Premium Essay

Value Management and Value Engineering

In:

Submitted By arslansayani
Words 4135
Pages 17
STUDENT NAME

DEGREE

PROJECT SUPERVISOR

PROJECT TITLE Engineering and Management Practice in UAE and Significance of its Post Economic Crisis
DATE

KEYWORDS Value
Sustainable development
Management

Literature Review
1.1 Introduction
Extensive research has been done on value engineering and value management over the past and as a result different concepts have been formulated and valuable literature has been produced. However, most of this research has been based upon cost effectiveness and other functional issues that have been arising over the past decades and why it is important to focus on this particular aspect.
The literature has been reviewed, focusing on various aspects of value engineering and value management and its importance in construction industry, so as to obtain a better understanding as to the role of sustainability in civil engineering. Literature has also been reviewed into what factors lead to the implementation of basic principles of value engineering and value management.
1.2 Value
Value is a term which is difficult to define by most scholars. It carries different meaning and weightage for different people. It is commonly linked with product cost or product manufacturing price and service cost (Cheah and Ting, 2005). Typically, it is defined as the ratio of the product worth which it carries for a person and the price he / she pays for it. 100 percent value can be achieved if the product or service received is worth the money which is being paid for it (Elias, 1998). This perspective indicates that value is a subjective term which differs from person to person, as value of a particular product can be good for one person may not be so good for other (Shen and Liu, 2004). Value analysis comes into applicability when it is felt that a product costs too much and is more than it’s worth, there is always a scope

Similar Documents

Premium Essay

Aftab Ali

...Engineering and Technology Management Tools and Applications For a listing of recent titles in the Artech House Technology Management and Professional Development Library, turn to the back of this book. Engineering and Technology Management Tools and Applications B. S. Dhillon Artech House Boston • London www.artechhouse.com Library of Congress Cataloging-in-Publication Data Dhillon, B. S. Engineering and technology management tools and applications/B.S. Dhillon. p. cm. — (Artech House technology management and professional development library) Includes bibliographical references and index. ISBN 1-58053-265-9 (alk. paper) 1. Engineering—Management. 2. Technology—Management. I. Title. II. Series. TA190 .D47 2002 620’.0068—dc21 2002074491 British Library Cataloguing in Publication Data Dhillon, B. S. Engineering and technology management tools and applications. (Artech House technology management and professional development library) 1. Engineering—Management 2. Technology—Management I. Title 620’ . 0068 ISBN 1-58053-265-9 Cover design by Igor Valdman © 2002 ARTECH HOUSE, INC. 685 Canton Street Norwood, MA 02062 All rights reserved. Printed and bound in the United States of America. No part of this book may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without permission in writing from the publisher. All terms mentioned in this book that...

Words: 97747 - Pages: 391

Premium Essay

Supply Chain Management

...International Journal of Engineering and Technology Innovation, vol. 3, no. 3, 2013, pp. 134-143 A Case Study Improvement of a Testing Process by Combining Lean Management, Industrial Engineering and Automation Methods Simon Withers1, Jose Arturo Garza-Reyes2,*, Vikas Kumar3, Luis Rocha-Lona4 1 2 3 4 Turbo Power Services, Bardon, UK. Centre for Supply Chain Improvement, The University of Derby, Derby, UK. Dublin City University Business School, Dublin City University, Dublin, ROI. Business School, National Polytechnic Institute of Mexico, Mexico City, Mexico. Received 04 April 2013; received in revised form 25 April 2013; accepted 26 May 2013 Abstract Increasingly competitive market environments have forced not only large manufacturing, but also smalland-medium size enterprises (SME) to look for means to improve their operations in order to increase competitive strength. This paper presents an adaptation and adoption by a UK SME engineering service organisation, of lean management, industrial engineering, and automation metods developed within larger organisations. This SME sought to improve the overall performance of one of its core testing processes. An exploratory analysis, based on the lean management concept of “value added” and work measurement technique “time study”, was developed and carried out in order to understand the current performance of a testing process for gas turbine fuel flow dividers. A design for the automation of some operations of the testing process...

