...[PROJECT STATUS REPORT] Rev. 1.0, 25/10/2013 Company here Bi-weekly Project Status Report GENERAL INFORMATION Project Name Project Manager Project ID Number Prepared by Project Sponsor Reporting Period Ending Date [DD/MM/YYYY] Report Number Section I TASKS/MILESTONES COMPLETED This section only includes tasks/milestones that are completed since last reporting period (Report Number CT-BWR-09, dated 23/05/2012). [Insert rows as needed] Description of Task/Milestone Baseline Finish Date [DD/MM/YYYY] Current Status* Actual Finish Date [DD/MM/YYYY] Remarks [PROJECT STATUS REPORT] Rev. 1.0, 25/10/2013 Section II Company here ISSUES IDENTIFIED [Insert rows as needed] Description of Issue Reported by Reported Date [DD/MM/YYYY] Estimated Resolution Date [DD/MM/YYYY] Remarks Section III PROJECT CHANGES [Insert rows as needed] Change Reques t ID No. Description of Change Change Requestor Approval Status Action Steps Actual Resolution Date [DD/MM/YYYY] Current Change Status* [PROJECT STATUS REPORT] Rev. 1.0, 25/10/2013 Section IV Company here UPCOMING TASKS/MILESTONES This section only includes tasks/milestones that are to be completed by next reporting period, ending 06/06/2012. [Insert rows as needed] Description of Task/Milestone Baseline Finish Date [DD/MM/YYYY] Current Status* Remarks *Key: This column should be populated with the task/milestone current status. Valid options...
Words: 386 - Pages: 2
...Costco Wholesale Corporation: Annual Report 2012 Costco’s Annual Report 2012 opens with a description of the corporation’s history of ownership, its subsidiaries, and locations. It also identifies that the company is traded on the NASDAQ under the symbol “COST” (Costco Wholesale Corporation). At the very beginning of the Costco’s 2012 annual report, a financial highlights page which bar-charts depict its performance over five progressive years from 2008 to 2012 in the following categories: Warehouses in Operation; Net Sales; Net Income; Comparable Sales Growth; Membership; Average Sales per Warehouse; and Selling, General and Administrative Expenses which were clearly marked with any variances to the data being compared. The bar charts provided a basis for accounting analysis by depicting intracompany basis of comparison from one year to the next, and using a horizontal analysis approach. An “intracompany” basis of analysis compares an item or financial relationship within a company; a “horizontal analysis,” also called “trend analysis” is a way of evaluating a series of financial statement data over a period of time, with a purpose of determining changes in a company’s financial performance (Weygandt, Kimmel, & Kieso, 2009). Utilizing a means of comparative analysis is essential and significant in analyzing a company’s solvency, liquidity, and profitability. It assists a company’s internal and external stakeholders; its customers, employees; or the government to assess...
Words: 952 - Pages: 4
...Assignment 1: Annual Report Project Due Week 8 and worth 20 points The purpose of a corporate annual report is to communicate to stockholders and other interested parties its financial statements. The annual report is a summary of the corporation’s operations over the previous 12-month time period and states the corporation’s plans for the future. Many annual reports are created to resemble a corporate brochure, using lots of pictures, color, charts, and graphs. Despite the fancy look, the main purpose of the report is to provide the year’s financial data, which comes from the corporation’s accounting system. Instructions: Obtain a current annual report for any U.S. company you are interested in analyzing. Each student must choose a different company to analyze; therefore students must receive approval of the selected company from the professor by Week 5 of the class. Write a 2-3 page paper in which you: 1. Identify and explain the main sections of the annual report. 2. Discuss the key factors that influenced the company’s financial performance during the year. 3. Discuss the primary assets held by the company. 4. Explain how management characterizes the internal control environment of the company. Your assignment must: * Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; references must follow APA or school-specific format. Check with your professor for any additional instructions. *...
