...SECONDARY RESEARCH ON “WASHING MACHINE” A dissertation submitted to: Dr. Bejoy John Thomas, MBA, NET (Qualified), M.Phil.Ph.D., In partial fulfillment of the requirements for the award of the degree MASTER OF BUSINESS ADMINISTRATION BY SUJANABENAZIR.M Jamal Institute of Management, (Approved by AICTE, Newdelhi) Jamal Mohamed College (Autonomous) Tiruchirappalli-620020 1 INDUSTRY INFORMATION 2 1: GROWTH AND EVOLUTION OF THE WASHING MACHINE INDUSTRY IN INDIA:Washing machines made their mark in the Indian market in the eighties. Videocon was the first company in India to introduce washing machines. Over the years, it has remained a market leader, with a overall market share of 35% by adopting flexible strategies, which are modified as and when the need arises. Initially, the challenge was to wean away homemakers from their traditional methods of washing clothes. But then, owing to high prices, the market appeared to be limited only to upper income urban households. The 1990s saw a changein the socio-economic scene in the country. Rapid growth, increase in the number of working women, changing life styles and higher aspiration levels with exposure to satellite television and easy consumer finance meant that demand for consumer goods rose phenomenally. Sales of semi-automatics outstrip those that in the fullyautomatic segment. This has been due to a variety of factors, price being one of them. As semi-automatic washing machines are cheaper than the fully automatic...
Words: 4463 - Pages: 18
...Demand Quantification for Fuel Requirements, Energy Source, Conversion Technology and Siting, and Powerplant Design in the Province of Iloilo Design Paper by Gino P. Jardinico BS Mechanical Engineering Student: 2011-15731 Submitted to the Department of Mechanical Engineering College of Engineering University of the Philippines In Partial Fulfilment of the Requirements of ME 188 Power Plant Engineering Department of Mechanical Engineering College of Engineering University of the Philippines Diliman Quezon City December 2015 ii Abstract The study is aimed (1) to quantify the demand for fuel requirements and powerplant capacity in the province of Iloilo for the next 30 years, and (2) prioritize the energy sources, conversion technologies and powerplant sites available in the province. Electricity consumption from the five sectors (residential, commercial, transportation, industrial, and agricultural) were calculated using different models and assumptions. These values were projected to the year 2045 in order to predict the total electricity demand on the daily, weekly, monthly and yearly bases. There is an average of 262.28 MW demand from the computed consumptions which was translated to fuel requirements considering the existing, upcoming, decommissioning, and the reserve. A total of 284.77 MW plant capacity was calculated for 2045. Assuming that bituminous coal will be used as the main fuel for running a Coal-fired powerplant in the future, a fuel requirement of 12.25...
Words: 16888 - Pages: 68
...Company. Confidential and proprietary. Agenda Part 1 : « Market Research » Market and Nielsen Part 2 : Retailer Panel Part 3 : Consumer Panel Part 4 : How to use Panels ? Framework 2 PART 1A : THE «MARKET RESEARCH» MARKET Catherine SECLET April 24th 2014 Copyright ©2012 The Nielsen Company. Confidential and proprietary. MARKET RESEARCH INSTITUTES MISSION To provide clients with all data and information required to be able to take best marketing and commercial decisions To Understand requirements, opinions and behaviors on Markets To Propose a reading sheet for the society, understand social behaviors, and understand markets evolutions - - 4 Copyright ©2012 The Nielsen Company. Confidential and proprietary. MAIN COMPANIES IN FRANCE : • Turnover = around 2 milliards € • How many people engaged in Market research sector : 11 300 • • • • • • • • • • • • • • nielsen, TNS Secodip Worldpanel (Kantar group) IMS, IRI, GFK, NPD, IPSOS, IFOP, TNS Sofrès, Research International, Millward Brown, BVA Médiamétrie … 5 Copyright ©2012 The Nielsen Company. Confidential and proprietary. MARKET RESEARCH SECTOR SPLIT IN 3 : QUALITATIVE SURVEYS: (15%), QUANTITATIVE SURVEY (AD HOC SURVEYS): (52%) PANELS SURVEYS AND CONTINUOUS TRACKING (33%). Source: Syntec NIELSEN WORKS ON THESE 3 PARTS, BUT OUR CORE BUSINESS IS PANELS, BOTH RETAILER AND CONSUMER PANELS. MARKET RESEARCH OVER EACH ACTIVITIES, BUT MAINLY ON FAST MOVING GOODS (FOOD, DRINKS...