Words: 5972 - Pages: 24

Premium Essay

Linear Programming of Basic Economic Parameters Used at Reengineering in Small and Medium Enterprises

... 1. INTERNATIONAL JOURNAL OF MANAGEMENT (IJM) International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 – 6510(Online), Volume 4, Issue 2, March- April (2013)ISSN 0976-6502 (Print)ISSN 0976-6510 (Online)Volume 4, Issue 2, March- April (2013), pp. 31-43 IJM© IAEME: www.iaeme.com/ijm.asp ©IAEMEJournal Impact Factor (2013): 6.9071 (Calculated by GISI)www.jifactor.com LINEAR PROGRAMMING OF BASIC ECONOMIC PARAMETERS USED AT REENGINEERING IN SMALL AND MEDIUM ENTERPRISES Prof. Dr Slobodan Stefanović High School of Applied Professional Studies, Vranje, Serbia Prof. Dr Radoje Cvejić Faculty for strategic and operational management Belgrade, Serbia ABSTRACT In economic terms, linear programming is a mathematical technique used for selecting one among more possible economic decisions that will have the greatest efficiency. Most production issues have been solved by a linear programming method, also performed here, and a model of linear programming of economic parameters in re- engineering of small and medium enterprises, for their greater efficiency, is presented. Key words: linear programming, re-engineering, economic parameters, model. 1.0. INTRODUCTION Linear programming is a mathematical method for selecting an optimal solution among larger number of possible solutions. In mathematical terms, linear programming is a mathematical analysis of optimum problem. These are mathematical methods used for seeking the maximum (or minimum) value of a linear function, with previously...

Words: 4403 - Pages: 18

Premium Essay

Lean

...MSRSAS - Postgraduate Engineering and Management Programme - PEMP Module Code Module Name Course Department EMM515 Lean Operations and Management of Lean Organizations M.Sc. in Engineering and Manufacturing Management Mechanical and Manufacturing Engg . Name of the Student Reg. No Batch Module Leader Liju G BUB0912004 Full-Time 2012. SANDEEP. N M.S.Ramaiah School of Advanced Studies Postgraduate Engineering and Management Programmes(PEMP) #470-P, Peenya Industrial Area, 4th Phase, Peenya, Bengaluru-560 058 Tel; 080 4906 5555, website: www.msrsas.org POSTGRADUATE ENGINEERING AND MANAGEMENT PROGRAMME – (PEMP) ASSIGNMENT i Declaration Sheet Student Name Reg. No Course Batch Module Code Module Title Module Date Module Leader LIJU G BUB0912004 EMM Full-Time 2012 EMM515 Lean Operations and Management of Lean Organization 13-05-2013 SANDEEP. N to 15-06-2013 Batch Full-Time 2012 . Declaration The assignment submitted herewith is a result of my own investigations and that I have conformed to the guidelines against plagiarism as laid out in the PEMP Student Handbook. All sections of the text and results, which have been obtained from other sources, are fully referenced. I understand that cheating and plagiarism constitute a breach of University regulations and will be dealt with accordingly. Signature of the student Submission date stamp (by ARO) Date 15-06-2013 Signature of the Module Leader and date Signature of Head of the Department...

Words: 9715 - Pages: 39

Premium Essay

The Role of the Engineer in the Value Chain

...Engineer in the Value Chain 49680: Value Chain Engineering Systems Assignment 1 LE Ngoc Thang 11187604 Table of Contents 1. Summary 5 2. Introduction 6 3. Value Chain 7 4. Engineering in Value Chain 9 4.1 Inbound Criterions 10 4.2 Warehouse management Criterions 11 4.3 Logistics Operation Specifications Criterions 11 5. Conclusion 14 6. Reference 15 Table of Figures Figure 1 Supply chain of a Router 7 Figure 2 Engineering Value Chain model 9 Summary This report focuses on the key component of a business, which is Value Chain. Value Chain, as Michael Porter's definition is those activities that add value to the products and/or service provided by the company. Additionally, to achieve advantages over competitors, those activities should be run at an optimized level with careful research and strict supervision. In the first part, Supply Chain and Demand Chain are researched and in the second part, a particular industry sector will be taken into consideration to shed light on the role of engineering and by that reveal the importance of engineering in the management of Value Chain. (Porter 1985) Introduction Nowadays enterprises are facing a number of issues to maintain and expand their business. With those that manufacture goods or provide services should be aware of the importance of Value Chain in order to deeply know the flow of raw material from suppliers to end-users for example. This report gives a brief view over Value Chain system and Engineering roles. Value...

