...14.5 MW MAI HYDROPOWER PROJECT FEASIBILITY STUDY Submitted by : Alish Bamanu Kumud Adhikari Akash mahat Bishal Shrestha Kumar Jeeva Tamang Submitted to : Yalam vaidya Kings College Table of Contents: SUMMARY ....................................................................................................................................... 1 SALIENT FEATURES ...................................................................................................................... 2 1. PROJECT BACKGROUND .................................................................................................... 4 2. THE PROJECT AREA ............................................................................................................ 4 3. REPORT INVESTIGATIONS ...................................................................................................... 5 4. BASIC STUDIES ................................................................................................................. ... 7 4.1 HYDROLOGY AND SEDIMENT STUDY .................................................................................... 7 4.2 POWER MARKET ................................................................................................................. 8 4.3 GOVERNMENT POLICY ......................................................................................................... 8 4.4 GEOLOGICAL AND GEOTECHNICAL STUDIES .............................
Words: 13718 - Pages: 55
...Project Team • University of Massachusetts • Springfield Technical Community College – Gary Masciadrelli – Megan Piccus – John Lafrancis – Zvi Rozen – Dave Cruise – Thomas Langevin – Tiefu Shao – Sundar Krishnamurty • PMRAP Why Cryogenic Machining? • Environmentally sound. • Higher production rates • Greater tool life • Hogouts What is Cryogenic Machining? • Using liquid nitrogen (ln2)as a coolant for tools. Liquid Nitrogen • Temperature -196 C -321 F • Colorless • Inert, doesn’t react with other materials • Non toxic • Readily vaporizes into gas. Keeping Tools Cool Hardness at Temperature Carbide tools at room temperature -1600 -1800 kg/mm^2 Carbide at 500 C – 1000 – 1100 kg/mm^2 Carbide at 900 C - 600 – 500 kg/mm^2 Tool wear at 70m/min @ feed of .20 mm/rev Project Icefly • Commercialized cryogenic process. – Collaboration between Air Products and Hardinge machine tool builder. In 2003. – Developed specifically for turning. – Team experimented with some milling. Summary • Tool life increases up to 40% in Titanium turning. • Tool life increases up to 130% in Hard turning. • Increase in MRR up to 290% in Hard turning. • Increase in MRR up to 60% in Titanium milling. • Tool life increases up to 260% in Titanium milling. Discussion Project Project deliverables 1, Design robust ln2 system to support milling processes. 2, Build prototype system. 3, Implement and debug system in STCC. 4, Optimize prototype to yield MRR of 25%. 5, Report out to industry. Project...
Words: 464 - Pages: 2
...PROJECT PROPOSAL GUIDE TRS3056 : PROJECT TRS3266 : MEDIA PROJECT TRS3284 : CREATIVE MULTIMEDIA PROJECT I TRS3334 : GRAPHIC DESIGN PROJECT 1 : MINOR PROJECT TRS3242 : VISUAL COMMUNICATION PROJECT I TRS3152 : PROJECT I Introduction Project is a compulsory part of the program structure in Bachelor in Information and Communication Technology, Bachelor in Creative Multimedia, Bachelor in Graphic Design, Bachelor in Game Design and Animation, Bachelor in Media Science and Bachelor in Visual Communication. It builds on the skills and knowledge learned in the first two and half years; to enable students to use these to demonstrate competence in the theory and practice based on their respective programs. Aims of Project The main aims of this project are: 1. To provide students with a realistic group experience in designing, implementing and documenting computer, multimedia, and graphics products in the form of applications, systems, design, etc. based on the needs of clients/stakeholders. 2. To let students apply their knowledge and skills in handling tasks with appropriate tools. 3. To provide a learning environment for students to independently manage their projects under supervision. 4. To build students’ ability to present and rationalize their work with confidence and logics. 5. To enable the students to delegate tasks and work as a team, and manage their project time and budget accordingly. General proposal format: 1. Paper Size Type Color 2. Type Face Font Size Title Font Spacing ...
Words: 1888 - Pages: 8
...Abstract that has been composed between 120 and 300 words in one paragraph including left and right margins, which should be 35 mm from the edges of the paper. This section should independently explain the subject, aims, research method and a summary of the article 's results. However it is not considered as a preface. Mentioning the references must be avoided in this section. The font to this section is (Times New Roman 11pt). The position of the title in this section is 120 mm from the top of the page or upper edge. Key words: minimum 4 and maximum 6 words which are separated by commas and placed in one line. (Times New Roman 11pt) 1. Introduction (Times New Roman 14pt in Bold) This guideline has been composed for author's use according to the standard methods of this conference. Compliance with these standards is mandatory for all authors. Please note that this document has been prepared in compliance with the mentioned regulations and can be used as a sample after removal of symptoms and descriptions of additional guidance. Writing papers requires word 2003 software in windows XP, and A4 paper is needed. In preparing the main text consider using the (Times New Roman 12pt) font and single line spacing. The text of the paper should be provided with margins of 35 mm from the upper edge and 25 mm from the bottom, right, and left edges....
