Free Essay

Manager

In:

Submitted By moreno63
Words 15860
Pages 64
Parts Manual

BusSB-210+ Accessories Additional text information & Options to be placed here
TK 5XXXX-X-PL TK 54309-3-PM (Rev. 1.0)

Bus Accessories & Options
TK 54309-1.0 Pri nt ed (
Friday, September 09, 2011) Copyright©2010 Thermo King Corp. - Minneapolis, MN, U.S.A.

Printed (September 9, 2011)
Copyright © 2010 - Thermo King Corp. - Minneapolis, MN U.S.A. Electronically printed in U.S.A.

General Information
Tables of Contents This Parts Manual contains a numerical table of contents listing each assembly name, its associated Grid number and page number. The numerical table of contents is arranged numerically by Grid number. There are references in a parts list referring to other Grid numbers, the numerical table of contents is arranged to facilitate finding the referenced illustrations. At the rear of this parts manual are two indexes, a numerical and alphabetical. The indexes contain all of the part numbers and descriptions which appear in this manual.

Assemblies and Subassemblies When parts are indented in the description list, they are preceded with a bullet ( • ). This indicates that the part(s) is available separately or included in an assembly.

GRID NO. 67D6 SWITCH PANEL ASSEMBLY
REF 1 PART# 45-1239 99-1960 99-6280 2 33-743 DESCRIPTION PANEL - assy, switch QTY 1 1 1 1

• PANEL • • NAMEPLATE - panel • GASKET

For example: the switch panel nameplate (99-6280) is available separately, available as part of the switch panel (99-1960) and with the panel assembly (45-1239).

ABBREVIATIONS
A

The following abbreviations appear in parts manuals
E (continued) evap . . . . . . . . exch . . . . . . . . exp . . . . . . . . . ext . . . . . . . . . F. . . . . . . . . . . fill . . . . . . . . . . fi . . . . . . . . . . . fl . . . . . . . . . . . fpt . . . . . . . . . . evaporator exchanger expansion external O os . . . . . . . . . . oversized od . . . . . . . . . . outside diameter P pcb . . . . . . . . . printed circuit board pkg . . . . . . . . . package ph . . . . . . . . . . phase pos . . . . . . . . . positive psi . . . . . . . . . . pounds per square inch rad . . . . . . . . . radiator rcvr . . . . . . . . . receiver ref . . . . . . . . . . reference reg . . . . . . . . . regulator req . . . . . . . . . required rpm . . . . . . . . . revolutions per minute sec . . . . . . . . . second sld . . . . . . . . . . solder soc hd . . . . . . . socket head sol . . . . . . . . . . solenoid spl . . . . . . . . . . special sq . . . . . . . . . . square ss . . . . . . . . . . stainless steel std. . . . . . . . . . standard stl . . . . . . . . . . steel suct . . . . . . . . . suction sw . . . . . . . . . . switch term . . . . . . . . terminal temp . . . . . . . . temperature thk. . . . . . . . . . thick

AC . . . . . . . . . alternating current A/R . . . . . . . . as required accum . . . . . . accumulator adj . . . . . . . . . adjusting al . . . . . . . . . . aluminum alt. . . . . . . . . . alternator A or amp . . . . ampere assy . . . . . . . . assembly bd . . . . . . . . . brg . . . . . . . . . brkr . . . . . . . . brkt . . . . . . . . board bearing breaker bracket

F

B

Farenheit fillister fuel injection flare female pipe thread ft . . . . . . . . . . . feet ftg . . . . . . . . . . fitting hexagon hexagon head head horsepower housing

R

C

C . . . . . . . . . . Celsius cw . . . . . . . . . clockwise ccw . . . . . . . . counterclockwise cam . . . . . . . . camshaft compr . . . . . . compressor cond. . . . . . . . condenser conn. . . . . . . . connecting, connector cyl . . . . . . . . . cylinder def . . . . . . . . . deg . . . . . . . . dehyd. . . . . . . dia . . . . . . . . . DC . . . . . . . . . disch . . . . . . . diff . . . . . . . . . defrost degree dehydrator diameter direct current discharge differential

H hex . . . . . . . . . hh . . . . . . . . . . hd . . . . . . . . . . hp . . . . . . . . . . hsg . . . . . . . . . I

S

D

id . . . . . . . . . . inside diameter in . . . . . . . . . . inch (2.54 centimeters) incl . . . . . . . . . includes inj . . . . . . . . . . injection int . . . . . . . . . . internal int th . . . . . . . . internal tooth liq . . . . . . . . . . liquid lg . . . . . . . . . . long T

L

E

EMI . . . . . . . . Extended . . . . . . . . . . . Maintenance Interval EEC . . . . . . . . European Economic Community eng . . . . . . . . engine

M mm . . . . . . . . . milimeter mpt . . . . . . . . . male pipe thread mod . . . . . . . . modulating N neg . . . . . . . . . No. . . . . . . . . . NS . . . . . . . . . NSS . . . . . . . . negative number not supplied not sold separately

U us . . . . . . . . . . undersize V vib . . . . . . . . . . vibrasorber

W W . . . . . . . . . . watt w/ . . . . . . . . . . with w/o . . . . . . . . . without

Bus Accessories & Options Contents
Name Grid Page
BUS ACCESSORIES & OPTIONS REFERENCE SHEET . . . . . . . . . .13U83. . . . . . . . . . . . . . . . . . . . .5 COMPRESSOR GROUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98C13. . . . . . . . . . . . . . . . . . . .81 COMPRESSOR GROUP (TM16-XD & HD DM) . . . . . . . . . . . . . . . . . .133F14 . . . . . . . . . . . . . . . . . . .91 CLUTCH REPAIR KIT (SMALL, 6.0 DIA COIL). . . . . . . . . . . . . . . . . . .153E8 . . . . . . . . . . . . . . . . . . .125 FLOOR HEATER TKV 800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159A8 . . . . . . . . . . . . . . . . . . . .15 TM-16 COMPRESSOR & HOSE KITS . . . . . . . . . . . . . . . . . . . . . . . . .164A2 . . . . . . . . . . . . . . . . . . .105 TM31 COMPRESSOR & HOSE KITS . . . . . . . . . . . . . . . . . . . . . . . . . .164A3 . . . . . . . . . . . . . . . . . . . .85 X640 COMPRESSOR ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . .177H6. . . . . . . . . . . . . . . . . . .115 COMPRESSOR GROUP (TM16-XD & HD DM) . . . . . . . . . . . . . . . . . .179A7 . . . . . . . . . . . . . . . . . . . .89 COMPRESSOR GROUP (TM16, KIT 718371, 718373) . . . . . . . . . . . .181D4. . . . . . . . . . . . . . . . . . .103 CONVECTOR - FRONT LEFTSIDE (1E06001G01) . . . . . . . . . . . . . . .181E4 . . . . . . . . . . . . . . . . . . . .53 CONVECTOR - FRONT RIGHTSIDE (1E05996G01/G02/G03/G04) . .181E5 . . . . . . . . . . . . . . . . . . . .55 CONVECTOR - MIDDLE LEFTSIDE (1E06000G01/G02) . . . . . . . . . .181E6 . . . . . . . . . . . . . . . . . . . .57 CONVECTOR - MIDDLE RIGHTSIDE (1E05997G01/G02) . . . . . . . . .181E7 . . . . . . . . . . . . . . . . . . . .59 CONVECTOR - BACK LEFTSIDE (1E05999G01) . . . . . . . . . . . . . . . .181E8 . . . . . . . . . . . . . . . . . . . .61 CONVECTOR - BACK RIGHTSIDE (1E05998G01) . . . . . . . . . . . . . . .181E9 . . . . . . . . . . . . . . . . . . . .63 COMPRESSOR GROUP - TM21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184E4 . . . . . . . . . . . . . . . . . . . .87 COMPRESSOR GROUP - TM31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184G8. . . . . . . . . . . . . . . . . . . .83 MOTOR DRIVE - POWER STUD CLEANUP KIT (40-885). . . . . . . . . .187F2 . . . . . . . . . . . . . . . . . . . .13 COMPRESSOR GROUP (KIT 720190 & 720191) . . . . . . . . . . . . . . . .190A0 . . . . . . . . . . . . . . . . . . . .95 CONVECTOR KIT (720048) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190C3. . . . . . . . . . . . . . . . . . . .43 CONVECTOR KIT (720049) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190C4. . . . . . . . . . . . . . . . . . . .45 COMPRESSOR GROUP (TM16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190D6. . . . . . . . . . . . . . . . . . .101 FORCED AIR CONVECTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195C7. . . . . . . . . . . . . . . . . . . .29 COMPRESSOR GROUP (TM16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202G0. . . . . . . . . . . . . . . . . . . .99 CONVECTOR KIT (720155) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203F2 . . . . . . . . . . . . . . . . . . . .47 CONVECTOR KIT (720157) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203F3 . . . . . . . . . . . . . . . . . . . .51 CONVECTOR KIT (700784) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216B6 . . . . . . . . . . . . . . . . . . . .31 CONVECTOR KIT (700785) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216B7 . . . . . . . . . . . . . . . . . . . .33 CONVECTOR KIT (700786) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216B8 . . . . . . . . . . . . . . . . . . . .35 CONVECTOR KIT (700787) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216B9 . . . . . . . . . . . . . . . . . . . .39 COMPRESSOR GROUP (TM16-XD) . . . . . . . . . . . . . . . . . . . . . . . . . .229F6 . . . . . . . . . . . . . . . . . . . .97 COMPRESSOR GROUP - TM31 (2C35549G04, KIT 718377). . . . . . .232F2 . . . . . . . . . . . . . . . . . . . .79 IDLER PULLEY (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232H6. . . . . . . . . . . . . . . . . . . .11 WALL HEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233F9 . . . . . . . . . . . . . . . . . . . . .9 CONVECTOR KIT (701984) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238E8 . . . . . . . . . . . . . . . . . . . .41 CONVECTOR (1E45807G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240D0. . . . . . . . . . . . . . . . . . . .25 CONVECTOR KIT (701343) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240D5. . . . . . . . . . . . . . . . . . . .17 CONVECTOR (1E45810G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240D6. . . . . . . . . . . . . . . . . . . .19 CONVECTOR (1E45809G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240D7. . . . . . . . . . . . . . . . . . . .21 CONVECTOR (1E46607G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240D9. . . . . . . . . . . . . . . . . . . .23 CONVECTOR (1E46606G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240E1 . . . . . . . . . . . . . . . . . . . .27 TEMPERATURE CONTROL KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242E0 . . . . . . . . . . . . . . . . . . .109 COMPRESSOR GROUP (2C45049G24, KIT 702159) . . . . . . . . . . . . .242F1 . . . . . . . . . . . . . . . . . . .111 VALVE ASSEMBLY - SUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242F2 . . . . . . . . . . . . . . . . . . .121 VALVE ASSEMBLY - DISCHARGE . . . . . . . . . . . . . . . . . . . . . . . . . . .242F3 . . . . . . . . . . . . . . . . . . .123 CONVECTOR (1E56353G01 & 1E56353G02) . . . . . . . . . . . . . . . . . . .251C0. . . . . . . . . . . . . . . . . . . .71 CONVECTOR (1E55603G01 & 1E56356G01) . . . . . . . . . . . . . . . . . . .251C7. . . . . . . . . . . . . . . . . . . .65 CONVECTOR (1E55607G02 & 1E56357G01) . . . . . . . . . . . . . . . . . . .251C8. . . . . . . . . . . . . . . . . . . .67 CONVECTOR (1E56269G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251C9. . . . . . . . . . . . . . . . . . . .69

Bus Accessories & Options Contents
Name Grid Page
CONVECTOR (1E55970G01 & 1E55970G02) . . . . . . . . . . . . . . . . . . .251D1. . . . . . . . . . . . . . . . . . . .73 CONVECTOR (1E60709G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251D2. . . . . . . . . . . . . . . . . . . .75 CONVECTOR (1E60710G01) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251D3. . . . . . . . . . . . . . . . . . . .77

Bus Accessories & Options Contents
Name Grid Page

13U83
BUS ACCESSORIES & OPTIONS REFERENCE SHEET 13U83 9/9/11

BUS ACCESSORIES & OPTIONS REFERENCE SHEET

Revised 9/9/11

5

Revised 9/9/11

BUS ACCESSORIES & OPTIONS REFERENCE SHEET
DESCRIPTION Motor Drive - Power Stud Cleanup Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Convector Kit Wall Heater Idler Pulley Kit Temperature Control Kit Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-16 Date 7/09 7/09 7/09 7/09 7/09 9/09 3/11 3/11 3/11 3/11 3/11 3/11 3/11 7/09 7/09 7/09 7/09 7/09 7/09 7/09 7/09 7/09 7/09 7/09 7/09 1/09 7/09 1/10 10/09 10/09 10/09 10/09 10/09 10/09 10/09

13U83

B/M 40-885 700784 700785 700786 700787 701343 701840 701841 701842 702087 702088 702259 702345 720048 720049 720064 720065 720066 720067 720155 720157 720437 720438 720439 720440 720465 772935 702181 701157 701158 701159 701160 718115 718116 718117

6

13U83
B/M 718118 718370 718371 718372 718373 701161 720280 720281 720282 720283 720284 720285 720286 720287 720288 720289 720290 720291 715637 715638 718376 718377 719221 719222 719223 719224 719717 719718 719719 719740 702159 DESCRIPTION

BUS ACCESSORIES & OPTIONS REFERENCE SHEET
Date 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 10/09 1/10

Revised 9/9/11

Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-16 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-21 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit TM-31 Compressor Kit - X640

7

Revised 9/9/11

BUS ACCESSORIES & OPTIONS REFERENCE SHEET

13U83

8

233F9
WALL HEATER 233F9 7/10/09

WALL HEATER

Revised 7/10/09

9

Revised 7/10/09

WALL HEATER

233F9
QTY
1 1 1 2 2 1 1 1 2 1 1 1 2 2 2 2

REF
1 2

PART#
67-2412 78-1549 44-5835 44-6324 COIL - heater

DESCRIPTION
BLOWER - assembly (24v)

• CONNECTOR - shroud (2 pin, see 115D14) • SEAL - cable (blue, 12-14 ga)
FILTER (with frame) HARNESS - blower motor

3 4

92-7368 41-8570 44-5838 44-7881 55-2330 44-7812 44-2792 44-2791 55-3020 55-396 55-2001 55-2965

• CONNECTOR - tower (2 pin) • CONNECTOR - tower (4 pin) • BANDWRAP • PLUG - cavity (green) • TERMINAL - ring (yellow, #10) • TERMINAL - ring (blue #10, 14-16 ga)
SCREW LOCKWASHER FLATWASHER NUT

10

232H6
IDLER PULLEY (OPTIONAL) 232H6 9/9/11

IDLER PULLEY (OPTIONAL)

Revised 9/9/11

11

Revised 9/9/11

IDLER PULLEY (OPTIONAL)

232H6
QTY
1 1 1 1 1 1 1 1 1 1 1 1

REF
1 2 3 4 5 6 7 8 9 10 11 NOTE:

PART#
77-2935 77-2940 77-2941 33-1162 77-2942 33-1924 55-4702 77-2389 77-2942 55-4021 33-2134 77-2943

DESCRIPTION
IDLER - pulley mount assembly (see note)

• PLATE - mount • BUSHING • O-RING • PULLEY - complete •• SEAL •• RING - retainer •• BEARING •• PULLEY (5 V-groove) •• FITTING - grease •• SEAL •• SPINDLE - hub

This pulley kit is not for the Thermo King AC system it's for the bus drive system.

