Free Essay

Management

In:

Submitted By dugujian007
Words 7222
Pages 29
DEVELOPING
A
FATIGUE MANAGEMENT PLAN
FOR
COMMERCIAL VEHICLE DRIVERS
AND OPERATORS

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 2 / 20

INTRODUCTION ................................................................................................................................................ 4
COMMERCIAL VEHICLE DRIVER FATIGUE IS A MAJOR SAFETY PROBLEM .............................................................. 4
A DRIVER FATIGUE MANAGEMENT PLAN WILL HELP EMPLOYERS MEET THEIR DUTY OF CARE ............................. 4
OPERATING STANDARDS FOR WORK AND REST .................................................................................. 5
THE OPERATING STANDARDS IN THE REGULATIONS ARE USED TO ESTABLISH A SAFE SYSTEM OF WORK ............. 5
OPERATING STANDARDS FOR WORK AND REST IN ROAD TRANSPORT ................................................................... 5
DRIVING WITHOUT A RELIEF DRIVER ................................................................................................................... 5
DRIVING WITH A RELIEF DRIVER .......................................................................................................................... 5
A DRIVER FATIGUE MANAGEMENT PLAN............................................................................................... 6
MANAGING COMMERCIAL VEHICLE DRIVER FATIGUE REQUIRES EFFECTIVE POLICIES & PROCEDURES ................ 6
BASIC PRINCIPLES TO INCLUDE IN A DRIVER FATIGUE MANAGEMENT PLAN ......................................................... 6
DEVELOPING A DRIVER FATIGUE MANAGEMENT PLAN................................................................... 8
STEPS TO DEVELOP A DFMP ............................................................................................................................... 8
IT IS IMPORTANT THAT YOU HAVE A WRITTEN DFMP ......................................................................................... 8
SCHEDULING ....................................................................................................................................................... 8
ROSTERING OF COMMERCIAL VEHICLE DRIVERS .................................................................................................. 9
FACTORS TO BE TAKEN INTO ACCOUNT ............................................................................................................... 9
CONTROL MEASURES ......................................................................................................................................... 10
WHAT IF MY OPERATIONS DO NOT CONFORM TO THE REGULATIONS?................................................................ 10
COMMERCIAL VEHICLE DRIVER WELL-BEING .................................................................................. 11
READINESS FOR DUTY ....................................................................................................................................... 11
COMMERCIAL VEHICLE DRIVER HEALTH AND FITNESS ...................................................................................... 11
WORKPLACE CONDITIONS ................................................................................................................................. 11
TRAINING.......................................................................................................................................................... 13
TRAINING IS CRITICAL ....................................................................................................................................... 13
INDUCTION, REFRESHER AND FURTHER TRAINING ARE ALL NECESSARY ............................................................ 13
FORM & CONTENT OF TRAINING ........................................................................................................................ 13
OPERATOR SUED FOR PUSHING COMMERCIAL VEHICLE DRIVER.............................................. 15
ADMINISTRATION.......................................................................................................................................... 16
RESPONSIBILITIES.............................................................................................................................................. 16
DOCUMENTATION.............................................................................................................................................. 16
MANAGING INCIDENTS ...................................................................................................................................... 16
REVIEWING THE DRIVER FATIGUE MANAGEMENT PLAN .............................................................. 17
AUDIT & REVIEW THE DFMP TO ENSURE IT IS ADEQUATE ................................................................................ 17

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 3 / 20

Developing a driver fatigue management plan for commercial vehicle drivers and operators in Western
Australia
A transport industry training resource originally developed by Lance Poore (Department for Planning and Infrastructure) and Laurence Hartley (Institute for Research in Safety & Transport, Murdoch
University).
After reading this training information and completing the accompanying self-assessment questions on the SafetyLine website, you should be able to: explain the basic principles of managing fatigue contained in division 10 of the Occupational
Safety and Health Regulations and the draft Code of Practice for Fatigue Management for
Commercial Vehicle Drivers; state the principles used in planning a company Driver Fatigue Management Plan (DFMP); explain the importance that commercial vehicle driver well-being has on work performance and fatigue; and explain the importance of knowing the correct procedures and the importance of training and dealing with critical incidents.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 4 / 20