Words: 1220 - Pages: 5
...Summary A solar powered pump is a pump running on electricity generated by photo voltaic. Unlike a normal pump, solar power pump being powered by the renewable electricity generated from the sun. Basically, a solar power pump consists of 4 parts which is the actual fluid pump, the controller, the engine which usually powered by electric motor and the energy source being powered by the sun. Dr. Mohd. Azree named this project as solar power pump and being assigned to all group leader of the class. The main objective of this project is to select a solar power pump by identifying whether the existing of pump is really ideal or need to be replaced. Actually, there is already had existing solar power pump build at BH building and in order to achieve our main objective, early research need to be done about the existing solar power pump which lead by Mr.Halil. Besides that, details calculation will be done in order to approve the existing pump suitable or not. Discussion about the project will also be done and some recommendation will be list out if the existing pump is not suitable. Lastly, I hope that this project will achieve the target and will bring benefit to the future research in solar power pump area. Abstract This project serves the purpose of being a validation to the existing solar powered water pumping system installed in Universiti Tenaga Nasional (UNITEN). The solar powered pump is an effort of UNITEN’s collaboration with an agency that are investing in providing...
Words: 2372 - Pages: 10
...than $80 000 US. More detailed variability testing on the other hand takes longer, is more expensive, and is used for throughput optimization for an existing or newly purchased mill. This paper shows that SAGDesignTM testing is excellent for new SAG plant design due to relatively low cost per test and the ability to do more testing for a limited budget on larger projects. It also briefly examines a way to develop proper geometallurgical ore hardness information on every block in the mine model, from the more detailed analysis data. Keywords: comminution tests, bond work indices, grinding mill design, database, ore hardness measurements, SAGDesign test, JK dropweight test INTRODUCTION The selection of SAG and ball milling sizes and configurations for new projects is complicated by the fact that grinding characterisation data is typically limited at best. The use of this grinding characterisation data by different grinding consultants, to specify totally different equipment and or configurations for the same project is becoming a major concern for the industry. This is highlighted by the fact that a number of new projects are following the concept of selecting the largest proven equipment available and then evaluating what the expected throughput will be using the largest SAG and ball mills available. The task therefore shifts from SAG mill design, to how many tonnes will the given SAG mill grind in one hour. When the difference between design methods used by different consultants...
Words: 3665 - Pages: 15
...Project Proposal Template Company Name Write Company Address Here City, State, Zip Code Phone, Fax Email: www.proposaltemplatestips.com Website: www.abc.com Project Proposal 2011/12 Project Name Business Area Program Name Project Sponsor: | | Author (Business): | | Author (MIS): | | DD/MM/YYYY a). Sample text ---------------------------------------------------------------------------------------------------------------- 1 b). Sample text ---------------------------------------------------------------------------------------------------------------- 4 c). Sample text ---------------------------------------------------------------------------------------------------------------- 6 b). Sample text ---------------------------------------------------------------------------------------------------------------- 8 d). Sample text ---------------------------------------------------------------------------------------------------------------- 10 e). Sample text ---------------------------------------------------------------------------------------------------------------- 14 f). Sample text ---------------------------------------------------------------------------------------------------------------- 15 g). Sample text ---------------------------------------------------------------------------------------------------------------- 19 h). Sample text ----------------------------------------------------------------------------------------------------------------...
Words: 775 - Pages: 4
...2006 - 2008 Strategic Plan Capital Increase Road Show May 2006 Disclaimer These materials are not intended for potential investors and do not constitute or form part of any offer to sell or issue, or invitation to purchase or subscribe for, or any solicitation or any offer to purchase or subscribe for any Ducati Securities, nor shall they form the basis of, or be relied on in connection with any contract or commitment to purchase Ducati Securities. Any recipient of this document considering a purchase of Ducati Securities in a rights issue following publication of an Italian prospectus in connection therewith is hereby reminded that any such purchase should be made solely on the basis of the information contained in such Italian prospectus. The information in these materials includes forward-looking statements, concerning in particular economic and financial trends, which have been made by the management and are based on current expectations and projections about future events. These forward-looking statements are subject to risks, uncertainties and assumptions. In light of this, the events described in the forward-looking statements may not occur. These materials are not being issued in the United States of America and should not be distributed to United States persons or publications with a general circulation in the United States. These materials are not an offer to sell or issue Ducati Securities in the United States. No public offering of Ducati Securities will be made...