12

187F2
MOTOR DRIVE POWER STUD CLEANUP KIT (40885) 187F2 7/30/08

MOTOR DRIVE - POWER STUD CLEANUP KIT (40885)

Revised 7/30/08

13

Revised 7/30/08

MOTOR DRIVE - POWER STUD CLEANUP KIT (40885)

187F2
QTY
1 1 1 1 1 1 1 1 1 1 1 2 1 1

REF
1 2 3 4 5 6 7 8 9

PART#
40-885 41-5674 41-5673 55-448 41-5672 41-5671 55-2641 55-2363 55-671 41-5670 203-524

DESCRIPTION
KIT - power stud cleanup

• SPACER - brass • SLEEVE - insulating • FLATWASHER • TERMINAL • SLEEVING - heat shrink • FLATWASHER • LOCKWASHER • NUT - brass • CAP - insulator • SUPERLUBE (3.0 oz)
FILTER - RFI DRIVE - motor DRIVE - motor (remanufactured)

10 11

41-8321 41-3590 841-3590

14

159A8
FLOOR HEATER TKV 800 159A8 3/28/00

FLOOR HEATER TKV 800

Revised 3/28/00

15

Revised 3/28/00

FLOOR HEATER TKV 800

159A8
QTY
1 1 1 A/R A/R A/R A/R

REF
1 2 3 4 5 6 7

PART#
NSS NSS 61-1099 92-230 92-233 92-2647 92-232 CONVECTOR COVER VALVE - bleed BRACKET (lower) BRACKET GASKET - extruded BRACKET (upper)

DESCRIPTION

16

240D5
CONVECTOR KIT (701343) 240D5 10/12/09

CONVECTOR KIT (701343)

Revised 10/12/09

17

Revised 10/12/09

CONVECTOR KIT (701343)

240D5
QTY
1 1 1 1 1

REF
1 2 3 4 5

PART#
NSS NSS NSS NSS NSS

DESCRIPTION
CONVECTOR - TKV 800 (roadside front, see 240D6) CONVECTOR - FAC/TKV (roadside center, see 240D7) CONVECTOR - TKV 800 (rear roadside, see 240D9) CONVECTOR - FAC/TKV (front curbside, see 240D0) CONVECTOR - TKV 800 (rear curbside, see 240E1)

18

240D6
CONVECTOR (1E45810G01) 240D6 9/9/11

CONVECTOR (1E45810G01)

Revised 9/9/11

19

Revised 9/9/11

CONVECTOR (1E45810G01)

240D6
QTY
1 1 1 A/R 6 6 2 1 1 A/R 1 1 2 38

REF
1 2 3 4 5 6 7 8 9 10 11 12 13

PART#
NSS 92-8085 92-8086 92-7767 92-2647 92-2651 51-262 NSS 61-1099 92-8084 92-3057 92-3431 51-773 51-1227

DESCRIPTION
CONVECTOR - TKV 800 (roadside front)

• BRACKET - wall right • BRACKET - wall left • BRACKET - fasting profile (4ft lg piece) • SLIDER • BRACKET • CLAMP • COIL - heater • VALVE - deaerate • COVER (8 ft lg) • CAP - end piece (roadside front) • UNION (roadside, center) • RIVET - plastic • RIVET - steel

20

240D7
CONVECTOR (1E45809G01) 240D7 9/9/11

CONVECTOR (1E45809G01)

Revised 9/9/11

21

Revised 9/9/11

CONVECTOR (1E45809G01)

240D7
QTY
1 A/R 1 1 3 1 1 7 36 A/R 4 4 4 1 1 1 1 1 1 1 2 1 1 A/R A/R A/R 1

REF
1 2 3 4 5 6 7 8 9 10 11 12 13 14

PART#
NSS 92-8083 NSS 92-3430 51-773 92-3431 92-8085 51-262 51-1227 92-8083 92-2650 92-2647 92-2649 92-3056 92-5033 55-2330

DESCRIPTION

15 16

78-1399 NSS 44-9569

17 18 19 20 21 22 23 24

92-8087 55-5130 33-2212 33-282 99-7336 92-3185 92-3279 92-4105

• CONVECTOR - FAC\TKV (roadside center) • COVER (4 ft lg) • COIL - heater • UNION (right) • RIVET - plastic • UNION (left) • BRACKET - wall end • CLAMP • RIVET - steel • COVER (4 ft lg) • BRACKET - top • SLIDER • BRACKET - bottom • CAP - end piece (left) • MOUNT - bandwrap • BANDWRAP • BLOWER • HEATER - coil • CONNECTOR - shroud (3 pin, see 115D14 for connectors) • BRACKET - wall • RIVET - steel • GROMMET (3/16 id) • GROMMET (3/8 id) • STRIP - neoprene • STRIP - neoprene • EXTRUSION (rubber) • STIFFENER

22

240D9
CONVECTOR (1E46607G01) 240D9 9/9/11

CONVECTOR (1E46607G01)

Revised 9/9/11

23

Revised 9/9/11

CONVECTOR (1E46607G01)

240D9
QTY
1 A/R 1 1 1 1 2 2 2 2 2 A/R 1 1 18

REF
1 2 3 4 5 6 7 8 9 10 11 12 13 14

PART#
NSS 92-8083 92-3056 92-3430 NSS 61-1099 51-773 92-2649 92-2650 92-2647 51-262 92-7767 92-8085 92-8086 51-1227

DESCRIPTION
CONVECTOR - TKV 800 (roadside rear)

• COVER (4ft lg) • CAP - end piece (left) • UNION (right) • COIL - heater • VALVE - dearate • RIVET - plastic • BRACKET - bottom • BRACKET - top • SLIDER • CLAMP • BRACKET - fasting profile (4ft lg) • BRACKET - wall • BRACKET - wall end • RIVET

24

240D0
CONVECTOR (1E45807G01) 240D0 9/9/11

CONVECTOR (1E45807G01)

Revised 9/9/11

25

Revised 9/9/11

CONVECTOR (1E45807G01)

240D0
QTY
1 A/R 1 1 A/R 1 3 A/R 1 2 2 2 2 1 1 1 1 47 4 4 1 4 6 2 11 1 2 A/R A/R

REF
1 2 3 4 5 6 7 8

PART#
NSS 92-8084 92-3056 92-3431 92-8084 92-3430 51-773 99-7336 41-9163 44-6959 44-9569

DESCRIPTION
CONVECTOR - FAC/TKV (curbside front)

9

78-1399 44-9569

10 11 12 13 14

NSS NSS 92-8088 92-8085 51-1227 55-5130

15 16 17 18 19 20 21 22 23 24

51-294 92-2649 92-2650 92-2647 92-2651 51-262 92-5033 92-4105 92-3279 33-3812

• COVER (8 ft lg) • CAP - end • UNION - middle • COVER (8ft lg) • UNION - end • RIVET - plastic • STRIP - neoprene • HARNESS - blower (for connectors see 115D14) •• CONNECTOR - tower (3 pin) •• CONNECTOR - shroud (3 pin) • BLOWER •• CONNECTOR - shroud (3 pin see 115D14 for connectors) • COIL - heater • COIL - heater • BRACKET - back wall • BRACKET - back wall end • RIVET (3.2 mm) • RIVET (5/32) • CLAMP - slider • BRACKET - bottom • BRACKET - top • SLIDER • BRACKET • CLAMP • MOUNT - cable tie • STIFFENER • EXTRUSION (rubber) • STRIP

26

240E1
CONVECTOR (1E46606G01) 240E1 9/9/11

CONVECTOR (1E46606G01)

Revised 9/9/11

27

Revised 9/9/11

CONVECTOR (1E46606G01)

240E1
QTY
1 A/R 1 1 1 1 2 2 2 2 2 A/R 1 1 18

REF
1 2 3 4 5 6 7 8 9 10 11 12 13 14

PART#
NSS 92-8083 92-3057 92-3431 NSS 61-1099 51-773 92-2649 92-2650 92-2647 51-262 92-7767 92-8085 92-8086 51-1227

DESCRIPTION
CONVECTOR - TKV 800 (curbside rear)

• COVER (4 ft lg) • CAP - end piece • UNION • HEATER - coil • VALVE - dearate • RIVET - plastic • BRACKET - bottom • BRACKET - top • SLIDER • CLAMP • BRACKET - fasting profile (4 ft) • BRACKET - wall • BRACKET - wall (end) • RIVET

28

195C7
FORCED AIR CONVECTOR 195C7 7/2/04

FORCED AIR CONVECTOR

Revised 7/2/04

29

Revised 7/2/04

FORCED AIR CONVECTOR

195C7
QTY
1 2 3 3 1 A/R 3 1 2 1 1 1 1 1 A/R 1 6 1 A/R A/R A/R A/R

REF
1 2 3 4 5 6 7 8 9 10

PART#
98-6928 51-294 92-4103 92-4104 92-4105 55-3010 92-4106 NSS 51-773 92-3056 92-3057 67-2029 67-2030 67-2031 55-5130 WALL - back CLAMP - slider PROFILE - fastening BRACKET - bottom STIFFENER

DESCRIPTION

RIVET - clamp, profile, bracket & stiffener WASHER COVER - front RIVET (plastic) COVER - end COVER - end HEATER HEATER HEATER RIVET - heater BLOWER (24V) CLAMP GROMMET (0.188 id) EXTRUSION (rubber) STRIP (neoprene) STRIP (neoprene) TAPE (vinyl)

11 12 13 14 15 16 17

78-1399 51-262 33-2212 91-7754 99-6968 91-9862 92-4107

30

216B6
CONVECTOR KIT (700784) 216B6 10/14/10

CONVECTOR KIT (700784)

Revised 10/14/10

31

Revised 10/14/10

CONVECTOR KIT (700784)

216B6
QTY
1 1 1 1 4 8 1 1 2 5 10 1 A/R 6 1 1 1 1 3 4 2 6 24 4 8 10 4 8 10 12 4 2 1 2 2 A/R A/R 1 1 2

REF
1 2 3 4

PART#
67-2148 67-2286 98-6767 98-7317 55-3669 55-2012 HEATER - assy HEATER - assy COVER - back COVER - back RIVET - cover RIVET - cover COVER - front COVER - front RIVET - cover, plastic CLAMP - slider RIVET - clamp TKV 800 SLOT - open RIVET - slot COVER - end COVER - middle COVER - middle COVER - end HOLDER - open slot RIVET - holder BLOWER BRACKET RIVET - bracket BRACKET - top RIVET - bracket SLIDER BRACKET - bottom RIVET - bracket SLIDER - bottom CLAMP

DESCRIPTION

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

NSS NSS 51-773 51-294 55-1714 NSS 92-3410 51-257 92-3432 92-3431 92-3430 923057 92-6096 55-2012 78-1399 92-2651 51-1227 92-2650 55-1714 92-2647 92-2649 55-1714 92-2648 51-262 33-2212 33-282 33-2440 92-5033 55-2330 91-9862 33-2975 41-5760 44-9569 41-2769

GROMMET (0.188 id) GROMMET (0.375 id) GROMMET (1.125 id) MOUNT - bandwrap BANDWRAP STRIP - neoprene STRIP - neoprene HARNESS - convector

• CONNECTOR (3 terminal) • CONNECTOR (4 pin, female)

32

216B7
CONVECTOR KIT (700785) 216B7 10/14/10

CONVECTOR KIT (700785)

Revised 10/14/10

33

Revised 10/14/10

CONVECTOR KIT (700785)

216B7
QTY
1 1 4 1 2 3 6 A/R 4 1 1 2 3 6 3 3 6 3 10 2 2 1 1 A/R A/R A/R 1 1 2

REF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

PART#
67-2285 98-7706 55-5130 NSS 51-773 51-294 51-1227 92-3410 51-257 92-3056 92-3057 78-1399 92-2650 51-1227 92-2647 92-2649 51-1227 92-2648 51-262 33-2212 33-282 92-5033 56-2330 91-9862 33-2975 92-3185 41-7669 41-4949 41-2769 HEATER - assy COVER - back RIVET - cover COVER - front RIVET - cover, plastic CLAMP - slider RIVET - clamp SLOT - open RIVET - slot COVER - end COVER - end BLOWER BRACKET RIVET - bracket SLIDER BRACKET - bottom RIVET - bracket SLIDER - bottom CLAMP

DESCRIPTION

GROMMET (0.188 id) GROMMET (0.375 id) MOUNT - bandwrap BANDWRAP STRIP - neoprene STRIP - neoprene STRIP - neoprene HARNESS - convector

• CONNECTOR (4 pin, male) • CONNECTOR (4 pin, female)

34

216B8
CONVECTOR KIT (700786) 216B8 11/1/06

CONVECTOR KIT (700786)

Revised 11/1/06

35

Revised 11/1/06

CONVECTOR KIT (700786)

216B8
QTY
1 1 1 1 4 8 1 1 2 5 10 1 1 1 1 1 2 4 16 6 12 10 6 12 10 12 3 2 2 4 2 2 2 2 A/R 8 2 2 4 4 A/R 2

REF
1 2 3 4

PART#
67-2283 67-1894 98-7240 98-7705 55-5130 51-1227 HEATER - assy HEATER - assy COVER - back COVER - back RIVET - cover RIVET - cover COVER - front COVER - front RIVET - cover, plastic CLAMP - slider RIVET - clamp TKV 800 COVER - end COVER - middle COVER - middle COVER - end BLOWER BRACKET RIVET - bracket BRACKET - top RIVET- bracket SLIDER BRACKET - bottom RIVET - bracket SLIDER - bottom CLAMP

DESCRIPTION

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

NSS NSS 51-773 51-294 51-1227 NSS 92-3432 92-3431 92-3430 92-3057 78-1399 92-2651 51-1227 92-2650 51-1227 92-2647 92-2649 51-1227 92-2648 51-262 33-2212 33-282 92-4105 51-1227 92-2642 55-9876 55-8310 51-296

GROMMET (0.188 id) GROMMET (0.375 id) STIFFENER RIVET - stiffener COVER SCREW - cover LOCKWASHER INSERT HOSE - silicone CLAMP - hose MOUNT - bandwrap BANDWRAP CLAMP (with glue) BANDWRAP STRIP - neoprene STRIP

24 25 26 27 28 29

92-5032 51-1229 92-5033 55-2330 92-5031 51-1228 33-2975 92-6094

36

216B8

CONVECTOR KIT (700786)

Revised 11/1/06

37

Revised 11/1/06

CONVECTOR KIT (700786)

216B8
QTY
A/R A/R 1 1 2

REF
30 31 32 33 34

PART#
92-3185 91-7754 41-5760 44-9569 41-2769 STRIP - neoprene EXTRUSION - rubber

DESCRIPTION

HARNESS - convector

• CONNECTOR - shroud (3 pin) • CONNECTOR (4 pin, female)

38

216B9
CONVECTOR KIT (700787) 216B9 11/1/06

CONVECTOR KIT (700787)

Revised 11/1/06

39

Revised 11/1/06

CONVECTOR KIT (700787)

216B9
QTY
1 1 2 1 2 2 4 1 1 1 2 4 2 2 4 2 6 1 A/R A/R

REF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART#
67-2284 98-7242 55-5130 NSS 51-773 51-294 51-1227 92-3056 92-3057 78-1399 92-2650 51-1227 92-2647 92-2649 51-1227 92-2648 51-262 33-2212 33-2975 92-3185 HEATER - assy COVER - back RIVET - cover COVER - front RIVET - cover, plastic CLAMP - slider RIVET - clamp COVER - end COVER - end BLOWER BRACKET RIVET - bracket SLIDER BRACKET - bottom RIVET - bracket SLIDER - bottom CLAMP

DESCRIPTION

GROMMET (0.188 id) STRIP - neoprene STRIP - neoprene

40

238E8
CONVECTOR KIT (701984) 238E8 9/28/09

CONVECTOR KIT (701984)

Revised 9/28/09

41

Revised 9/28/09

CONVECTOR KIT (701984)

238E8
QTY
1 2 3 3 1 A/R A/R A/R 2 1 1 1 A/R 1 6 1 A/R A/R A/R

REF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART#
98-6920 51-294 92-4103 92-4104 92-4105 55-3010 99-7336 92-8083 51-773 92-3056 92-3057 NSS 55-5130 78-1399 51-262 33-2212 92-3279 92-3185 33-3812 WALL - back CLAMP - slider PROFILE - fastening BRACKET - bottom STIFFENER

DESCRIPTION

RIVET - clamp, profile, bracket & stiffener STRIP COVER - front (4 ft lg, cut to 2.61 ft) RIVET (plastic) COVER - end COVER - end HEATER RIVET - heater BLOWER (24V) CLAMP GROMMET (0.188 id) EXTRUSION (rubber) STRIP (neoprene) STRIP (neoprene)

42

190C3
CONVECTOR KIT (720048) 190C3 8/31/05

CONVECTOR KIT (720048)

Revised 8/31/05

43

Revised 8/31/05

CONVECTOR KIT (720048)

190C3
QTY
2 2 1 1 1 2 4 1 1 1 1 5 10 1 2 4 1 2 A/R 4 A/R 2 A/R A/R 1 1 1 2 6 1 10 10 4 8 4 8 12 1 1

REF
1 2 3 4 5

PART#
33-282 33-2212 67-2148 67-1981 98-7317 55-3669 55-2012 GROMMET GROMMET COIL - heater COIL - heater COVER - back RIVET RIVET COVER - convector RIVET - plastic COVER - convector RIVET - plastic CLAMP - slider RIVET COVER - back RIVET RIVET CONVECTOR - coil TUBE SLOT - open RIVET SLOT - open RIVET STRIP - sealing STRIP COVER - end (front) COVER - middle COVER - middle BLOWER BRACKET COVER - end (back) SLIDER - top SLIDER - bottom BRACKET - bottom RIVET BRACKET - top RIVET CLAMP COVER - convector GROMMET

DESCRIPTION

6 7 8 9

NSS 51-773 NSS 51-773 51-294 55-1714 98-6767 55-3669 55-2012

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

NSS 61-2481 92-3410 51-257 92-3429 51-257 99-7336 91-9862 92-3057 92-3430 92-3431 78-1399 92-2651 92-3432 92-2647 92-2648 92-2649 55-1714 92-2650 55-1714 51-262 NSS 33-2440

