Safety Awareness in Electrical Engineering It is important for students studying to become electrical engineers to be aware of electrical safety measures and hazards. There are several severe, even life-threatening hazards that one could encounter when among electrical equipment. Two main dangers related to dealing with electrical equipment shocks and burns are overloading outlets with too many devices, and neglecting to implement the usage of a Ground-Fault Circuit Interrupter. While outlets
Words: 395 - Pages: 2
----------------------- Employers • Protect the safety and health of employees and people who may be affected • Conducting risk assessments • Maintaing safe facilities • Developing and implementing control measures • Providing adequate information and training Workers • Follow safety procedures • Using equipments in proper manner • Must not engage in negligent acts • Introduce activities which are safe for the members’ level of readiness Members • Dress appropriately
Words: 380 - Pages: 2
OSHA 10 Safety Training OSHA SAFETY TRAINING FACT SHEETS -1- OSHA 10 Safety Training TABLE OF CONTENTS Introduction Electrical Fall Protection Struck-By Accidents Caught-Between Accidents PPE Scaffolds Cranes Power Tools Excavations Materials Handling Demolition Hazards Communication 3 6 10 12 14 15 18 21 24 26 28 32 36 -2- OSHA 10 Safety Training FACT SHEET: INTRODUCTION The mission of the Occupational Safety and Health Administration (OSHA) is to send every worker home whole and healthy
Words: 9845 - Pages: 40
BSBSMB401AS – Establish Legal and Risk Requirements of Small Business ASSESSMENT 1 Question 1 * Sole Trader – One advantage of operating as a Sole Trader are the minimal establishment costs and one disadvantage would be having unlimited liability. * Partnership – One advantage of operating as a Partnership is the ability to split taxation and one disadvantage is that salaries are not tax deductible. * Company – One advantage of operating as a Company is that it allows for perpetual
Words: 1447 - Pages: 6
flash specifically fire fighters. The article explains what arc flash is and what the resulting injuries can be plus causes of arc flash in the workplace. It talks about the responsibilities of the employer and the employee and the standards for electrical safety in the workplace. The article was written in 2009 by Elizabeth Ford Burkhart for Fire Engineering July 2009 issue. The article starts out with an excerpt from a fatal incident to an Illinois firefighter and an electrician. This significance
Words: 567 - Pages: 3
Building a New Structure – NFPA Codes Susan Wint ITT Technical Institute NT1310 Physical Networking Author Note This paper is being submitted on October 4, 2015, for Professor Carlos Miranda NT1310 Physical Networking. Building a New Structure – NFPA Codes The FCC issues guidelines that govern the installation of telecommunications cabling and the design of communications devices built or used in the US must follow a code of ethic like local, state, county, city and NEC, and that
Words: 912 - Pages: 4
Transmission Line Safety By: Connor Anderson Throughout planet earth’s history, one of the most significant innovations from the human race was the introduction of electrical power. Electrical power has changed the lives of every person that has access to it. It can easily be deemed to have had the largest impact on human life, because it single handedly changed our values and our dependencies. This innovations marked the beginning of a new chapter in which electrical power is exploited globally
Words: 1282 - Pages: 6
Travil. This books is provides safety practices for workers aboard a ship. It is recommended that those who are responsible for the health and safety of the workers to follow the codes outlined in the book. The codes in the book are only recommended suggestions and do not supersede other health or safety regulations or laws. Injuries and accidents are the primarily the cause of inadequate training and workers need to be aware of possible safety hazards. Mandelstam, M. (2002). Manual handling
Words: 264 - Pages: 2
Earthquake Safety Checklist FEMA 526 / August 2005 FEMA Important Numbers and Addresses Your family may not be together when an earthquake strikes, so use the spaces below to record information that will help you communicate with one another. Remember, during the rst 24 hours following a major earthquake, use your telephone only in case of an emergency. Police telephone Fire Department telephone Ambulance telephone ‘s work address Call 911 for emergencies Telephone/cell phone ‘s
Words: 2784 - Pages: 12
Health and Safety Management As known to all, there are always such-and-such potential hazards in people's work activities or work environment, which may cause property damage, be harmful to environment, affect human’s health and even cause injury or accident. People call the possibility of one or some danger causing incidents and its possible consequence as risk. The object of contemporary occupational health and safety management is the occupational safety and health risks. These hazards may be chemical
Words: 281 - Pages: 2