Words: 971 - Pages: 4
...GEORGE WASHGON UNIVERISTY Tacheng Wind Power Plant Project Plan School of Engineering & Applied Science Team Member: Shiyue Jiang, Ruiyu Liu, Kufre Essiet, Juan Wang, Mengpei Jia Project Report Table of Content 1. General description of project activity ..................................................................................... 4 1.1 Title of the project ............................................................................................................. 4 1.2 Description of the project ................................................................................................... 4 1.3 Detail of physical location ................................................................................................. 5 2. Understanding of scope of work .............................................................................................. 6 2.1 Scope of work ................................................................................................................... 6 3. Technical Approach ................................................................................................................ 7 3.1 Basic Construction part ...................................................................................................... 7 3.2 Basic Construction for fan ................................................................................................. 9 3.3 Fan Installation .......................................................
Words: 6914 - Pages: 28
...Project Meetings Report by Ibrahim Emad Farrag Supervised by Dr. Mohamed Hussein Abstract Meetings are a vehicle for exchanging information, confirming progress, creatively developing deliverables or solutions, making decisions, and growing as a team. They provide a means for collaborative thinking, discussion, and deliberation that is invaluable in getting project work done. Unfortunately, we seem to have a dysfunctional relationship with meetings. We need them, but hate them. However Through intentionally planning, using facilitative techniques, and managing group dynamics, we can transform useless meeting time into productive results. This facilitated collaboration helps people work better together to create the outcomes and project deliverables you need in a focused period of time. This report is going to first indentify the types of project meetings then we will look into how to make a meeting more productive and efficient, last we will study the meetings in each phase of a project. Table of Contents Introduction 1 Profile of a Project Meeting facilitator 2 When to Meet—and When Not to Meet 4 Project Meeting Characteristics 5 Types of Project Meetings 6 Information Exchange Meetings 7 Creative Development Meetings 7 Decision-Making Meetings 8 Coaching Meetings 8 Project Meeting Structure 9 Meeting Formality 9 Meeting Frequency 9 Tools for Keeping Meetings on Target 10 Tools for Meeting Preparation 10 The Meeting Preparation...
Words: 8306 - Pages: 34
...| MANAV RACHNA INTERNATIONAL UNIVERSITY | A PROJECT REPORT ON SANDEEP TEWATIA ROLLNO.- 10/FIP/U1/BBI/008 ACKNOWLEDGEMENT The study was conducted by the assistance of several individuals. I really appreciate their help and hereby thank them. I would like to give special thanks to the following people: 1 Firstly, I would like to thank Ms. Divya who had supervised the study and was in charge of the entire project. Her presence and assistant was remarkable and so I am grateful to her. 2 Secondly, I would like to thank the outlet managers who were interviewed. They took out time from their busy schedules to help me proceed with my study. Their assistance was very significant and so I am grateful to them as well. 3 Thirdly, I would like to thank all other people who provided me with the resources to conduct my study. Their help and assistance was very valuable and so I would like to acknowledge them as well. Overall all the above-mentioned people had a great role in my study. Their direct and indirect help indeed proved to be a great help. OM BUILDCON PVT. LTD. ------------------------------------------------- Company Profile HEAD OFFICE | : | 648, SEC. 16A, FARIDABAD, HARYANA | TELEPHONE | : | 0129-4070524 | FAX | : | 0129-4074648 | E-MAIL |...
Words: 2691 - Pages: 11
...COB Project Risk Report June 2014 |COB Project | Revision History |Change Log | |Revision # |Date of Revision |Owner |Summary of Changes | |01 |06/08/2014 | |DRAFT Released | | | | | | Table of Contents 1. Introduction 2 1.1 Purpose 2 1.2 Scope 2 1.3 Document Maintenance 2 2. Top 10 Risk 3 Appendix A - Project Risk Report A-1 Project Information A-1 Risks (Top 4) from Risk Register A-1 Corrective Action A-2 Introduction 1 Purpose The purpose of Project Status Summary Report is to provide a consistent approach of reporting the status of project activities across all major capital projects. 2 Scope The Project Status Report will identify the process (es) used to create, update, and publish the report. 3 Document Maintenance This document will be reviewed quarterly and updated...