Words: 8422 - Pages: 34
...Appendix 3: Conf iguring Domain Controller using DCPROMO ....................................... 36 Appendix 4: Installing Dynamic Host Configuration Protocol (DHCP) ............................ 49 Appendix 5: Inst alling Microsoft Windows Deployment Services .................................... 56 Appendix 6: Configuring Microsoft Windows Deployment Services ................................ 60 Appendix 7: Imaging client machine ................................................................................. 67 Page 1 Capstone Report Summary (Introduction) My Capstone Project is about Microsoft Windows Deployment Services (WDS). W DS is a service, installed on Microsoft Windows Server 2003, 2008, and 2008 R2, which allows administrators to deploy Microsoft Windows XP, Vista, and 7 to multiple client computers, using network-based installation. WDS can also be used to deploy applications while the system is being imaged. This project will accomplish the followin...
Words: 9702 - Pages: 39
...CASES IN FINANCIAL MANAGEMENT SYLLABUS FIN 522 Professor James A. Gentry Cases In Financial Management 343M Wohlers Hall Spring Semester 2009 333-7995 2043 BIF j-gentry@uiuc.edu Office Hours: 10:30 a.m. to 11:45 a.m. on Mon. and Wed/. or by Appointment I. Teaching Objectives Financial decision making cases are used to… • Create a highly interactive learning environment; • Learn about the application of financial management and credit analysis concepts; • Discover what you do not know about the practice of financial management; • Show what you have learned; • Highlight the relationships between strategic goals and the creation of firm value; • Develop techniques for interpreting a firm’s financial data and strategic plans; • Enhance your critical thinking and problem solving skills; • Expand your understanding of financial theory and its application; • Improve your listening and cooperative learning skills. II. Learning Promises At the end of this course your will be able to… • Think like a financial manager; • Interpret a company’s financial health by evaluating the performance...
Words: 5389 - Pages: 22
...Branch Finance Manager ITC Limited, Bangalore. Mr. Vineeth Vishwambharam Asst. Branch Manager ITC Limited, Bangalore M.P.Birla Institute Of Management D C B B @ 9 8 7 5 E¦¢#A¦©§64 ¡2 1 £( ¡ % ¡ " ¡ £ ¨ ¡ ¥ £ ¡ 3'¦0)'&¤$#¦!¤¡ ©§¦¤¢ DECLARATION I hereby declare that the research work embodied in the dissertation entitled “Dynamics of supply chain management at ITC Ltd., Bangalore “ has been carried out by me under the guidance and supervision of Dr. N.S.Malavalli, Principal,M.P.B.I.M , Bangalore (Internal Guide) and Mr. Savio ,Branch Finance Manager,ITC Ltd. ,Bangalore (External Guide). I also declare that the dissertation has not been submitted to any University/Institution for the award of any Degree/Diploma. Place: Bangalore Date: (T.Lakshmi) ACKNOWLEGEMENT I thank V.S.Vaidhyanathan,Sr. Vice President Corporate Affairs ITC Ltd. Delhi, and Mr. Thomas Mathew ,H.R Manager of ITC Ltd. Bangalore, for giving me an opportunity to do research in their company. I extend grateful thank to Mr.Vineeth Vishwambharam, Asst Branch Manager and Mr.Savio Suverrie, Finance Manager, ITC Ltd who provided expert guidance throughout this research work. My special thanks are due to Mr.Arjun Bhatia, Mr.Kiran and Mr. Arun for their personal interest and support. I express my immense gratitude to Dr.N.S.Mallavali & Dr.K.V.Prabhakar for their academic support.. Further, I indebted to all those who explicitly and implicitly helped me in completing my work...