44

190C4
CONVECTOR KIT (720049) 190C4 5/16/05

CONVECTOR KIT (720049)

Revised 5/16/05

45

Revised 5/16/05

CONVECTOR KIT (720049)

190C4
QTY
1 2 1 1 3 6 1 4 1 2 A/R 4 A/R A/R 1 1 A/R 2 3 3 3 6 3 6 8

REF
1 2 3 4 5 6 7 8

PART#
33-282 33-2212 41-4949 67-1980 51-294 51-1227 98-6765 55-5130 NSS 51-773 92-3410 51-257 99-7336 GROMMET GROMMET

DESCRIPTION

CONNECTOR (4 pin, male) COIL - heater CLAMP - slider RIVET - bracket BRACKET - front RIVET - bracket COVER - convector RIVET - plastic SLOT - open RIVET STRIP - sealing (0.12 x 1 x 50 ft) STRIP COVER - end (back) COVER - end (front) STRIP - sealing (0.12 x 2 x 50 ft) BLOWER SLIDER - top SLIDER - bottom BRACKET - bottom RIVET - bracket BRACKET - top RIVET - bracket CLAMP

10 11 12 13 14 15 16 17 18 19

91-9862 92-3056 92-3057 92-3185 78-1399 92-2647 92-2648 92-2649 51-1227 92-2650 51-1227 51-262

46

203F2
CONVECTOR KIT (720155) 203F2 5/16/05

CONVECTOR KIT (720155)

Revised 5/16/05

47

Revised 5/16/05

CONVECTOR KIT (720155)

203F2
QTY
1 3 1 1 1 2 4 1 1 1 1 5 10 1 2 4 1 4 4 1 1 1 1 2 5 10 8 2 2 2 2 A/R 8 5 10 8 12 1 1 1 2 1

REF
1 2 3 4 5

PART#
33-282 33-2212 67-2149 67-2151 98-7240 55-5130 51-1227 GROMMET GROMMET COIL - heater COIL - heater COVER - back RIVET - cover RIVET - cover COVER - convector RIVET - plastic COVER - convector RIVET - plastic CLAMP - slider RIVET - clamp COVER - back RIVET - cover RIVET - cover CONVECTOR - coil CLAMP - harness BANDWRAP COVER - end (front) COVER - middle COVER - middle COVER - end (back) BLOWER BRACKET - top RIVET - bracket SLIDER - top COVER SCREW - cover LOCKWASHER NUT - captive HOSE CLAMP - hose BRACKET - bottom RIVET - bracket SLIDER - bottom CLAMP MOUNT - cable tie BANDWRAP STIFFENER RIVET - stiffener EXTRUSION - rubber

DESCRIPTION

6 7 8 9

NSS 51-773 NSS 51-773 51-294 51-1227 98-7241 55-5130 51-1227

10 11 12 13 14 15 16 17 18 19

NSS 92-5031 51-1228 92-3057 92-3430 92-3431 92-3432 78-1399 92-2650 51-1227 92-2647 92-2642 55-9876 55-8310 51-296

20 21 22 23 24 25 26 27

92-5032 51-1229 92-2649 51-1227 92-2648 51-262 92-5033 55-2330 92-4105 51-1227 91-7754

48

203F2

CONVECTOR KIT (720155)

Revised 5/16/05

49

Revised 5/16/05

CONVECTOR KIT (720155)

203F2
QTY
2 1 3 1 2 1

REF
28 29 30 31 32 33

PART#
91-9862 NSS 92-2651 41-6810 41-2769 41-4949 INSULATION COVER - convector BRACKET HARNESS

DESCRIPTION

• CONNECTOR (4 pin, female) • CONNECTOR (4 pin, male)

50

203F3
CONVECTOR KIT (720157) 203F3 10/14/10

CONVECTOR KIT (720157)

Revised 10/14/10

51

Revised 10/14/10

CONVECTOR KIT (720157)

203F3
QTY
1 1 1 2 1 2 1 1 1 2 4 6 2 4 2 2 4 2

REF
1 2 3 4 5 6 7 8 9 10 11 12 13

PART#
33-2212 67-2150 98-7242 55-5130 NSS 51-773 92-3057 92-3056 78-1399 51-294 51-1227 51-362 92-2650 51-1227 92-2647 92-2649 51-1227 92-2648 GROMMET COIL - heater COVER - back RIVET - cover COVER - convector RIVET - plastic COVER - end (front) COVER - end (back) BLOWER CLAMP - slider RIVET - clamp CLAMP BRACKET - top RIVET - bracket SLIDER - top BRACKET - bottom RIVET - bracket SLIDER - bottom

DESCRIPTION

52

181E4
CONVECTOR FRONT LEFTSIDE (1E06001G01) 181E4 3/13/03

CONVECTOR - FRONT LEFTSIDE (1E06001G01)

Revised 3/13/03

53

Revised 3/13/03

CONVECTOR - FRONT LEFTSIDE (1E06001G01)

181E4
QTY
1 4 2 1 1 1 1 1 1 1 1 1 2 2 1 3 1 A/R 1 A/R 2 2 6 A/R 1

REF
1 2 3 4

PART#
33-2212 55-2818 51-294 92-2642 51-295 55-8310 51-296 GROMMET CLAMP CLAMP - slider BRACKET - tubes SCREW - bracket LOCKWASHER INSERT COVER - front end COVER - middle COVER - convector COVER - back BRACKET - front HOSE - silicone STRIP STRIP STRIP BLOWER (24V) SLIDER - top COVER - convector SLIDER - bottom BRACKET - bottom BRACKET - top CLAMP BRACKET COIL - heater

DESCRIPTION

5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 22

92-2643 92-2644 NSS 92-2645 92-2646 61-1893 33-3812 33-3813 33-3814 78-1328 92-2647 NSS 92-2648 92-2649 92-2650 51-262 92-2651 67-1894

54

181E5
CONVECTOR FRONT RIGHTSIDE (1E05996G01/G02/ G03/G04) 181E5 3/13/03

CONVECTOR - FRONT RIGHTSIDE (1E05996G01/G02/ G03/G04)

Revised 3/13/03

55

Revised 3/13/03

CONVECTOR - FRONT RIGHTSIDE (1E05996G01/G02/ G03/G04)

181E5
QTY
1 4 1 1 2 1 1 1 1 1 1 1 1 1 2 2 1 1 3 1 A/R 1 A/R 3 3 7 A/R 1 1

REF
1 2 3 4 5

PART#
33-2212 55-2818 41-2780 41-2781 51-294 92-2642 51-295 55-8310 51-296 GROMMET CLAMP

DESCRIPTION

HARNESS - temperature sensor

• SENSOR - RT
CLAMP - slider BRACKET - tubes SCREW - bracket LOCKWASHER INSERT COVER - front end COVER - back end COVER - convector COVER - front BRACKET - front HOSE - silicone STRIP COVER - middle STRIP STRIP BLOWER (24V) SLIDER - top CONVECTOR - coil SLIDER - bottom BRACKET - bottom BRACKET - top CLAMP BRACKET COIL - heater BRACKET - end

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

92-2652 92-2643 NSS 92-2653 92-2654 61-1893 33-3812 92-2954 33-3813 33-3814 78-1328 92-2647 NSS 92-2648 92-2649 92-2650 51-262 92-2651 67-1895 92-2655

56

181E6
CONVECTOR MIDDLE LEFTSIDE (1E06000G01/G02) 181E6 3/13/03

CONVECTOR - MIDDLE LEFTSIDE (1E06000G01/G02)

Revised 3/13/03

57

Revised 3/13/03

CONVECTOR - MIDDLE LEFTSIDE (1E06000G01/G02)

181E6
QTY
1 4 3 3 3 3 3 2 2 1 1 1 1 1 2 2 2 3 1 A/R 1 A/R 2 2 8 A/R 1

REF
1 2 3 4

PART#
33-2212 55-2818 51-294 92-2642 51-295 55-8310 51-296 GROMMET CLAMP CLAMP - slider BRACKET - tubes SCREW LOCKWASHER INSERT COVER - middle COVER - front end COVER - front COVER - convector COVER - back BRACKET - front BRACKET - middle HOSE - silicone STRIP STRIP STRIP BLOWER (24V) SLIDER - top CONVECTOR - coil SLIDER - bottom BRACKET - bottom BRACKET - top CLAMP BRACKET COIL - heater

DESCRIPTION

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

92-2644 92-2656 92-2653 NSS 92-2657 92-2658 92-2659 61-1893 33-3812 33-3813 33-3814 78-1328 92-2647 NSS 92-2648 92-2649 92-2650 51-262 92-2651 67-1896

58

181E7
CONVECTOR MIDDLE RIGHTSIDE (1E05997G01/G02) 181E7 3/13/03

CONVECTOR - MIDDLE RIGHTSIDE (1E05997G01/ G02)

Revised 3/13/03

59

Revised 3/13/03

CONVECTOR - MIDDLE RIGHTSIDE (1E05997G01/ G02)

181E7
QTY
1 1 1 1 1 1 1 1 1 1 1 1 A/R 1 A/R 1 1 3 A/R 1

REF
1 2

PART#
51-294 92-2642 51-295 55-8310 51-296 CLAMP - slider BRACKET - tubes SCREW - bracket LOCKWASHER INSERT COVER - front end COVER - middle COVER - back end COVER - convector COVER - front BRACKET - middle STRIP SLIDER - top CONVECTOR - coil SLIDER - bottom BRACKET - bottom BRACKET - top CLAMP BRACKET BRACKET - front

DESCRIPTION

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

92-2652 92-2644 92-2656 NSS 92-2660 92-2661 33-3813 92-2647 NSS 92-2648 92-2649 92-2650 51-262 92-2651 92-2662

60

181E8
CONVECTOR BACK LEFTSIDE (1E05999G01) 181E8 3/13/03

CONVECTOR - BACK LEFTSIDE (1E05999G01)

Revised 3/13/03

61

Revised 3/13/03

CONVECTOR - BACK LEFTSIDE (1E05999G01)

181E8
QTY
1 4 2 2 2 2 2 1 1 1 1 2 1 2 2 3 1 A/R 1 A/R 2 2 6 A/R 1

REF
1 2 3 4

PART#
33-2212 55-2818 51-294 92-2642 51-295 55-8310 51-296 GROMMET CLAMP CLAMP - slider BRACKET - tubes SCREW - bracket LOCKWASHER INSERT COVER (middle) COVER - convector COVER - back BRACKET - back HOSE - silicone COVER - end (back) STRIP STRIP STRIP BLOWER (24V) SLIDER - top CONVECTOR - coil SLIDER - bottom BRACKET - bottom BRACKET - top CLAMP BRACKET COIL - heater

DESCRIPTION

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

92-2656 NSS 92-2663 92-2664 61-1893 92-2955 33-3812 33-3813 33-3814 78-1328 92-2647 NSS 92-2648 92-2649 92-2650 51-262 92-2651 67-1896

62

181E9
CONVECTOR BACK RIGHTSIDE (1E05998G01) 181E9 3/13/03

CONVECTOR - BACK RIGHTSIDE (1E05998G01)

Revised 3/13/03

63

Revised 3/13/03

CONVECTOR - BACK RIGHTSIDE (1E05998G01)

181E9
QTY
1 4 2 2 2 2 2 1 1 1 1 2 1 2 2 3 1 A/R 1 A/R 2 2 6 A/R 1

REF
1 2 3 4

PART#
33-2212 55-2818 51-294 92-2642 51-295 55-8310 51-296 GROMMET CLAMP CLAMP - slider BRACKET - tubes SCREW - bracket LOCKWASHER INSERT COVER (middle) COVER - convector COVER - back BRACKET - back HOSE - silicone COVER - end (back) STRIP STRIP STRIP BLOWER (24V) SLIDER - top CONVECTOR - coil SLIDER - bottom BRACKET - bottom BRACKET - top CLAMP BRACKET COIL - heater

DESCRIPTION

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

92-2644 NSS 92-2663 92-2665 61-1893 92-2956 33-3812 33-3813 33-3814 78-1328 92-2647 NSS 92-2648 92-2649 92-2650 51-262 92-2651 67-1896

64

251C7
CONVECTOR (1E55603G01 & 1E56356G01) 251C7 4/20/11

CONVECTOR (1E55603G01 & 1E56356G01)

Revised 4/20/11

65

Revised 4/20/11

CONVECTOR (1E55603G01 & 1E56356G01)

251C7
QTY
1 1 1 A/R 6 6 2 1 1 A/R 1 1 2 40

REF
1 2 3 4 5 6 7 8 9 10 11 12 13

PART#
NSS 92-8960 92-8961 92-7767 92-2647 92-2651 51-262 NSS 61-1382 92-8084 92-3057 92-3431 51-2108 55-2988

DESCRIPTION
CONVECTOR - TKV 800

• BRACKET - wall • BRACKET - wall (end) • BRACKET - fasting profile (4ft lg piece) • SLIDER • BRACKET • CLAMP • COIL - heater • VALVE - deaerate • COVER (8 ft lg) • CAP - end piece (roadside front) • UNION (roadside, center) • RIVET - plastic • RIVET - steel

66

251C8
CONVECTOR (1E55607G02 & 1E56357G01) 251C8 4/20/11

CONVECTOR (1E55607G02 & 1E56357G01)

Revised 4/20/11

67

Revised 4/20/11

CONVECTOR (1E55607G02 & 1E56357G01)

251C8
QTY
1 A/R 1 1 1 1 2 2 2 2 2 A/R 1 1 16

REF
1 2 3 4 5 6 7 8 9 10 11 12 13 14

PART#
NSS 92-8083 92-3056 92-3430 NSS 61-1382 51-2108 92-2649 92-2650 92-2647 51-262 92-7767 92-8960 92-8961 55-1714

DESCRIPTION
CONVECTOR - TKV 800

• COVER (4ft lg) • CAP - end piece (left) • UNION (right) • COIL - heater • VALVE - dearate • RIVET - plastic • BRACKET - bottom • BRACKET - top • SLIDER • CLAMP • BRACKET - fasting profile (4ft lg) • BRACKET - wall • BRACKET - wall end • RIVET

68

251C9
CONVECTOR (1E56269G01) 251C9 5/18/11

CONVECTOR (1E56269G01)

Revised 5/18/11

69

Revised 5/18/11

CONVECTOR (1E56269G01)

251C9
QTY
1 A/R 1 1 A/R 1 3 A/R 1 2 1 2 2 1 1 1 1 A/R 4 3 6 6 2 11 1 2 A/R A/R

REF
1 2 3 4 5 6 7 8

PART#
NSS 92-8084 92-3056 92-3431 92-8084 92-3430 51-2108 92-3185 41-9163 44-6959 44-9569

DESCRIPTION
CONVECTOR - FAC/TKV (curbside front)

9

78-1781 44-9569

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

NSS NSS 92-8962 92-8960 55-1714 51-294 92-2649 92-2650 92-2647 92-2651 51-262 92-3785 92-8963 92-3279 99-7336

• COVER (8 ft lg) • CAP - end • UNION - middle • COVER (8 ft lg) • UNION - end • RIVET - plastic • STRIP - neoprene • HARNESS - blower (for connectors see 115D14) •• CONNECTOR - tower (3 pin) •• CONNECTOR - shroud (3 pin) • BLOWER •• CONNECTOR - shroud (3 pin see 115D14 for connectors) • COIL - heater • COIL - heater • BRACKET - back wall • BRACKET - back wall • RIVET • CLAMP - slider • BRACKET - bottom • BRACKET - top • SLIDER • BRACKET • CLAMP • MOUNT - cable tie • STIFFENER • EXTRUSION (rubber) • STRIP

70

251C0
CONVECTOR (1E56353G01 & 1E56353G02) 251C0 5/19/11

CONVECTOR (1E56353G01 & 1E56353G02)

Revised 5/19/11

71

Revised 5/19/11

CONVECTOR (1E56353G01 & 1E56353G02)

251C0
QTY
1 A/R 1 1 3 1 1 7 A/R A/R 4 8 4 4 8 1 1 1 1 1 1 1 2 1 1 A/R A/R A/R 1 2 A/R

REF
1 2 3 4 5 6 7 8 9 10

PART#
NSS 92-8083 NSS 92-3430 51-2108 92-3431 92-8960 51-262 55-1714 92-8083 92-2650 55-1714

DESCRIPTION
CONVECTOR - FAC\TKV 800

11 12

92-2647 92-2649 55-1714

13 14

92-3056 92-3785 55-2330

15

78-1781 44-9569

16 17 18 19 20 21 22 23 24

NSS 92-8964 55-5130 92-7767 33-282 99-7336 92-3185 92-3279 92-4105 55-1714

25

92-8965

• COVER (4 ft lg) • COIL - heater • UNION (right) • RIVET - plastic • UNION (left) • BRACKET - wall end • CLAMP • RIVET - steel • COVER (4 ft lg) • BRACKET - top • RIVET - bracket • SLIDER • BRACKET - bottom • RIVET - bracket • CAP - end piece (left) • MOUNT - bandwrap • BANDWRAP • BLOWER •• CONNECTOR - shroud (3 pin, see 115D14 for connectors) • HEATER - coil • BRACKET - wall • RIVET - steel • BRACKET - fasting profile (4 ft) • GROMMET (3/8 id) • STRIP - neoprene • STRIP - neoprene • EXTRUSION (rubber) • STIFFENER • RIVET - stiffener • SCREEN (47 inches long)

