of wall are tangent to the surface of the vessel. The resulting stresses on an element of the wall will thus be contained in a plane tangent to the surface of the vessel. In this experiment, we are going to determine the circumferential stress under open condition, and analysis of combined axial and circumferential stress. We propose to determine the stresses exerted on a small element of wall with sides respectively parallel and perpendicular to the axis of the cylinder. Because of axis symmetry of
Words: 3735 - Pages: 15
Dynamics and Control ENGD3038 | Position and Speed Control of 1DoF Torsional Mechanical System | Name: Elina Ioannou P12201589 Lecturer: Prof. Bogumil Ulanicki | De Montfort University 2/24/2015 | ContentsPage Introduction………………………………………………………………………………….3 Parameters of the open loop 1DoF torsional system…………………….4 Position Proportional Control plotting data………………………………….6 Parameters of transient responses and their affect by gain Kp……..11
Words: 2493 - Pages: 10
Objectives: • Know general PLC issues • To be able to write simple ladder logic programs • Understand the operation of a PLC 2.1 INTRODUCTION Control engineering has evolved over time. In the past humans were the main method for controlling a system. More recently electricity has been used for control and early electrical control was based on relays. These relays allow power to be switched on and off without a mechanical switch. It is common to use relays to make simple logical control decisions
Words: 3478 - Pages: 14
mass will always stay the same but only with a closed system. This all relates to the experiments we have done in class. In experiment 2.1 we found out if the mass changed when salt dissolves in water. We found that it did not. This experiment was a physical change because you didn’t create something new.The reactants we had in this experiment were the the water and salt. The products were the dissolved salt and the water. We used a closed system so that we did not get any spillage of any salt
Words: 489 - Pages: 2
feature open source Achieving Quality in Open Source Software Mark Aberdour, opensourcetesting.org Reviewing objective studies of open source software quality can help us better understand how to achieve software quality in both open and closed-source development. T he open source software community has published a substantial body of research on OSS quality. Focusing on this peer-reviewed body of work lets us draw conclusions from empirical data about how to achieve OSS quality, rather
Words: 4510 - Pages: 19
disabled. Try using --system-dns or specify valid servers with --dns-servers Host is up (0.0021s latency). Not shown: 998 closed ports PORT STATE SERVICE 22/tcp open ssh 3389/tcp open ms-wbt-server MAC Address: 3E:9A:1D:B4:13:EC (Unknown) Nmap scan report for 172.30.0.11 Host is up (0.0014s latency). Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 3389/tcp open ms-wbt-server MAC
Words: 383 - Pages: 2
A Comparison of Inter-Organizational Business Models of Mobile App Stores: There is more than Open vs. Closed Roland M. Müller1, Bjorn Kijl2 and Josef K. J. Martens3 1 Berlin School of Economics and Law, Department of Information Systems, roland.mueller@hwr-berlin.deUniversity of Twente, School of Management and Governance, 2 b.kijl@utwente.nl, 3j.k.j.martens@alumnus.utwente.nl Abstract The purpose of this paper is to analyze the competition among mobile app stores for smart mobile media devices
Words: 8482 - Pages: 34
A system is a set of interacting or interdependent components forming an integrated whole. Every system is delineated by its spatial and temporal boundaries, surrounded and influenced by its environment, described by its structure and purpose and expressed in its functioning. Fields that study the general properties of systems include systems science, systems theory, systems modeling, systems engineering, cybernetics, dynamical systems, thermodynamics, complex systems, system analysis and design and systems
Words: 2579 - Pages: 11
conversion systems: closed-cycle, open-cycle, and hybrid. Closed-cycle systems use the ocean's warm surface water to vaporize a working fluid, which has a low-boiling point, such as ammonia. The vapor expands and turns a turbine. The turbine then activates a generator to produce electricity. Open-cycle systems actually boil the seawater by operating at low pressures. This produces steam that passes through a turbine/generator. And hybrid systems combine both closed-cycle and open-cycle systems. Ocean
Words: 376 - Pages: 2
Save from: www.uotiq.org/dep-cs University of Technology Computer Science Department 4th Class Management Information Systems (MIS) اﺳﺘﺎذ اﻟﻤﺎدة: د.ﻋﻠﻴﺎء ﻋﺒﺪاﷲ Reference book: "Management Information System new approaches to Organization and Technology", 5e, Kenneth C. Laudon , Jane P. Laudon. Lecture-1 Definitions of Management Information Systems A. Management: What is management? – 1. Planning – Goal setting – Environmental scanning – Forecasting – Data collection – 2.
Words: 2585 - Pages: 11
