...Corey Young Monday The first part of this video was talking about the history of the operating systems. The Microsoft OS were DOS that had a GUI interface, after that you had NT, 9x, 2000, XP, Vista which in my opinion was terrible, server 2003 and 2008. There are also other OS that have been out Unix and Linux is what Macintosh are built from and then you also have Mac OS X. Video 3.02 was talking about installing new hard ware, creating partitions and formatting partitions, and installing OS systems. Before you install an OS system after installing a new hard drive you need to create and format a partition which will be an c partitions. There are two types of partitions which are primary and extended. You can only create one of each with the FAT file system. The NTFS you can create four primary partitions or three primaries and one extended. In creating partitions you need to know the order they are created and deleted. The orders to create partitions are first primary then extended and logical. To delete a partition you will simple reverse the order. Video 3.03 is about comparing active, system and boot partitions. After creating partitions you need to mark one active which usually contains the boot file so you can start up the OS. The system and the boot partitions are part of this system. The system partitions contain boot files which contains the operating system which boots up the OS. The boot partition contains system files which contain the OS files. So the...
Words: 279 - Pages: 2
...Video Summary 6 Video 3.13 Summary – User State Migration Tool — This video covers the User State Migration Tool (USMT) which transfers all the settings from your old computer to your new computer. The USMT is found on a domain; you can also use a tool called Files and Settings Transfer Wizard—both of these applications are found in the system tools directory. These tools make using your new computer much like your previous computer with less pain. This helps the company/department become more efficient and would in effect be less downtime and thus less painful than the old way. Topics— * User State Migration Tool (USMT) * Files and Settings Transfer Wizard Terms— * User State Migration Tool (USMT) * Is a Microsoft command line utility program intended to allow advanced users, comfortable with Scripting language, to transfer files and settings between PCs. This task is also performed by Windows Easy Transfer, recommended for general users. * Files and Settings Transfer Wizard * Is a file transfer and backup program which allows backing up or transferring user files and settings between computers. Summary— I personally never knew these programs/applications existed. Now that I know, I can use these instead of burning files to DVD/CD then transferring the information in that archaic method. And all this time I thought it was a pain to work in a windows environment. However, I still don’t understand how the new and old PCs are to be connected to...
Words: 687 - Pages: 3
...Nt1110 Unit 2 Analysis 1 Computer Shopper Unit 2 Analysis 1: Computer Shopper Clinton Kline Computer Structure and Logic NT1110 Abstract A table of four different computers with their differences in hard drive space, RAM, and processor speed. Next is a summary of three professions and what type of computer would be best for their line of work. Computer Shopper Type of Computer Hard Drive Memory CPU Price Acer Aspire Pentium All-In-One Touchscreen | 1TB Hard Drive | 4GB RAM | Pentium21270U1.90GHz | $649.99 | HP Business Desktop Pro | 500GB Hard Drive | 2GB RAM | Pentium G860 3GHz | $469.99 | MSI G270 Gaming Notebook | 500GB Hard Drive | 12GB RAM | Intel Core i7 2.40GHz | $1549.99 | Lenova Thinkpad X Series X131e | 320GB Hard Drive | 2GB RAM | AMD E1-Series 1.4GHz | $349.99 | Computers being used in any profession must be fast or big enough to meet the requirements of its users. An author wouldn’t need very much in the way of power or storage. A cheap all-in-one computer or basic laptop would be fine for their needs. When it comes to video game developers, they need computers with lots of space and lots of power along with a high end video card. They will most likely have ordered a custom built computer with terabytes of space and the newest high end processor. CAD operators also need lots of space and power for the work they do. A computer with a terabyte of space and a high end processor along with six to eight gigabytes of RAM should be...
Words: 272 - Pages: 2
...Clinton Kline Computer Structure and Logic NT1110 Abstract A table of four different computers with their differences in hard drive space, RAM, and processor speed. Next is a summary of three professions and what type of computer would be best for their line of work. Computer Shopper Type of Computer Hard Drive Memory CPU Price Acer Aspire Pentium All-In-One Touchscreen | 1TB Hard Drive | 4GB RAM | Pentium21270U1.90GHz | $649.99 | HP Business Desktop Pro | 500GB Hard Drive | 2GB RAM | Pentium G860 3GHz | $469.99 | MSI G270 Gaming Notebook | 500GB Hard Drive | 12GB RAM | Intel Core i7 2.40GHz | $1549.99 | Lenova Thinkpad X Series X131e | 320GB Hard Drive | 2GB RAM | AMD E1-Series 1.4GHz | $349.99 | Computers being used in any profession must be fast or big enough to meet the requirements of its users. An author wouldn’t need very much in the way of power or storage. A cheap all-in-one computer or basic laptop would be fine for their needs. When it comes to video game developers, they need computers with lots of space and lots of power along with a high end video card. They will most likely have ordered a custom built computer with terabytes of space and the newest high end processor. CAD operators also need lots of space and power for the work they do. A computer with a terabyte of space and a high end processor along with six to eight gigabytes of RAM should be fine. References Newegg.com. Retrieved January 6, 2014, From...