72

251D1
CONVECTOR (1E55970G01 & 1E55970G02) 251D1 5/25/11

CONVECTOR (1E55970G01 & 1E55970G02)

Revised 5/25/11

73

Revised 5/25/11

CONVECTOR (1E55970G01 & 1E55970G02)

251D1
QTY
1 A/R 1 1 1 3 1 1 6 A/R 2 4 4 4 1 1 2 A/R A/R 1 A/R

REF
1 2 3

PART#
NSS 92-8083 NSS 78-1781 44-9569

DESCRIPTION

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

51-2108 92-3431 92-8965 51-262 33-3812 51-294 92-2650 92-2647 92-2649 92-3056 92-8969 55-2988 92-3185 99-7336 92-4105 92-3279

• CONVECTOR - FAC\TKV 800 • COVER (4 ft lg) • COIL - heater • BLOWER •• CONNECTOR - shroud (3 pin, see 115D14 for connectors) • RIVET - plastic • UNION (left) • SCREEN (47 inches long) • CLAMP • STRIP (neoprene) • CLAMP - slider • BRACKET - top • SLIDER • BRACKET - bottom • CAP - end piece (left) • BRACKET - wall • RIVET - steel • STRIP - neoprene • STRIP - neoprene • STIFFENER • EXTRUSION (rubber)

74

251D2
CONVECTOR (1E60709G01) 251D2 9/9/11

CONVECTOR (1E60709G01)

Revised 9/9/11

75

Revised 9/9/11

CONVECTOR (1E60709G01)

251D2
QTY
1 A/R 1 1 A/R 1 3 A/R 1 3 1 3 3 1 1 1 1 A/R 6 2 4 4 1 14 1 3 A/R A/R 1

REF
1 2 3 4 5 6 7 8

PART#
NSS 92-8084 92-3056 92-3431 92-8084 92-3430 51-2108 99-7336 41-9835 44-6959 44-9569

DESCRIPTION
CONVECTOR - FAC/TKV 800

9

78-1781 44-9569

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

NSS NSS 92-8968 92-8960 55-1714 51-294 92-2649 92-2650 92-2647 92-8967 51-262 92-3785 92-8963 92-3279 33-3812 33-282

• COVER (8 ft lg) • CAP - end • UNION - middle • COVER (8ft lg) • UNION - end • RIVET - plastic • STRIP - neoprene • HARNESS - blower (for connectors see 115D14) •• CONNECTOR - tower (3 pin) •• CONNECTOR - shroud (3 pin) • BLOWER •• CONNECTOR - shroud (3 pin see 115D14 for connectors) • COIL - heater • COIL - heater • BRACKET - back wall • BRACKET - back wall end • RIVET • CLAMP - slider • BRACKET - bottom • BRACKET - top • SLIDER • SCREEN (87 inches long) • CLAMP • MOUNT - cable tie • STIFFENER • EXTRUSION (rubber) • STRIP • GROMMET (3/8 id)

76

251D3
CONVECTOR (1E60710G01) 251D3 9/9/11

CONVECTOR (1E60710G01)

Revised 9/9/11

77

Revised 9/9/11

CONVECTOR (1E60710G01)

251D3
QTY
1 A/R 1 2 A/R 1 3 A/R 1 3 1 3 3 1 1 1 1 A/R 4 5 4 6 1 14 1 3 A/R A/R

REF
1 2 3 4 5 6 7 8

PART#
NSS 92-8084 92-3057 92-3431 92-8084 33-282 51-2108 99-7336 41-9835 44-6959 44-9569

DESCRIPTION
CONVECTOR - FAC/TKV (curbside front)

9

78-1781 44-9569

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

NSS NSS 92-8966 92-8961 55-1714 51-294 92-2649 92-2650 92-2647 92-8967 51-262 92-3785 92-8963 92-3279 33-3812

• COVER (8 ft lg) • CAP - end • UNION - middle • COVER (8ft lg) • GROMMET (3/8 id) • RIVET - plastic • STRIP - neoprene • HARNESS - blower (for connectors see 115D14) •• CONNECTOR - tower (3 pin) •• CONNECTOR - shroud (3 pin) • BLOWER •• CONNECTOR - shroud (3 pin see 115D14 for connectors) • COIL - heater • COIL - heater • BRACKET - back wall • BRACKET - back wall end • RIVET • CLAMP - slider • BRACKET - bottom • BRACKET - top • SLIDER • SCREEN (87 inches long) • CLAMP • MOUNT - cable tie • STIFFENER • EXTRUSION (rubber) • STRIP

78

232F2
COMPRESSOR GROUP - TM31 (2C35549G04, KIT 718377) 232F2 1/26/09

COMPRESSOR GROUP - TM31 (2C35549G04, KIT 718377)

Revised 1/26/09

79

Revised 1/26/09

COMPRESSOR GROUP - TM31 (2C35549G04, KIT 718377)

232F2
QTY
1 1 1 1 4 2 A/R 1

REF
1 2 3 4

PART#
102-633 107-337 22-1261 22-1262 55-5406

DESCRIPTION
COMPRESSOR - TM31 (24V 2B)

5 6

33-4305 203-515 91-7543

• CLUTCH (2B, 24V) • FITTING - discharge • FITTING - suction • SCREW - fittings • O-RING
OIL - compressor NAMEPLATE - 24VDC

80

98C13
COMPRESSOR GROUP 98C13 10/1/98

COMPRESSOR GROUP

Revised 10/1/98

81

Revised 10/1/98

COMPRESSOR GROUP

98C13
QTY
1 1 1 1

REF
1 2 3 4

PART#
102-669 107-226 306-301 306-293 PULLEY - clutch HOSE - suction HOSE - discharge

DESCRIPTION
COMPRESSOR - TM31

82

184G8
COMPRESSOR GROUP - TM31 184G8 4/8/11

COMPRESSOR GROUP - TM31

Revised 4/8/11

83

Revised 4/8/11

COMPRESSOR GROUP - TM31

184G8
QTY
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 A/R 1 1

REF
1

PART#
102-999 102-994 102-633 107-337 102-669 107-356 102-809 107-332 102-808 107-357 102-736 107-338 102-742 107-345 22-1261 22-1262 55-5406 33-4305 203-515

DESCRIPTION
COMPRESSOR - TM31 HD (less clutch) COMPRESSOR - TM31 HD (less clutch & fittings) COMPRESSOR - TM31 (24V 2B, for connectors see115D14)

• CLUTCH (2B, 24V)
COMPRESSOR - TM31 (12V 2B, for connectors see115D14)

• CLUTCH (2B, 12V)
COMPRESSOR - TM31 (24V 2A, for connectors see 115D14)

• CLUTCH (2A, 24V)
COMPRESSOR - TM31 (12V 2A, for connectors see 115D14)

• CLUTCH (2A, 12V)
COMPRESSOR - TM31 (24V 8V, for connectors see 115D14)

• CLUTCH (8V, 24V)
COMPRESSOR - TM31 (12V 8V, for connectors see 115D14)

• CLUTCH (8V, 12V) • FITTING - discharge • FITTING - suction • SCREW - fittings • O-RING
OIL - compressor NAMEPLATE - 24VDC NAMEPLATE - 12VDC

2

91-7543 91-7520

NOTE:

For kits 702518, 702519, 702520, 702521, 702522, 702523, 702524, 702525, 718376, 718377, 719717, 719718, 719221 & 719222.

84

164A3
TM31 COMPRESSOR & HOSE KITS 164A3 6/20/06

TM31 COMPRESSOR & HOSE KITS

Revised 6/20/06

85

Revised 6/20/06

TM31 COMPRESSOR & HOSE KITS

164A3
QTY
1 1 1 1 1 1 1 1 1 1 1 1 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

REF
1

PART#
102-669 102-633 107-337 102-742 107-345 102-736 107-338 102-808 102-809 107-332 22-1261 22-1262 55-5406 33-4305 203-502 203-504

DESCRIPTION
COMPRESSOR - TM31 (2BG, 12VDC) COMPRESSOR - TM31 (2BG, 24VDC)

• CLUTCH (2B, 24V)
COMPRESSOR - TM31 (8KG 12V)

• CLUTCH (2B, 12V)
COMPRESSOR - TM31 (8KG 24V)

• CLUTCH (8V, 24V)
COMPRESSOR - TM31 (2AG, 12V) COMPRESSOR - TM31 (2AG, 24V)

• CLUTCH (2A, 24V) • FITTING - discharge • FITTING - suction • SCREW - fittings • O-RING
OIL - compressor (PAG, 8 oz) OIL - compressor HOSE - suction (9 m) HOSE - suction (12 m) HOSE - suction (17 m) FITTING - suction (tube-O 90, 1-1/16-14) FITTING - suction (tube-O 45, 1-1/16-14) FITTING - suction (straight, 1-1/16-14) HOSE - discharge (9 m) HOSE - discharge (12 m) HOSE - discharge (17 m) FITTING - discharge (tube-O, 90) FITTING - discharge (tube-O, 45) FITTING - discharge (tube-O, straight) O-RING (11/16 id) O-RING (9/16 id)

2

61-1084 61-1085 61-1086 55-9793 55-9802 55-9790

3

61-1087 61-1088 61-1089 55-9798 55-9803 55-9801

4 5

33-2847 33-2848

86

184E4
COMPRESSOR GROUP - TM21 184E4 12/6/10

COMPRESSOR GROUP - TM21

Revised 12/6/10

87

Revised 12/6/10

COMPRESSOR GROUP - TM21

184E4
QTY
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1

REF
1

PART#
102-1000 102-768 107-315 102-785 107-316 102-812 107-333 102-813 107-334 102-896 107-367 102-815 107-336 203-532 44-7327 44-5884

DESCRIPTION
COMPRESSOR TM21 HD (less clutch) COMPRESSOR TM-21 HD (12V, 1B groove)

• CLUTCH (12V, 1B groove)
COMPRESSOR TM-21 HD (24V, 1B groove)

• CLUTCH (24V, 1B groove)
COMPRESSOR - TM-21 HD (12V, 2A groove)

• CLUTCH (12V, 2A groove)
COMPRESSOR - TM-21 HD (24V, 2A groove)

• CLUTCH (24V, 2A groove)
COMPRESSOR - TM-21 HD (12V, 8V groove)

• CLUTCH (12V, 8V groove)
COMPRESSOR - TM-21 HD (24V, 8V groove)

• CLUTCH (24V, 8V groove)
OIL - compressor (POE, 6.1 oz) CONNECTOR - tower (1 pin) TERMINAL - female (18-20 ga) NAMEPLATE - 12 V NAMEPLATE - 24 V KIT - manifold (90 degree swivel)

2 3

91-7520 91-7543 22-1335 51-1652 33-672

• SCREW - manifold • O-RING
FILTER - suction

4

22-1263

88

179A7
COMPRESSOR GROUP (TM16-XD & HD DM) 179A7 9/9/11

COMPRESSOR GROUP (TM16-XD & HD DM)

Revised 9/9/11

89

Revised 9/9/11

COMPRESSOR GROUP (TM16-XD & HD DM)

179A7
QTY
1 1 1 1 1 1 1 1 1 1 1 1 1 1 A/R 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 4 1 1 1 1 1 2

REF
1

PART#
102-570 102-571 102-667 102-668 102-807 102-586 102-587 102-842 102-875 22-1263

DESCRIPTION
COMPRESSOR TM16-XD (12V, 2A groove clutch) COMPRESSOR TM16-XD (24V, 2A groove clutch) COMPRESSOR TM16-XD (12V, poly groove 6V clutch) COMPRESSOR TM16-XD (24V, poly groove 8V clutch) COMPRESSOR TM16-XD (12V, poly groove 8V clutch) COMPRESSOR TM16-XD (12V, variable groove) COMPRESSOR TM16-XD (24V, variable groove) COMPRESSOR TM16-XD (12V, 2A groove, Packard connector) COMPRESSOR TM16-XD (less clutch)

• FILTER - suction
COMPRESSOR - TM16-HD DM (12V, poly groove 8K clutch) COMPRESSOR - TM16-HD DM (24V, poly groove 8K clutch) COMPRESSOR - TM16-HD DM (12V, poly groove 6V clutch) COMPRESSOR - TM16-HD DM (24V, 2A groove clutch)

2

102-899 102-903 102-904 102-905 203-515

3

107-241 107-242

4

107-301 107-262 107-311 107-312 107-313

5

41-593 41-594

• OIL - compressor • CLUTCH (12V, 2A groove) • CLUTCH (24V, 2A groove) • CLUTCH (12V, poly groove 6V) • CLUTCH (24V, poly groove 8V) • CLUTCH (12V, poly groove 8V) • CLUTCH (12V, variable groove) • CLUTCH (24V, variable groove) •• COIL (12V) •• COIL (24V)
KIT - manifold (elbow, w/o-ring fittings) KIT - manifold (straight, w/o-ring fittings) VALVE - assembly

6 7 8

20-150 20-151 11-2886 11-7777 55-5672

9 10

22-1121 55-8648 55-8537

• VALVE • VALVE - cap • BRACKET - manifold • SCREW • LOCKWASHER
PLUG CONNECTOR - tower (1 pin) TERMINAL - female (18-20 ga) SEAL - cable (red, 18-20 ga) KIT - manifold

11 12 13 14 15 16

55-3364 44-7327 44-5884 44-8681 20-193 51-1652 33-2882

• SCREW - manifold
O-RING

90

133F14
COMPRESSOR GROUP (TM16-XD & HD DM) 133F14 12/3/10

COMPRESSOR GROUP (TM16-XD & HD DM)

Revised 12/3/10

91

Revised 12/3/10

COMPRESSOR GROUP (TM16-XD & HD DM)

133F14
QTY
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1

REF
1

PART#
102-875 102-570 102-842 102-571 102-843 102-667 102-668 102-807

DESCRIPTION
COMPRESSOR - TM16-XD (less clutch) COMPRESSOR - TM16-XD (12 V, 5.3 in, incl 2A groove clutch) COMPRESSOR - TM16-XD (12 V, incl 2A groove clutch, Packard connector) COMPRESSOR - TM16-XD (24 V, incl 2A groove clutch) COMPRESSOR - TM16-XD (24 V, incl 2A groove clutch, Packard connector) COMPRESSOR - TM16-XD (12 V, incl poly groove 6V clutch) COMPRESSOR - TM16-XD (24 V, incl poly groove 8V clutch) COMPRESSOR TM16-XD (12 V, poly groove 8V clutch) COMPRESSOR - TM16-HD DM (12 V, incl poly groove 8V clutch) COMPRESSOR - TM16-HD DM (24 V, incl poly groove 8V clutch) COMPRESSOR - TM16-HD DM (12 V, 5.3 in, incl 2A groove clutch) COMPRESSOR - TM16-HD DM (24 V, 5.3 in, incl 2A groove clutch) OIL - compressor (solest 120, 1 liter) FILTER - compressor

2

102-899 102-903 102-904 102-905 203-515 22-1263

3

107-241 107-242

4

107-261 107-311 107-262

• CLUTCH (12 V, 2A groove) • CLUTCH (24 V, 2A groove) • CLUTCH (12 V, poly groove 6V)
CLUTCH (12 V, poly groove 8V)

5

41-593 41-594

6 7

44-7327 44-5884 44-5885

• CLUTCH (24 V, poly groove 8V) •• COIL (12 V) •• COIL (24 V) • CONNECTOR - tower (1 pin) • TERMINAL - female (18-20 ga) • SEAL - cable (green, 18-22 ga)
FITTING - oil return (w/ 8 mm threads) FITTING - oil return (w/ 10 mm threads) FITTING - oil return (w/ 8 mm threads, #4, o-ring seal) GASKET (1/4 flare) CAP - flare VALVE - high pressure relief O-RING - manifold CONNECTOR - compressor MANIFOLD - compressor (90 deg, w/o-ring fittings) MANIFOLD - compressor (90 deg, w/flare fittings) KIT - manifold (straight, inc items 18 - 22) KIT - manifold (90 deg, inc items 18 - 22)

8

66-7041 55-8743 55-8778

9 10 11 12 13 14 15 16 17

33-768 55-1983 22-1009 33-2882 22-1053 22-992 22-993 20-151 20-150

92

133F14

COMPRESSOR GROUP (TM16-XD & HD DM)

Revised 12/3/10

93

Revised 12/3/10

COMPRESSOR GROUP (TM16-XD & HD DM)

133F14
QTY
4 2 1 1 1 1 1

REF
18 19 20

PART#
55-3364 11-2886 55-8648 55-7000

DESCRIPTION

21 22 23 NOTE:

NSS 20-193 51-1652

• PLUG • VALVE (Schrader) • SCREW - manifold • LOCKWASHER • CLAMP - manifold
KIT - manifold

• SCREW - manifold

Refer to compressor nameplate for replacement.

