...regional analysis, it was found that South India leads the country in terms of commercial vehicle market. Besides, the growth in the CV industry will boost up demand for used commercial vehicles in coming years. Global: The global commercial vehicle industry witnessed negative growth during 2006-2011; however, over 2012-2017, it is forecast to experience moderate growth and is estimated to reach $521.5 billion by 2017.The global commercial vehicle industry consists of the production of light commercial vehicles (LCVs), heavy trucks, and buses and coaches. It focuses on the freight and transportation sector as its major customers. Top 5 countries for CV industry 1) Isuzu 2) Daimler AG 3) Volvo Group 4) Toyota Group 5) Tata Group...
Words: 1597 - Pages: 7
...from 2000 to 2005. Imported LCV were uncommon in India due to serviceability and durability concerns. The major player in this market segment are Tata motors – They are the leader in the market with a market share of 51% Mahindra & Mahindra – M & M has a market share of 33% Swaraj Mazda – they have a market share of 5% Eicher Motors – also has a market share of 5% Q2 Justify the launch of Tata Ace with respect to the research outcome which has been described in the case study The road network in India was very poor but there were plan for large road infrastructure project planned that would not only connect the major cities in India but would also provide connectivity between smaller towns and villages. Also in India the farmer typically own smaller land and run small operations so for them using a larger commercial vechile was not a very economical option and hence they had to rely on load consolidation to transport their good. This lead to wasted time and in turn spoiled crops. Typically rural market was current being served by 3 wheeler. Three wheeler had their problem with speed pay-load, reliability and safety. A new four wheeler in the same price range would solve these problems. People also perceived driving a 4 wheeler as a high status then that of driving 3 wheelers. All these put together the Ace team believed that the market was rightly poised to introduce a low cost four wheeled commercial vehicle. Q3 How many types of gratifications does...
Words: 588 - Pages: 3
...The Tata Ace : Case Study Analysis One of the biggest conglomerates in India, the TATA Group are a name to reckon with . The revenue generated by the TATA group in 2006 was equal to 2.8% of India’s GDP . It has several sectors in IT, transportation , steel etc . One of the biggest revenue provider of the TATA group is the TATA motors which is an independent body and the TATA group holds 32% equity in it . Though TATA motors is such a big company, it showed a loss of Rs 5 billion in 2001 , biggest in TATA motors as well as in the history of INDIA’s motor sector . TATA motor Group MD, MR Ravi Kant decided some drastic measures were necessary to uplift the company once again . The idea of TATA Ace came to the manager of the TATA motor Group MD, MR Ravi Kant when he identified the market need for a commercial vehicle in the Medium Segment. Thus the idea of tata ace was born. India’s small and medium commercial vehicle sector was majorly controlled by the 3 wheeled autos and goods vehicles which were neither good to look at nor reliable and fell in the price range of 100000 – 200000 . Ace was targeted to be priced at 200000 but was subsequently launched at 225000. It was priced at 50% less than other 4 wheeled goods carriers . The project was given to the 30 year old engineer Wagha . There were quite a few reason for Ace’s success : 1. It offered a feel good factor for drivers as compared to 3 wheeled autos etc . 2.Though it has a higher initial cost, the maintenance cost was...
Words: 361 - Pages: 2
...MARKETING STRATEGIES ASSIGNMENT “TATA ACE” CASE STUDY 1) Why do we feel Tata Motors was targeting LCV (Light Commercial Vehicle) segment under commercial segment for TATA ACE? Better highway systems like the Golden Quadrilateral meant that Commercial vehicles in 45+ Tonnes could carry bulk loads covering large distances in shorter time and at lower per tonne per km cost. Government also went about the task of improving road network between medium sized cities and also building all weather tertiary road network covering rural towns- only smaller and rugged vehicles could operate on these roads ( Pradhan Mantri Grameen Sadhak Yojana). Increased congestion & pollution in most of the cities forced the government to regulate the movement of Large/ Heavy trucks (larger than four tonnes) in the cities. - - Tata motors considered the above primary factors in determining the need for large commercial vehicles for the highways and smaller sub 4 Ton category commercial vehicle for operating on both Inter city/ Town and Intra city road network. Ruling out the possibility of developing large commercial vehicles due to the high cost of development and fearing loss of revenues from their niche standard size truck segment, Tata motors decided to develop TATA ACE targeting the Light Commercial Vehicle Segment. Also helping their decision process were some key policy initiatives: Discouraging the use of Old. Polluting & uneconomical vehicles Scrapping of >15 years old vehicles Ban...