Words: 5120 - Pages: 21
...Structural Engineer’s Pocket Book This Page Intentionally Left Blank Structural Engineer’s Pocket Book Fiona Cobb AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO SAN FRANCISCO SINGAPORE SYDNEY TOKYO Elsevier Butterworth-Heinemann Linacre House, Jordan Hill, Oxford OX2 8DP 200 Wheeler Rd, Burlington, MA 01803 First published 2004 Copyright ª 2004, Fiona Cobb. All rights reserved The right of Fiona Cobb to be identified as the author of this work has been asserted in accordance with the Copyright, Designs and Patents Act 1988 No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic means and whether or not transiently or incidentally to some other use of this publication) without the written permission of the copyright holder except in accordance with the provisions of the Copyright, Designs and Patents Act 1988 or under the terms of a licence issued by the Copyright Licensing Agency Ltd, 90 Tottenham Court Road, London, England W1T 4LP. Applications for the copyright holder’s written permission to reproduce any part of this publication should be addressed to the publisher Permissions may be sought directly from Elsevier’s Science and Technology Rights Department in Oxford, UK: phone: (þ44) (0) 1865 843830; fax: (þ44) (0) 1865 853333; e-mail: permissions@elsevier.co.uk. You may also complete your request on-line via the Elsevier homepage (http://www.elsevier.com), by selecting...
Words: 32006 - Pages: 129
...______________________________________________________________________________ Project Name NSA Capstone Project Charter ______________________________________________________________________________ Prepared By: [insert name] Date of Publication: [insert date] Revision History Version | Date | Author(s) | Revision Notes | 1.0 | | (Original author) | (original document) | | | | | | | | | | | | | | | | | Table of Contents Project Description 3 Project Objectives 3 Project Scope 4 In Scope: 4 Out of Scope: 4 Deliverables Produced: 4 Stakeholders: 5 Requirements: 5 Acceptance Criteria:Project Estimated Effort/Cost/Duration 5 Estimated Cost: 6 Estimated Effort Hours: 6 Estimated Duration: 6 Project Assumptions 7 Project Risks 7 Project Constraints 8 Project Dependencies 8 Project Approach 8 Project Organization 9 Communication Plan: 9 Project Guidelines: 9 Project Approvals 10 Project Description * On a large scale, summarize the case scenario or business case. Be specific in the background and why this project is necessary for the overall business value of the company * (Remove this comment section from the final document.) Project Objectives Objectives are statements that describe what this project will achieve and deliver. Objectives may be written using a technique called “SMART”: Specific, Measurable, Achievable, Realistic, and Timebound. To...
Words: 1740 - Pages: 7
... | | | |A CARE Solar Energy Grade reflects CARE’s opinion on the performance capability and financial strength of the graded entity. This | |grading does not constitute an audit by CARE. The grading is based on information provided by the company or obtained by CARE from | |sources it considers reliable. CARE does not guarantee the completeness or accuracy of the information on which the grading is based. A| |CARE grading is not a recommendation to use the services of the graded entity, or to invest in any project undertaken by it, or to lend| |to the entity or invest in any financial instrument issued by it. | | | |CARE has the right to revise grading as and when circumstances so warrant. CARE is not responsible for any errors and especially states| |that it has no financial liability whatsoever to the subscribers / users / transmitters / distributors of its grading. | |...
Words: 5080 - Pages: 21
...World Bank & Government of The Netherlands funded Training module # WQ - 11 The chemistry of dissolved oxygen measurement New Delhi, May 1999 CSMRS Building, 4th Floor, Olof Palme Marg, Hauz Khas, New Delhi – 11 00 16 India Tel: 68 61 681 / 84 Fax: (+ 91 11) 68 61 685 E-Mail: dhvdelft@del2.vsnl.net.in DHV Consultants BV & DELFT HYDRAULICS with HALCROW, TAHAL, CES, ORG & JPS Table of contents 1 2 3 4 5 6 7 8 Module context Module profile Session plan Overhead/flipchart master Evaluation sheets Handout Additional handout Main text 2 3 4 5 29 31 38 39 HP Training Module File: “ 11 Chemistry of DO measurement.doc” Version 05/11/02 Page 1 1 Module context This module deals with significance and chemistry of dissolved oxygen measurement. Modules in which prior training is required to complete this module successfully and other available, related modules in this category are listed in the table below. While designing a training course, the relationship between this module and the others, would be maintained by keeping them close together in the syllabus and place them in a logical sequence. The actual selection of the topics and the depth of training would, of course, depend on the training needs of the participants, i.e. their knowledge level and skills performance upon the start of the course. No. 1 Module title Basic water quality concepts Basic chemistry concepts Code WQ - 01 • • • • • 3 How to prepare standard solutions WQ - 04 • • • 2 WQ - 02 ...