94

190A0
COMPRESSOR GROUP (KIT 720190 & 720191) 190A0 11/2/07

COMPRESSOR GROUP (KIT 720190 & 720191)

Revised 11/2/07

95

Revised 11/2/07

COMPRESSOR GROUP (KIT 720190 & 720191)

190A0
QTY
2 2 2 A/R 2 2 2 2 2 4 4 4 4 2 2 8 2

REF
1

PART#
102-668 102-815 22-1263 203-515

DESCRIPTION
COMPRESSOR TM16 (24 V, poly groove 8V clutch, Kit 720190) COMPRESSOR TM21 (24 V, 8K groove, Kit 720191)

• FILTER - suction
OIL - compressor

2

107-262 107-336

3 4 5 6

41-594 22-1121 20-150 11-2886 55-7213 11-7777 55-5672

• CLUTCH (24 V, poly groove 8V, Kit 720190) • CLUTCH (24 V, 8K groove, Kit 720191) •• COIL (24 V, for connectors see 115D14)
BRACKET - manifold KIT - manifold (straight, w/ o-ring fittings) VALVE - assembly

• VALVE - body • CORE - valve • VALVE - cap
LOCKWASHER SCREW PLUG NAMEPLATE - 24 VDC

7 8 9 10

55-8537 55-8648 55-3364 91-7543

96

229F6
COMPRESSOR GROUP (TM16-XD) 229F6 8/25/10

COMPRESSOR GROUP (TM16-XD)

Revised 8/25/10

97

Revised 8/25/10

COMPRESSOR GROUP (TM16-XD)

229F6
QTY
1 1 1 1 1 A/R 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 4 1 1 1 1

REF
1

PART#
102-570 102-571 102-807 102-668 22-1263 203-427

DESCRIPTION
COMPRESSOR TM16-XD (12V, 2A groove clutch) COMPRESSOR TM16-XD (24V, 2A groove clutch) COMPRESSOR TM16-XD (12V, poly groove 8V clutch) COMPRESSOR TM16-XD (24V, poly groove 8V clutch)

• FILTER - suction
OIL - SOLEST 120

2

107-241 107-324 107-311 107-262

3

41-593 41-594

• CLUTCH (12V, 2A groove) • CLUTCH (24V, 2A groove) • CLUTCH (12V, poly groove 8A) • CLUTCH (24V, poly groove 8A) •• COIL (12V) •• COIL (24V)
BRACKET-MANIFOLD COMPR CSTG KIT - manifold (vertical) KIT - manifold (straight, w/o-ring fittings) VALVE - assembly

4 5 6 7

22-1121 20-150 20-151 11-2886 55-7213 11-7777 55-5672

• VALVE - body • VALVE • VALVE - cap
SCREW LOCKWASHER PLUG CONNECTOR - tower (1 pin) TERMINAL - female (18-20 ga) SEAL - cable (red, 18-20 ga) CONNECTOR - compressor

8 9 10 11 12 13 14

55-8648 55-8537 55-3364 44-7327 44-5884 44-8681 22-1053

98

202G0
COMPRESSOR GROUP (TM16) 202G0 9/9/11

COMPRESSOR GROUP (TM16)

Revised 9/9/11

99

Revised 9/9/11

COMPRESSOR GROUP (TM16)

202G0
QTY
1 A/R 1 1 1 2 2 2 1 1 4 1 1 1

REF
1 2 3 4 5 6 7 8 9 10 11 12

PART#
102-571 203-515 107-242 41-594 22-1121 20-150 11-2886 55-5672 55-8537 55-8648 55-3364 44-7327 44-5884 44-8661

DESCRIPTION
COMPRESSOR - TM16-XD (2A groove) OIL - compressor (solest 120) CLUTCH (24V, 2A groove) COIL (24V) BRACKET - manifold KIT - manifold (vertical) VALVE - assembly

• CAP - valve
LOCKWASHER SCREW - bracket PLUG CONNECTOR - tower (1 pin) TERMINAL - female (18-20 ga) SEAL - connector

100

190D6
COMPRESSOR GROUP (TM16) 190D6 8/24/10

COMPRESSOR GROUP (TM16)

Revised 8/24/10

101

Revised 8/24/10

COMPRESSOR GROUP (TM16)

190D6
QTY
1 A/R 1 1 1 2 2 2 2 2 1 1 2 1 1 1 1 1

REF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

PART#
102-571 203-515 107-242 41-594 22-1121 20-150 11-2886 55-5672 55-7213 11-7777 55-8537 55-8648 55-3364 44-7327 44-5884 44-8661 41-6064 41-1501

DESCRIPTION
COMPRESSOR - TM16-XD (2A groove, 718371) OIL - compressor (solest 120) CLUTCH (24V, 2A groove, 718371) COIL (24V) BRACKET - manifold KIT - manifold (vertical) VALVE - assembly

• CAP - valve
VALVE - body CORE - valve LOCKWASHER SCREW - bracket PLUG CONNECTOR - tower (1 pin) TERMINAL - female (18-20 ga) SEAL - connector SWITCH - lpco (for connectors see 115D14) SWITCH - hpco (for connectors see 115D14)

102

181D4
COMPRESSOR GROUP (TM16, KIT 718371, 718373) 181D4 9/3/10

COMPRESSOR GROUP (TM16, KIT 718371, 718373)

Revised 9/3/10

103

Revised 9/3/10

COMPRESSOR GROUP (TM16, KIT 718371, 718373)

181D4
QTY
1 1 A/R 1 1 1 1 2 2 2 2 2 2 1 1 2 1 1 1 1 1 1 1

REF
1

PART#
102-571 102-668 203-427

DESCRIPTION
COMPRESSOR - TM16-XD (2A groove, 718371) COMPRESSOR - TM16 (8V, 718373) OIL - compressor (solest 120)

2 3 4 5 6 7 8 9

107-324 107-262 41-594 22-1121 20-150 20-151 11-2886 55-7213 11-7777 55-5672

• CLUTCH (24V, 2A groove, 718371) • CLUTCH (24V, poly groove 8V, 718373) •• COIL (24V)
BRACKET - manifold KIT - manifold (vertical) KIT - manifold (straight) VALVE - assembly

• BODY - valve • CORE - valve • CAP - valve
LOCKWASHER SCREW - bracket PLUG CONNECTOR (1 pin, female) TERMINAL - female (18-20 ga) SEAL - connector SWITCH - lpco (for connector see 115D14)

10 11 12 13 14 15 16 17

55-8537 55-8648 55-3364 44-7327 44-5884 44-8661 41-4147 41-4530 41-4146 41-4531

• SWITCH - only
SWITCH - hpco (for connector see 115D14)

• SWITCH - only

104

164A2
TM-16 COMPRESSOR & HOSE KITS 164A2 7/10/09

TM-16 COMPRESSOR & HOSE KITS

Revised 7/10/09

105

Revised 7/10/09

TM-16 COMPRESSOR & HOSE KITS

164A2
QTY
2 4 1 1 1 1 1 1 1 1 2 1 2 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

REF
1

PART#
102-570 102-571 107-241 107-242 102-667 102-668 107-261 107-262 203-502 203-504

DESCRIPTION
COMPRESSOR - TM16-XD (12V, 2A groove, 5.3 in) COMPRESSOR - TM16-XD (24V, 2A groove) CLUTCH (12V, 2A groove) CLUTCH (24V, 2A groove) COMPRESSOR - TM16-XD (12V, 6 poly groove) COMPRESSOR - TM16-XD (24V, 8 poly groove) CLUTCH (12V, poly groove) CLUTCH (24V, poly groove) OIL - compressor (PAG, 8 oz) OIL - compressor (ester solest 68, 8 oz) O-RING MANIFOLD - compressor MANIFOLD - discharge MANIFOLD - suction PLUG - pipe BRACKET - manifold SCREW - bracket LOCKWASHER O-RING (7/16 id) O-RING (9/16 id) O-RING (11/16 id) HOSE - suction (9 m) HOSE - suction (1 2m) HOSE - suction (17 m) FITTING - suction (tube-O, 90) FITTING - suction (tube-O, 45) FITTING - suction (tube-O, straight) FITTING - suction (straight) HOSE - discharge (9 m) HOSE - discharge (12 m) HOSE - discharge (17 m) FITTING - discharge (tube-O, 90) FITTING - discharge (tube-O, 45) FITTING - discharge (tube-O, straight) FITTING - discharge (straight) CONNECTOR - compressor VALVE CORE - valve CAP - valve COMPRESSOR - TM16-HD DM (12 V, incl poly groove 8K clutch) COMPRESSOR - TM16-HD DM (24 V, incl poly groove 8K clutch)

2 3 4 5 6 7 8 9

33-2882 22-992 22-1123 22-1122 55-3364 22-1121 55-8648 55-8537 33-2846 33-2848 33-2847

10

61-1084 61-1085 61-1086

11

55-9799 55-9804 55-9806 55-9790

12

61-1087 61-1088 61-1089

13

55-9800 55-9805 55-9783 55-9801

14 15

22-1053 11-2886 11-7777 55-5672

16

102-899 102-903

106

164A2

TM-16 COMPRESSOR & HOSE KITS

Revised 7/10/09

107

Revised 7/10/09

TM-16 COMPRESSOR & HOSE KITS

164A2
QTY
1 1

REF

PART#
102-904 102-905

DESCRIPTION
COMPRESSOR - TM16-HD DM (12 V, 5.3 in, incl 2A groove clutch) COMPRESSOR - TM16-HD DM (24 V, 5.3 in, incl 2A groove clutch)

108

242E0
TEMPERATURE CONTROL KIT 242E0 9/9/11

TEMPERATURE CONTROL KIT

Revised 9/9/11

109

Revised 9/9/11

TEMPERATURE CONTROL KIT

242E0
QTY
1 1 1 2 1 1 5 7 7

REF
1 2 3 4 5 6

PART#
92-8256 41-3229 41-9321 41-3227 41-9322 41-6160 651-148 PLATE - switch SWITCH - 3 speed

DESCRIPTION

SWITCH - thermostatic KNOB HARNESS

7

44-6381 44-5066

• CONNECTOR (14 pin) • TERMINAL - pin (18-24 ga) • CONNECTOR - female • TERMINAL - fingrip (14-18 ga)

110

242F1
COMPRESSOR GROUP (2C45049G24, KIT 702159) 242F1 2/16/10

COMPRESSOR GROUP (2C45049G24, KIT 702159)

Revised 2/16/10

111

Revised 2/16/10

COMPRESSOR GROUP (2C45049G24, KIT 702159)

242F1
QTY
1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1

REF
1 2

PART#
102-503 41-4209 41-5183 33-768

DESCRIPTION
COMPRESSOR - X640 (see 177H6) SWITCH - lpco (for connectors see 115D14)

• SWITCH - only
GASKET - switch SWITCH - hpco (for connectors see 115D14)

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

41-4486 41-4809 33-2805 33-920 55-7213 55-129 55-896 61-5070 33-230 33-2120 55-308 33-1777 92-3253 55-6804 55-3674 61-5072 66-9466 61-2236 55-1983 55-3364 NSS 107-150 77-1083 45-1965 77-1672 92-2700 41-9323 44-8294 41-1789 41-1790

• SWITCH - only
GASKET - discharge valve O-RING - suction FITTING - suction valve SCREW - valve FLATWASHER (3/8) VALVE - suction (see 242F2) O-RING - suction valve (1.875 id) SEAL - oil ELBOW O-RING - discharge BRACKET - wire support WASHER - sealing SCREW - discharge valve VALVE - discharge (see 242F3) HOSE - discharge (#20, SS) HOSE - suction (#24, SS) CAP - valve PLUG - pipe CLUTCH - assembly

• KIT - clutch drive repair (see 153E8)
PLATE FIELD - clutch (24VDC) PULLEY (2-5V grooves, 7.75 in od) BRACKET - harness HARNESS - compressor (for connectors see 115D14)

30 31

41-4280 41-1787 44-7327 44-5835

• CONNECTOR - shroud (6 pin) • CONNECTOR - tower (6 pin) • LOCK - secondary (6 pin connector) • BUSBAR (w/diode) • COVER - connector • CONNECTOR - tower (1 pin) • CONNECTOR - shroud (2 pin)
BELT - compressor ELBOW (1-1/8 x 1-1/8) TEE (1-3/8 x 1-1/8C x 1-1/8)

32 33 34

78-1732 55-5085 55-4308

112

242F1

COMPRESSOR GROUP (2C45049G24, KIT 702159)

Revised 2/16/10

113

Revised 2/16/10

COMPRESSOR GROUP (2C45049G24, KIT 702159)

242F1
QTY
1 1 1 2 1 1 1 1 1 1 20 8 4 12 4 2 6 4 8

REF
35 36 37 38 39 40 41 42 43 44

PART#
61-5074 55-7381 55-5996 66-1723 66-5307 99-7517 99-4954 92-8257 92-8258 92-8259 55-7123 55-2063 55-3423 55-5050 55-399 TUBE - SUCTION

DESCRIPTION
ADAPTER (#24 ORS) NUT DEHYDRATOR VALVE - check NAMEPLATE - Clutch Maintenance NAMEPLATE TK BRACKET - compressor BRACKET - sliding BRACKET WASHER - belleville SCREW (1.50 in long) SCREW (1.75 in long) NUT WASHER - spl (15/32 id) ROD - threaded FLATWASHER LOCKWASHER NUT

45

51-1997 55-2221 55-2200 55-3122

114

177H6
X640 COMPRESSOR ASSEMBLY 177H6 4/7/09

X640 COMPRESSOR ASSEMBLY

Revised 4/7/09

115

Revised 4/7/09

X640 COMPRESSOR ASSEMBLY

177H6
QTY
1 1 1 1 3 3 18 12 36 36 1 1 3 1 1 1 2 1 4 2 6 1 1 1 6 6 6 2 2 1 16 16 1 1 1 1 1 9

REF

PART#
102-502 102-503 102-657

DESCRIPTION
COMPRESSOR - X640 (w/ unloader, R12, R22, R502) COMPRESSOR - X640 (w/o unloader, R12, R22, R502) COMPRESSOR - X640 (w/o unloader, R134a, R407c)

1 2 3 4 5 6 7 8 9

23-126 22-789 33-2552 55-6805 55-6806 55-6804 33-2019 77-2306 22-748 55-4720

10 11 12 13 14

22-123 55-4213 77-169 55-3364 22-710 55-6822 55-6806 55-6804

15 16 17 18 19 20 21 22 23 24 25 26 27 28

55-4210 33-1704 22-696 22-692 33-408 22-990 33-2095 55-6751 22-747 55-896 55-1417 33-2515 33-2513 22-790 22-754 33-2120

29

55-9106

• CRANKCASE • HEAD - cylinder • GASKET - compressor cylinder head • SCREW - cylinder head (3/8-16 x 2) • SCREW - cylinder head (3/8-16 x 2-5/8) • WASHER - sealing • O-RING • BEARING - ball • CRANKSHAFT • PLUG - oil gallery • PLUG - oil metering • PIN - dowel • BEARING - ball • PLUG - pipe • MANIFOLD - discharge • SCREW - manifold (2-3/8) • SCREW - manifold (2-5/8) • WASHER - sealing • PIN - dowel • GASKET - housing • HOUSING - pump • SLEEVE - cylinder • O-RING • PLATE - valve • O-RING • PLUG - magnetic • SUMP - oil • FLATWASHER • SCREW - sump • GASKET - oil sump • GASKET - drive plate • PLATE - drive bearing (use w/ stainless steel bellows) • PLATE - drive bearing (use w/ neoprene seal) • SEAL - oil • SCREW - cover 116

177H6

X640 COMPRESSOR ASSEMBLY

Revised 4/7/09

117

Revised 4/7/09

X640 COMPRESSOR ASSEMBLY

177H6
QTY
9 1 1 3 6 1 1 1 1 1 6 1 2 12 1 2 1 1 2 2 1 1 2 2 3 2 2 1 1 1 1 1 1 1 2 2 9

REF
30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

PART#
55-896 22-708 33-672 33-2805 22-849 NSS NSS 55-2122 NSS 51-666 22-698 11-475 55-5717 22-1247 22-1100 22-568 22-707 99-4848 55-291 55-366