Words: 14660 - Pages: 59
...Southern New Hampshire University Investigative Report The Capital Structure of Microsoft Corporation Zhang Yue Capital Budgeting & Financing, Fin 630 David Fehr June 3rd, 2013 Abstract At the first part, we are going to introduce Microsoft Corp. and how it works. Then, we try to figure out the WACC of Microsoft based on the data like income statements, balance sheets, cash flow statements, and some data searched from Yahoo! And Google Finance. At last, we are going to analyze and evaluate several terms of Microsoft. Compare Microsoft performance to Apple and Google, which are the most famous technology and Internet company, and then discuss with the whole technology market. Key Words: capital structure, WACC, ROE, leverage, liquidity, 1. Introduction 1.1 Company Background Microsoft Corporation is an American multinational software corporation headquartered in Redmond, Washington that develops, manufactures, licenses, and supports a wide range of products and services related to computing. This company was founded by Bill Gates and Paul Allen in 1975. With about four decades of development, now Microsoft is the world's largest software maker measured by revenues. It is also one of the world's most valuable companies. As of 2013, Microsoft is market dominant in both the PC operating system and office suite markets. The company also produces a wide range of other software for desktops and servers, and is active in areas including internet search...
Words: 3736 - Pages: 15
...Industries Md. Rezaul Hasan Shumon, Kazi Arif-Uz-Zaman and Azizur Rahman Dept. of Industrial Engineering and Management Khulna University of Engineering and Technology Khulna, Bangladesh Abstract The apparel industries must produce momentous quantities in shorter lead times. Apparel product is highly correlated with high level of productivity; sewing line should be balanced in shorter possible time and effective way for each style and quantity. The focal constraint against the higher productivity is the difference in individual capacity which is the mode of improper line balancing and bottle neck process. This paper is based on an effective layout model where to hit upon the bottleneck process through benchmark capacity and led us to use balancing process using two separate concept of manufacturing processes- modular line and Traditional system both together. The research shows that this balanced layout model has increased the efficiency by 21%, and labor productivity by 22%. Keywords Scheduling, Line Balancing, Bundle system, Modular Line. 1. Introduction Since the late 1970s, the RMG industry started developing in Bangladesh primarily as an export-oriented industry and the domestic market for RMG has been increasing fast due to increase in personal disposable income and change in life style. The sector rapidly attained high importance in terms of employment, foreign exchange earnings and its contribution to GDP. Since buyer comes to this region for the lowest labor price ($0...
Words: 2673 - Pages: 11
...Concrete Repair, Rehabilitation and Retrofitting II – Alexander et al (eds) © 2009 Taylor & Francis Group, London, ISBN 978-0-415-46850-3 Performance of Reactive Powder Concrete (RPC) with different curing conditions and its retrofitting effects on concrete member T.P. Chang, B.T. Chen, J.J. Wang & C.S. Wu Department of Construction Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, ROC ABSTRACT: The material performance of Reactive Powder Concrete (RPC) with two different curing conditions, water-curing of 25ºC and steam-curing of 85ºC and 95% relative humidity, were studied experimentally. The reinforcing effects of the RPC with two wrapping thicknesses of 10 and 15 mm, respectively, on the surface of cylindrical concrete specimen were evaluated. Major experimental results show both the engineering properties and indices of durability of RPC with steam-curing at four different ages have substantially increased except for the supersonic pulse velocity and dynamic moduli of elasticity and shear. The ratio of increase of compressive strength of cylindrical specimens retrofitted with 10 and 15 mm of wrapping RPC are in the range of 9.5 to 38.0%. 1 INTRODUCTION Reactive powder concrete (RPC), a cement-based composite material well known for the ultra-highstrength, high-durability and low-porosity, made its international debut in 1994 (Richard, 1994). The advance mechanical and physical properties of RPC are obtained by optimizing...
