...1. Capture driver’s image while driving continuously by using inbuilt camera of Smartphone. 2. OpenCV is used to track facial expression. 3. Track Driver’s face and expression including eyes and mouth, movement(head rotation),stress recognition tracking 4. If eyes are closed for some fraction of time, then alert driver by sounding the alarm device or using various different alerts. 5. If mouth is open for more time then yawning is detected and alert is raised. 6. Driver’s head rotation is used to detect distraction, system will generate alert after driver distraction and inattention detection. 7. If stress is detected from driver’s facial expression and speech recognition then alert is raised and system autodials emergency numbers. In this project we are going to develop and integrate various functionalities into single application. These functionalities are: 1. Driver fatigue detection by • Eye Tracking • Mouth Tracking • Speech recognition • Stress recognition • Head Rotation recognition(Gaze Tracking) 2. Traffic sign detection 3. Road traffic detection(Traffic Jam) 1. Eye Tracking: Eye tracking helps to detect whether driver is sleepy by detecting open and close state of eyes and blinking of eyes. It considers all constraint like wearing glasses, brightness and dark light conditions while detecting blinking of eyes. If closed eyes are detected for some given fraction of time then system will raise an alert. 2. Mouth Tracking: It tracks drowsy conditions i.e. yawning...
Words: 485 - Pages: 2
... Whispering- requires the vocal folds to come together but not completely so there is a space between the arytenoid cartilages (432) Attack: The beginning of phonation by the bringing together (adduction) of the vocal folds (165) 1.Simultaneous Vocal Attacks- When the adduction of the vocal folds and the use of air from the respiratory system happen at the same time. (165) 2. Breathy Vocal Attack- When the use of air from the respiratory system happens before the adduction of the vocal folds (165) 3. Glottal Attack- When the vocal fold adduct before the air can be released from the vocal folds (165) Termination of phonation- Happens when the vocal folds abduct and the flow of air is stopped (147) Sustaining Phonation- Happens when the vocal folds say adducted allowing the air to flow through (168) Vibration how it's governed: Vibration is governed by elasticity of the vocal folds, the stiffness of the vocal folds and the quality of the vocal folds (160) Frequency- Determined by the number of times a vibration cycle is repeated in a specific amount of time (162) Period- A measure of vibration from a start time to a finish time (162) Opening Phase- The phase where the vocal folds are beginning to open (180) Closing Phase- The phase where the vocal folds are beginning to close but not completely (180) Closed Phase- The phase where the vocal folds are closed and there is no air escaping (180) Myoelastic theory of phonation- The elasticity of the vocal folds allows...
Words: 389 - Pages: 2
...Exercise One Nt1310 Week 1 In: Computers and Technology Exercise One Nt1310 Week 1 NT1310:Week 1 Telecommunications By: Kenneth Martin You are an IT Network Specialist and are required to develop the design of the company’s telephone system for its new building which will begin construction in a few months. In order to get a background which will help when developing the new system, your supervisor asked you to research the current Plain Old Telephone Service (POTS) currently used by the company. You must research the system components and report back to your supervisor , the Telecommunications Manager, within a week. 1. Describe a local land line phone system based on the following Landline Telephone Components: a. Local Loop a local loop is the wired connection from a telephone company's central office in a locality to its customers' telephones at homes and businesses. This connection is usually on a pair of copper wires called twisted pair. The system was originally designed for voice transmission only using analog transmission technology on a single voice channel. Today, your computer's modem makes the conversion between analog signals and digital signals. With Integrated Services Digital Network (ISDN) or Digital Subscriber Line (DSL), the local loop can carry digital signals directly and at a much higher bandwidth than they do for voice only. b. Central Office In telephone communication in the United States, a central office (CO) is an office in a locality...
Words: 496 - Pages: 2
...ITT Technical Institute NT1310 Physical Networking Student Course Package Bring this document with you each week Students are required to complete each assignment and lab in this course package on time whether or not they are in class. Late penalties will be assessed for any assignments or labs handed in past the due date. The student is responsible for replacement of the package if lost. Table of Contents Syllabus 2 Student Professional Experience 19 Graded Assignments and Exercises 23 Labs 47 Documenting your Student Professional Experience 57 ITT Technical Institute NT1310 Physical Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1210 Introduction to Networking or equivalent Course Description: This course examines industry standards and practices involving the physical components of networking technologies (such as wiring standards and practices, various media and interconnection components), networking devices and their specifications and functions. Students will practice designing physical network solutions based on appropriate capacity planning and implementing various installation, testing and troubleshooting techniques for a computer network. Where Does This Course Belong? | | | NT2799 | | | | | | | | NSA Capstone | | | | | | | Project | | | | | NT2580...
Words: 10839 - Pages: 44
...ITT TECHNICAL INSTITUTE NT1310 Physical Networking GRADED ASSIGNMENTS ------------------------------------------------- Student Professional Experience Project NSA SPE Project 1 (to be completed by the end of NT1310): Install, Configure, Test, Maintain and/or Document the Worksite Local Area Network and Its Components Purpose The purpose of the Student Professional Experience (SPE) project is to provide you an opportunity for work experience in your field or in a related field to add to your résumé. You may have an opportunity to serve your community or work for a local employer for a project that will take between 20 and 30 hours. Project Logistics Career Services will identify an employer with needs in the following areas: Network related tasks (mostly confined to the LAN and Microsoft Windows Server 2008 environments) Students are expected to practice various skills discussed in all the technical courses in Quarters 1 through 3 of the NSA program at an employer’s site on network related tasks (more confined to the LAN and Microsoft Windows Networking with Server 2008 environments) that would involve installation, configuration, testing, maintenance and documentation of the worksite network and its components, and to properly document the technical information in all involved activities. Such documentation will be used as the source material for Items 2 and 3 defined in the Deliverables section of this document. Possible example projects could...
Words: 6762 - Pages: 28
...Sole's Blog SOLVE YOUR IT PROBLEMS FASTER, SAVE YOUR FEET AND GET MORE TIME ON YOUTUBE! * HOME * * ABOUT SOLE VIKTOR * * USEFULL LINKS « How to publish a website with both Anonymous and Forms Based Authentication in ISA 2006 How to configure ISA 2006 with FBA for OWA and NTLM for Outlook Anywhere and Autodiscover in Exchange 2007 » How to place FSMO and Global Catalog roles in Active Directory During installation of Active Directory on a Windows Server 2000/2003/2008 all FSMO roles will automatically be installed on the first server. But Best Practice dictates to move some of theese Flexible Single Master of Operation (FSMO) roles to seperate servers. If you only have one domain controller (not recommended), there is nothing to do since all roles must be on this server, but if you have multiple servers you should move some of theese roles on to more servers. It is also important to be aware of what servers are Global Catalog servers, especially if you have more than one domain and even if only one domain, they will be prefered by applications like Exchange server. It is recommended to place the forest roles on one Domain Controller (DC) and the domain roles on another server. If not all Domain Controllers are Global Catalog servers, it is also important to place the infrastructure master on a server that is NOT a Global Catalog server. Recommended Best Practice setup of FSMO roles. Domain Controller #1 Place the two forest roles on this server. * Schema Master...
Words: 10360 - Pages: 42