DESCRIPTION

47 48 49

33-2205 99-9174 55-165 55-366

50 51 52 53 54 55

22-653 33-822 22-350 55-6750 33-1223 11-5513 55-8431 11-7777 55-1983

56 57

22-697 55-681 51-149

58

55-183

• FLATWASHER • SCREEN - suction • O-RING - regulator • GASKET • PISTON •• HEAD - piston •• RING - valve •• RING - retaining •• PIN - piston •• NUT • ROD - connecting •• BUSHING •• SCREW - connecting rod • BEARING - connecting rod • SEAL - crankshaft • VALVE - check • SCREEN & TUBE - oil pickup • CLAMP - tube • NUT - clamp • LOCKWASHER • O-RING • BRACKET - tube • SCREW - bracket • LOCKWASHER • VALVE - check • O-RING - sight glass • SIGHT GLASS • PLUG - oil fill • O-RING • VALVE (Schrader) •• BODY - valve •• CORE - valve •• CAP - valve • COVER - pump • SCREW - cover (5/16) • FLATWASHER • SCREW - pump (3/8) 118

177H6

X640 COMPRESSOR ASSEMBLY

Revised 4/7/09

119

Revised 4/7/09

X640 COMPRESSOR ASSEMBLY

177H6
QTY
9 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

REF
59 60 61

PART#
55-896 22-784 33-239 55-4211 55-4210

DESCRIPTION

62 63 64 65 66 67 68

33-1175 22-1160 22-1149 33-1223 55-9760 55-6752 33-2095 67-404 203-513 203-518 30-246 203-346

• FLATWASHER (3/8) • REGULATOR - oil pressure • O-RING • PIN - dowel (outer) • PIN - dowel (inner) • O-RING - oil pump cover • PUMP •• SHAFT - oil pump •• O-RING • KEY - pump • PLUG - oil pump • O-RING
OIL - synthetic (R12, R22, R502) OIL - compressor (ester, R134a; R407c) KIT - acid test (polyol ester kit) KIT - gasket KIT - acid test

120

242F2
VALVE ASSEMBLY - SUCTION 242F2 10/31/10

VALVE ASSEMBLY - SUCTION

Revised 10/31/10

121

Revised 10/31/10

VALVE ASSEMBLY - SUCTION

242F2
QTY
1 1 1 1 1 1 1 1 1 1 1 1

REF
1 2 3 4 5 6 7 8 9 10 11

PART#
61-5070 66-5318 66-3015 33-350 61-5071 66-3615 55-6570 33-1777 55-1983 55-308 33-768 55-5672 VALVE - suction

DESCRIPTION

• VALVE - suction •• CAP - valve (brass, incl gasket) ••• GASKET - cap • TUBE - suction valve • FITTING - saddle • ADAPTER (#24 ORS)
O-RING CAP ELBOW GASKET - cap CAP - valve

122

242F3
VALVE ASSEMBLY - DISCHARGE 242F3 10/31/10

VALVE ASSEMBLY - DISCHARGE

Revised 10/31/10

123

Revised 10/31/10

VALVE ASSEMBLY - DISCHARGE

242F3
QTY
1 1 1 1 1 1 1 1 1 1 1 1

REF
1 2 3 4 5 6 7 8 9 10 11

PART#
61-5072 66-2140 66-3015 33-350 61-5073 55-7537 33-1777 55-308 33-768 55-1983 66-8086 66-7182 VALVE - discharge

DESCRIPTION

• VALVE - discharge •• CAP - valve (brass, incl gasket) ••• GASKET - cap • TUBE • ADAPTER (#20 ORS)
O-RING ELBOW GASKET - cap CAP - elbow FITTING - refrigerant (R134a)

• CAP - fitting (R134a)

124

153E8
CLUTCH REPAIR KIT (SMALL, 6.0 DIA COIL) 153E8 4/13/10

CLUTCH REPAIR KIT (SMALL, 6.0 DIA COIL)

Revised 4/13/10

125

Revised 4/13/10

CLUTCH REPAIR KIT (SMALL, 6.0 DIA COIL)

153E8
QTY
1 3 3 3 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

REF
1 2 3 4 5

PART#
107-192 55-3451 55-790 55-789 77-1491 70-105 77-1233

DESCRIPTION
KIT - clutch drive repair (does not incl pulley, field or plate)

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

33-1238 55-2717 33-928 33-1285 55-4021 55-110 55-2718 77-1487 77-2498 55-5283 55-3631 77-2392 55-6559 55-664 55-9088 45-1227 45-1998 45-1389 45-1965 44-7374 99-2477 44-3657 99-2975 33-564

• STUD - clutch • LOCKWASHER • NUT • SPACER - bearing • KIT - bearing (incl 6 thru 10 & grease) •• BEARING •• SEAL - rear •• SNAP RING - internal •• O-RING •• RETAINER & SEAL - front ••• FITTING - grease • SCREW - seal • LOCKWASHER • NUT - clutch • WASHER • SCREW (3.00 in lg)
SCREW (3.25 in lg)

• HUB & ARMATURE • SCREW - set • NUT
KEY - shaft FIELD - clutch (24V, before 9/01) FIELD - clutch (after 8/01) FIELD - clutch (24V) FIELD - clutch (24V, internally wired) FIELD - clutch (12V) NAMEPLATE - 24 Volt NAMEPLATE - 12 Volt NAMEPLATE - Caution GROMMET - wire PLATE TOOL - keyway alignment PULLEY (2-B/2-A grooves, 7.75/8.9 in od) PULLEY (2-5V grooves, 7.75 in od) PULLEY (2-B grooves, 7.75 in od) PULLEY (2-5V/2-3V grooves, 7.75/8.9 in od) PULLEY (2-5V/2A grooves, 7.75/8.9 in dia) PULLEY (12K grooves, 7.75 in od) PULLEY (2-5V/2-A groove, 7.95/8.9 in od)

21 22 23 24 25 26 27 28 29

77-1083 204-972 77-1663 77-1672 77-1752 77-1875 77-2128 77-2290 77-2355

126

153E8

CLUTCH REPAIR KIT (SMALL, 6.0 DIA COIL)

Revised 4/13/10

127

Revised 4/13/10

CLUTCH REPAIR KIT (SMALL, 6.0 DIA COIL)

153E8
QTY
1 1 1 A/R

REF
30 31 32

PART#
77-2524 204-481 204-477 204-476 PULLER - clutch GUN - grease

DESCRIPTION
PULLEY (12K grooves, 7.75 inch od)

GREASE - bearing (3.5 ounce)

128

INDEX NUMERICAL BY PART NUMBER
102-1000 102-502 102-503 102-570 102-571 102-586 102-587 102-633 102-657 102-667 102-668 102-669 102-736 102-742 102-768 102-785 102-807 102-808 102-809 102-812 102-813 102-815 102-842 102-843 102-875 102-896 102-899 102-903 102-904 102-905 102-994 102-999 107-150 107-192 107-226 107-241 107-242 107-261 107-262 107-301 107-311 107-312 107-313 107-315 107-316 107-324 107-332 107-333 107-334 107-336 107-337 107-338 107-345 107-356 107-357 107-367 11-2886 88 116 112, 116 90, 92, 98, 106 90, 92, 98, 100, 102, 104, 106 90 90 80, 84, 86 116 90, 92, 106 90, 92, 96, 98, 104, 106 82, 84, 86 84, 86 84, 86 88 88 90, 92, 98 84, 86 84, 86 88 88 88, 96 90, 92 92 90, 92 88 90, 92, 106 90, 92, 106 90, 92, 108 90, 92, 108 84 84 112 126 82 90, 92, 98, 106 90, 92, 100, 102, 106 92, 106 90, 92, 96, 98, 104, 106 90 90, 92, 98 90 90 88 88 98, 104 84, 86 88 88 88, 96 80, 84, 86 84, 86 84, 86 84 84 88 90, 94, 96, 98, 100, 102, 104, 106 11-475 11-5513 11-7777 20-150 20-151 20-193 203-346 203-427 203-502 203-504 203-513 203-515 203-518 203-524 203-532 204-476 204-477 204-481 204-972 22-1009 22-1053 22-1100 22-1121 22-1122 22-1123 22-1149 22-1160 22-123 22-1247 22-1261 22-1262 22-1263 22-1335 22-350 22-568 22-653 22-692 22-696 22-697 22-698 22-707 22-708 22-710 22-747 22-748 22-754 22-784 22-789 22-790 22-849 22-990 22-992 22-993 23-126 30-246 118 118 90, 96, 98, 102, 106, 118 90, 92, 96, 98, 100, 104 90, 92, 98, 104 90, 94 120 98, 104 86, 106 86, 106 120 80, 84, 90, 92, 96, 102 120 14 88 128 128 128 126 92 92, 98, 106 118 90, 96, 98, 100, 104, 106 106 106 120 120 116 118 80, 84, 86 80, 84, 86 88, 90, 92, 96, 98 88 118 118 118 116 116 118 118 118 118 116 116 116 116 120 116 116 118 116 92, 106 92 116 120 306-293 306-301 104, 33-1162 33-1175 102, 33-1223 33-1238 33-1285 33-1704 33-1777 33-1924 33-2019 33-2095 33-2120 100, 33-2134 33-2205 33-2212 82 82 12 120 118, 120 126 126 116 112, 122, 124 12 116 116, 120 112, 116 12 118 22, 30, 32, 34, 36, 40, 42, 44, 46, 48, 52, 54, 56, 58, 62, 64 112 120 32, 44 116 116 116 112, 118 22, 32, 34, 36, 44, 46, 48, 72, 76, 78 106 86, 106 86, 106 90, 92, 106 32, 34, 36, 40 122, 124 26, 42, 54, 56, 58, 62, 64, 74, 76, 78 54, 56, 58, 60, 62, 64 54, 56, 58, 62, 64 116 80, 84, 86 126 88, 118 92, 112, 122, 124 118 112 126 14 102 112 112 112 32, 34, 38, 50 56 56 110 110 14 104 104 112

33-230 33-239 33-2440 33-2513 33-2515 33-2552 33-2805 102, 33-282 33-2846 33-2847 33-2848 33-2882 33-2975 33-350 33-3812 33-3813 33-3814 33-408 33-4305 33-564 33-672 33-768 33-822 33-920 33-928 40-885 41-1501 41-1787 41-1789 41-1790 41-2769 41-2780 41-2781 41-3227 41-3229 41-3590 41-4146 41-4147 41-4209

INDEX - 1

INDEX NUMERICAL BY PART NUMBER
41-4280 41-4486 41-4530 41-4531 41-4809 41-4949 41-5183 41-5670 41-5671 41-5672 41-5673 41-5674 41-5760 41-593 41-594 41-6064 41-6160 41-6810 41-7669 41-8321 41-8570 41-9163 41-9321 41-9322 41-9323 41-9835 44-2791 44-2792 44-3657 44-5066 44-5835 44-5838 44-5884 44-5885 44-6324 44-6381 44-6959 44-7327 44-7374 44-7812 44-7881 44-8294 44-8661 44-8681 44-9569 45-1227 45-1389 45-1965 45-1998 51-1227 51-1228 51-1229 51-149 51-1652 112 112 104 104 112 34, 46, 50 112 14 14 14 14 14 32, 38 90, 92, 98 90, 92, 96, 98, 100, 102, 104 102 110 50 34 14 10 26, 70 110 110 112 76, 78 10 10 126 110 10, 112 10 88, 90, 92, 98, 100, 102, 104 92 10 110 26, 70, 76, 78 88, 90, 92, 98, 100, 102, 104, 112 126 10 10 112 100, 102, 104 90, 98 22, 26, 32, 38, 70, 72, 74, 76, 78 126 126 112, 126 126 20, 22, 24, 26, 28, 32, 34, 36, 40, 46, 48, 52 36, 48 36, 48 118 88, 90, 94 51-1997 51-2108 51-257 51-262 114 66, 68, 70, 72, 74, 76, 78 32, 34, 44, 46 20, 22, 24, 26, 28, 30, 32, 34, 36, 40, 42, 44, 46, 48, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78 26, 30, 32, 34, 36, 40, 42, 44, 46, 48, 52, 54, 56, 58, 60, 62, 64, 70, 74, 76, 78 54, 56, 58, 60, 62, 64 36, 48, 54, 56, 58, 60, 62, 64 52 118 20, 22, 24, 26, 28, 30, 32, 34, 36, 40, 42, 44, 46, 48, 52 126 112 116 118 32, 44, 68, 70, 72, 76, 78 118 92, 112, 118, 122, 124 10 32, 44 114 118 114 114 10, 22, 32, 36, 48, 72 14 14 126 126 54, 56, 58, 62, 64 118 10 66, 74 30, 42 10 112, 122, 124 114 90, 94, 96, 98, 100, 102, 104, 106, 112, 116 114 126 126 118 32, 44 112 10 114 12, 126 116, 120 120 55-4213 55-4308 55-448 55-4702 55-4720 55-5050 55-5085 55-5130 55-5283 55-5406 55-5672 55-5717 55-5996 55-6559 55-6570 55-664 55-671 55-6750 55-6751 55-6752 55-6804 55-6805 55-6806 55-681 55-6822 55-7000 55-7123 55-7213 55-7381 55-7537 55-789 55-790 55-8310 55-8431 55-8537 55-8648 55-8743 55-8778 55-896 55-9088 55-9106 55-9760 55-9783 55-9790 55-9793 55-9798 55-9799 55-9800 55-9801 55-9802 55-9803 55-9804 55-9805 55-9806 116 112 14 12 116 114 112 22, 26, 30, 34, 36, 40, 42, 46, 48, 52, 72 126 80, 84, 86 90, 96, 98, 100, 102, 104, 106, 122 118 114 126 122 126 14 118 116 120 112, 116 116 116 118 116 94 114 96, 98, 102, 104, 112 114 124 126 126 36, 48, 54, 56, 58, 60, 62, 64 118 90, 96, 98, 100, 102, 104, 106 90, 94, 96, 98, 100, 102, 104, 106 92 92 112, 116, 118, 120 126 116 120 106 86, 106 86 86 106 106 86, 106 86 86 106 106 106

51-294

51-295 51-296 51-362 51-666 51-773

55-110 55-129 55-1417 55-165 55-1714 55-183 55-1983 55-2001 55-2012 55-2063 55-2122 55-2200 55-2221 55-2330 55-2363 55-2641 55-2717 55-2718 55-2818 55-291 55-2965 55-2988 55-3010 55-3020 55-308 55-3122 55-3364 55-3423 55-3451 55-3631 55-366 55-3669 55-3674 55-396 55-399 55-4021 55-4210 55-4211

INDEX - 2

INDEX NUMERICAL BY PART NUMBER
55-9876 56-2330 61-1084 61-1085 61-1086 61-1087 61-1088 61-1089 61-1099 61-1382 61-1893 61-2236 61-2481 61-5070 61-5071 61-5072 61-5073 61-5074 651-148 66-1723 66-2140 66-3015 66-3615 66-5307 66-5318 66-7041 66-7182 66-8086 66-9466 67-1894 67-1895 67-1896 67-1980 67-1981 67-2029 67-2030 67-2031 67-2148 67-2149 67-2150 67-2151 67-2283 67-2284 67-2285 67-2286 67-2412 67-404 70-105 77-1083 77-1233 77-1487 77-1491 77-1663 77-1672 77-169 77-1752 77-1875 77-2128 77-2290 36, 48 34 86, 106 86, 106 86, 106 86, 106 86, 106 86, 106 16, 20, 24, 28 66, 68 54, 56, 58, 62, 64 112 44 112, 122 122 112, 124 124 114 110 114 124 122, 124 122 114 122 92 124 124 112 36, 54 56 58, 62, 64 46 44 30 30 30 32, 44 48 52 48 36 40 34 32 10 120 126 112, 126 126 126 126 126 112, 126 116 126 126 126 126 77-2306 77-2355 77-2389 77-2392 77-2498 77-2524 77-2935 77-2940 77-2941 77-2942 77-2943 78-1328 78-1399 78-1549 78-1732 78-1781 841-3590 91-7520 91-7543 91-7754 91-9862 92-230 92-232 92-233 92-2642 92-2643 92-2644 92-2645 92-2646 92-2647 116 126 12 126 126 128 12 12 12 12 12 54, 56, 58, 62, 64 22, 26, 30, 32, 34, 36, 40, 42, 44, 46, 48, 52 10 112 70, 72, 74, 76, 78 14 84, 88 80, 84, 88, 96 30, 38, 48 30, 32, 34, 44, 46, 50 16 16 16 36, 48, 54, 56, 58, 60, 62, 64 54, 56 54, 58, 60, 64 54 54 16, 20, 22, 24, 26, 28, 32, 34, 36, 40, 44, 46, 48, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78 32, 34, 36, 40, 44, 46, 48, 52, 54, 56, 58, 60, 62, 64 22, 24, 26, 28, 32, 34, 36, 40, 44, 46, 48, 52, 54, 56, 58, 60, 62, 64, 68, 70, 72, 74, 76, 78 22, 24, 26, 28, 32, 34, 36, 40, 44, 46, 48, 52, 54, 56, 58, 60, 62, 64, 68, 70, 72, 74, 76, 78 20, 26, 32, 36, 44, 50, 54, 56, 58, 60, 62, 64, 66, 70 56, 60 56, 58 56 56 58, 60, 62 58 58 58 60 92-2661 92-2662 92-2663 92-2664 92-2665 92-2700 92-2954 92-2955 92-2956 92-3056 60 60 62, 64 62 64 112 56 62 64 22, 24, 26, 30, 34, 40, 42, 46, 52, 68, 70, 72, 74, 76 32 20, 28, 30, 34, 36, 40, 42, 44, 46, 48, 52, 66, 78 22, 34, 38, 40, 42, 46, 70, 72, 74 112 22, 26, 42, 70, 72, 74, 76, 78 32, 34, 44, 46 44 22, 24, 26, 32, 36, 44, 48, 68, 70, 72, 76 20, 22, 26, 28, 32, 36, 44, 48, 66, 70, 72, 74, 76, 78 32, 36, 44, 48 70, 72, 76, 78 30, 42 30, 42 22, 26, 30, 36, 42, 48, 72, 74 30 30 36, 48 36, 48 22, 26, 32, 34, 36, 48 36 32 10 20, 24, 28, 66, 68, 72 22, 24, 28, 42, 68, 72, 74 20, 26, 66, 70, 76, 78 20, 22, 24, 26, 28 20, 24, 28 22 26 110 114 114 114 66, 68, 70, 72, 76 66, 68, 78 70 70, 76, 78 72 72, 74 78