Words: 3329 - Pages: 14
...Copyright, Intellectual Property, and Innovation Computer Literacy Instructor DATE In today's society, how does copyright, intellectual property, and innovation play a key role in our everyday lives? With today's technological advancements, there are many laws, rules, and regulations that can apply to everyday life. If we are not careful with online behavior, it's possible that we could be breaking several of these laws. The intent of this research paper is to inform the reader of these laws, how to abide by them, and the repercussions if any are violated. Copyright is defined as the exclusive right to make copies, license, and otherwise exploit a literary, musical, or artistic work, whether printed, audio, video, etc.: works granted such right by law on or after January 1, 1978, are protected for the lifetime of the author or creator and for a period of 50 years after his or her death (dictionary.com). On October 28, 1998, so around twenty years later, the Digital Millenium Copyright Act or DMCA was signed into law by President Clinton. This law implemented two World Intellectual Property Organization treaties, but we will discuss that later. The DCMA also addressed several significant copyright related issues. Today, a majority of issues deal with the DCMA as we live in a advanced technical and social web based world. Because of the massive amount of digital media that is available to us, it is important to understand the laws and implications of those laws...
Words: 1489 - Pages: 6
...Preventive Dentistry An in vitro evaluation of electric toothbrushes B. S. Khambay*/A. D. Walmsley^* Fotir cotnmercially avaiiable electric toothbrushes (Sonieare, Braun Electric Toothbrush, Interplak, and Blend-a-Dent) »ere assessed both for their operating characteristics and their ability to retnove a 'food debris " medium. The Sonieare and Blend-a-Dent have a lateral vibrator)' action, while the Interplak and Braun produce a rotary movement of the brush head. The vibratory action of the Sonieare was susceptible to loading. All devices produced both stable-pulsating cavitation and acoustic tnicrostreaming that was demonstrated in vitro using a suspension of particles in water Their effectiveness in removing a food debris medium was assessed with and without water Three of the brushes (Sonieare, Braun, and Blend-aDent) were simitar in their abllit}- to remove the placjue, and all were superior to the Interplak: its streaming forces removed no food debris. The results indicated that the Blend-a-Dent was the most effective brush design in vitro, although the differences between Blend-a-Dent and Sonieare were not statistically significant. (Quintessence Int 1995:26:841-848.) Introduction Electric toothbrushes have become established as an effective alternative to manual methods of toothbrushing. The mode of action of these brushes is designed to simulate manual methods and as such is attractive to the population as an easy and simple method of brushing teeth. The use...
Words: 3833 - Pages: 16
...Introduction In this case Boeing faces a number of challenges in determiningthe viability of bringing forth the 7E7 aircraft series. Aircraft manufacturersbringing forth a new product has to take extra care since a miss in this assessment can place a company in a position to fail the result of huge cash outflows required. Boeing faced stiff competition from French based Airbus and had not brought forth a successful new product in recent years. Since the September 11th attacks travel had taken a drop in general and Boeing was making assumptions regarding future needs and opportunities. This included the willingness of travelers to pay 5% more for efficiency and the increase of hub and spoke travel for airlines requiring flexibility in mid-sized aircraft. To assess the validity of the 7E7 series extra care will be taken to look at all the measurements to reduce the risk inherent in new product introductions in the aircraft business. Question 1 a. What is an appropriate required rate of return against which to evaluate the prospective IRRs from the Boeing 7E7? Please use the capital asset pricing model to estimate the cost of equity. At the date of the case, the 74-year equity market risk premium (EMRP) as estimated to be (see below). Which beta and risk-free rate did you use? Why? Applying the Capital Asset Pricing Model estimate the required rate of return for Boeing equity for the last 74 years: RBA= RF+ β(RM-RF)in which: * Market Risk Premium 74 year period...