Introduction
Commercial vehicle driver fatigue is a major safety problem
The concept of “Due Diligence” has meant that operators must take every precaution reasonable in the circumstances to protect the safety and health of their workers, customers and the general public.
In turn the need for better standards of safety and health has been matched by an increasing requirement for documentation of commercial vehicle driver operations and activities. Commercial vehicle driver fatigue has long been recognised as a major safety problem in all forms of transport. In other states of Australia, restrictions on hours of work and on-road enforcement using logbooks have traditionally been used to address this issue. In Western Australia we have not gone down this path to control fatigue. Instead Western Australia uses the Occupational Safety and Health Act 1984 and the
Occupational Safety and Health Regulations 1996 to require employers and employees to work together to achieve a safer road transport industry.
A driver fatigue management plan will help employers meet their duty of care
The WorkSafe division of the Department of Consumer and Employment Protection, the Department for Planning and Infrastructure, and employer and employee representatives from the transport industry have collaborated to produce amendments to the Occupational Safety and Health
Regulations and have developed a draft Code of Practice for Fatigue Management for Commercial
Vehicle Drivers which sets standards for safe operations in road transport. Those standards are summarized in this training resource which explains the background to the development of a Driver
Fatigue Management Plan (DFMP), and aims to provide some help and advice for operators who wish to develop a DFMP or who may wish to revise or update their existing system. So we’ll look at the following issues: the basic principles for fatigue management contained in the OSH regulations and the draft code of practice; the steps in producing a company Driver Fatigue Management Plan; commercial vehicle driver well-being – an important consideration; administrative tasks necessary to ensure that policies, procedures and contingency actions are performed as required by the regulations; and policies necessary for dealing with critical incidents and for the provision of training.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 5 / 20

Operating standards for work and rest
The operating standards in the regulations are used to establish a safe system of work
The operating standards included in the regulations provide a guide to industry on how to plan trip schedules and rosters for commercial vehicle drivers that best manage fatigue. The standards emphasise the importance of sleep and the timing of work and rest. The operating standards offer flexibility in hours of work to reflect the geography of WA and the distances between towns.
The operating standards, as set out in the regulations, provide guidance to the authorities and the courts as well as providing guidance to operators. The WorkSafe division of the Department of
Consumer and Employment Protection and the Department of Planning and Infrastructure use those standards when investigating an incident involving commercial vehicle driver fatigue or checking whether a safe system of work is in place.
Operating standards for work and rest in road transport
Transport operations must, as far as practicable, be conducted within the operating standards described below.
The 24-hour cycle starts at the commencement of work following a long break of 7 hours or more.
Operating standards for hours of work and rest
Driving without a relief driver
(Solo commercial vehicle driver)
Minimum continuous non work time in any 24 hours

7 hours

Minimum non work time in any 72 hour period

27 hours

Maximum time between major rest breaks
(7 hours or longer)

17 hours

Minimum 24 hour continuous periods of time not working in any 14 days

2 periods

Minimum 24 hours continuous periods of time not working in any 28 days

4 periods

Driving with a relief driver
(two-up driving) for each driver…
Minimum non work time in a 24 hour period
Minimum continuous non work time in any 48 hours
(must be in a stationary vehicle or away from the vehicle)
OR
Minimum continuous non-work time in any 7 day period
(must be in a stationary vehicle or away from the vehicle)
All commercial vehicle drivers
Maximum continuous work time
(driving and non-driving work time)
Minimum break from driving for each 5 hours of work
Minimum break from driving to be taken after 5 hours work
Maximum work time in any 14 days
(unless working to 28 day roster, then it is reduced to 144 hours) 7 hours
7 hours