Words: 1046 - Pages: 5
...Tata Motors with their Ace Based on EMPI-Indian Express Indian Innovation Award Wining Entry by Tata Motors Registered Office: Bombay House, 24, Homi Modi Street, Mumbai Abstract: Tata Motors, India's largest integrated automobile manufacturer today, designed the country's first indigenously developed mini-truck for both rural and urban use. The versatile, high performance and efficient mini-truck, ACE. Key words: Indigaeanous Development, Innovative Organsiation, Mini Trck, Rural Transport 1. Introduction Development of road infrastructure has led to an increase in the distribution of goods across the country, based on the hub and spoke model. The ACE is powered by a unique twin cylinder 16bhp IDI 700cc diesel engine and with its launch the Company introduces a new category in the commercial vehicle segment. Tata Motors recognized the growing trend as well as the need for a last mile distribution vehicle. Keeping that in mind they developed a pick-up vehicle designed to carry larger and heavier payloads in the sub-2 ton category. Simultaneously, anticipated an opportunity in the sub-1 ton payload segment Tata Motors has indigenously developed a reliable and cost effective 4-wheeler for this segment with a water-cooled, twin cylinder diesel engine, making the ACE among the few mini-trucks in the world to be powered by a diesel engine. The Ace is ideal for short, narrow village roads as well as long highway hauls; for small bulky loads as well as large heavy ones. The small...
Words: 3196 - Pages: 13
...Literature Review On Why TATA NANO Flops in the market Shabid Ashraf Abhishek Sharma Ankita Singh Neha Dagur Shikha Mathur Dept. Of Management Studies, Malviya National Institute Of Technology Abstract: When the Tata Nano, a stripped-down minicar priced at around $2,000, was introduced in 2009, it was marketed as a car that would transform the way aspiring consumers in India and other developing countries got around. But the low-cost automotive revolution fizzled. Selling poorly at home and with exports drying up, the Nano has become a cautionary tale of misplaced ambitions and a drag on sales and profit at Tata Motors. It turns out that those climbing into India's middle class want cheap cars, but they don't want cars that seem cheap—and are willing to pay more than Tata reckoned for a vehicle that has a more upmarket image. In this study we will see why TATA is trying remake the "people's car," into the "cool people's car." It has given the car itself a face-lift, adding a stereo, hubcaps and chrome trim, raised the price and started a new marketing campaign to give it more cachet. 1. INTRODUCTION Tata Motors Limited is India's largest automobile company, with consolidated revenues of INR 1,88,818 crores (USD 34.7 billion) in 2012-13. It is the leader in commercial vehicles in each segment, and among the top in passenger vehicles with winning products in the compact, midsize car and utility vehicle segments. It is also the world's fifth...
Words: 2101 - Pages: 9
...House of Tata – Acquiring a Global Footprint Group 1 Bhuvan Bajaj Karan Bahl Raki Jain Trivikram Apte Vinayak Pareek Yan Yan Huang House of Tata – Acquiring a Global Footprint Executive Summary What and how did TATA emerge as a Multi Brand? Founded in 1868 by Jamshetji N. Tata as a trading firm Textiles in 1874 India’s first luxury hotel in 1903 First private steel company in 1907 First airline in 1932 First software firm in 1968 Liberalization of the Indian Economy and the changes that it brought to TATA’s way of doing business Ratan Tata becomes chairperson in 1991 • • First objective: Streamline group portfolio Some groups diversified and others organized around seven sectors 2 Major global expansions In 2000, Tata groups started internationalized operations and 65% of collective revenues were expected to come from outside India 1. Tata Consultancy ServicesWhy TCS, the group’s tech and consulting giant underwent its evolution at a much faster rate than the other Tata companies, in a sense became more global. And they perceived more growth in the foreign market and had to expand globally, TCS accounted for $27.8 billion of Tata’s $59.5 billion market capitalization as of August 2007 2. TitanExpanded globally but suffered high losses thus established itself as an NRI brand, especially in the Middle East. 3. Indian Hotels Company – TAJ Hotel Group Began globalization in 1982, Tata purchased 51 Buckingham gate and St. James court hotel which was later branded as...
Words: 3509 - Pages: 15
...Marketing Management-1 Project: Tata Motors ------------------------------------------------- Submitted by- ------------------------------------------------- Ranjith Narayanan 0315/52 ------------------------------------------------- Ritesh Kumar 0325/52 ------------------------------------------------- Saahil Nagrani 0335/52 ------------------------------------------------- Sandeep Kumar Pal 0345/52 ------------------------------------------------- Sarthak A Nayak 0355/52 ------------------------------------------------- Shah Yash Virajbhai 0365/52 ------------------------------------------------- Shrey Chaturvedi 0375/52 INDEX Contents | Page no. | Pestel analysis | 2 | porter’s five forces analysis | 9 | STP Analysis | 12 | product portfolio | 16 | Distribution Channels | 22 | curious case of tata nano | 25 | conclusion | 28 | references | 30 | PESTEL ANALYSIS Political ENVIRONMENT:- TATA motors with more than 60,000 employees is plying more than 8million vehicles on Indian roads. It is operating in multiple countries across Europe, Asia, Africa, Middle East and Australia. Because of this it needs to pay a close attention to political climate across the world. Government policies like labor laws, corporate laws, land acquisition, import duties and exports laws have a deep impact on the working of the manufacturing giant, TATA motors. TATA motors has been involved in Singur plant controversy. TATA wanted to build a plant in Hoogly...