Words: 265 - Pages: 2
...Unit 5 Assignment 1: Video Summary NT1110 There are two major manufactures we use in today’s market which are Intel and AMD. There are some minor competitions but don’t stay on the market for long. The system bus for the CPU is also known as the Front-side bus as it inserts the CPU and has a 64 bit data pass. In the CPU theirs a controller that controls communication between the motherboard and other components with the CPU. The ALU is responsible for performing complex calculations. Communications between the controllers and the ALU’s uses a 32 bit wide internal data bus. A processor is usually measured in GHz. A system Bus is usually measured in MHz and has limiting factors of speed. The multiplier is the ratio between processor and the System bus. The system bus speed x multiplier equals the processor speed. CPU manufactures have come up with different ways to make the CPU work faster. Two multi-processing requires multiple processors (In other words your system must be designed to support more than one CPU on a single motherboard). Dual Core Processors have been recently developed, that means incorporating multiple processors with multiple ALU’s inside a CPU. These ALU’s process their information individually. There’s two cache memory’s which are SRAM and DRAM. SRAM is also called Static RAM, it is faster and more expensive then DRAM, it holds memory without being refreshed and DRAM must be refreshed. There are three types of RAM which are L1 cache, L2 cache, and L3 cache...
Words: 644 - Pages: 3
...Alejandro Pena NT1110 Unit 3: Assignment 1: Video Summary 1 Clip 1.07 Summary: In conclusion ports and connectors I learned how to identify the different type of ports and the connectors which are used for those ports. Also know which devices use those particular ports and connectors. For ports there are serial, parallel, and game ports. For devices there are mouse’s and keyboards. There is also a NIC (network interface card). To connect to video there is VGI, DVI and S-Video. New port and connectors are the USB1 and USB2 which come with connector A and connector B. There are also the SCSI connectors a narrow 50 pin and a wide 68 pin. IEEE 1394 uses serial communication and will replace SCSI in the future. Lastly for multimedia we have the earphones, microphone and speaker jacks which come color coded. * * Serial, Parallel, Game ports | * USB(Universal Serial Bus) | * Mouse and Keyboard | * SCSI | * NIC( Network Interface Card) | * IEEE 1394 | * Modem | * Multimedia | * Video | | * Serial port: a socket that can be used for connecting devices that send data one bit at a time; often used for connecting the mouse or a modem. * Parallel port: a socket that can be used for connecting devices that send and receive data at more than one bit at a time; often used for connecting printers. * USB: an external serial bus interface standard for connecting peripheral devices to a computer. Up to 127 devices simultaneously connected...
Words: 810 - Pages: 4
...NT1110 Unit 8: Video Summary 6 Hardware Configurations I watched 4 videos on Hardware Configuration. They were, in order, Device Manager, Driver Signing, Hardware Profile and Regional and Language Options. The 1st, Device Manager went over how to manage all your hardware devices. It covers how they are configured, their settings, drivers and resources. It’s found in System Properties. After this, was Driver Signing which is Microsoft’s way of confirming that its devices and drivers have been tested and are compatible with Microsoft’s operating system. Each driver and device is checked off in the System Properties verifying its authenticity. There is also driving signing options for hardware installations with software that is not Windows. They are Ignore, which means install anyway. Warn, which means the system will prompt you to choose and Block, which blocks unsigned software. The next video was Hardware Profile. This is a list of devices enabled at the start of a computer and loading into the operating system. It too is found in System Properties. It covered how to change your hardware profile. It’s usually used for laptops. We can change what devices our system uses 1st for instance, changing the network connections when traveling. The last video was Regional and Language Options. This is found on the Control Panel. Here, you can set language or choose how you want your numbers, currency, time and dates displayed. You can go to Customize to make changes. Topics ...
Words: 498 - Pages: 2
...David Tcruz, Deanna Guzman, Darrell Pierce, Charles Wright, Alberto Rodriguez NT1110 – Nov 2nd, 2015 U8_A1 Video Summary 6 – Windows Operating System features The features of the Windows operating system will start with the Control Panel. This is where any changes to the system and configurations are allowed. There’s also the Security Center, where you can monitor the status of the security features including firewall setting and internet security settings. The performance maintenance can also be found under the Control Panel Administrative Tools. Under this tab, you can view Services, Local Security Policy, and Event Viewer. With the Local Security Policy, the user is allowed to change the password policy, account lockout policy, and audit policy. Under the Password Policy, the user will be able to change the password settings such as length, upper or lower case letters, and password history. The account lockout policy is where the minutes of lockout, the number of failed logon attempts, and lockout account counter. Also under the Local Security Policy, the user can look at the Directory service access, privilege use, policy change, and system events. Also under the Local Security Policy, The Security setting marks every event as success, failure, and no auditing. This will generate an event when it succeeds, fails, or no event is generated. This is also the area where the user can determine who can access the computer, which gives more control to the user. The event viewer...