48 hours

5 hours
20 minutes
10 minutes
168 hours

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 6 / 20

A driver fatigue management plan
Managing commercial vehicle driver fatigue requires effective policies & procedures
A Driver Fatigue Management Plan (DFMP), as described in the regulations, is a written document that sets out the requirements and procedures relating to how a company will schedule trips; roster drivers; establish a driver’s fitness to work; educate drivers in fatigue management; manage incidents on or relating to commercial vehicles; and establish and maintain appropriate workplace conditions.
This is not as difficult as you might think. Every company that operates commercial vehicles needs a
DFMP, and it should be part of your company’s risk management systems. Every company has some risk management systems, even if they are not written down. Preventative truck maintenance is a risk management system, as are commercial vehicle driver rosters.
The most effective way to reduce the risks associated with driver fatigue is by planned long-term measures. Rostering and scheduling practices are essential long-term measures, which are supported by short-term practices such as power naps and short breaks.
Managing commercial vehicle driver fatigue requires effective management practices and office procedures including: maintaining open lines of communication between management and commercial vehicle drivers; encouraging feedback from commercial vehicle drivers; ensuring that the DFMP is included in commercial vehicle driver induction programs and in other Human Resource procedures and practices; and appropriate documentation and record keeping practices.
Documentation of policies and procedures associated with the driver fatigue management plan provides practical evidence that a system is in place and is actively working to manage commercial vehicle driver fatigue. It also allows the effectiveness of the system to be measured. Documentation should be well managed and include numbered and dated systems in place for updating information.
Record keeping is also important. Records provide the detail that the program is working and standards are being met. Records are an essential part of an overall risk management program as they provide a history of a particular commercial vehicle driver or management activity. This information may be of vital importance in any legal action. Records must be kept for a minimum of three years.
You will need a written ‘driver fatigue management plan’. The Occupational Health and Safety Act
1984 requires employers to provide their employees with a safe system of work. A driver fatigue management plan is evidence that you have a safe system of work in place, and WorkSafe inspectors may ask to see it when visiting your workplace or when conducting an investigation into a serious accident or incident.
Basic principles to include in a driver fatigue management plan
A number of basic principles apply when developing a Driver Fatigue Management Plan. The following are detailed in the draft code of practice and should be considered as the basis for most systems. Give a commercial vehicle driver at least 24 hours notice to prepare for working time of 14 hours or more.
A schedule must permit a solo commercial vehicle driver to have the opportunity for at least 7 continuous hours of rest in any 24-hour period, preferably between 10pm and 8am.
Minimise irregular or unfamiliar work rosters.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 7 / 20

Operate flexible schedules to allow for sufficient breaks from driving or discretionary sleep.
Minimise very early departures to give commercial vehicle drivers the maximum opportunity to sleep in preparation for the trip.
When commercial vehicle drivers return from leave, minimize night-time schedules and rosters to give drivers time to adapt to working long hours especially at night.
Require a commercial vehicle driver to present and remain in a fit state for duty including not being impaired by alcohol or drug use.
Develop a written policy on fitness for duty in consultation with employees and unions.
Provide an appropriate truck sleeper berth if commercial vehicle drivers will be required to sleep in the vehicle.
Require regular assessment of a commercial vehicle driver’s health by a suitably qualified medical practitioner (to the National Road Transport Commission or Federal office of Road
Safety standard).
Ensure that the medical assessment includes consideration of sleep disorders and other fatigue related conditions.
Identify health problems that affect the ability to work safely, e.g. diabetes, heart disease, sleep apnoea.
Provide appropriate employee assistance programs where necessary and practicable.
Provide commercial vehicle drivers with information and assistance to promote management of their health.
Provide a working environment that meets appropriate Australian standards for seating and sleeping accommodation.
When commercial vehicle drivers work a continuous rotating shift system of 5 days or more there must be 24 hours of non-working time between shift changes.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 8 / 20

Developing a driver fatigue management plan
Steps to develop a DFMP
You might like to consider the following ten-step approach to establishing a driver fatigue management plan in your business.
1. Obtain commitment from management.
2. Obtain management and employee agreement to cooperate.
3. Provide fatigue awareness training throughout the company.
4. Involve employees' families.
5. Incorporate the program in the overall safety and health culture of the company.
6. Establish non-punitive medical screening for health fitness and sleep disorders.
7. Devote attention to commercial vehicle driver scheduling; including provision for adequate rest. 8. Inform clients and enlist their cooperation.
9. Establish a trial period
10. Establish and collect measures of effectiveness; evaluate.
It is important that you have a written DFMP
At the end of this paper there is a checklist you can use to ensure that your driver fatigue management plan is adequate. You can use this for preparing your driver fatigue management plan documentation. All you need do is check the boxes in the list to show you comply with the Standards laid out there. Of course you must be honest! You may be asked by WorkSafe, to produce your driver fatigue management plan one-day, especially if you have a commercial vehicle that is involved in a serious incident or accident. During their investigation, WorkSafe may need to examine supporting documents that show that your commercial vehicle drivers have had at least 27 hours of rest in any 72 hours, and have worked no more than 168 hours in a fortnight, if they are working to a 14 day roster, and no more than 144 hours in any 14 day period if they are working to a 28 day roster.
It is mandatory for the commercial vehicle operator (the Company) to retain trip records for your commercial vehicle drivers for 3 years.
Scheduling
A key factor in managing commercial vehicle driver fatigue is how a company schedules or plans individual trips to meet a freight task. Where practicable and reasonable, scheduling practices should include appropriate pre-trip or forward planning to minimise fatigue. A commercial vehicle driver should not be required to drive unreasonable distances in insufficient time and without sufficient notice and provision for adequate rest. Scheduling practices should not put the delivery of a load before a commercial vehicle driver’s safety or health. If your scheduling practices are inadequate the rest of your system is meaningless.
The main risk factor for fatigue crashes is inadequate sleep for one or more nights. Company procedures should recognize that at least 6 hours of sleep is required each night to minimize fatigue.
A minimum of 7 continuous hours break must be planned for, to ensure a commercial vehicle driver has the opportunity for at least 6 hours of actual sleep. This is an absolute minimum and may still lead to increased levels of fatigue over a number of days. Schedules should be developed that provide this or greater opportunities for sleep.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 9 / 20