Words: 7782 - Pages: 32
...Strategic development TATA MOTORS Introduction: Tata Motors Limited (formerly TELCO, short for Tata Engineering and Locomotive Company) is an Indian multinational automotive manufacturing company headquartered in Mumbai, Maharashtra, India and a subsidiary of the Tata Group. Its products include passenger cars, trucks, vans, coaches, buses, construction equipment and military vehicles. It is the world's seventeenth-largest motor vehicle manufacturing company, fourth-largest truck manufacturer and second-largest bus manufacturer by volume. Tata Motors has auto manufacturing and assembly plants in Jamshedpur, Pantnagar, Lucknow, Sanand, Dharwad and Pune in India, as well as in Argentina, South Africa, Thailand and the United Kingdom. It has research and development centres in Pune, Jamshedpur, Lucknow and Dharwad, India, and in South Korea, Spain, and the United Kingdom. Tata Motors' principal subsidiaries include the British premium car maker Jaguar Land Rover (the maker of Jaguar, Land Rover and Range Rover cars) and the South Korean commercial vehicle manufacturer Tata Daewoo. Tata Motors has a bus manufacturing joint venture with Marcopolo S.A. (Tata Marcopolo), a construction equipment manufacturing joint venture with Hitachi (Tata Hitachi Construction Machinery), and a joint venture with Fiat which manufactures automotive components and Fiat and Tata branded vehicles. Founded in 1945 as a manufacturer of locomotives...
Words: 8963 - Pages: 36
...UVA-M-0768 Rev. Feb. 2 2011 24, THE TATA NANO THE PE T O: EOPLE’S CAR It was one of the longest t f t-awaited an most talke nd ed-about aut tomobile deb in India On buts a. January 10, 2008, Ta Motors unveiled its (U.S. dollar USD2,50 car1 (also called “Rs1 lakh ata u rs) 00 car” or “t people’s car”) at the ninth Auto Expo in New Delhi. The Tata Nano brought a m the s w o media blitz and a crush of onlookers th required top-level sec o hat t curity. Woul the car liv up to its h ld ve hype? ignal a new era for the sm car mar e mall rket in India How could Tata ensur the a? re And did its launch si w ofitable? product would be pro Widely touted as the chea W d apest car in the world, th Nano was scheduled to be availab in t he s ble September 2008. In addition to paying (Indian rupees) IN lakh— a p INR1 —equivalent t INR100,0 to 000— buyers would also have to pay 12.5% valu w h ue-added tax along wit charges s x th such as road and d transport tation taxes. The two-cy ylinder gaso oline-powere version w ed would debut first; the d t diesel versions would soon follow. The Nano wa one of th world’s most fuel-eff T as he m fficient cars, getting 52 miles per g gallon (mpg) in the city and 61 mpg on the highwa (22 km pe liter and 2 km per lit respectiv d n ay er 26 ter, vely). Measurin 3.1 meters by 1.5 meters, it dis ng m splaced Mar Udyog’s Maruti 80 as the wo ruti s 00 orld’s smallest...
Words: 3951 - Pages: 16
...See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/228143324 The Tata Nano: The People's Car ARTICLE · JUNE 2009 CITATION READS 1 709 3 AUTHORS, INCLUDING: Paul Farris University of Virginia 115 PUBLICATIONS 1,044 CITATIONS SEE PROFILE Available from: Paul Farris Retrieved on: 08 January 2016 UVA-M-0768 Rev. Feb. 2 2011 24, THE TATA NANO THE PE T O: EOPLE’S CAR It was one of the longest t f t-awaited an most talke nd ed-about aut tomobile deb in India On buts a. January 10, 2008, Ta Motors unveiled its (U.S. dollar USD2,50 car1 (also called “Rs1 lakh ata u rs) 00 car” or “t people’s car”) at the ninth Auto Expo in New Delhi. The Tata Nano brought a m the s w o media blitz and a crush of onlookers th required top-level sec o hat t curity. Woul the car liv up to its h ld ve hype? ignal a new era for the sm car mar e mall rket in India How could Tata ensur the a? re And did its launch si w ofitable? product would be pro Widely touted as the chea W d apest car in the world, th Nano was scheduled to be availab in t he s ble September 2008. In addition to paying (Indian rupees) IN lakh— a p INR1 —equivalent t INR100,0 to 000— buyers would also have to pay 12.5% valu w h ue-added tax along wit charges s x th such as road and d transport tation taxes. The two-cy ylinder gaso oline-powere version w ed would debut first;...
