...set point & the feedback of throttle pressure (median select) and above error is multiply by ULD with a function. On the other hand input of CCS mode controller is the error between ULD & MW Output of turbine follow controller is added with the ratio of Boiler DMD & throttle Pr. Set Point. This output will forward if there is no CCS mode and Turbine Master is in Auto. If turbine DEH is in Remote mode, above output will forward & if DEH is not in Remote mode turbine Reference value is used for control. Turbine Master output will go forward if there is no MFT otherwise it will be 0 Now this forwarded output of turbine master will go further if VP mode is not selected. Now the error of this final Output of turbine Master & turbine load reference goes to DEH controller & generate GV increase/ decrease pulse. Throttle Pressure Set point: If variable pressure mode is selected Variable Pressure mode is a mode in which ______. This mode can be selected when unit is in CCS mode & ULD (Unit load Demand) is in between 60 to 210. Variable Pressure mode will be out (reset) if unit goes out from CCS mode or Variable Pressure mode NO PB (Push button) pressed from graphics. There are three selections for Variable Pressure mode. 1. Variable Pressure Mode A 2. Variable Pressure Mode B 3. Variable Pressure Mode C These modes can be set by Operator Desk. VP mode A PB can be set (=1), if VP mode B PB & VP mode C PB & MSSD auto mode is not active (=0). Similarly for VP mode...
Words: 408 - Pages: 2
...Decisions of Uncertainty Introduction The Decision What is the probability of hiring a qualified employee upon selecting one from 52 applicants 26 are male and 26 are female? Probability Concepts The probability of the event –hiring a qualified male employee—is the proportion of times the company would expect to obtain a qualified male employee over the long run if the HR managers selected applicants many times. I will refer to each repetition of the situation – in this case the selection of a qualified male future employee—as a sampling experiment. The probability of the event is the proportion of times we would expect the event to occur in an infinitely long series of identical sampling experiments. The Outcome In this case, the probability of selecting a qualified male employee is 0 .50 or 50%. I arrived at this conclusion by using the knowledge that there are 52 applicants who areapplying for the open position, 26 are female and 26 are male. If the company assume that each of the 52 possibilities is equally likely, it is reasonable to expect that the company would select a male applicant that is qualified for the open position 0.50 of the time of a period of time ( 26/52 = ½ = 0.50 ). This illustrates the basic rule for obtaining probabilities in situations in which each of the possible outcomes is equally likely, the probability of the occurrence of an event is equal to the proportion of the possible outcomes characterized by the event. In the case of...
Words: 341 - Pages: 2
...Task 1 of 2 Create a Universal Group called Replication Management Admins in an OU you’ve chosen to hold groups for delegated access or other security related task. Open ADSI Edit and connect to the Configuration Naming Context as seen in the image below. Once you've selected Configuration in "Select a well known Naming Context", click OK Expand the Configuration Naming context and right click the Naming Context node below it. See the picture below for the arrow indicating where you should right-click. Next Click Properties Click the Security Tab Click the Advanced button Click Add Enter the name of the Universal Group you created in Step 1 and click OK In the Permission Entry for Configuration box scroll to the bottom and tic the Allow box for the Replication Synchronization permission. Ensure that "This object and all child objects" is selected for the Apply to and click OK Click Apply, then OK, and then click OK once more and you should be back to ADSI Edit with no open dialog boxes. Task 2 of 2 After you’ve completed steps 1-10 in Task 1 you'll need to view all the replicated partitions and do the same process for each partition. Click on CN=Partitions under CN=Configuration, DC= to view the partitions in the Configuration naming context. On each partition right click each object and select New Connection to Naming Context. Note: You don't have to do this for...
Words: 354 - Pages: 2
...risks due to potential loss of funding” (Wager, Lee, & Glaser, 2009, para. 9). Implementing a new software system will benefit the Mobile Mammography Van greatly. This paper is intended to identify the process for selecting and acquiring an information system, explain how the organizations goals drive the selection process, and identify the roles each organization’s stakeholders play in the selection process. Selecting and Acquiring an Information System When an organization is selecting and acquiring a new information system there is a great deal of planning and steps they must take to implement the system properly. The first step is to establish a project steering committee. “This committee’s primary function is to plan, organize, coordinate, and manage all aspects of the acquisition process” (Wager, et. al., 2009, pg. 150). After the committee has been formed the project goals should be outlines along with the scope of the project and committee. Many questions will need to be discussed during this step. For example, the committee will need to determine the methods, processes, communication techniques, resources, and type of system that will be used through the selection and acquisition process. Once project goals and the scope of the project are defined the next step is to screen the marketplace and review vendor profiles. “Concurrently with the...