The second main risk factor for fatigue crashes is working when the commercial vehicle driver would normally be asleep. People who work at night have trouble adjusting their body clocks. No matter how much sleep a person has beforehand, they will still feel sleepy between 1.00am and 6.00am.
Company procedures should recognize that driving during this period puts employees and other road users at risk. There should be written procedures that demonstrate that schedules are developed with this risk in mind, and that where possible there is the opportunity to sleep during this period. Simply being on the road at 3 am does not mean there will be a crash, but it does mean a greater awareness of the risks is required.
Rostering of commercial vehicle drivers
Rosters are the commercial vehicle drivers planned pattern of work and rest for a week or more. A commercial vehicle drivers roster and workload should be arranged to maximize the opportunity for them to recover from the effects or onset of fatigue. Rostering practices must as far as practicable, be in accordance with the OSH regulations.
Night shift work and rotating or irregular shift patterns are risk factors for fatigue crashes. Company procedures should document how these risk factors are addressed. They should outline how night work is minimised and if it cannot be eliminated, how the company manages fatigue related to night work and documents its approach.
Factors to be taken into account
To comply with the operating standards, scheduling and rostering must ensure that:
A commercial vehicle driver is given at least 24 hours notice to prepare for working time of
14 hours or more.
A commercial vehicle driver is not permitted to exceed 168 hours of working time in any 14 day period,.
Total non-working time in any 72 hours is at least 27 hours.
A solo commercial vehicle driver has least one continuous 7-hour period of non-work time in any 24-hour period and preferably between 10pm and 8am.
Continuous periods of work time do not exceed 5 hours before a break of at least 10 minutes is taken.
A schedule must allow for an average of 20 minutes breaks from driving for each 5 hours of work time for a commercial vehicle driver, and a minimum break from driving of at least 10 consecutive minutes at the end of 5 hours work time.
Maximise the opportunity for sleep and to prepare for a trip by minimizing very early departures. A commercial vehicle driver has at least two continuous period of 24 hours non-work time in
14 days.
Minimise irregular or unfamiliar work rosters.
Minimise schedules and rosters that depart from daytime operations when commercial vehicle drivers return from leave: commercial vehicle drivers returning from leave require time to adapt to working long hours especially at night.
Ensure 24 continuous hours of non-work time between shift changes when commercial vehicle drivers work a continuous rotating shift system of 5 days or more.
Time doing work that is incidental to the driving, such as servicing and maintaining the vehicle

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 10 / 20

or operating mobile plant is counted as work time and needs to be taken into account when planning trips.
Control measures
To ensure compliance with the operating standards the following practices should be adopted when a commercial vehicle driver is likely to work more than 14 hours in consecutive 24-hour periods.
Replace commercial vehicle driver with a fresh relief driver, where practicable.
Reduce the period of work time in the next 24-hour period to ensure that at least 27 hours of non work time is available in any 72 hour period, to recover from the effects of any accumulated sleep debt.
Set schedule so commercial vehicle driver can rest when and where most appropriate.
Use shared driving , driving with a relief driver (two-up driving).
Split trip into shorter continuous driving periods.
Schedule rest to precede or coincide with high fatigue risk times, e.g. night and dawn.
Change customer pick-up or delivery times where possible.
Allow for a day of non-work time after a trip.
Remove or modify tasks incidental to the driving, such as loading / unloading, refueling etc, that it is not necessary for the commercial vehicle driver to perform.
Ensure a commercial vehicle drivers roster is as regular as practicable.
Employ a commercial vehicle driver on light non-driving duties at the depot to allow sleep at home. Ensure a solo commercial vehicle driver has the opportunity for at least 7 continuous hours of rest in each 24-hour period and preferably between 10pm and 8am.
Ensure the commercial vehicle driver has access to medical or other appropriate assistance.
Develop policies covering fitness for duty in consultation with employees and unions.
Train commercial vehicle drivers in the risk factors that may affect fitness for duty and provide relevant control measures.
What if my operations do not conform to the regulations?
The Occupational Safety and Health Act and Regulations require that company / driver schedules must be designed “as far as practicable” to operate within the Regulations at all times. The operating standards in the Regulations offer significant operational flexibility and take into account remote area operations and the distances that must be travelled in WA.
Commercial vehicle drivers working to the maximum extent allowed by the regulations will in most cases be working to their capacity. This may mean that they are not able to maintain acceptable levels of alertness beyond the hours recommended in the operating standards. It is recognised however that there will be instances where some additional time is required, for instance, if a commercial vehicle has been held up due to unforeseen circumstances such as a road accident, and is a short distance from home, and the commercial vehicle driver is alert enough to safely complete the trip, then this may be acceptable, however where it becomes evident that it is a regular occurrence, the schedule must be adjusted accordingly.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 11 / 20

