Define hostname It is very useful define the name of your Cisco switch/router. To do it: Enable administrative privilege Router>en Enter the configuration mode: Router#configure terminal Define the hostname (the name router is changed to Ciscozine) Router(config)#hostname Ciscozine Ciscozine(config)# Assign the privileged level secret The enable secret password allows you to enter enable mode (sometimes referred to as privileged mode or privileged-EXEC mode). To set a secret password:
Words: 621 - Pages: 3
eloading a Rout and S g ter Switch (Instructo or Version) V Instructor No Red font color or Gray highlights ind ote: y dicate text tha appears in the instructor copy only. at Topology T Objectives O Part 1: Se Up Device in the Netw et es work as Show in the To wn opology Part 2: Initialize the Router and Reload R Part 3: Initialize the Switch and Reload S Backgroun / Scenar B nd rio Before sta arting a CCNA hands-on la that makes use of either a Cisco rout or switch, ensure that t A ab s ter
Words: 1278 - Pages: 6
Configuring Basic Switch Settings Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway S1 VLAN 99 192.168.1.2 255.255.255.0 192.168.1.1 PC-A NIC 192.168.1.10 255.255.255.0 192.168.1.1 Objectives Part 1: Cable the Network and Verify the Default Switch Configuration Part 2: Configure Basic Network Device Settings Configure basic switch settings. Configure the PC IP address. Part 3: Verify and Test Network Connectivity Display device configuration. Test
Words: 4660 - Pages: 19
This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and exclusive use by instructors in the CCNA Exploration: LAN Switching and Wireless course as part of an official Cisco Networking Academy Program. PT Activity 1.2.4: Build a Hierarchical Topology Topology Diagram Learning Objectives • • Add devices to a topology. Connect the devices. Introduction Packet Tracer is integrated throughout this
Words: 48601 - Pages: 195
Switching: Routing and Switching Essentials Instructor Lab Manual This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and exclusive use by instructors in the CCNA Security course as part of an official Cisco Networking Academy Program. Lab L - Initializing and Re g eloading a Rout and S g ter Switch (Instructo or Version) V Instructor No Red font color or Gray highlights ind ote: y dicate text tha appears
Words: 45682 - Pages: 183
Lab - Configuring a Switch Management Address * Topology Addressing Table Device | Interface | IP Address | Subnet Mask | Default Gateway | S1 | VLAN 1 | 192.168.1.2 | 255.255.255.0 | N/A | PC-A | NIC | 192.168.1.10 | 255.255.255.0 | N/A | Objectives Part 1: Configure a Basic Network Device Cable the network as shown in the topology. Configure basic switch settings including hostname, management address, and Telnet access. Configure an IP address on the PC. Part 2: Verify and Test
Words: 1896 - Pages: 8
Lab – Configuring Basic Switch Settings Topology Addressing Table Device | Interface | IP Address | Subnet Mask | Default Gateway | S1 | VLAN 99 | 192.168.1.2 | 255.255.255.0 | 192.168.1.1 | PC-A | NIC | 192.168.1.10 | 255.255.255.0 | 192.168.1.1 | Objectives Part 1: Cable the Network and Verify the Default Switch Configuration Part 2: Configure Basic Network Device Settings Configure basic switch settings. Configure the PC IP address. Part 3: Verify and Test Network Connectivity
Words: 4262 - Pages: 18
| Switch Configuration | | | Amanda Robertson | 4/20/2014 | | I was Hired By a company as a network engineer. One of my first jobs was to purchase, install, configure and deploy a Cisco Catalyst 2960-S Series Switches. This is a popular choice with the LAN Base Software, which comes with the switches. I found that this switch would be compatible with the companies needs having 48 ports, POE configurations that offer up to 15.4w per port, USB storage, 10 GB Ethernet uplink flexibility
Words: 569 - Pages: 3
Introduction Course: IS3120 Week: 1 Lab: Understanding Cisco hardware The Understanding Cisco hardware lab provides you with the instructions and Cisco hardware to develop your hands on skills in understanding the output of various show commands to discover the hardware and software capabilities of a Cisco device. This lab includes the following exercises: 1) Understanding Cisco switch hardware 2) Understanding Cisco router hardware Notes As you perform the various steps of the lab, update
Words: 3375 - Pages: 14
Switch Configuration Switch Configuration First I would unpack the switch along with all of its contents, check for any missing or damaged items and if any our found I would then contact the cisco team but if everything looks great I would then proceed. If I have all the equipment ready for the switch I would then continue on with what they call the express set up. First thing I would do is verify that no devices are connected to the switch when first initializing the setup the switch will
Words: 585 - Pages: 3
