsibilities 12 8.1 Annual Reporting 12 8.2 Obligations Register 12 8.3 Breach reporting and management 13 8.4 External Reporting Requirements 13 9. Annual Compliance Management Calender 14 Section 2 : Compliance...
Words: 9709 - Pages: 39
...I. Introduction The purpose of this report is to explain what I did and learned during my internship period with T and T Holdings Limited. This report is also a requirement for the partial fulfillment of University of Eastern Africa Baraton degree program. The report primarily focuses on the assignments handled, working environment, successes and short comings that the intern did encounter when handling various tasks assigned by supervisor. It is also imperative that recommendations and suggestions be given reflecting on the intern’s shortcomings, successes, observation and comments. II. Description of T and T Financial Sercices T and T holdings limited is a financial institution that started up around 14 April, 2008. It is generally involved in microfinance activities and currently provides three main services or products which are; small business lending, order finance, and salary based lending. 1. Vision To be recognized as being among the best financial service providers providing customers with advice, information and services to meet their financial needs. 2. Mission To make a positive difference in people’s lives through innovative financial products that are trusted and valued 3. Values The values of ministry of finance are; Transparency and Accountability, Professionalism, Impartiality, Teamwork and Responsiveness and Personal integrity. III. Duties and Responsibilities I began my internship program on 15th February, 2011 with T and T. The internship...
Words: 1246 - Pages: 5
...Student Industrial Work Experience Scheme. (SIWES) Uploaded by oyedokun on Jun 05, 2012 OVERVIEW OF THE PROGRAMME (SIWES) The Student Industrial Work Experience Scheme (SIWES) is a skill training program, designed to expose and prepare student in institutions of higher learning for the industrial work situation they are likely to meet after graduation. The scheme is also meant to familiarize students with work methods and exposed them to the needed experience in handling such equipment and machinery that are not available in the educational institutions. It is finance by the federal government and managed by the Industrial Training Fund (ITF). Employers of Labour are very important in the effective running of this scheme. They are to absorb a large number of the SIWES students in their various establishments to acquire the practical training. Students are normally attached to identified industries or companies for a period of three months during the long holiday between 200 level and 300 level, prior to this period, the SIWES officer in the SIWES office of the university would have liaised with the various Industries and companies and the ITF office, The students are paid some sustenance allowance which is usually subsidized by industry. In some cases, lecturers from the University pay scheduled visits to the industries to supervise the student work. Each student is given a SIWES Log Book, in this log book are recorded the students activities and experiences in industries...
Words: 4089 - Pages: 17
