Cover Memo for Team Member Packet (Template) DATE: TO: Inspectors FROM: (Team leader) SUBJECT: Lab inspection at (name of laboratory) Enclosed please find your packet for the inspection at the above-referenced laboratory on (date). Before the inspection, we’ll have a meeting of the team to go over logistics and answer any questions you may have. (Enter Date, time, and location of pre-inspection meeting) Travel arrangements are as follows: (Enter Travel and hotel
Words: 649 - Pages: 3
withstand these loads. According to the British Civil Airworthiness Requirement, safety factor of at least 1.5 times the normal working load for aircraft fuselage structure must be used. Failure is catastrophic, the limit load occurs during every flight and the fuselage is not only subject to pressurization forces. The static strength of the fuselage therefore incorporates a larger safety factor. A reduced factor of safety from the stated factor will preclude failure due to creep and provide adequate
Words: 505 - Pages: 3
Front entrance. [pic] Read the document on VLE “P2 emergency procedures Barking” Read the document on VLE “P2 fire and emergency procedures” Read the document on VLE “HSE Motorsport” All documents in folder “Health and Safety Procedures” In Unit 1 EWP Describe in your own words a- Evacuation procedure for Motor Vehicle workshop if you discovered a fire, (a small diagram showing location of fire exits, alarm points, fire extinguishers etc. would make this clearer)
Words: 467 - Pages: 2
Laboratory biosafety manual Third edition World Health Organization Geneva 2004 WHO Library Cataloguing-in-Publication Data World Health Organization. Laboratory biosafety manual. – 3rd ed. 1.Containment of biohazards - methods 2.Laboratories - standards 3.Laboratory infection - prevention and control 4.Manuals I.Title. ISBN 92 4 154650 6 (LC/NLM classification: QY 25) WHO/CDS/CSR/LYO/2004.11 This publication was supported by Grant/Cooperative Agreement Number U50/CCU012445-08 from the
Words: 50038 - Pages: 201
capital Dhaka in which 112 people were killed and several hundreds were injured. This happened in November, 2012. The main reason for the fire was an electrical short circuit. The factory did not have required safety equipment’s and other safety measures were not followed by the factory which were mandatory as per the law of the country in order to ensure safety towards your employees due to which employees were not able to evacuate the factory at time of fire and lost their lives. Now the question is that
Words: 833 - Pages: 4
emergency situations. This includes the training of each new employee before it’s even released to the job site. Employee must have a full and satisfactory training session with the Crew Lead. The Crew Lead will therefore explain our new hire of all our safety standards, PPE policy, and customer relation skills. The Crew Lead has to comply with our contract with all deliverables, to include Green Certified specs.The Crew Lead is also to retrain any employees that fail to meet our QC standards. Crew Lead
Words: 1816 - Pages: 8
Risk Assessment It is important that children are provided with safe and secure environments. Child-minders need to ensure that, a risk assessment is put in place, and therefore they make necessary changes to secure their safety at all times. Child-minders must ensure that the home, indoors and outdoors, are safe and secure. This should include appropriate measures such as including indoor and outdoor security. For example, ponds, drains, pools should be made safe or inaccessible to children
Words: 834 - Pages: 4
Revised 12/2/2014 FIRE DEPARTMENT ● CITY OF NEW YORK STUDY MATERIAL FOR THE CERTIFICATE OF FITNESS EXAMINATION FOR F-03 INDOOR PLACE OF ASSEMBLY SAFETY PERSONNEL (Premises related) © 08/2012 New York City Fire Department - All rights reserved ® TABLE OF CONTENT NOTICE OF EXAMINATION ....................................................................................... I STUDY MATERIAL AND TEST DECRIPTION ..................................................VII INTRODUCTION
Words: 11241 - Pages: 45
maintain a safe, healthy learning environment I model safety practices and healthy routines in an environment that supports development and growth in these areas. My goal is to provide a clean healthy environment that meets each Childs physical need. Making sure the class room and playground are clean and safe at all times; To accomplish this goal I complete daily safety checklists that include ensuring exits and hallways are open, electrical cords are out of reach, evacuation procedures are posted
Words: 739 - Pages: 3
Curtin University of Technology Department of Civil Engineering Environmental Engineering Management 690 Assignment 2 Management of Health and Safety at Work in the Chemical Industry Prepared for: Professor Geoff Taylor By: Mohammed Alshiha Student ID: 13884145 Date: Jan 1st 2010 1.0 Introduction 1 Declaration (i) I have read and understood Curtin University’s policy on plagiarism and I confirm that the work submitted on the 1st of January by me is my own work, and that
Words: 4460 - Pages: 18