923057 92-3057 92-3185 92-3253 92-3279 92-3410 92-3429 92-3430 92-3431

92-3432 92-3785 92-4103 92-4104 92-4105 92-4106 92-4107 92-5031 92-5032 92-5033 92-6094 92-6096 92-7368 92-7767 92-8083 92-8084 92-8085 92-8086 92-8087 92-8088 92-8256 92-8257 92-8258 92-8259 92-8960 92-8961 92-8962 92-8963 92-8964 92-8965 92-8966

92-2648

92-2649

92-2650

92-2651

92-2652 92-2653 92-2654 92-2655 92-2656 92-2657 92-2658 92-2659 92-2660

INDEX - 3

INDEX NUMERICAL BY PART NUMBER
92-8967 92-8968 92-8969 98-6765 98-6767 98-6920 98-6928 98-7240 98-7241 98-7242 98-7317 98-7705 98-7706 99-2477 99-2975 99-4848 99-4954 99-6968 99-7336 99-7517 99-9174 76, 78 76 74 46 32, 44 42 30 36, 48 48 40, 52 32, 44 36 34 126 126 118 114 30 22, 26, 42, 44, 46, 70, 72, 74, 76, 78 114 118

INDEX - 4

INDEX ALPHABETICAL BY DESCRIPTION
72, 74 CAP - fitting 124 CAP - flare 92 CAP - insulator 14 B BANDWRAP 10, 22, 32, 34, 36, 48, 72 CAP - valve 100, 102, 104, 106, 112, 118, 122, 124 BEARING 12, 126 CLAMP 20, 22, 24, 26, 28, 30, 32, 34, BEARING - ball 116 36, 40, 42, 44, 46, 48, BEARING - connecting rod 118 52, 54, 56, 58, 60, 62, BELT - compressor 112 64, 66, 68, 70, 72, 74, BLOWER 22, 26, 30, 32, 34, 36, 40, 76, 78 42, 44, 46, 48, 52, 54, CLAMP - harness 48 56, 58, 62, 64, 70, 72, CLAMP - hose 36, 48 74, 76, 78 CLAMP - manifold 94 BLOWER - assembly 10 CLAMP - slider 26, 30, 32, 34, 36, 40, BODY - valve 104, 118 42, 44, 46, 48, 52, 54, BRACKET 16, 20, 26, 32, 34, 36, 40, 56, 58, 60, 62, 64, 70, 44, 50, 54, 56, 58, 60, 74, 76, 78 62, 64, 66, 70, 114 CLAMP - tube 118 BRACKET - back 62, 64 CLUTCH 80, 84, 86, 88, 90, 92, 96, BRACKET - back wall 26, 70, 76, 78 98, 100, 102, 104, 106 BRACKET - back wall end 26, 76, 78 BRACKET - bottom 22, 24, 26, 28, 30, CLUTCH - assembly 112 COIL 90, 92, 96, 98, 100, 102, 104 32, 34, 36, 40, 42, 44, COIL - heater 10, 20, 22, 24, 26, 44, 46, 48, 52, 54, 56, 58, 46, 48, 52, 54, 56, 58, 60, 62, 64, 68, 70, 72, 62, 64, 66, 68, 70, 72, 74, 76, 78 74, 76, 78 BRACKET - compressor 114 COMPRESSOR - TM16 104 BRACKET - end 56 BRACKET - fasting profile 20, 24, 28, COMPRESSOR - TM16-HD DM 90, 92, 106, 108 66, 68, 72 COMPRESSOR - TM16-XD 92, 100, BRACKET - front 46, 54, 56, 58, 60 102, 104, 106 BRACKET - harness 112 BRACKET - manifold 90, 96, 100, 102, COMPRESSOR - TM-21 HD 88 COMPRESSOR - TM31 80, 82, 84, 86 104, 106 COMPRESSOR - TM31 HD 84 BRACKET - middle 58, 60 COMPRESSOR - X640 112, 116 BRACKET - sliding 114 COMPRESSOR TM16 96 BRACKET - top 22, 24, 26, 28, 32, 36, COMPRESSOR TM16-XD 90, 92, 98 44, 46, 48, 52, 54, 56, COMPRESSOR TM21 96 58, 60, 62, 64, 68, 70, COMPRESSOR TM21 HD 88 72, 74, 76, 78 COMPRESSOR TM-21 HD 88 BRACKET - tube 118 BRACKET - tubes 54, 56, 58, 60, 62, CONNECTOR 32, 34, 38, 46, 50, 104, 110 64 CONNECTOR - compressor 92, 98, BRACKET - wall 22, 24, 28, 66, 68, 72, 106 74 CONNECTOR - female 110 BRACKET - wall end 22, 24, 68, 72 CONNECTOR - shroud 10, 22, 26, 38, BRACKET - wall left 20 70, 72, 74, 76, 78, 112 BRACKET - wall right 20 CONNECTOR - tower 10, 26, 70, 76, BRACKET - wire support 112 78, 88, 90, 92, 98, 100, BRACKET-MANIFOLD COMPR CSTG 102, 112 98 CONVECTOR 16 BUSBAR 112 CONVECTOR - coil 44, 48, 56, 58, 60, BUSHING 12, 118 62, 64 CONVECTOR - FAC/TKV 18, 26, 70, C 78 CAP 122 CONVECTOR - FAC/TKV 800 76 CAP - elbow 124 CONVECTOR - FAC\TKV 22 CAP - end 26, 70, 76, 78 CAP - end piece 20, 22, 24, 28, 66, 68, CONVECTOR - FAC\TKV 800 72, 74

A

ADAPTER 114, 122, 124

CONVECTOR - TKV 800 18, 20, 24, 28, 66, 68 CORE - valve 96, 102, 104, 106, 118 COVER 16, 20, 22, 24, 26, 28, 36, 48, 62, 64, 66, 68, 70, 72, 74, 76, 78 COVER - back 32, 34, 36, 40, 44, 48, 52, 54, 58, 62, 64 COVER - back end 56, 60 COVER - connector 112 COVER - convector 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64 COVER - end 30, 32, 34, 36, 40, 42, 44, 46, 48, 52, 62, 64 COVER - front 30, 32, 34, 36, 40, 42, 56, 58, 60 COVER - front end 54, 56, 58, 60 COVER - middle 32, 36, 44, 48, 54, 56, 58, 60 COVER - pump 118 CRANKCASE 116 CRANKSHAFT 116

D
DEHYDRATOR 114 DRIVE - motor 14

E
ELBOW 112, 122, 124 EXTRUSION 22, 26, 30, 42, 70, 72, 74, 76, 78 EXTRUSION - rubber 38, 48

F
FIELD - clutch 112, 126 FILTER 10 FILTER - compressor 92 FILTER - RFI 14 FILTER - suction 88, 90, 96, 98 FITTING - discharge 80, 84, 86, 106 FITTING - grease 12, 126 FITTING - oil return 92 FITTING - refrigerant 124 FITTING - saddle 122 FITTING - suction 80, 84, 86, 106 FITTING - suction valve 112 FLATWASHER 10, 14, 112, 114, 116, 118, 120

G
GASKET 92, 118 GASKET - cap 122, 124 GASKET - compressor cylinder head 116 GASKET - discharge valve 112 GASKET - drive plate 116 GASKET - extruded 16 GASKET - housing 116 GASKET - oil sump 116

INDEX - 1

INDEX ALPHABETICAL BY DESCRIPTION
GASKET - switch 112 GREASE - bearing 128 GROMMET 22, 30, 32, 34, 36, 40, 42, 44, 46, 48, 52, 54, 56, 58, 62, 64, 72, 76, 78 GROMMET - wire 126 GUN - grease 128

N
NAMEPLATE - 12 V 88 NAMEPLATE - 12 Volt 126 NAMEPLATE - 12VDC 84 NAMEPLATE - 24 V 88 NAMEPLATE - 24 VDC 96 NAMEPLATE - 24 Volt 126 NAMEPLATE - 24VDC 80, 84 NAMEPLATE - Caution 126 NAMEPLATE - Clutch Maintenance 114 NAMEPLATE TK 114 NUT 10, 114, 118, 126 NUT - brass 14 NUT - captive 48 NUT - clamp 118 NUT - clutch 126

R
REGULATOR - oil pressure 120 RETAINER & SEAL - front 126 RING - retainer 12 RING - retaining 118 RING - valve 118 RIVET 24, 26, 28, 30, 42, 44, 46, 68, 70, 76, 78 RIVET - bracket 32, 34, 36, 40, 46, 48, 52, 72 RIVET - clamp 32, 34, 36, 40, 48, 52 RIVET - clamp, profile, bracket & stiffener 30, 42 RIVET - cover 32, 34, 36, 40, 48, 52 RIVET - cover, plastic 32, 34, 36, 40 RIVET - heater 30, 42 RIVET - holder 32 RIVET - plastic 20, 22, 24, 26, 28, 44, 46, 48, 52, 66, 68, 70, 72, 74, 76, 78 RIVET - slot 32, 34 RIVET - steel 20, 22, 66, 72, 74 RIVET - stiffener 36, 48, 72 RIVET- bracket 36 ROD - connecting 118 ROD - threaded 114

H
HARNESS 50, 110 HARNESS - blower 26, 70, 76, 78 HARNESS - blower motor 10 HARNESS - compressor 112 HARNESS - convector 32, 34, 38 HARNESS - temperature sensor 56 HEAD - cylinder 116 HEAD - piston 118 HEATER 30, 42 HEATER - assy 32, 34, 36, 40 HEATER - coil 22, 28, 72 HOLDER - open slot 32 HOSE 48 HOSE - discharge 82, 86, 106, 112 HOSE - silicone 36, 54, 56, 58, 62, 64 HOSE - suction 82, 86, 106, 112 HOUSING - pump 116 HUB & ARMATURE 126

O
OIL - compressor 80, 84, 86, 88, 90, 92, 96, 100, 102, 104, 106, 120 OIL - SOLEST 120 98 OIL - synthetic 120 O-RING 12, 80, 84, 86, 88, 90, 106, 116, 118, 120, 122, 124, 126 O-RING - discharge 112 O-RING - manifold 92 O-RING - oil pump cover 120 O-RING - regulator 118 O-RING - sight glass 118 O-RING - suction 112 O-RING - suction valve 112

I
IDLER - pulley mount assembly 12 INSERT 36, 54, 56, 58, 60, 62, 64 INSULATION 50

S
SCREEN 72, 74, 76, 78 SCREEN - suction 118 SCREEN & TUBE - oil pickup 118 SCREW 10, 58, 90, 96, 98, 114, 126 SCREW - bracket 54, 56, 60, 62, 64, 100, 102, 104, 106, 118 SCREW - connecting rod 118 SCREW - cover 36, 48, 116, 118 SCREW - cylinder head 116 SCREW - discharge valve 112 SCREW - fittings 80, 84, 86 SCREW - manifold 88, 90, 94, 116 SCREW - pump 118 SCREW - seal 126 SCREW - set 126 SCREW - sump 116 SCREW - valve 112 SEAL 12 SEAL - cable 10, 90, 92, 98 SEAL - connector 100, 102, 104 SEAL - crankshaft 118 SEAL - oil 112, 116 SEAL - rear 126 SENSOR - RT 56 SHAFT - oil pump 120 SIGHT GLASS 118 SLEEVE - cylinder 116 SLEEVE - insulating 14 SLEEVING - heat shrink 14 SLIDER 20, 22, 24, 26, 28, 32, 34, 36, 40, 66, 68, 70, 72, 74,

K
KEY - pump 120 KEY - shaft 126 KIT - acid test 120 KIT - bearing 126 KIT - clutch drive repair 112, 126 KIT - gasket 120 KIT - manifold 88, 90, 92, 94, 96, 98, 100, 102, 104 KIT - power stud cleanup 14 KNOB 110

P

PIN - dowel 116, 120 PIN - piston 118 PISTON 118 PLATE 112, 126 PLATE - drive bearing 116 PLATE - mount 12 PLATE - switch 110 PLATE - valve 116 PLUG 90, 94, 96, 98, 100, 102, 104 L PLUG - cavity 10 LOCK - secondary 112 PLUG - magnetic 116 LOCKWASHER 10, 14, 36, 48, 54, 56, PLUG - oil fill 118 58, 60, 62, 64, 90, 94, PLUG - oil gallery 116 96, 98, 100, 102, 104, PLUG - oil metering 116 106, 114, 118, 126 PLUG - oil pump 120 PLUG - pipe 106, 112, 116 M PROFILE - fastening 30, 42 MANIFOLD - compressor 92, 106 PULLER - clutch 128 MANIFOLD - discharge 106, 116 PULLEY 12, 112, 126, 128 MANIFOLD - suction 106 PULLEY - clutch 82 MOUNT - bandwrap 22, 32, 34, 36, 72 PULLEY - complete 12 MOUNT - cable tie 26, 48, 70, 76, 78 PUMP 120

INDEX - 2

INDEX ALPHABETICAL BY DESCRIPTION
76, 78 SLIDER - bottom 32, 34, 36, 40, 44, 46, 48, 52, 54, 56, 58, 60, 62, 64 SLIDER - top 44, 46, 48, 52, 54, 56, 58, 60, 62, 64 SLOT - open 32, 34, 44, 46 SNAP RING - internal 126 SPACER - bearing 126 SPACER - brass 14 SPINDLE - hub 12 STIFFENER 22, 26, 30, 36, 42, 48, 70, 72, 74, 76, 78 STRIP 26, 30, 36, 42, 44, 46, 54, 56, 58, 60, 62, 64, 70, 74, 76, 78 STRIP - neoprene 22, 26, 32, 34, 36, 38, 40, 70, 72, 74, 76, 78 STRIP - sealing 44, 46 STUD - clutch 126 SUMP - oil 116 SUPERLUBE 14 SWITCH - 3 speed 110 SWITCH - hpco 102, 104, 112 SWITCH - lpco 102, 104, 112 SWITCH - only 104, 112 SWITCH - thermostatic 110 VALVE - high pressure relief 92 VALVE - suction 112, 122

W
WALL - back 30, 42 WASHER 30, 126 WASHER - belleville 114 WASHER - sealing 112, 116 WASHER - spl 114

T
TAPE 30 TEE 112 TERMINAL 14 TERMINAL - female 88, 90, 92, 98, 100, 102, 104 TERMINAL - fingrip 110 TERMINAL - pin 110 TERMINAL - ring 10 TKV 800 32, 36 TOOL - keyway alignment 126 TUBE 44, 124 TUBE - SUCTION 114 TUBE - suction valve 122

U
UNION 20, 22, 24, 28, 66, 68, 72, 74 UNION - end 26, 70, 76 UNION - middle 26, 70, 76, 78

V
VALVE 90, 94, 98, 106, 118 VALVE - assembly 90, 96, 98, 100, 102, 104 VALVE - bleed 16 VALVE - body 96, 98, 102 VALVE - cap 90, 96, 98 VALVE - check 114, 118 VALVE - deaerate 20, 66 VALVE - dearate 24, 28, 68 VALVE - discharge 112, 124

INDEX - 3

INDEX ALPHABETICAL BY DESCRIPTION

INDEX - 4

Ingersoll Rand’s Climate Solutions sector delivers energy-efficient HVACR solutions for customers globally. Its world class brands include Hussmann, a manufacturer of refrigeration and food merchandising solutions, Thermo King, the leader in transport temperature control and Trane, a provider of energy efficient heating, ventilating and air conditioning systems, building and contracting services, parts support and advanced controls for commercial buildings and homes.

Distributed by:

Thermo King Corporate
314 West 90th Street Minneapolis, MN 55420 Direct (952) 887-2200

TK 54309-3-PM ©2011 Ingersoll Rand Company Printed in U.S.A.