Words: 4977 - Pages: 20
...PRELIMINARY FEASIBILITY PLANT DESIGN REPORT OF THE ORANGE JUICE PRODUCTION Yrd.Doc. Nur Dirim 05-04-6367 Gözde Bilen 05-04-6402 Güngör Çevik 05-04-6433 Yasemin Eke 05-04-6458 Türker Çavuş 05-04-6481 Gökhan Aydemir 05-99-2796 Filiz Biltekin Koyuncu Bornova, IZMIR 2000 1 CONTENTS SUMMARY INTRODUCTION 1. SUMMARY OF PROJECT 1.1. Name Of Project 1.2. Plant Location 1.3. Capacity 1.4. Raw Material 1.5. Production Technology 2. DEFINITION OF PROJECT 2.1 Aim of The Project 2.2 Marketing Research of Orange Juice 2.3 Raw Material 2.3.1. Physical Properties of Orange and Orange Tree 2.3.2. Chemical Properties of Orange 2.3.3. Varieties of orange 2.3.3.1. Persian orange 2.3.3.2. Navel orange 2.3.3.3. Dream Navel 2.3.3.4. Valencia orange 2.3.3.5. Blood orange 2.3.3.6. Cara Cara 2.3.3.7. Hamlin 2.3.3.8. Jaffa 2.3.3.9. Moro 2.3.3.10. Moro Tarocco 2.3.3.11. Domestic Oranges 2.4 Techniques of process 2.4.1. Flow Sheet Diagram 2.4.1.1. Orange Uploading 2.4.1.2. Storage 2.4.1.3. Washing 2.4.1.4. Brushed Washing 2.4.1.5. Sorting 2.4.1.6. Extraction 2.4.1.7. Finisher 2 2.4.1.8. Decanter 2.4.1.9. Deaerotion 2.4.1.10. Pasteurization 2.4.1.11. Cooling 2.4.1.12. Homogenization 2.4.1.13. Filling 2.4.2. Equipments 2.4.2.1.Slope Regulated Elevator 2.4.2.2.Washing Unit 2.4.2.3. Sorting Unit 2.4.2.4. FMC Extractor 2.4.2.5. Finisher 2.4.2.6. Decanter 2.4.2.7. Vacuum Deaerator 2.4.2.8. Pasteurizer 2.4.2.9. Cooling Unit 2.4.2.10...
Words: 10566 - Pages: 43
...E-Leader Croatia 2011 Case Studies in Channels of Distribution Donald K. Hsu, PhD Associate Professor Division of Business Administration Dominican College Orangeburg, New York, USA Abstract Case studies were employed as research tools, for undergraduate and MBA students for 25+ years. The International Management course was taught in two classes at an undergraduate Business program. Channel of Distribution course was given at a MBA program. Real-world examples were utilized and applied in class whenever applicable. Students did final projects individually or in a team, by employing case studies via library and internet search. Class evaluations indicated that the case studies enhanced significantly their overall learning experience. Students rated the courses good to excellent. This paper gave the summary. Keyword: Case Studies, In-Class Team Assignment, Final Projects, International Management and Channels of Distribution Harvard University, Cranfield University (UK) and many other research institutions published case studies for 25 years. International Management and Channels Distribution were taught in an undergraduate business program and a MBA program respectively. Job market is very good. A quick search on Indeed (2011) yielded 5,850 jobs for international manager and 1,160 jobs for channels distribution. This search was done for Manhattan zip code 10001, and within a twenty-mile radius. In the down economy, managers and distributors are still...
Words: 3470 - Pages: 14
...Manual Saliran Mesra Alam (MSMA) Pusat Penyelidikan Kejuruteraan Sungai dan Saliran Bandar (REDAC) Kampus Kejuruteraan, Universiti Sains Malaysia Seri Ampangan, 14300 Nibong Tebal, Pulau Pinang. Tel: 04-5941035 Fax: 04-5941036 ii Concept and Design Requirement of MSMA 1.0 Design Standard Urban Stormwater Management Manual for Malaysia (Manual Saliran Mesra Alam Malaysia, MSMA) 2.0 General Urbanization results in the growth and spread of impervious areas and a diversification of urban landuse practice with respects to the hydrologic and environmental terms. Landuse changes from rural to urban industrial areas cause local runoff impacts on receiving water flow, quality, and ecology. Apart from erosion and sedimentation problems associated with development, it has become increasingly apparent that stormwater runoff contributes to receiving waters a significant part of total loads of such pollutants as nutrients (including phosphorus and nitrogen), heavy metals, oil and grease, bacteria, etc. New, comprehensive, and integrated SWM strategies are now needed to be in line with the government’s drive to archive a sustainable developed nation status in the early 21st century. Such new strategies will incorporate interalia, runoff source control, management and delayed disposal on a catchment wide, proactive, and multi-functional basis. This should result in flood reduction, water quality improvement, and ecological enhancement in downstream receiving waters...
Words: 33076 - Pages: 133