Words: 1541 - Pages: 7

Premium Essay

Differing Perspectives on Quality

...QUESTIONS What Is Quality? 1. Which of the following is not one of Garvin’s “definitions” of quality? a. transcendent b. value-based c. manufacturing-based d. user-based e. cost-based ANSWER: e; DIFFICULTY: moderate 2. According to Garvin’s __________ definition of quality, quality is conformance to the design specifications. a. transcendent b. manufacturing-based c. user-based d. product-based e. value-based ANSWER: b; DIFFICULTY: moderate 3. According to Garvin’s __________ definition of quality, quality is found in the components and attributes of a product. a. manufacturing-based b. value-based c. user-based d. transcendent e. product-based ANSWER: e; DIFFICULTY: moderate 4. Garvin’s __________ definition of quality states that if the customer is satisfied, the product has good quality. a. product-based b. user-based c. value-based d. manufacturing-based e. transcendent ANSWER: b; DIFFICULTY: moderate 5. Which of the following choices correctly matches one of Garvin’s definitions of quality with its explanation? a. manufacturing-based definition— quality is found in the components and attributes of a product b. value-based definition— if the product is perceived as providing good value for the price, it has good quality c. user-based definition— if the product conforms to design specifications, it has good quality ...

Words: 4418 - Pages: 18

Premium Essay

The Role of the Engineer in the Value Chain

...The Role of the Engineer in the Value Chain Executive Summary In the recent past, value chain management has undergone radical transformation through various stages of automation, optimization and integration. This is based on a variety of reasons such as shortened technology and product development lifecycles, globalization, and pressures of competitive forces. This has forced organizations to review their value chain systems in order to survive and grow in such dynamic economic environments. In the field of engineering, value chains have become vital aspects of operations management when it comes to the application of engineering systems to the industrial and commercial processes. The main purpose of this paper is to disentangle the role of the engineer in the value chain. In this context, it will go further in analyzing the key elements of value chain and any accrued benefits that come with use of engineers in the value chain management.   Value Chain Analysis The inception of Value Chain is associated with Michael Porter. He gives his understanding to this concept using a model he referred to as; “Porter’s value chain model” (Sekhar, 2009: 115). This model evaluates the strategically vital activities in a firm that boost its competitive advantage. Such competitive advantage is usually achieved through the core competencies of the firm. According to Porter, a firm is defined by a set of processes and functions which he classified into five main activities; the inbound...

Words: 1567 - Pages: 7

Premium Essay

Asia Pacific Aviation Competitive Challenges & Growth Dynamics

...International Conference on Economics, Social Science, Arts, Education and Management Engineering (ESSAEME 2015) Study on trade-off of time-cost-quality in construction project based on BIM XU Yongge 1, a, Wei Ya 1, b 1 Xi’an Univ.of arch.﹠Tech., Xi’an 710055, China; a 15829690177@163.com, b631931577@qq.com Keywords: Building information modeling; Construction project; Time-cost-quality trade-off optimization; Genetic algorithm. Abstract. With the development of BIM technology, BIM provides a new direction for the project management of three objectives. Based on the current situation of the project time cost-optimized mass balance studies, pointing out the implementation mechanism of achieving the trade-off of time-cost-quality in construction project based on BIM mainly oriented components of the BIM model based; the use of Structured Query Language query statistics data information needs combined bill of quantities calculation method for the specification, preliminary engineering scale generation; establishment of Project relations system model. In the process duration is subject, for the construction of uncertainty factors such as interest rates and prices, through the establishment of quality, cost and schedule function, the establishment of quality balanced schedule cost optimization model, using genetic algorithm model of the optimal solution are obtained. With BIM case finally proves the rationality of the model and the effectiveness of the...