Words: 3183 - Pages: 13
...person. Where provided to you in electronic format, you may only print from it for your own use in the relevant course of instruction. Failure to comply with the terms of this warning may expose you to legal action for copyright infringement and/or disciplinary action. GENERAL INFORMATION COURSE DETAILS | Course Title | BUS7333 Strategic Management | Level | 7 | Credit Value | 20 Credits | Duration | 13 weeks | Learning Hours | 200 hours, including approximately 10 hours per week of self-study in your own time to complete the course requirements | Course Delivery | Lectures, Tutorials, Group Work, Project Work and Self-Directed Learning | Passing Criteria | * All assessments must be completed * A minimum of 40% in an assessment worth 40% or more of the total mark AND * An overall course grade of 50% across all assessments | Attendance | We strongly recommend that you attend 100% of lectures and tutorials. To be eligible for any form of assistance with your studies outside of class time, Whitireia New Zealand requires you to attend a minimum of 80% of lectures and tutorials.If you are going to be absent from class, you must advise your teacher and if you wish to be granted approved leave, you must apply to your Programme Manager within ten (10) days and provide valid evidence. If you do not provide valid evidence you will be recorded as absent. Examples of valid evidence include but are not limited to: NZ registered doctor’s certificate; death...
Words: 4495 - Pages: 18
...APPLICATIONS OF ELECTRON MICROSCOPY IN MATERIALS AND METALLURGICAL ENGINEERING A TERM PAPER PRESENTED IN PARTIAL FULFILMENT OF THE REQUIREMENTS FOR THE POSTGRADUATE COURSE MME 604 [ELECTON OPTICS AND MICROSCOPY] BY MARK, UDOCHUKWU 20044449298 SUBMITTED TO ENGR. PROF. O. O. ONYEMAOBI [EXAMINER] DEPARTMENT OF MATERIALS AND METALLURGICAL ENGNEERING FEDERAL UNIVERSITY OF TECHNOLOGY, OWERRI AUGUST 2005 i Markudo [2005] PREFACE The electron microscope is an indispensable modern analytical and research tool. Microscopy is employed in all branches of science to identify materials, characterize unknown substances or study the properties of known materials. This term paper surveys the applications of electron microscopy in the field of materials and metallurgical engineering. I hereby acknowledge my lecturer on Electron Optics and Microscopy (MME 604), Engr. Prof. O. O. Onyemaobi. He has been sharpening my research and writing skills since my undergraduate days. This is the third term paper I will be submitting to him. ii TABLE OF CONTENTS Title Page Preface Table of Contents CHAPTER ONE 1.0 1.1 1.2 1.2.1 1.2.2 1.2.3 Introduction Materials and Metallurgical Engineering Microscopes and Microscopy Levels of Structure Methods of Structural and Compositional Elucidation Microscopy i ii iii-v 1-12 1 1 3 4 6 8 13-24 13 13 14 16 17 18 19 21 CHAPTER TWO 2.0 2.1 2.2 2.3 2.3.1 2.3.2 2.3.3 2.3.4 Transmission Electron Microscopy Interaction of Electrons...
Words: 11775 - Pages: 48
...Available online at www.sciencedirect.com Biotechnology Advances 26 (2008) 246 – 265 www.elsevier.com/locate/biotechadv Research review paper Biological degradation of plastics: A comprehensive review Aamer Ali Shah ⁎, Fariha Hasan, Abdul Hameed, Safia Ahmed Department of Microbiology, Quaid-i-Azam University, Islamabad, Pakistan Received 22 November 2007; received in revised form 31 December 2007; accepted 31 December 2007 Available online 26 January 2008 Abstract Lack of degradability and the closing of landfill sites as well as growing water and land pollution problems have led to concern about plastics. With the excessive use of plastics and increasing pressure being placed on capacities available for plastic waste disposal, the need for biodegradable plastics and biodegradation of plastic wastes has assumed increasing importance in the last few years. Awareness of the waste problem and its impact on the environment has awakened new interest in the area of degradable polymers. The interest in environmental issues is growing and there are increasing demands to develop material which do not burden the environment significantly. Biodegradation is necessary for water-soluble or water-immiscible polymers because they eventually enter streams which can neither be recycled nor incinerated. It is important to consider the microbial degradation of natural and synthetic polymers in order to understand what is necessary for biodegradation and the mechanisms involved. This...
Words: 16925 - Pages: 68
