...Jonathan Jimenez NT1110 4/23/2015 Lab 4: Identify Motherboard Components and form factors Task 1: Procedure 1. Examine 2. The LGA 1156 connector is used with the Intel Celeron, Intel Pentium, Intel Core i3, Intel Core i5, Intel Core i7, Intel Xeon processors. Its purpose is that it connects the processor to the motherboard. 3. The Intel H55 Chipset is used with the Intel Core i7-800, Intel Core i5, and Intel Core i3 Processors. Its purpose on the motherboard is to provide interface for the PCI express lanes. 4. The Gigabyte GA-H55M-UD2H motherboard this is mainly our phones iPads, iPods, or iPhones basically this is the technology that apple uses on their devices. From the chips to the small motherboard, USB port and on/off switch. Task 2: Procedure 1. Examine 2. The AMD 770 Northbridge chipset is compatible with the Phenom processors that are designed by ATI for AMD. The purpose of the 770 Northbridge chipset on the motherboard is to link the computer system's hardware to the processor. 3. The processor that is used on the AMD SB710 Southbridge chipset is used with the AMD Phenom processor. Its purpose on the motherboard is that it enables you to play you favorite games without compromise. 4. The Socket AM3 connector is compatible with the Phenom II Processors. Task 3: Procedure 1. Processor | Clock Speed | Internal Cache | Bus Speed | Architecture | i7 | 3.7 GHz | 1.5 MB | 4.8 Gt/s | Bloomfield | i7 mobile | 1.6 GHz | 6 MB | 2...
Words: 544 - Pages: 3
...Lab 4 identify motherboard components and form factors Task 1 1 A. Code name Brand name Model (list) Frequency Cores/Threads Max Memory Speed Lynnfield Core i5 i5-7xx 2.66-2.8 GHz 4/4 DDR3-1333 Core i7 i7-8xx 2.8-3.07 GHz 4/8 Xeon L34xx 1.86 GHz 4/4 or 4/8 X34xx 2.4-2.93 GHz Clarkdale Celeron G1xxx 2.26 GHz 2/2 DDR3-1066 Pentium G6xxx 2.80 GHz 2/2 Core i3 i3-5xx 2.93-3.2 GHz 2/4 DDR3-1333 Core i5 i5-6xx 3.2-3.6 GHz 2/4 B. the LGA 1156 socket allows the following connections to be made from the processor to the rest of the system: PCI-Express 2.0 ×16 for communication with a graphics card. Some processors allow this connection to be divided into two ×8 lanes to connect two graphics cards. Some motherboard manufacturers use NVidia’s NF200 chip to allow even more graphics cards to be used. DMI for communication with the Platform Controller Hub (PCH). This consists of a PCI-Express 2.0 ×4 connection. FDI for communication with the PCH. This consists of two Display Port connections. Two memory channels for communication with DDR3 SDRAM. The clock speed of the memory that is supported will depend on the processor. http://en.wikipedia.org/wiki/LGA_1156 2A. Intel® Core™ i7-800, Intel® Core™ i5, and Intel® Core™ i3 processors B. the H55 (Ibex Peak) is an Intel chipset designed to provide the interface for the PCI express lanes on a motherboard. 3A. Unique On/Off Charge delivers the best recharging capability to iPad, iPhone and iPod...
Words: 589 - Pages: 3
...and Tools Lab 1.1 Record Your Work and Make Deliverables Review Questions 1. What are the eight categories in the Category view in Control Panel? Answer: System and Security Network and Internet Hardware and Sound Programs User Accounts and Family Safety Appearance and Personalization Clock, Language and Region Ease of Access 2. What are the four file types that can be used to save a snip using the Windows Snipping Tool? Answer: Portable Network Graphic file (PNG) (*.PNG) GIF file (*.GIF) JPEG file (*.JPG) Single file HTML (MHT) (*.MHT) 3. The Windows Experience Index rates a computer’s performance on a scale of 1.0 to 7.9. Based on the rating of your computer, what can you conclude about its performance? Answer: The Windows Experience Index rates certain components giving them a sub score. The component with the lowest score is the Windows Score Index Score. In this case the lowest score was for the graphics components, which means that it has a basic graphics chip, instead of high end graphics chip. 4. Search the web for information about the price of Windows 7. How much would it cost to buy your current edition of the Windows 7 operating system as an upgrade from Windows Vista? Answer: About $76.00 for an upgrade Lab 1.2 Gather And Record System Information Review Questions 1. List two categories available in Control Panel that were not mentioned in the lab: Answer: Ease...