Words: 985 - Pages: 4
...Name :Muhammad Musab Hussain ID:7601 Subject :MGM411 Human resource a,Analyze the job selected position and wirte their job description and job specification? Ans, description * Sales of companies goods and services * Building relationship with customers * Responsible for repeat sales of existing customers * Approaching customer with the aim of making new business deals * Presenting the product or service in a professional or structured way * Researching the market * Checking the inventory for products * Responding to incoming emails and phone calls * Attending team meeting and providing valuable feedback Specification * Strong sales skills * Communication skills * Bachelor’s degree * Master’s degree * Ability to multitask * Delivering revenue or exceeding target * 3 years minimum experience in sales * Organizational and time management skills * Negotiating and closing sales B,what method will you adopt for appointing a person on the selected position? Ans, 1. Top management approval 2. Advertisement development 3. Post advertisement on the news paper 4. Call the people for interviews 5. Conducts interviews 6. Select the people which best match the requirement 7. Further skim them 8. Conduct another interview 9. Upon approval select the final people for hiring 10. Conduct the physical examination 11. Hire people that pass the final test. c,how...
Words: 355 - Pages: 2
...type attribute, browsers assume you are creating a(n): a. file input box b. text input box ***** c. hidden input box d. image input box 3. What is required in the syntax when you need to refer to the control element? a. checkbox b. form label c. id attribute ******** d. name asterisk 4. The asterisk in Name* tells users that Name is a(n): a. id attribute b. required field ******* c. form label d. inline element 5. You create a selection list using the: a. id attribute b. name attribute c. option element d. selection element ******* 6. Which term defines the number of options that the selection list displays at one time? a. element b. control c. value **** d. field 7. Consider your audience and its initial reaction to a selection list when setting the: a. size attribute ****** b. list control c. style coding d. type option 8. The name attribute provides the name of the: a. field value b. selection list c. style sheet d. data field ***** 9. To create an option button, use the input element with the type attribute set to a value of: a. file b. image c. radio ******* d. text 10. When you use the same name for two or more option buttons, browsers treat them as a group, so selecting one option button automatically: a. highlights all the others b. selects all of the others c. deletes all the others d. deselects all of the others ***** ...
Words: 449 - Pages: 2
...Chapter -6 Employee Testing And Selection The importance of Selecting the Right Employee: If the Right Employee is not selected then there will be some problem like fall of organization,low performance,cost of recriting and hiring .there may 3problem feced by the employer if he Select wrong person Organizational performance Cost of Recruiting and hiring Legal Obligation and Liability Organizational Performance: Employee performance affects organizational performance.Organizational performance including stragic planner operation,finance.legal and organizational development will fall if the employer select the wrong candidate Perfromance differ for different employee The Costof Recruitong and hiring:The cost of simlpy finding the right person recruiting cost.if wrong person hired the the organization have to take another Interview ,advertige so that will increase the cost of the organization Legal Obligation and Liability:The candidate who apply for the job may be he/she be a bad person .He may have Criminal activities.so these Candidate can do Crime in the organization or harm the organization Avoiding Negliting hiring claims: • Carefully Scrutinze information on employment applications.the information about candidate provided on the application should be read very carefully • Get Written Authorization...
Words: 296 - Pages: 2
...1 ) Create a new query in Query Design, including the Employee Info and Sales by Employee tables. Add the First Name and Last Name fields from the Employee Info table, and the Quarter and Actual Sales fields from the Sales by Employee table (in that order). Run the query. Ribbon 1. | Click the CREATE tab. | 2. | On the CREATE tab, in the Queries group, click Query Design. | 3. | In the Show Table dialog box, with the Employee Info table selected, click Add. | 4. | Click the Sales by Employee table and then click Add. | 5. | Click Close in the Show Table dialog box. | 6. | In the query design window, in the Employee Info table, double-click the First Name field. | 7. | In the query design window, in the Employee Info table, double-click the Last Name field. | 8. | In the query design window, in the Sales by Employee table, double-click the Quarter field. | 9. | In the query design window, in the Sales by Employee table, double-click the Actual Sales field. | 10. | On the DESIGN tab, in the Results group, click Run. | | Keyboard 1. | Press ALT (or F10, or F6 two times), C, and then QD. | 2. | In the Show Table dialog box, with Employee Info selected press ALT+A (or ENTER or TAB to select the Add button, and then press ENTER (or A or SPACEBAR)). | 3. | Press S (or use ARROW keys) to select the Sales by Employee table, and then press ALT+A (or ENTER or TAB to select the Add button, and then press ENTER (or A or SPACEBAR))...
