NT2640 IP Networking INSTRUCTOR GUIDE Onsite Credit hours: 4.5 Contact /Instructional hours: 34 Theory, 22 Lab Prerequisite: NT1210 Introduction to Networking or equivalent Course Revision Table Change Date Updated Section Change Description Change Rationale Implementation Quarter 07/18/2011 All New Curriculum New Curriculum September 2011 02/19/2013 All Updated labs across the course to map the 2nd edition of lab manual Immediately 02/27/2013
Words: 22068 - Pages: 89
ITT Technical Institute NT2640 IP Networking Onsite Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisites: NT1210 Introduction to Networking or equivalent Course Description: This course explores network design and implementation by applying the TCP/IP protocols to provide connectivity and associated services. Planning and deployment of network addressing structures, as well as router and switch
Words: 2573 - Pages: 11
Unit 4 Labs [pic] Detailed Lab Step Answers: 38 Answers Step 3. | | |1 and 192.168.16.01/24 | | | |
Words: 1716 - Pages: 7
Employ automated tools to continuously monitor workstations, servers, and mobile devices for active, up-to-date anti-malware protection with anti-virus, anti-spyware, personal firewalls, and host-based IPS functionality. All malware detection events should be sent to enterprise anti-malware administration tools and event log servers. The endpoint security solution should include zero-day protection such as network behavioral heuristics. Employ anti-malware software and signature auto-update features
Words: 279 - Pages: 2
NT1430 Linux Networking STUDENT COPY: Assignment 1 for All Units Assignment 1 for All Units: Chapter Exercises (NT1430.GA1) Learning Objectives and Outcomes Each unit exercise covers the Learning Objectives and Outcomes for that unit. You can review those objectives and outcomes in your syllabus. Assignment Requirements Type out answers for the end-of-chapter exercise questions indicated in the list below for each unit. You will be graded on accuracy and completeness. Required Resources
Words: 403 - Pages: 2
EIGRP Vs OSPF EIGRP - Is an advanced distance-vector routing protocol, with optimizations to minimize both the unstable route incurred after topology changes, as well as the use of bandwidth and processing power in the router. Routers supporting EIGRP will automatically redistribute route information to IGRP neighbors by converting the 32 bit EIGRP metric to the 24 bit IGRP metric. Most of the routing optimizations are based on the Diffusing Update Algorithm (DUAL) work from SRI, which guarantees
Words: 361 - Pages: 2
1. Cut-through frame processing by a switch allows the switch to discard frames that fail the FCS check. - False 2. When a switch receives an Ethernet frame to a destination MAC address which is not in the devices MAC address table the switch applies the following logic - Floods the Ethernet frame out all interfaces except the received interface 3. Which of the following correctly describes the collision domain design trade-offs? - Single collision domain requires all devices on a segment to
Words: 1118 - Pages: 5
NT2640 Cisco Routers Richard P Walsh 11/24/2015 Cisco routers come in various series and models. Each series and model has different purposes and performance levels for the tasks required of them. For the purpose of this report, I chose 1 model from the 3 main series. The first is the Cisco 1861, then the Cisco 2811, & finally the Cisco 3845 The Cisco 1861 is an Integrated Service Router, that has an integrated, managed Ethernet switch, and has eight 10/100 PoE ports. It is an All-in-One
Words: 561 - Pages: 3
NTNT2640 IP Networking Midterm Люда Григорашенко Fri Apr 25 17:29:25 CDT 2014 Which two of the following are Layer 2 protocols commonly used in WANs? PPP and HDLC Which of the following describes a collision domain? Devices connected to an Ethernet hub Which of the following protocol operates at the OSI model Transport Layer? UDP What process is used by a DNS server to add a UDP header to the contents of a DNS query response, followed by adding an IP header, and then adding a data link header
Words: 791 - Pages: 4
Kelly Keys NT2640 Fri. Night Project Paper 1. Routing tables and how the router will perform a route lookup: a. Routing Table Format- A routing table is used by TCP/IP network routers to calculate the destinations of messages it is responsible for forwarding. The table is a small in-memory database managed by the router's built-in hardware and software. Each IP address identifies a remote router (or other network gateway) that the local router is configured to recognize. For each IP address
Words: 3788 - Pages: 16