Words: 862 - Pages: 4
...First Look at Computer Parts and Tools Lab 1.1 Record Your Work and Make Deliverables Review Questions 1. What are the eight categories in the Category view in Control Panel? 2. What are the four file types that can be used to save a snip using the Windows Snipping Tool? 3. The Windows Experience Index rates a computer’s performance on a scale of 1.0 to 7.9. Based on the rating of your computer, what can you conclude about its performance? 4. Search the web for information about the price of Windows 7. How much would it cost to buy your current edition of the Windows 7 operating system as an upgrade from Windows Vista? Lab 1.2 Gather And Record System Information Review Questions 1. List two categories available in Control Panel that were not mentioned in the lab: 2. Based on the Windows Experience Index, what component of your computer would you upgrade first? Why? 3. Based on what you found while taking inventory of your computer’s system, what maintenance does this computer currently need? 4. Besides the Computer Inventory and Maintenance form, what other documentation should you keep on each computer? How might you store that information? 5. What differences, if any, are there between a list of components derived from a physical inspection versus a list of components derived from Control Panel and System Properties? Lab 1.3 Identify Computer Parts Review Questions ...
Words: 478 - Pages: 2
...Lab 4: Identify Motherboard Components and Form Factors Motherboard 1 1. The purpose of the LGA 1156 Connector is to connect the CPU to the motherboard. The following processors can be connected to it: Intel Celeron Dual-Core 2.27GHz Intel Core i3 2.93GHz - 3.33GHz Intel Core i5 2.4GHz – 3.6GHz Intel Core i7 2.53GHz – 3.06GHz Intel Pentium Dual-Core 2.8GHz – 2.93GHz Intel Xeon 3400 Series 1.86GHz – 3.06GHz 2. The purpose of the Intel H55 chipset is to provide an interface for the PCI express lanes on the motherboard. The following processors are used with it: Intel Core i7 Intel Core i5 Intel Core i3 Intel Pentium Dual-Core 3. The Gigabyte GA-H55M-UD2H motherboard can support six devices which can be fully operational without the need for drivers to be installed as well as an easy BIOS setting for GPU overclocking. Lab 4: Identify Motherboard Components and Form Factors Motherboard 2 1. The purpose of the AMD 770 Northbridge Chipset is to link the hardware to the computer’s processor. The following processors are used with it: AMD Athlon 64/FX/X2 Athlon II Athlon II X2 FX-Series Opteron 3200 Series Opteron 3300 Series Phenom Phenom II 2nd Gen. Opteron Sempron Sempron X2 2. The purpose of the AMD SB710 Southbridge Chipset is to optimize power saving...
Words: 297 - Pages: 2
...Lab 4: Identify Motherboard Components and Form Factors (hands-on) * Motherboard: Is an essential piece of any computer system. It’s what you plug your components into, and what your components use to “talk” to each other. When explaining how computer systems and components work, I like to compare them to that of the human body. How? Because if the CPU (Central Processing Unit) were the brain of the machine, then the motherboard would have to be the nervous system. It works very similarly to the nervous system, in that it essentially coordinates the actions and signals from the CPU (brain) to and from the rest of the machine. A. Motherboard Components: 1. Back panel connectors and Ports: Connectors and ports for connecting the computer to external devices such as display ports, audio ports, USB ports, Ethernet ports, PS/2 ports. 2. PCI SLOTS: PCI: Peripheral Component Interconnect Slot for older expansion cards such as sound cards, network cards, connector cards. See image below for a close-up view. Have been largely replaced by PCI-Express x1 slots (see motherboard parts #3 below). 3. PCI Express x1 slots: Slot for modern expansion cards such as sound cards, network cards (Wi-Fi, Ethernet, and Bluetooth), connector cards (USB, FireWire, eSATA) and certain low-end graphics cards. See image below for a close-up view. 4. PCI Express x16 slots: Slot for discrete graphic cards and high bandwidth devices such as top-end solid state drives. See image below for a...