Similar Documents

Premium Essay

Managers

...Managers who are clearly experienced and properly educated and want to be sophisticated need to have the following qualities as a manager: globalization, technology, innovation, diversity, and most importantly ethics. Managers would use globalization to expand their business globally, and to increase sales and representation of company’s existence. The use of technology is very important for a manger to know as an instinct. Technology is everywhere in today’s modern world. Managers who don’t know how to use the computer or know how to type, is really pretty much useless in reality. It is very important for managers to learn how to communicate efficiently with the use of modern technology such as chat and e-mail. Innovation is a key success point in a creative manager. Managers should always be looking for new innovative ways to do things. For example if a manger uses chat and e-mail to communicate, will a manger will be better off if they were to use social website to not only represent and market the company but communicate broadly to all employees at once. Therefore the use of social websites has 3 advantages oppose to just the use of e-mail and chat. Social websites advantages are free marketing, so the public can view what the company has wrote. Second broad communication to all employees at the same time, and third representation; making positive remarks about the business to consumers and these are few examples a manager can demonstrate innovation. Diversity is one...

Words: 418 - Pages: 2

Free Essay

Manager Expectations

...My definition of a great manager is one who “gets things done through people”; if you want it right you don’t always have to do it yourself. In addition, there is a quote by the philosopher Lao Tzu that I absolutely feel sums up a great leader: “Go to the people. Live with them. Learn from them. Love them. Start with what they know. Build with what they have. But with the best leaders, when the work is done, the task accomplished, the people will say "We have done this ourselves". Leadership: * Be a servant manager – Take a humble approach with your direct reports (supervisors) and work for them, and not the other way around. Treat your direct reports and their employees with dignity, stay focused on the moment and do not multitask when speaking with employees, never interrupt them, listen to them intensely, smiling, saying please and thank you, acknowledge and welcome the contributions of your staff, quickly admit your mistakes, apologize as needed, never have to be the smartest person in the room, spend time on the front lines with your staff, and engage your customers. * Be a positive leader – You will set the tone for the entire staff in your department. If you are down and acting as if you are fighting against the world your staff will feel that same way. Your example is the personality reflected throughout the entire department. I expect you to be a positive leader. You are always setting an example for your staff to follow. Is it a good example, or a bad example...

Words: 1240 - Pages: 5

Premium Essay

The Human Manager

...The Humane Manager: Role and Relevance in managing people in an organisation “Great management is about character and not technique “ Presenters - Anurag, Ashish, Abhishek, Sumanta, Suvrodip There are two categories of managers we come across in our daily life.One the Good Managers and the other Great Mangers. A good manager has all the technical proficiencies one expects a manger to have,what a b-school may instill in him/her,the stats,the data analysis,the curve-fittings,the collective bargaining and negotiation skills,the strategies.These are the subjects which can be taught.But we are still in the dark ages when it comes to teaching people how to behave like great managers- how to instill courage and integrity,how to stand up for human dignity and rights.These are things that cannot be taught.Managers are not responsible for other’s happiness we say,the workplace is not a nursery school we say, we have market shares and profits to bother,power is too useful to and entertaining to dribble away on relationships,we have go tour own nests to feather. But the only people who become great managers are the ones who believe in their guts that managing is not just a set of mechanical processes but a series of human interactions. We may love and work hard for the manager who knows little for a manager who knows little about pay roll management, marketing or computers ,but we almost invariably dislike and thwart managers who are mean-spirited...

Words: 280 - Pages: 2

Premium Essay

Manager Paper

...TTH 6 November 25, 2014 Manager Paper I interview Anthony Rodriguez the General manager of TGI Friday’s in Rancho Cucamonga. TGI Friday's is a franchise restaurant that serves a variety of food items (like burgers, pasta, wings, salads). The TGI Friday’s, in Rancho Cucamonga, has a large amount of traffic with weekly sales of 90 to 100 thousand and about 60 employees. Anthony has no college education but has read many manger books like the One Minute Manager and Good to Great. Before becoming a General manager of TGI Friday’s, he uses to be a server for a different Friday’s. The purpose of the interview was to determine how a manager plans their day-to-day operations and how they motivate employees. Planning is a very important for managers since it helps them understand their overall task with steps needed to accomplish such task. However there is not right way to plan so everyone has his or her own ideas of planning. For Anthony planning means creating a list of his entire task. At times he is asked to increase the use of customer loyalty program (a program offered at Friday’s that allows customers to earn points on purchase and allows them to receive free items). So he brainstormed and came up with idea of creating a game by offering top servers with the most sign up a gift card. Later he executed his plan, which end up being a success since it increased sign ups. Motivating employees to perform everyday task is an important task for a manager. TGI Friday’s offers employee’s...

Words: 511 - Pages: 3

Premium Essay

Case Manager Interview

...Case Manager Interview Case Manager: Merventine Scott Organization: Family and Youth Services Assessment and reassessment 1. When clients are referred to your organization, what process or procedure is followed to assess your client (such as psychological, social, medical, et cetera)? When clients are referred to Family and Youth Services an initial assessment is performed, which includes information on a clients demographics, residential status, income, insurance coverage, mental or medical history, and main reason for seeking service. The process also includes an overview of different areas of need such as shelter, food, safety, and health care. 2. What steps do you take to stay up to date on current services or changes in available services? Family and Youth Services management team sends program coordinators, qualified professionals, counselors, and other licensed staff out every month to meetings held for service providers. The staff comes back and we have conferences to review and discuss changes and make sure that everyone understands the new policies and procedures for these changes. We also make time for networking to research additional information on what services are available and share and use other information from neighboring agencies. 3. Can you describe the standards you use in writing up assessments, reports, and recommendations? All case managers should utilize the Standards of Practice for Case management. The case manager should complete all assessments...

Words: 1200 - Pages: 5

Premium Essay

Roles of a Financial Manager

...The role of the financial manager has in maximizing shareholders value is key to the achieving the goals of the shareholders. The financial manager performs double duty working toward achieving profits for the company and optimizing the shareholders value. The flexibility of having the ability to hear viewpoints from different angles to achieve the goals of both the shareholders and the company’s manager. Today’s financial manager must have the skills and strength to evaluate and assess risks to help their company maintain a competitive edge. The responsible of the financial manager in maximizing shareholders and use real-time financial information to take advantage of the latest opportunity to capitalize on an investment. According to the text the financial managers works to achieve the goals of shareholders because shareholders are the owners of the company that employs the financial manager. This can give rise to conflict when a manager makes decision because of the needed to make decisions based on shareholders approval and what is best for the company ongoing success. Sometimes the goals of shareholders can tempt the financial manager to make unethical decision in managers attempt to maximize the goals of the shareholder value. Other times companies will have a disregard of shareholders values and not only disregard reducing expenses but foster an environment where financial abuse takes place from renting luxury cars to doing business at the most expensive...

Words: 738 - Pages: 3

Premium Essay

What Make a Good Manager?

...Governors University Course: TJP1 TASK 1 What Makes a Good Manager? The purpose for the presentation is to inform the audience about my perspective on a good manger; and also the skills that employers may want in a manger. The audience for the presentation is any individual or company that is interested in a subordinate’s views of a good manager. The significance of the chosen topic is to shown several key management skills, which managers should strive to have. Presentation Outline I. What Makes a Good Manager? A. Hi. I am a student at WGU. The topic that I will be discussing is “What Makes a Good Manager?” I have worked for several companies, while dealing with different types of managers. My experience with these managers has shown me that not everyone can be a good manger. I believe that there are different types of skills; a good manager should have in the workforce to develop the company and its employees. At the end of this presentation, you will not only know my perspective on a good manger, but also the skills that employers may want in a manager. II. The Seven Management Skills ☺ Delegate tasks wisely to the employees ☺ Establish goals for the employees ☺ Be adaptable in your communicative skills ☺ Make time for the CEO, clients, and employees ☺ Identify achievements of their employees ☺ Think about permanent solutions, not quick fixes ☺ Don’t take things too seriously III. Delegate Tasks Wisely ☺ A good manager must be able to delegate tasks wisely to the employees...

Words: 1422 - Pages: 6

Free Essay

The Changing Role of the Relationship Manager

...The Changing Role of the Relationship Manager The relationship between wealth managers and their clients is not what it used to be. Public opinion of the financial sector, as a whole, has become sharply critical—people are outraged by the inability of the industry. Clients have become far less trusting and increasingly likely to jump to another wealth manager. But the relationship between RMs and their clients has actually changed well before the onset of crisis. Rise of the Product-Push Model before a Crisis At many wealth-management institutions, particularly the larger ones, the continuity of client relationships has— over time—been disrupted by organizational changes and the shuffling of client portfolios among RMs. In some cases, the goal was to bind the client more to the institution than to an individual advisor. In other cases, however, the institution itself simply could not maintain a consistent service model. At the same time, investors became more interested in diversifying their wealth across institutions. And as information about financial products became more accessible, some investors became self-directed. They tended to be less interested in holistic planning and more interested in specific types of support or investment recommendations. The role of the RM has also changed. Since the beginning of the decade, the RM has become less of a confidant and more of a salesperson. This shift was most apparent in the brokerage model, where RMs began providing targeted...

Words: 902 - Pages: 4

Premium Essay

Why Memo Is Disliked by Manager

...1. Many managers dislike memos because they are disorganized, wordy and pointless. The most effective manger should not be trapped in memos 2. With the development of computer technology, the numbers of memos are increasing. 3. The reasons of sending memos are managerial, psychological and political. 4. The memo is the most useful tool for communicating large amounts of detailed information. Might be dangerous if written inappropriately. Sued or fired 5. The memo is the managerial tool of choice when you want to put out word to lots of people. Have to be worded with exquisite care, particularly for announcing bad news-turn down in business, a firing, promotion over rivals. Recipient are likely to pore over these bullentins.(rewrite) 6. Announcing executive’s dismissal become more concise for the fear of annocing too many contributions may cause people think the firing was unjustified. Good that companies have stopped firing people by memo 7. Psychological reason: Memos are overused by mangers because they feel uncomfortable, too shy to communicate in person or over the phone. 8. Mangers send memos for political reasons. carry political power 9. Convey more subtle political messages. If changed from informal to formal, need to find out what has changed. 10. Clear motive, not wordy, easy to understand 11. Well-defined purpose in mind: who is your audience? What do you want them to do? What information they want? Pick a format-some companies establish standardized...

Words: 370 - Pages: 2

Free Essay

Conflict of Interest Between Managers and Shareholders

...Corporate managers and shareholders can sometimes find themselves in a conflict of interest. The goal of being a good manager is being able to spot these potential conflicts and to remedy the situation before a serious problem arises. The biggest conflict between managers and shareholders is going to be money. Here is the most common scenario. A corporation is profitable. In fact, the corporation is more profitable than expected. Therefore, the corporation has a cash surplus, if you will. Managers would want this money as a financial bonus and the shareholders would want this money as a stock dividend. What to do? What to do? Mangers will argue that without their leadership and managerial ability, the corporation would not have been as profitable. The shareholders will argue that without their money, the corporation would not have been able to invest in its growth, and therefore, would not have reached that level of prosperity. Who should get the money? Another situation arises when the managers are also shareholders. This may lead a particular manager to push the opposite way of his/her position. For example, if a shareholder manager would get more money from a stock dividend than from a bonus, this shareholder manager might vote in favor of a stock dividend, not because he/she believes that stockholders should be rewarded for their investment, but because it will mean more money for that particular manager. What if only that one manger is a stock holder? Before...

Words: 406 - Pages: 2

Premium Essay

Product Manager

...A product manager investigates, selects, and develops products for an organization, performing the activities of product management. A product manager considers numerous factors such as intended demographic, the products offered by the competition, and how well the product fits with the company's business model. Generally, a product manager manages one or more tangible products. However, the term may be used to describe a person who manages intangible products, such as music, information, and services. A product manager's role in tangible goods industries is similar to a program director's role in service industries. Diverse interpretations regarding the role of the product manager are the norm. The product manager title is often used in many ways to describe drastically different duties and responsibilities. Even within the high-tech industry where product management is better defined, the product manager's job description varies widely among companies. This is due to tradition and intuitive interpretations by different individuals. In the financial services industry (banking, insurance etc.), product managers manage products (for example, credit card portfolios), their profit and loss, and also determine the business development strategy. In a Scrum environment, a Product Manager is also referred to as the Product Owner, and usually has the main role of representing the product to the customer.[1] Some of the responsibilities of the Product Owner include marketing of the...

Words: 279 - Pages: 2

Premium Essay

Hotel Manager

...Job profiles Hotel manager If you can manage staff, and you want to get into the hospitality industry, this job could be ideal for you. Hotel managers oversee all aspects of running a hotel, from housekeeping and general maintenance to budget management and marketing. In this job will need strong business skills. You will need to communicate well, with a sensitive and diplomatic approach. You will also need to think on your feet to solve problems quickly. To get into this job you could enter at a junior position and work your way up to management. Or you could do a higher education qualification in a subject like hospitality management and go straight in as a manager. An Apprenticeship in hospitality and catering can also be a route in. The work Large hotels may have a manager for each department, reporting to the general manager. In smaller hotels, the manager is more involved in the day-to-day running of the hotel, often dealing directly with guests. As a hotel manager, your tasks would typically include: * setting annual budgets * analysing financial information and statistics * setting business targets and marketing strategies * managing staff * organising building maintenance * making sure security is effective * dealing with customer complaints and comments * making sure the hotel follows regulations such as licensing laws * securing corporate bookings for entertainment and conference facilities. In larger hotels you will...

Words: 646 - Pages: 3

Free Essay

Football Manager Interview

...Football Manager is an enormously complex simulation. On a global level, the game tracks thousands of careers, ambitions and relationships, and on any given match day, weather, morale, skills and individual personal issues can contribute to moments of brilliance or abject failure. Talking to Sports Interactive’s director Miles Jacobson, I found that the simulation model is even more elaborate in some areas than I’d expected. Read on to find out about the game’s expanding narrative engine, how climate change is forcing the team to update the code that generates weather patterns, why the ugliest aspects of football have no place in FM and how a non-contract player’s family situation might prevent him from playing for your club. RPS: You’ve mentioned in previous interviews that you have a database of thousands of features to implement eventually. But do you have an overall vision of where the game is going to be in two or three years? Is there a shape that it’s taking? Jacobson: I tend to work two versions ahead. It used to be three but it’s two now because we’re managing to fit in a lot more each year, so there’s always an overall vision for the game. Whether that’s a year of revolution or of evolution – I think, certainly, the revolution years are going to be less and less because there’s so much in the game already that we’d rather look at evolving certain large chunks of the game each year. When you’re working on an annually iterative sports title that’s based on real life...

Words: 2911 - Pages: 12

Premium Essay

Top Qualities of a Project Manager

...Top 10 Qualities of a Project Manager What qualities are most important for a project leader to be effective? Over the past few years, the people at ESI International, world leaders in Project Management Training, have looked in to what makes an effective project leader. With the unique opportunity to ask some of the most talented project leaders in the world on their Project Leadership courses ESI have managed to collect a running tally on their responses. Below are the top 10 in rank order according to frequency listed. Inspires a Shared Vision An effective project leader is often described as having a vision of where to go and the ability to articulate it. Visionaries thrive on change and being able to draw new boundaries. It was once said that a leader is someone who "lifts us up, gives us a reason for being and gives the vision and spirit to change." Visionary leaders enable people to feel they have a real stake in the project. They empower people to experience the vision on their own. According to Bennis "They offer people opportunities to create their own vision, to explore what the vision will mean to their jobs and lives, and to envision their future as part of the vision for the organisation." (Bennis, 1997) Good Communicator The ability to communicate with people at all levels is almost always named as the second most important skill by project managers and team members. Project leadership calls for clear communication about goals, responsibility, performance...

Words: 1250 - Pages: 5

Premium Essay

Banana Republic General Manager Duties

...Banana Republic General Manager Duties 1. General Manager of Banana Republic Factory Store in Hershey, PA “This position leads BRFS Stores. The store produces an annual volume ranging from $2-20 million. In a standard location the GM is responsible for attracting, hiring, training and developing all levels of associates. They lead an average of 4 exempt and non-exempt positions. The GM is responsible for implementing the individual store strategy in a manner consistent with Gap Inc.'s Purpose, Values and Behaviors. The GM leads their team to meet net contribution goals, sales goals, customer service targets, and Operating and Human Resources objectives through motivation, inspiration and accountability. The GM is accountable for professional representation of our brands within their locale, understanding our competitors and their operations as well as driving excellent tenant and community relationships. Leadership and Employee Results (25%) • Holds Store team and self accountable to all Gap Inc. standards of performance and behavior. • Effectively sources, recruits, selects and on-boards all management and non-exempt store personnel. • Maintains optimal staffing levels to ensure business needs are obtained while promoting associate retention. • Promotes a high-quality store associate experience from on boarding through the associate life cycle. • Promotes maximum team and individual performance through consistent coaching and feedback. Drives in-store performance...

Words: 890 - Pages: 4