Words: 2798 - Pages: 12

Premium Essay

Management

...Mathematics for Engineering Technicians Electrical and Electronic Principles Data Communications and Networks Analytical Methods for Engineers Engineering Science Telecommunication Principles Advanced Mathematics for Engineering Electrical and Electronic Principles Business Management Techniques for Engineers Computer Programming Techniques Radio Communication Engineering Electronic Principles Principles and Applications of Microcontrollers Digital and Analogue Devices and Circuits Management of Projects Project Design, Implementation and Evaluation Personal and Professional Development Work-based Experience Credit Hours 10 10 15 15 15 15 15 15 15 15 20 15 15 15 15 20 15 15 Unit Level 3 3 4 4 4 5 5 5 4 4 4 5 4 5 5 5 5 5 Semester 1 (10 weeks) September- November 2014 101 119 001 Semester 2 (10 weeks) December- February 2014 002 118 059 Semester 3 (10 weeks) March - May 2014 005 007 112 Semester 4 (10 weeks) June - August 2015 120 039 113 Semester 5 (10 weeks) September-November 2015 117 037 Semester 6 (10 weeks) 003 December 2015 -February 2016 027 029 Industrial Training March 2016 - September 2016 UNIT 1: ANALYTICAL METHODS FOR ENGINEERS Unit 1: Unit code: QCF level: Credit value: Analytical Methods for Engineers A/601/1401 4 15 • Aim This unit will provide the analytical knowledge and techniques needed to carry out a range of engineering tasks and will provide a base for further study of engineering mathematics...

Words: 26988 - Pages: 108

Premium Essay

Uts Finance

...finance is the field of finance which deals with financial decisions that business enterprises make and the tools and analysis used to make these decisions. The task of a finance manager mainly includes dealing with money i.e. how to raise the money required and how to use or allocate the money keeping in mind the maximization of shareholder value as the goal. Corporate finance has three main areas of concern: * Capital Budgeting: What long-term investments should the firm take? * Capital Structure: Where will the firm get the long-term financing to pay for its investments? Also, what mixture of debt and equity should it use to fund operations? * Working Capital Management: How should the firm manage its everyday financial activities to smoothly operate the business? The finance manager takes the decisions for the above areas of concerns keeping in mind the goal of financial management. The goal of financial management in a for-profit business is to make decisions that increase the value of the stock, or, more generally, increase the market value of the equity. There is the possibility of conflicts between stockholders and management in a large corporation. These conflicts are called agency problems. For Corporate Finance Assignment Help you can fill upload your assignment form or you can mail us at assignment.locus@gmail.com Other Recommended Pages :- * Expert Assignment Help * Ratio Analysis Assignment Help * Operating Systems Assignment and Project Help ...

Words: 422 - Pages: 2

Premium Essay

Rondell Team Paper

...organizational design and culture are evident in analyzing the case study of the Rondell Data Corporation. By exploring the background of the problem, information regarding organizational functioning, the impact of organizational culture on the strategy and success of the company, and problem identification, recommendations can be offered. Possible solutions to the current dilemma at Rondell Data Corporation will provide an increased understanding of the role of organizational structure related to the improvement and overall performance of a company. Background Bob Rondell started the Rondell Data Corporation in 1920. The basis for its inception was Rondell’s invention of several electrical testing devices, while on staff as an engineering faculty member of a large university. In 1947, the company entered into the radio broadcasting equipment market. By the early 1960’s, the company had increased its business to include data transmission equipment. The company had a reputation of being a source of high quality innovative designs and described itself as being able to “convert problems to solutions” in their sales brochures. By 1978, two major lines were recognized: broadcast equipment and data transmission. Broadcast equipment accounted for 35% of the company sales. Data transmission was also blossoming with increased demand for highly specialized and innovative designs. The size of the original payroll in 1920 is unknown, but as of 1947, Rondell Corporation...