Words: 10463 - Pages: 42
...MDSE 3750 Consumer Studies Semester Project Objectives: * To provide students with the opportunity to apply course concepts and ideas to a specific brand/product * Develop your team building, * Refine time management skills, * Apply written and oral communication skills. Procedures: Groups and Brand Selection 1. Groups of three people will be formed. You will have a window of opportunity to select your own group; students not selecting a group will be placed in one. * Sign-up Deadline: Midnight, September 24 * All student not in a group by the time Dr. Kinley logs on September 25 will be placed into a group. 2. You will be asked to select a brand (of product or store) to focus on for the semester. 3. Once groups are formed, students will submit their “top 3” list in the Bb Discussion Board, which will open on September 25. Dr. Kinley will make the final selections for each group. Your Top 3 should be in order of preference. **** NOTE: This discussion board will be in the “Discussion” menu-item on the left-menu of Bb. DO NOT POST YOUR PREFRENCES IN YOUR GROUP DISCUSSION BOARD. Project: After the brand/product is selected, your group will focus on that specific product and relate it to all concepts we discuss in class. Your team will keep a running wiki of how each chapter’s materials relate to the product (starting with Text Chapter 3). In some chapters, there will be more to discuss than others. Your...
Words: 654 - Pages: 3
...Self-Guided Career Exploration Personality Assessment Instructions The process of selecting an academic major and deciding upon a future occupation is ongoing and multi-faceted. Therefore, when you begin to engage in independent exploration and reflection prior to meeting with career counselors or other professional staff, you are able to have more productive sessions that help you to effectively identify possible academic majors, and more confidently explore your career options. The FYE Career Exploration website is now available to facilitate such self-guided exploration! A link for the site is available from the FYE {First Year Experience} web page in MyHCC. On the HCC homepage, click on <STUDENT SERVICES>. 1. Select <SUPPORT AT HCC>. 2. Select <FIRST YEAR EXPERIENCE>. 3. Under the heading “FYE CAREER RESOURCES”, click on <CAREER EXPLORATION>. 4. On the FYE Career Exploration website go to the “Career Exploration Registration” tab and complete the required information. 5. Go the “Career Exploration Activities” Tab. 6. Be sure to read the Topic Overview to begin your exploration and reflection. Feel free to explore other activities on the FYE Career Exploration site. 7. Click on the GREEN link for the “Personality Assessment” and click on “Register Here” {this second registration is required by the assessment vendor}. 8. Complete the “Do What You Are” [DWYA] assessment. Read your results...
Words: 278 - Pages: 2
...MKT 441 Week 2 Learning Team Market Research Implementation Plan Problem Identification and Project Outline To Buy This material Click below link http://www.uoptutors.com/MKT-441/MKT-441-Week-2-Learning-Team-Market-Research-Implementation-Plan-Problem-Identification-and-Project-Outline Select an organization with which you are familiar. This organization will be the basis for your Market Research Implementation Plan. Be sure to obtain your instructor’s approval before beginning this project. Select a scenario from the following list: An organization is planning to introduce a new product/service in another country An organization is considering introducing a new product/service An organization is considering launching a new business unit An organization is considering pursuing a new geographical market An organization is considering adjusting the pricing of an existing product/service An organization is considering enhancing an existing product/service to meet expanding customer needs An organization wants to evaluate its perceived customer service Prepare a 700 to1050 word detailed outline of your Market Research Implementation Plan in which you address the following: Write an introduction describing your selected organization and scenario. Based on your selected scenario, identify the detailed areas in which market research is needed (e.g., population, target market, per capita) and describe their importance to the organization in the selected scenario. Develop...