Words: 523 - Pages: 3
...1 | IT 105 – Computer Hardware Servicing 1/Network Design & Mngt. Laboratory Exercises Republic of the Philippines MINDORO STATE COLLEGE OF AGRICULTURE AND TECHNOLOGY Main Campus Alcate, Victoria, Oriental Mindoro Name: ______________________________ Course & Year: _____________ Laboratory Exercises No. 1 Identifying Parts/Components of Personal Computers Objectives: o o o o o o Identify the components of a PC Identify the desktop components Explain the PC Start up processes Familiarize with the computer Identify the elements of the computer system Identify the first tasks to be performed while troubleshooting PCs Date: _____________ Score:____________ General Directions Read and understand each statement carefully. Write the questions and your answers on your activity sheet. Avoid unnecessary erasures. Use black or blue pen only. Answer the following: 1. What is computer? Give its characteristics, capabilities, and limitations? _____________________________________________________________________________ _____________________________________________________________________________ _____________________________________________________________________________ _____________________________________________________________________________ _____________________________________________________________________________ _____________________________________________________________________________ _____________________________________________________________________________ ...
Words: 12098 - Pages: 49
...ITT TECHNICAL INSTITUTE COMPUTER STRUCTURE AND LOGIC NT1110 LAB 5: Identify Motherboard Components and Form Factors Gus Perez 19593003 Salem, Oregon. Task 1: Results and Deliverables. The LGA 1156 connector LGA 1156, also known as Socket H or H1, is an Intel desktop CPU socket. LGA stands for land grid array. Its incompatible successor is LGA 1155. The 1156 is the number of pins in the socket, its designed to take the 1156 pin processor. What processors is it used with? Intel Celeron, Pentium, Core i3, i5, i7, and Xeon What is its purpose on the motherboard? LGA 1156 socket allows the following connections to be made from the processor to the rest of the system. * PCI-Express 2.0 ×16 for communication with a graphics card * DMI for communication with the Platform Controller Hub (PCH). This consists of a PCI-Express 2.0 ×4 connection * FDI for communication with the PCH, this consists of two display connections * Two memory channels for communication with DDR3 SDRAM Basically the LGA 1156 socket connects the processor with the motherboard. Intel H55 chipset The Chipset shows what the motherboard can possible do or not. Every computer have a Northbridge chipset. It’s main purpose is to make the link between the processor and the rest of the computer (graphic card, USB ports, hard drive, etc.) but the utility of a Northbridge vary from chipset to chipset, some will act also as a graphic card and on others chipsets, they may also manage the...
