Identify process flow structure: assembly line production is done as there is production of discrete parts moving from workstation to workstation at a controlled rate, following the sequence needed to build the product. When other processes are employed in a line fashion along with assembly, it is commonly referred to as a production line.
Production is done in the chain department (assembly lines) and for each assembly line there is a chain inspector to make sure that no errors are made. After that the product is moved to the final checking department after cleaning through the brush. After final checking, product is moved to the packing department who do the packing size wise and as per contract.
Wastes are sold to the small producers.
If any problem occurs in any department then it is written on the card and sends back to the department. For correction and alteration each production line has 2 to 3 persons.
Process selection: assembly process would be used.
Manufacturing process flow design and its rationale and suitability for the organization: manufacturing process flow design is a method to evaluate the specific processes that raw materials, parts, and subassemblies follow as they move through the plant. The most common production management tools used in planning and designing the process flow are assembly drawings, assembly charts, route sheets and flow process charts.

Gap occurred when materials are not arranged. Materials sometimes could not reach on time.
After pattern samples are made to fulfill the requirements of the customers, then the production process