Commercial vehicle driver well-being
Readiness for duty
To meet the operating standards, readiness for duty means a commercial vehicle driver must be in a fit state for work when presenting for duty.
Commercial vehicle drivers should be aware of the impact of activities such as a second job, other driving, recreational activities, sport, insufficient sleep, consumption of alcohol and drugs, (prescribed or otherwise), and stressful situations. These will impact on a commercial vehicle driver’s well being, and capacity to work effectively. These activities may affect their state of fatigue, especially cumulative fatigue, and consequently their capacity to drive safely.
A clearly written company policy, developed in conjunction with commercial vehicle drivers should detail the importance of fitness for duty both at the start of and during work time. Procedures for checking with commercial vehicle drivers prior to commencing work should be considered. A
Company drug and alcohol policy for employees should be detailed. This policy does not have to include compulsory testing of commercial vehicle drivers. There are many existing examples that can be found to assist in putting a policy together. Alternative work should be considered for commercial vehicle drivers who report as unfit for duty. Does the company provide access to medical or other assistance? Commercial vehicle driver health and fitness
The health and fitness of commercial vehicle drivers is an important issue when considering how to manage the risk of ftigue. It directly affects a commercial vehicle driver’s ability to deal with the stresses and demands of the job. In turn, poor driver health can result in a number of consequences including the need to find a replacement commercial vehicle driver when a commercial vehicle driver is no longer able to work. It may also result in poor customer service due to late deliveries or rescheduling.
Some of the more common health problems that commercial vehicle drivers may experience include:
Obesity and heart disease – Being overweight or obese is strongly related to high cholesterol levels in the blood and high blood pressure. Both of these factors greatly increase the risks of having a heart attack.
Diabetes – Diabetes is an illness in which an individual’s blood sugar level is out of control. If not controlled, diabetes can make an individual feel fatigued. Diabetes can occur in anyone and at varying degrees, but it is easy to control. Being overweight and not exercising, strongly contribute to the development of diabetes.
Sleep apnoea – Sleep disordered breathing or apnoea is a serious problem for individuals that snore. In these people the windpipe collapses during their sleep resulting in too little air getting to their lungs. This wakes them up and usually wakes their partners as well. This can happen repeatedly during a night and results in poor and little sleep.
A health management system should be developed and implemented to identify and assist those commercial vehicle drivers who are at risk. The system should include medical history, sleep disorders (including those caused by the commercial vehicle drivers family or partner, broken sleep due to children’s needs etc), diet, alcohol, substance abuse or dependency and lifestyle. The system should also promote better health management. Commercial vehicle drivers are required to have medicals every three years. Commercial vehicle drivers who are required to undertake medicals for other purposes e.g. to transport dangerous goods or to fly a plane may not need to have an additional fatigue management medical.
Workplace conditions
Unsafe and unsuitable workplace conditions contribute to fatigue. The ergonomic design standards of a vehicle cabin are important if a commercial vehicle driver is to operate a vehicle safely. Unsuitable