Words: 262 - Pages: 2
...MT 400 Unit 8 Assignment: Establishing Baselines and Assessing Success https://homeworklance.com/downloads/mt-400-unit-8-assignment-establishing-baselines-assessing-success/ Unit 8 Assignment: Establishing Baselines and Assessing Success In this Assignment, you are going to evaluate a specific business process based on criteria detailed below. If you already have selected a business process, continue using that and skip to the next paragraph. If you have not yet selected the business process you will use for these Assignments, then begin by selecting one. Email your instructor and clearly describe the objective of this process, the participants, and the strategic significance for the company. The business process you select must have a clear beginning and an end, with identifiable, specific steps. Your instructor will confirm that the process you selected is suitable or will ask you to select another one. For this Assignment, write a paper that answers the following questions (use the subheadings/numbered questions below to organize your paper): Part 1: Implementation Strategies Evaluate the suitability of the four implementation strategies discussed in step 2 for your project. ● For each strategy, explain the specific pros and cons of using it for your project. The analysis should be based on how each strategy applies to the process you selected and the nature of your selected organization. Do not simply repeat the generic pros/cons from the book. ● Select...
Words: 955 - Pages: 4
...1) Select one aspect of your own culture from the list provided for Part I. Be sure to review the relevant sections of the textbook for each topic. Once you've made your selection, please delete all other options. Race Education Communication Gender Childrearing Courtship and Marriage Rites of passage Religion Politics Economics 2) Select a source to use for Part I of the paper. You will be using your textbook and the article by Miner for this section as well, but for this assignment, include the source you found on your own. Review the tutorial on Evaluating sources and enter the reference in the space below. Reference entry in APA format: 3) Select one article from the list for Part II. Once you've made your selection, please delete all other options. Atran, S. (2003). Genesis of suicide terrorism. Science, 299(5612), 1534-1539. Retrieved from the EBSCOhost database. Becker. A. E. (2004). Television, disordered eating, and young women in Fiji: Negotiating body image and identity during rapid social change. Culture, Medicine & Psychiatry, 28(4), 533-559. Retrieved from the EBSCOhost database. Grey, S. (2008). Historical roots, contemporary relevance: Explaining the persistence of polygyny in Sub- Saharan Africa. Undercurrent Journal, 5(3), 6-19. Retrieved from the EBSCOhost database. Hoodfar, H. (1993). The veil in their minds and on our heads: The persistence of colonial images of Muslim women. Resources for Feminist Researchers...
Words: 359 - Pages: 2
...client and server functionality. The testing is performed manually from the end user point as documented in the herein contained Test Cases. The following requirements must be met to run the program: Java Integrated Development Environment (IDE), MySQL database. Netbeans 7.0.1 was utilized in making the program and testing it . MySQL is open source SQL database. They both can be downloaded for free of charge. Windows 7 OS was used to host both pieces of software. There are minimum requirements that can be referenced on download websites. Each option available in the program will be tested. The Use Case Diagrams may be referenced for further details on functions of each option. The test will test each available selection. The selections to be tested are as follows: 1-Add Student Information 2-Update Student Information 3-Query Student Information...
Words: 929 - Pages: 4
...Probability of At least 2 People Having the Same Birthday in a group of 25, 50, 75, 100, 500 and 1000 The Simulation has been designed using the computer based program Excel. It is formed to understand the probability of at least 2 people sharing the same birthday in randomly selected groups of 25, 50, 75, 100, 500 and 1000. The simulation is run for 30 iterations for each group that means that the simulation for 25 randomly selected people will be run 30 times and so on. Assumptions v The year has 365 days (not considering the leap year). v Every day of the year has an equal probability for a birthday to occur. v The year of the birth is not considered; only the date and the month are considered. v Any other factor influencing the birth such as human behavior or weather etc. is not taken into account. v Twins or triplets are not in same group. A. · Open the new excel file, name it Task1, save it on desktop. Take the cursor to cell A1 (the horizontal column is represented by alphabets and vertical rows by numbers and each of the box is called a cell). Write Group 1 and drag it horizontally up to 30 columns the last cell would have Group 10. · In cell A2 write the formula =RANDBETWEEN (1,365) and enter (we are taking the number of days in a year as we cannot take the dates of months). Then keep the cursor on the lowest right corner and drag until A26. · Now select the cell A2 and drag it to its right side cell B2 and drag down until B26, similarly do the same process...
Words: 819 - Pages: 4