Words: 612 - Pages: 3
...PROJECT REPORT On OPTICAL CHARACTER RECOGNITION AND SMS BROADCASTING Submitted by JAYANSHU AGRAWAL (110080112019) JAY GANDHI (110080112024) HARSH TRIVEDI (120083112004) ASIT SHAH (120083112005) (Team ID: 784) Guided by DR. BHARGAV GORADIYA PROF. ANISH VAHORA In partial fulfilment for the award of the degree of BACHELOR OF ENGINEERING In Electronics and Telecommunication BIRLA VISHWAKARMA MAHAVIDYALAYA GUJARAT TECHNOLOGICAL UNIVERSITY Ahmedabad May ‘15 BIRLA VISHWAKARMA MAHAVIDYALAYA VALLABH VIDYANAGAR...
Words: 2960 - Pages: 12
...AHMEDABAD-MUMBAI BULLET TRAIN PROJECT: An Overview and study of effects caused due to vibration on surroundings (UDP) A Project Report Submitted by Raj A. Dalwala (140070106018) Jay Y. Dhabuwala (140070106023) Pradeep D. Dodiya (140070106026) Nemil V. Ghandhi (140070106030) Jinal D. Panchal (140070106043) In fulfilment for the award of the degree of Bachelor of Engineering in Civil Engineering Birla Vishvakarma Mahavidyalaya, Vallabh Vidhyanagar Gujarat Technological University, Chandkheda 2017-18 ACKNOWLEDGEMENT "We have put our best efforts in this project. However, it would not have been possible without the kind support and help of many individuals...
Words: 1480 - Pages: 6
...LAS 432 is a capstone course that allows students to show the relationship between society and technology through reading, research, and a course project report. This report included a historical timeline and predecessor assessment section, analysis of impact section, and an ethical considerations section. Discussion and oral and written reports draw together students’ prior learning in specialty and general education courses. The course also included an approximately five-minute presentation on my chosen technology of 3D printing. My career goals now that I completed my program of study have not changed a lot, I am still wanting to work with either a large video game company like Blizzard, Ubisoft, Electronic Arts, or an independent company creating new and exciting games. Where I can work on the levels and in-game interactions in the games, working on a small to medium sized team. Starting as either an Intern or basic level designer then work my way up to Game Director or Senior Game Designer. With a clearly defined career gaols I will be able to not only get myself motivated to achieve my dreams, but I will also greatly increase my likelihood of achieving positive job-interviews....
Words: 552 - Pages: 3
...Petrie’s Electronics Project Closeout Report For Project Management Jim Wantanabe – Project Manager Jim Wantanabe spent a lot of time planning and conducting interviews with key stakeholders inside the company. He also worked with the marketing group made up of loyal customers, to get some good ideas about what they would value in a customer loyalty program. The team came up with requirements and constraints for the customer loyalty project also alternatives were made to show different scenarios. The team did a great job on listing core functions the system has to perform and data flow diagrams. This project has come a long way while accomplishing many things. Now the project has to come to an end. The pilot implementation has been put into place, now it’s time to see what final changes need to be made and closeout this project. Sanjay did a great job on researching the alternatives, data flow diagrams, and making updates. It would benefit him to uses those strengths for another project helping out the IT department. Sally could have done better in the marketing department. She constantly needed caffeine but she wasn’t performing to the best of her abilities. Sam provided some much needed ideas to the interface design. Head of marketing kept submitting request for changes to the loyalty program while the deadline was approaching, but keeping everything electronic saving cost of printing and mailing coupons was a great idea. But marketing felt like giving the customer...
Words: 311 - Pages: 2
...A Project Report On Digital Display: Digital Voting machine Submitted to Amity University Uttar Pradesh in partial fulfilment of the requirements for the award of the degree of Bachelor of Technology By Puneet Kumar(A2324612066) Manish Tiwari(A2324612067) Siddhaika Arora(A2324612068) Saket Kumar(A2324612069) Shubhangi Saxena (A2324612070) Under the guidance of Mr. Kamlesh Pandey DEPARTMENTOF ELECTRICAL & ELECTRONICS ENGINEERING AMITYSCHOOL OF ENGINEERING AND TECHNOLOGY CERTIFICATE On the basis of declaration submitted by students of BTech EEE, I hereby certify that the summer project report titled “Digital Display- Digital Voting Machine” which is submitted to Department of Electrical and Electronic Engineering, Amity School of Engineering and Technology, Amity...