Words: 558 - Pages: 3
...-Muslam Gore -NT1110 computer structure and Logic Unit 6 Memory Cost & Video Summary Readings: in this Chapter of Studies 1. Your OS will use the hard drive as a "swap file" or virtual memory, if your PC runs out of RAM while you are working away. Using your hard drive as memory causes a serious performance hit, as hard drives are slower than RAM. You must have enough memory, adding more does not help if you are not doing anything that needs more memory. Today, a modern PC and a modern OS need about 4 gigs to achieve this for most standard users. You want enough RAM so the OS doesn't start using the hard drive as memory. 2. The user with the three 200 GB hard disks has the advantage, because he can utilize all three disks simultaneously, while the other one can only use that single disk. The user with the three disks will probably be able to do more, faster. 3. A typical home computer user would require RAID technology if they use their computer as a home office and have data that is invaluable or irreplaceable. The option is becoming more popular because of the speed increase, and or data reliability you achieve when you set RAID up. A typical business user would use RAID to provide data redundancy, fault tolerance, increased capacity, and increased performance. Data redundancy protects the data from hard drive failures. This benefit is good for companies or individuals that have critical or important data to protect, or just anyone that's paranoid...
Words: 595 - Pages: 3
...Claro Garcia NT1110 CS & L April 9, 2014 Chapter 3 Summary In the world of computers, input/output (I/O) devices are utilized to enhance, configure and control data transfer between the computer and external devices in a variety of ways. These devices use ‘ports’ to connect to either internal or external hardware to and from the computer. The ports are then linked to copper circuits and memory that communicate to the computer CPU, RAM and ports. This enables data transfer between these I/O devices and the computer. Nowadays, the Universal Serial Bus (USB) port is considered to be the most important I/O port among all other I/O ports because it has replaced PS/2 (mini DIN) mouse and keyboard, serial (COM), and parallel (LPT) ports in recent computer systems and providing greater speed. A recent computer desktop system has at least four USB ports and can support up to eight front-and-rear mounted USB ports. The three standard types of USB ports are (1) USB 1.1, (2) USB 2.0 a.k.a Hi-Speed USB -and (3) USB 3.0 a.k.a Superspeed USB and use either Series A a.k.a Type A or Series B a.k.a Type B types of connectors. Adding more USB ports can be done by using motherboard connectors for USB header cables, hubs and add-on cards. Serial (COM) I/O ports also known as RS-232 ports are used for external modems, serial mouse, plotters, label printers, serial printers, PDA docking stations, digital cameras and PC-to-PC connections used by file transfer programs such as DirectCable...
Words: 1168 - Pages: 5
...Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments Introduction to Networking Syllabus Where Does This Course Belong? This course is required for the associate program in Network System Administration and the associate program in Electrical Engineering Technology. The following diagrams demonstrate how this course fits in each program. Associate Program in Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110 Computer Structure and Logic NT1210 Introduction to Networking NT1310 Physical Networking CO2520 Communications ...
Words: 4400 - Pages: 18
...Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1110 Computer Structure and Logic or equivalent Course Description: This course serves as a foundation for the study of computer networking technologies. Concepts in data communications, such as signaling, coding and decoding, multiplexing, circuit switching and packet switching, OSI and TCP/IP models, LAN/WAN protocols, network devices and their functions, topologies and capabilities are discussed. Industry standards and the development of networking technologies are surveyed in conjunction with a basic awareness of software and hardware components used in typical networking and internetworking environments Introduction to Networking Syllabus Where Does This Course Belong? This course is required for the associate program in Network System Administration and the associate program in Electrical Engineering Technology. The following diagrams demonstrate how this course fits in each program. Associate Program in Network Systems Administration NT2799 NSA Capstone Project NT2580 Introduction to Information Security NT2670 Email and Web Services NT2640 IP Networking PT2520 Database Concepts NT1330 Client-Server Networking II NT1230 Client-Server Networking I NT1430 Linux Networking PT1420 Introduction to Programming NT1110 Computer Structure and Logic NT1210 Introduction to Networking NT1310 Physical Networking CO2520 Communications ...
Words: 4400 - Pages: 18
...ITT Technical Institute NT1310 Physical Networking Student Course Package Bring this document with you each week Students are required to complete each assignment and lab in this course package on time whether or not they are in class. Late penalties will be assessed for any assignments or labs handed in past the due date. The student is responsible for replacement of the package if lost. Table of Contents Syllabus 2 Student Professional Experience 19 Graded Assignments and Exercises 23 Labs 47 Documenting your Student Professional Experience 57 ITT Technical Institute NT1310 Physical Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1210 Introduction to Networking or equivalent Course Description: This course examines industry standards and practices involving the physical components of networking technologies (such as wiring standards and practices, various media and interconnection components), networking devices and their specifications and functions. Students will practice designing physical network solutions based on appropriate capacity planning and implementing various installation, testing and troubleshooting techniques for a computer network. Where Does This Course Belong? | | | NT2799 | | | | | | | | NSA Capstone | | | | | | | Project | | | | | NT2580...
Words: 10839 - Pages: 44