Words: 1476 - Pages: 6
...Computer Parts and Specifications | 3 | Opening the Tower Case | 4 | Installing the Power Supply | 5 | Installing the Motherboard | 6 | Installing the Processor | 7 | Installing the Memory | 8 | Installing the Hard Drive | 9 | Installing the Optical Drive | 10 | Installing the Operating System | 11 | Installing the Printer | 12 | Troubleshooting | 13 | Report | 14 | Computer Parts and Specifications Component | Manufacturer | Model | Specifications | Motherboard | MSI | A55M-P33 | CPU Socket FM1 • AMD A55 Chipset • DDR3 1066/1333/1600/1866 dual channel memory (16gb MAX) • Integrated USB/Audio/LAN • M-ATX Form Factor | Processor | AMD | A4 3300 | 2.5GHz Dual Core 1MB L2 Cache w/ integrated HD6410D GPU | Memory | Crucial | CT51264BA1339 | 4GB • DDR3 PC3-10600 • CL=9 • Unbuffered • NON-ECC • DDR3-1333 • 1.5V • 512Meg x 64 | Hard Drive | HGST | Z5K500-320 | 320GB • 5400RPM • 8MB Cache • SATA 3.0Gb/s • 2.5” internal | Optical Drive | Lite-On | iHAS124-04 WU | 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM Black SATA Model | Tower Case | SuperCase | TM-302 | 14.25” x 7.2” x 15.4” Dimensions | Power Supply | Allied | SL-8320BTX | 300W 20+4 ping ATX PSU | Operating System | Microsoft | Windows 7 | 64-bit Professional Edition | Follow the sections in this manual to complete the steps necessary to build a PC with the components listed above. Opening the Tower Case Follow the simple procedure...
Words: 1864 - Pages: 8
...Networking GRADED ASSIGNMENTS ------------------------------------------------- Student Professional Experience Project NSA SPE Project 1 (to be completed by the end of NT1310): Install, Configure, Test, Maintain and/or Document the Worksite Local Area Network and Its Components Purpose The purpose of the Student Professional Experience (SPE) project is to provide you an opportunity for work experience in your field or in a related field to add to your résumé. You may have an opportunity to serve your community or work for a local employer for a project that will take between 20 and 30 hours. Project Logistics Career Services will identify an employer with needs in the following areas: Network related tasks (mostly confined to the LAN and Microsoft Windows Server 2008 environments) Students are expected to practice various skills discussed in all the technical courses in Quarters 1 through 3 of the NSA program at an employer’s site on network related tasks (more confined to the LAN and Microsoft Windows Networking with Server 2008 environments) that would involve installation, configuration, testing, maintenance and documentation of the worksite network and its components, and to properly document the technical information in all involved activities. Such documentation will be used as the source material for Items 2 and 3 defined in the Deliverables section of this document. Possible example projects could be (but are not limited to): Install/maintain/upgrade...
Words: 6762 - Pages: 28
...following tasks: * Read simulated component documentation and view components to make appropriate choices to meet the scenario. * Add and remove simulated computer components. * Change views to view and add simulated components. * Use the zoom feature to view additional image details. * Attach simulated cables. * Use the simulation interface to identify where simulated cables connect to the computer. You have been hired as a network technician for a small corporate network. Today is your first day on the job and you need to familiarize yourself with the network. A new employee will work in Office 2 and you need to complete the workstation in the office. Complete the following tasks in Office 2: * Add the monitor to the office (next to the computer). * Use the DVI-D cable to connect the monitor to the computer. * Connect the power cord to the monitor and plug in the monitor. * Add the mouse to the office, and connect the mouse's USB cable to a USB port on the computer. * Add the keyboard to the office, and connect the keyboard's USB cable to a USB port on the computer. * Turn on the monitor and the computer. Tip: Click the following button shown in Office 2 to go to the workstation: | | Watch the preceding demonstration to see how to complete any of these tasks. Once you have completed all of the assigned tasks, feel free to explore the hardware and operating system interfaces within the lab. Click the Done button when you...
Words: 11760 - Pages: 48
...variety of opinion about the content of the topics, but for the beginner it is the best which gives the time and opportunity to become familiar with the basics before pursuing further into the field of study in greater detail at the upper secondary level Ministry of Education, Suva. Fiji Islands 28th November 2013. Year 11 Computer Education 2 Acknowledgement This textbook for year 11 Computer Education has been produced by the Computer Education Section of the Technology and Employment Skills Training (TEST) section of the Ministry of Education. It has been written and compiled by writer’s panel comprising of Computer Studies officers and USP lectures: 1. Dr Bibya Sharma(USP) 2. Mr Shaveen Singh (USP) 3. Mr Vijay Singh(USP) 4. Mr Paula Sovakiwai (SGS) 5. Mrs Rihana Hussain (SGS) Graphic design & Type-set: 1. Emily Nadike...