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 12 / 20

depot facilities may prevent commercial vehicle drivers from having adequate rest and thus reducing the effects of fatigue. Operators should ensure workplaces comply with the Occupational Safety and
Health Act 1984, its associated regulations and relevant Australian Design Regulations (ADR’s)
To comply with the requirements of the Act and Regulations, workplace conditions should ensure, as far as is practicable, they meet Australian standards for seating and sleeping accommodation and in particular that: vehicle/ truck cabins are well ventilated; seating suspension is adjustable to the commercial vehicle drivers height and weight; vehicles used for sleep during periods of non-work time are equipped with appropriate sleeping accommodation; and depots provide safe and suitable rest facilities that meet occupational safety and health standards. Vehicles that operate north of the 26th parallel between 1 October and 31 March should be air conditioned and, if the vehicle is used as alternate sleeping accommodation the air conditioning should be able to run continuously while the vehicle is stationary.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 13 / 20

Training
Training is critical
Companies may developexcellent procedures to manage safety in their transport operations yet still have incidents and crashes due to employees not following those procedures. Crashes due to commercial vehicle driver fatigue are entirely preventable if correct scheduling practices are followed and there has been training and education on the causes and prevention of fatigue. Training is of critical importance in helping to ensure that correct procedures are known, understood and followed by all employees.
Training needs to be undertaken by commercial vehicle drivers, and all employees whose work contributes to the management of fatigue for commercial vehicle operations, covered by the company driver fatigue management plan. This may include those workers who schedule trips and develop commercial vehicle driver rosters. The training must be carried out according to the written procedures of the company.
Induction, refresher and further training are all necessary
When new employees join the company it is important that they undertake training to give them an immediate awareness of the company’s driver fatigue management plan. Further training in the procedures of the DFMP should then occur and certainly before a commercial vehicle driver undertakes any trips or rosters that involve 14 or more working hours. If there are any changes to procedures as the result of an investigation into an incident, or commercial vehicle driver feedback, then employees must be retrained in accordance with the revised procedures.
Refresher training at intervals for all employees should also be undertaken. Experience from around the world suggests that in a company some people are prone to, or more likely to be involved in incidents. Further training is one means to address this.
Form & content of training
Training should consist of formal, written, and on the job instruction, combining the theory with the practical application. For training to be effective there must be some means of objective assessment, to ensure that the person being trained has acquired the necessary competencies. This could take the form of a supervisor observing first hand that the person being trained follows the procedures correctly. In the case of a commercial vehicle driver it could include review of the trip records to assess the correct application of the company DFMP procedures.
DFMP training should include information on:
Duties imposed on individuals and operators by the fatigue management regulations
General duties imposed by the Occupational Safety and Health Act 1984;
Penalties associated with failure to comply with the Occupational Safety and Health Act 1984 and Regulations;
The causes of commercial vehicle driver fatigue, its symptoms and particular effects on heavy commercial vehicle safety including the direct and indirect costs;
The policy and procedural factors that may increase the risk of commercial vehicle driver fatigue during operations; and
The management of commercial vehicle driver fatigue including the use of napping, and strategies for making lifestyle changes.
The level and type of training required for any procedure should be to an agreed standard such as a competency standard. The training should enable a trainee to reach the required level of competence.
To achieve this it is desirable that the trainer has not only the required technical skills and knowledge of relevant truck and bus transport operations but also the training skills to impart this knowledge to

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 14 / 20

others
It is not appropriate to simply post a new procedure on a notice board or insert a new instruction in a manual. Management needs to be clear that employees understand the procedure, understand the need for the procedure, and can carry it out. Employees need the opportunity to ask questions and be satisfied with the response. It is particularly important to use examples that employees may be familiar with from within the industry. It is also important to recognize that some employees may not easily understand written instructions and a briefing or training session would assist them overcome any problems they may have.
Training provides the opportunity to reinforce the importance of a DFMP by pointing out the consequences of failure to observe procedures, and what our body is telling us. Examples of serious crashes that have occurred through failure to correctly manage commercial vehicle driver fatigue are a good way of achieving this. A good example is the following story told in the ACT Supreme Court