Words: 1831 - Pages: 8
...ON ENVIRONMENTAL ASPECTS OF PROJECT MANAGEMENT ENVIRONMENTAL ASPECTS OF PROJECT MANAGEMENT ABSTRACT The primary challenge in project management is to achieve all of the defined project goals and objectives while adhering to typical constraints which are usually scope, quality, time, and budget. Often, the basic flaw in project planning and design is the complete neglect or minimal consideration of environmental and social costs and dependence only on economic analysis for project preparation and investment. A failure to understand and internalize diverse or negative impacts on environment during project preparation could lead to several undesirable consequences, which may ultimately jeopardize the very objectives of growth and development for which the project was proposed. The need for environmental management for successful project completion is stressed upon and the challenges of addressing the key environmental issues are discussed. Environmental management is not just about the ‘trees and bees’ but also about health, safety, profits, quality assurance, reduced risks to reputation, and increased global competitiveness, states the author. Overall, it is about efficiency and reducing environmental and legal liabilities. It is argued that sound environment management reduces the unforeseen obstacles and bottlenecks that may otherwise hamper the delivery of project objectives while helping to improve the environmental performance of project operations. Environmental...
Words: 962 - Pages: 4
...| ECI PROJECT PLAN2014-15 | bcorp | [Date] | [Course title] | | | ECI PROJECT PLAN2014-15 | bcorp | [Date] | [Course title] | | PROJECT REPORT ON: STRATEGIC PLANNING, FINANCING AND IMPLEMENTING A PRELIMINARY IMPLEMANTATION IN “EXOTIC CAR INC (ECI) FOR 03 YEARS”. With this project report we are explaining about the project strategic plan, analysis, appraisal, finance and preliminary implementation for initial 03 years. Also, we will study all phases of project like - project planning, project analysis, project initiation, project implementation, and project result. Every stage is vital to make a project success. The major areas of the project reports are defined below: Project planning and analysis: 1. ANALYSIS We are about to create a new Project activity plan for ECI. We are about make a plan which will be feasible to implement for attaining more customer and for attaining quality of service 24/7. In this Analysis we will do in-depth study of all the departments of ECI from production to marketing to make a solid analysis of ECI business ways. 2. Detailed planning I. Technical feasibility The Technical Feasibility Study reports shows the details of how ECI will deliver a product or service i.e., materials, labor, transportation, technology needed, etc. A increase in business productivity in ECI would reach through its Technical belongings and thus the Technical products like Materials for car services, Car washer machines...
Words: 1604 - Pages: 7
...Operations Vijay Ramamoorthy Roll No: 173 PGDM, Batch 19 A Project Report on “COST REDUCTION IN LOGISTICS OPERATIONS” A Project Report submitted in partial fulfilment of the requirement for the award of POST GRADUATE DIPLOMA IN MANAGEMENT (PGDM) Submitted by: Vijay Ramamoorthy PGDM, Roll No. 173, 19th Batch (2013-2015) Submitted on 01st July, 2014 Under the guidance of Mr. P. Meenakshi Sundaram Project guide (Deputy Manager, Logistics, CavinKare) XIME Xavier Institute of Management & Entrepreneurship Electronics City-Phase II, Bangalore-560100 Summer Internship Report 1|Page ACKNOWLEDGEMENT The 8 weeks of internship at CavinKare has been an enriching experience in terms of learning and application of theory into practice. The real time experience that I have received is something which cannot be emulated in a class room scenario and will be highly helpful for my professional growth. It has been a fruitful, exciting and value-adding exercise for me. It bears the imprint of many people, and I wish to express my sincere gratitude towards all those who made it possible. First, I would like to express my earnest appreciation and gratitude towards our President, Professor J. Philip, President, XIME for conceptualizing the summer training program. I would like to thank our Senior Dean, Mr. S.D.Tyagaraj for implementing the concept of summer training program. I am grateful to Mr. John Ben, my project guide, for guiding me during my internship. I would like to...
Words: 12790 - Pages: 52
