1. INTRODUCTION 5 1.1 What is construction work? 5 1.2 Who has duties relating to construction work? 7 1.3 What is involved in managing risks relating to construction work? 10 2. MANAGING RISKS WITH CONSTRUCTION WORK 12 2.1 Identify the hazards 12 2.2 Assess the risks 12 2.3 Control the risks 13 2.4 Review control measures 14 3. SAFE WORK METHOD STATEMENTS 16 3.1 What is a safe work method statement? 16 3.2 Preparing a safe work method statement 17 3.3 Implementing a safe work method
Words: 28844 - Pages: 116
SAFETY AND LABORATORY RULES for ORGANIC CHEMISTRY LABORATORIES Explanatory comments may be found below under Standard Operating Procedures APPROVED SAFETY GOGGLES MUST BE WORN AT ALL TIMES. NO FOOD, DRINKS OR SMOKING ARE ALLOWED. SHOES MUST BE WORN. No bare feet or thong sandals are allowed. WORK IS PERMITTED ONLY DURING SCHEDULED LABORATORY PERIODS. Work is not permitted in other laboratory periods unless space is available and written permission is obtained from your instructor. NO OPEN
Words: 2503 - Pages: 11
CASE STUDY H&M WORKPLACE Fire safety is a major issue in Bangladeshi garment factories. Poor electrical installations and bad maintenance often create significant fire hazards. In order to make a safe workplace the norm throughout the sector, we think that it is essential to involve all stakeholders such as the government, industry organisations, trade unions and other brands. This is why we developed two training films to increase fire safety awareness amongst employees at all levels in garment
Words: 843 - Pages: 4
HANDLING REQUIREMENTS IN THE LABORATORY Hazard Identification The Environmental Health and Risk Management has a standard to abide by that states liquids that are flammable, agents that are toxic, chemicals of a highly reactive nature, and radioactive substances must be used in a way in which there is no true hazard to worker or public health. It is said that chemical hazards are likely one of the most commonly seen in the laboratory setting. These include, electrical, radioactive, biological, mechanical
Words: 1085 - Pages: 5
Practices for Fire Safety (ELECTRICAL INSTALLATION) T.R.A. Krishnan SUBSTATION LAYOUT INDOOR Oil capacity inside oil filled equipment individual or aggregate 2,300litres or above. • Detached and shall be at least 6 m away from the surrounding buildings and/or occupancies. • If within 6 m - Single Fire Proof Doors for facing wall openings and 6 mm thick wired glass for facing window openings of substation. • Attached substations - 350 mm thick brick or 230 mm RCC common wall carried
Words: 2995 - Pages: 12
----------------------- Energy Trace Barrier Analysis (ETBA) – Qualitative analysis technique used to identify hazards by tracing energy flow into, thru, & out of a system. “Energy hazard” is defind as an energy source tht adversely impacts an unprotectd or vulnerable target. Assessment is conductd by following the energy path to determine if adequate controls are in place to assure undesird energy release does not occur.– Energy flow is tracd through the system operation & energy transfer points
Words: 2026 - Pages: 9
Task 1 P1 1. Since 1974 in the UK Legislations and regulations of working health and safety was established for engineering and any other working environments, Health and Safety rules and regulations are also very important because more than 500 people dying and more than 30,000 people are getting injured annually. There are different legislations and regulations that are important to follow by the Sheet metal work and fabrication company. I chose the following important points to follow by the
Words: 978 - Pages: 4
EXECUTIVE SUMMARY You may ask yourself what is needed for a new building and what are the codes that must be followed in order to have a building nice and free of hazards. Well to start here are the new building requirements for the following materials: patch cables, cat 6 cables, fiber optic multi-mode, cable trays, Cisco- WS-C3750 G24PS-S 24 Ports, laser printer, vertical runs, computers, Cisco border router, server run a and server run b. The following codes must be in play to ensure
Words: 1121 - Pages: 5
Twenty organizations that influence cable plant implementation are: 1) American National Standards Institute (ANSI) a) ANSI does not develop the American National Standards (ANS) documents, but it facilitates their development by establishing a consensus between the members interested in developing a particular standard. b) ANSI standards include, SCSI interface specifications, programming language specifications, and specifications for character sets. c) ANSI helped to
Words: 1851 - Pages: 8
INTRODUCTION This afternoon I inspected room 23c of the college for the purpose of identifying any safety hazards which could affect users of the workshop. I have listed my observations, together with actions, which will require to be taken ensuring the college presents a safe place to work for students, lecturers and visitors. I would thank you for your assistance in providing me access to the facility and have highlighted some of the more serious deficiencies below, which will require
Words: 1432 - Pages: 6