Words: 4004 - Pages: 17
...The case discusses the making of Tata Nano, the world's cheapest car, manufactured by India based Tata Motors. On March 30, 2009, Tata Nano was launched with an ex-factory price tag of INR 100,000 (about US$ 2000). The case explains the design and development process of Tata Nano. The car was the result of a five year research and development project carried out by Tata Nano development team. While developing the car, Tata Motors and its suppliers constantly made efforts to reduce the costs while ensuring quality of each and every component including engine, steering, wheels, tires, windshield washing system, gear shifter etc. | | Analysts opined that Tata Nano had created a new segment in the passenger car market. However, they were concerned about the company's lack of capacity to fulfill high demand. They also argued that considering the low margins the company would get, it would take a long time for the project to break even. The case ends with a discussion on the challenges Tata Nano might face in the future. ------------------------------------------------- Excerpts ------------------------------------------------- Background Note The history of Tata Motors dates back to the mid-1900s. In 1945, Tata Motors was incorporated as Tata Engineering and Locomotive Company Limited (TELCO). The company was engaged in manufacturing locomotives and engineering products. Three years later, it launched a steam road roller in association with the UK-based Marshall Sons.....
Words: 1782 - Pages: 8
...acquisition. Quadrant 2 – International Strategy. Low requirement for centralised quality check and strategic decision making eliminating the need to adapt to individual countries. Mixed strategy combining low demand for integration and responsiveness. Quadrant 3 – Transnational Strategy. High requirement for integration and differentiation. Emphasizing both global integration and local responsiveness. Quadrant 4 – Multi-domestic Strategy. High requirement for differentiation but low concern for integration. Emphasize on local adaption. 2.1 ANALYSIS Adaption from the Case Studies and Research Cases Tata Group uses two different strategies locally and internationally when dealing with its businesses. Local businesses under Tata Group’ umbrella uses the Domestic Strategy which requires product differentiation base on the local adaption. Such example is the Tata Nano Car and the Tata Ace...
Words: 2785 - Pages: 12
...Pitch: This case talks about how Tata Motors, India's largest automobile company, developed the Nano, the world's cheapest car. The case focuses on the translation of Ratan Tata's (chairman of Tata Motors) vision of a safe affordable car for the masses by Ravi Kant, managing director of Tata Motors into the Nano Project. The case raises questions around breaking the price-quality barrier and changing existing internal processes to accommodate revolutionary new ideas. The dilemma of success—Tata Nano was a runaway bestseller—left Tata Motors debating how large a bet they should make on the Nano and what kind of capacity commitment this requires. Never before in the history had, a new product in the automobile industry created such a huge buzz after Ford's famous Model ‘T’. Ever since Ratan Tata announced that he would make a ‘People’s car’ for a price less than $ 2,500, in 2003 Geneva Auto show, it mystified various groups of people about the possibility of price, power, quality, performance and other factors. However, Ratan Tata was never to be bogged down with by apprehensions and or naysayers. During 2008, Nano was all over the press for the wrong reasons and that probably would have been a blessing in disguise for Nano’s buzz and all the critics were are silenced for ever when the car was launched on March 23rd 2009 with various public and private sector banks offering loans to customers. Nano and Ratan Tata became almost synonymous providing India Inc. in general and Tata Group...
Words: 3098 - Pages: 13
...COMPANY REPORT: TATA MOTORS Chapter 1 INTRODUCTION India has been one of the largest automobile industry in the world. The growth of this industry had been one of the fastest globally but due to various reasons the growth has unacceptably declined in the present day. Passenger car and commercial vehicles manufacturing industry of India stands in the sixth position in terms of volume, 3.9 million units were produced in 2011. India saw a growth from 16 to 18 percent of sales during 2011 to 2012.Earlier Brazil was ahead of India in terms of volume production. India managed to surpass the old and new auto makers such as Belgium, United Kingdom, Italy, Canada, Mexico, Russia, Spain and France. India managed to beat Thailand in 2010 and came forward to third position from fourth position the previous year in being Asia’s largest exporter of passenger cars. By 2015, the Society of Indian Automobile Manufacturers predicted that the annual vehicle sales will increase to 4 million. India’s car manufacturing industry can be largely divided into three hubs i.e. the south, west and north. Chennai in the southern cluster contributes 35% of the share of revenue. Mumbai and Pune in the western cluster is responsible for contributing 33% of the revenue and the National Capital region in the northern hub contributes 32%. Ford, Hyundai, Daimler, BMW, Hindustan Motors, , Nissan, Caparo, Mini, Renault, Mitsubishi, and Datsun have their operating station in Chennai. General Motors, Tata Motors, Force...
Words: 4938 - Pages: 20