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 15 / 20

Operator sued for pushing commercial vehicle driver
Transport companies have been placed on notice after the ACT Supreme Court awarded $389,411 to a truck driver who crashed after being pressured to work excessive hours. The court was told his employer had made the truck driver drive 3671km in 3½ days, during which time he had been able to sleep for only 14 hours.
The court heard that the driver had arrived in Wagga around 9pm after driving several thousand kilometres in the previous days. Upon arrival in Wagga Wagga he had received a phone call from his supervisor telling him to hurry up because he had another job near Tumbarumba and he had to arrive there by 3.40am the following morning.
The driver said he had told his supervisor that he “was buggered” and could not do the job and he had been told. “Either you do the job or get your gear out of the truck. If you can’t handle the job, get out”.
The following morning the driver crashed his semi-trailer outside Tarcutta after falling asleep and suffered significant injuries, with rescue crews taking five hours to free him from the wreckage before he could be flown to hospital.
The case was heard in the ACT because the driver was treated at Canberra Hospital. In his May 23 judgement, Justice Terence Connolly found the Haulage Company had breached its duty of care to its employee and had failed to provide safe working conditions by ensuring he only worked a safe number of hours.
“Ordinarily, an accident which occurs in these circumstances might not be thought to give rise to a claim in damages, in that the accident could be said to have occurred solely due to the fault of the plaintiff in falling asleep at the wheel… [but] he fell asleep at the wheel because he was required to drive well in excess of safe hours and distances,” Justice Connolly said.
The driver was convicted for negligent driving by NSW Police, who said the basis of the accident was fatigue caused, by driving for excessive hours.
A report from Associate Professor, Ron Grunstein from the sleep disorders centre at Royal Prince
Alfred Hospital in Sydney presented to the court said truck drivers in Australia were frequently exposed to acute and partial chronic sleep deprivation. “This is frequently an occupational reality in the Australia Transport Industry,” the report found.
The court was also told drivers kept two logbooks, one that was false, to show to authorities they were complying with regulations. The company was ordered to pay the plaintiff $389,411 as well as his legal costs.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 16 / 20

Administration
Responsibilities
The success of a driver fatigue management plan is dependent on the commercial vehicle operator, their clients and commercial vehicle drivers knowing and carrying out their responsibilities and authorities, to ensure policies, procedures and contingency actions are performed as required by the
Driver Fatigue Management Plan. Responsibilities included in the driver fatigue management plan should be defined and written in to company position and job descriptions, which should be kept current. Documentation
Employers must keep records of all regular and irregular trips, commercial vehicle drivers’ schedules and rosters. These could be based upon trip sheets or pay records and delivery dockets. They must detail information in relation to work time, breaks from driving and non-work time, to demonstrate that the company and its commercial vehicle drivers are conforming to the Driver Fatigue
Management Plan, and the Occupational Safety and Health Regulations. Where appropriate, existing procedures and documentation should be used, however if it is necessary to develop new forms, it is wise to include samples as part of the plan.
In particular, documentation and records should detail how the company and its commercial vehicle drivers address the agreed operating standards and if the standards are not met, how control measures are put in place. Procedures for maintaining personnel records (kept on a confidential basis) should also be detailed. These records could include information on any work restrictions imposed, or applicable rehabilitation programs, and copies of current medical certificates. All those responsible persons at a workplace, such as managers, supervisors and commercial vehicle drivers should be trained in completing and maintaining the forms and documentation that support the DFMP.
Managing incidents
Fatigue leads to inattention and errors in judgement and may be an underlying cause of seemingly minor incidents. Fatigue, as a causal factor, should not just be considered in respect to serious crashes, as it could be contributing to minor incidents.
An incident reporting system increases the chance of a complete, competent and caring response to selected events. Incidents reports should include those causing injury or damage but just as important are those with potential to have caused serious injury or damage
A driver fatigue management plan should require all unsafe incidents to be recorded. Sufficient information should be collected to target unsafe practices and prevent future injuries and damage.
Company policies that promote and encourage all employees, sub-contractors and relief staff to report all unsafe incidents (including those that are potentially dangerous) should be developed, and a review of the DFMP for procedural shortcomings should be undertaken after any unsafe incident.

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 17 / 20

Reviewing the driver fatigue management plan
Audit & review the DFMP to ensure it is adequate
A policy and procedure for a DFMP may exist on paper, and training may have been provided but at the end of the day it is what actually happens that matters. Many companies are found wanting when a review or audit occurs and the true picture actually emerges. What actually happens may not be the
“safe system of work” that the policy and procedures specify.
A DFMP review should be undertaken following any unsafe incident, which either caused or had the potential to cause injury or damage. Random reviews should also take place to ensure procedures are being followed.
The purpose of a review is to ensure there is sufficient information gathered for action to be taken to prevent any future occurrence of the unsafe incident and those procedures are developed or modified to prevent any further harm or injury. There should be policies in place that promote and encourage all employees, sub-contractors and relief staff to report all unsafe incidents including those where there has been no injury or damage.
It is only by being thorough and ensuring all incidents are reported and risks are assessed and controlled that serious injuries and deaths will be prevented in the workplace.

Systems and methods of compliance
OPERATING STANDARD

COMPLY

Commercial vehicle driver is given at least 24 hours notice to prepare for working time of 14 hours or more.