Words: 20027 - Pages: 81
...CompTIA A+ Certification Exam Objectives EXAM NUMBER: 220-901 About the Exam Candidates are encouraged to use this document to help prepare for CompTIA A+ 220-901. In order to receive the CompTIA A+ certification, you must pass two exams: 220-901 and 220-902. CompTIA A+ 220-901 measures the necessary skills for an entry-level IT professional. Successful candidates will have the knowledge required to: • Assemble components based on customer requirements • Install, configure and maintain devices, PCs and software for end users • Understand the basics of networking and security/forensics • Properly and safely diagnose, resolve and document common hardware and software issues • Apply troubleshooting skills • Provide appropriate customer support • Understand the basics of virtualization, desktop imaging and deployment These content examples are meant to clarify the test objectives and should not be construed as a comprehensive listing of all the content of this examination. EXAM ACCREDITATION CompTIA A+ is accredited by ANSI to show compliance with the ISO 17024 Standard and, as such, undergoes regular reviews and updates to the exam objectives. EXAM DEVELOPMENT CompTIA exams result from subject matter expert workshops and industry-wide survey results regarding the skills and knowledge required of an entry-level IT professional. CompTIA AUTHORIZED MATERIALS USE POLICY CompTIA Certifications, LLC is not affiliated with and does not authorize, endorse or condone...
Words: 4474 - Pages: 18
...TASK 1 AbaKus Technology Interest Group at IIMK INTRODUTION Founded on July 18, 1968 by Robert Noyce and Gordon Moore, Intel manufactures the Intel computer processors, Intel Overdrive CPU upgrades, networking devices, and is considered by most to be 'the' company that has influenced the hardware market. The Company offers platforms that incorporate various components and technologies, including a microprocessor and chipset, a stand-alone system-on-chip (SoC) or a multichip package. The Company offers microprocessors with one or multiple processor cores. In addition, its Intel Core processor families integrate graphics functionality onto the processor die. The Company offers and develops SoC products that integrate the Company’s central processing units (CPU) with other system components, such as graphics, audio, imaging, communication and connectivity, and video, onto a single chip. The Company offers a multichip package that integrates the chipset on one die with the CPU and graphics on another die, connected through an on-package interface. The Company also offers fifth generation Intel Core processor, code-named Broadwell. The Company offers manufacturing technologies and design services for its customers. Its foundry offerings include full custom silicon, packaging, and manufacturing test services. It also provides semi-custom services to tailor Intel architecture-based solutions with customers' intellectual property blocks. The Company also offers design kits, intellectual...
Words: 5624 - Pages: 23
...to be false, disciplinary action could be taken and penalties imposed in accordance with University policy and rules. Signature: Sanjaykumar Natverbhai Patel Table of Contents: * Introduction……………………………………………………………………………………………….2 1.1 Introduction about product and its key feature and characteristics……….3 2 Customer satisfaction………………………………………………………………………………..4 2.1 Identify Stockholders and their expectations………………………………………..5 2.2 Method of capturing customers’ needs…………………………………………………6 2.3 Kano analysis on capturing customer needs………………………………………….7 3 Design Requirements…………………………………………………………………………………8 4.1 Quality Function Deployment of identified customer needs…………………9 3.2 Failure Mode and Effect Analysis of top five customer needs………………10 4 Supplier selection and Evaluation……………………………………………………………..11 5.2 Identify components , parts ………………………………………………………………..12 4.2 Selection criteria for components supplier………………………………………….13 4.3 Supplier selection system…………………………………………………………………….14 4.4 Outcome of supplier selection process………………………………………………..15 4 Statistical Process Control…………………………………………………………………………16 5.1 Process identification…………………………………………………………………………..17 5.2 Statistical Control Chart………………………………………………………………………18...
Words: 6043 - Pages: 25