Words: 3274 - Pages: 14

Premium Essay

Analysis of Rim

...This paper described the methods of SWOT analysis and Value Chain Analysis. SWOT analysis was presented as a technique for assessing the fit of a business within its operational environment by looking at the strengths, weaknesses, opportunities and threats. Comparing a competitor’s SWOT analysis with one’s own can reveal insight into where competitors are stronger and weaker and guide strategic decisions. The Value Chain Analysis was presented as a technique to identify which activities can create or improve economic advantage for a company. Using the value chain analysis within a competitive intelligence framework, a company can get insight into competitors’ cost structure and differentiation strategy as well as changes to these strategies. One can then compare the competitor’s value chain analysis with its own to discover opportunities for acquisition or where improvements within the value chain can be completed. Finally, both methods were used within an intelligence project to analyze RIM and provide recommendations to Alpha. Add real value Dedication, determination and attention to detail are hallmarks of RIM Global Manufacturing. It is comprised of a number of teams, ultimately responsible for the effective and timely manufacture, assembly, repair and delivery of the company’s products, supporting our customers around the world. Using cutting-edge technology and equipment, our state-of-the-art manufacturing facility is located in Waterloo, Canada, and is fully carpeted and...

Words: 411 - Pages: 2

Premium Essay

Talent Acquisition Case Study

...GLOBAL SOLUTION Page 1 GURU NANAK DEV ENGINEERING COLLEGE, BIDAR A STUDY ON TALENT ACQUISITION Submitted by- N.PALLAVI USN-3GN13MBA20 Submitted to- VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELGAUM In partial fulfillment of the requirement for the award of the degree of MASTER OF BUSINESS ADMINISTRATION UNDER THE GUIDANCE OF INTERNAL GUIDE EXTERNAL GUIDE Prof. KALYANRAO MR.NIKHIL SHESAPPA Dept. of MBA Senior manager HGS Department of MBA Guru Nanak Dev Engineering College, Bidar July 2015 TALENT ACQUISITION HINDUJA GLOBAL SOLUTION GURU NANAK DEV ENGINEERING COLLEGE, BIDAR “A Study on Talent acquisition” ON PROJECT REPORT ON Submitted By N.Pallavi MBA IV SEMESTER USN-3GN13MBA20 Page 2 TALENT ACQUISITION HINDUJA GLOBAL...

Words: 9848 - Pages: 40

Premium Essay

Market Segmentation and Product Positioning

...living and dynamic guide for the operation of Grey Matter Solutions, LLC. Grey Matter Solutions, LLC is a single location home-based engineering and information technology business offering strategic technical and program management solutions. It is the owner’s intention to expand the business so that it becomes a solid, highly-profitable venture and the operation can be supported year around. The main purpose of Grey Matter Solutions, LLC is to offer a wide range of engineering and information technology services that will meet the needs and offer solutions for individuals, business and government clients. Grey Matter Solutions, LLC will not only collect and process information, but will seek to education its clients at the same time so that the best strategies are employed at all times. Mission Statement Grey Matter Solutions, LLC is a full-service engineering and information technology services business located in Anne Arundel County, MD. The business provides engineering, systems analysis, systems integration and technical services for governmental agencies, and at the federal, state and local levels throughout the United States. From program process improvements, program management to onsite and hands-on engineering consulting, Grey Matter Solutions is committed to being your one-stop quality service meeting all your engineering and information technology needs. Grey Matter Solutions maintains honesty and integrity at the utmost level where we strive to achieve...

Words: 1148 - Pages: 5

Premium Essay

Value Engineering

...Luiz Felippe Alcantara Systems Engineering Management March 2, 2015 Dr. Bill Phillips Value Engineering Value engineering is a methodology developed by Lawrence Miles for manufactories during World War II, to improve efficiency and decrease cost. Value is defined as a ratio of function and quality over cost, the value can be increased by reducing the cost or improving the function. In the construction industry the value engineering is common used to bring over budged back to the project budget. However simply reducing cost either quality is not a value engineering is a simple cost cutting. Value engineering is a multi-perspective team approach to study one product or project and improve it by using alternative design, materials and methods and still achieve the essential functions, requirements and purpose. VE can be applied at any point in a project. However when it is have been used since the begging higher is the return in time and effort invested. There are five main stages in a VE application: Information – Gather all information important for the project. Is done at the initial stage and define the owner objectives, what functions or characteristics are important for the project. It will asks what does the project do, what must it do, what should it do, what could it do, what must it not do, and who it will be accomplished? Creation – The VE team will list all creative ideas The VE Team thinks of as many ways as possible to provide the necessary...

Words: 438 - Pages: 2