[ ]

Continuous periods of work time do not exceed 5 hours.

[ ]

Flexible schedules permit breaks from driving or discretionary sleep.

[ ]

A solo commercial vehicle driver must have the opportunity for at least 7 continuous hours of rest in any 24 hours, preferably between the hours of 10pm and 8am.

[ ]

Maximise the opportunity for sleep to prepare for a trip by minimising very early departures. [ ]

Trip rostering practices
OPERATING STANDARD

COMPLY

Commercial vehicle driver does not exceed 168 hours working time in 14 days.

[ ]

Commercial vehicle driver has at least two periods of 24 continuous hours non-work time in 14 days, or 4 periods of 24 continuous hours in 28 days

[ ]

Minimise irregular or unfamiliar work rosters.

[ ]

An appropriate truck sleeper berth is available if sleeping in the vehicle.

[ ]

Minimise working time in irregular or unfamiliar work rosters.

[ ]

Minimise schedules and rosters that depart from day time operations when commercial vehicle drivers return from leave.

[ ]

Total non-working time is at least 27 hours in any 72 hours.

[ ]

Solo commercial vehicle driver has at least 7 continuous hours of rest in any 24 hour period (preferably between 10pm and 8am).

[ ]

Schedule allows for 20 minutes breaks from driving for every 5 hours work time.

[ ]

Minimum break from driving of at least 10 consecutive minutes after 5 hours work time. [ ]

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 18 / 20

Commercial vehicle driver readiness for duty policies
OPERATING STANDARD

COMPLY

A commercial vehicle driver is required to remain in a fit state for duty including not being impaired by alcohol or drug use.

[ ]

A written policy on fitness for duty developed with employees and unions.

[ ]

Commercial vehicle driver health practices
(including any relevant publications or information brochures)

OPERATING STANDARD

COMPLY

Commercial vehicle drivers’ health is assessed regularly by a suitably qualified medical practitioner to the NRTC or FORS medical assessment of commercial vehicle drivers standard.

[ ]

Medical assessment includes consideration of sleep disorders and other factors that contribute to fatigue.

[ ]

Identify health problems affecting ability to work safely, e.g. diabetes, heart disease.

[ ]

Provision of appropriate employee assistance programs where available.

[ ]

Commercial vehicle drivers are provided with information and assistance to promote management of their health.

[ ]

Workplace conditions
OPERATING STANDARD

COMPLY

A working environment meeting appropriate Australian Standards for seating and sleeping accommodation. (Minimum standard for truck sleeper berth is ADR 42, or in a tour bus/coach adequate sleeping accommodation as prescribed by relevant legislation). [ ]

A vehicle cabin should meet the requirement of the Occupational Safety and Health
Act 1984(including as a minimum ventilation in accordance with ADR 42.20 and seating suspension that is adjustable to a commercial vehicle drivers weight and height). [ ]

The commercial vehicle operator should ensure depots provide safe and suitable facilities that meet the requirements of the Occupational Safety and Health Act 1984.

[ ]

Truck cabins should be air conditioned where practicable, comfortable and the system checked before the trip commences.

[ ]

th
Vehicles used above the 26 parallel between 1October and 31 March are airconditioned, and if used as alternative sleeping accommodation while the vehicle is stationary, a system which can be run continuously should be provided.

[ ]

Training and education practices
OPERATING STANDARD

COMPLY

Duties imposed by the Occupational Safety and Health Act 1984.

[ ]

The penalties for failure to comply with the Occupational Safety and Health Act 1984

[ ]

Identify the causes of commercial vehicle driver fatigue.

[ ]

Recognise the symptoms of fatigue, develop strategies to enable better management and assist in making lifestyle changes, including conducting risk assessments and applying control measures.

[ ]

Prevention of commercial vehicle driver fatigue.

[ ]

All managers, supervisors and commercial vehicle drivers participating in the DFMP

[ ]

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 19 / 20

are trained in how to manage commercial vehicle driver fatigue, including factors that cause and affect fatigue.
How to develop and maintain a DFMP.

[ ]

Commercial vehicle operators management staff, commercial vehicle drivers and other employees involved in the operation of the DFMP are trained in the operation, administration and verification of the DFMP.

[ ]

DFMP operation, administration, verification and participation. Refresher training and education needs are identified, documented and provided to employees.

[ ]

Training and education programs are documented and employee participation is recorded. [ ]

Requirements for the responsible person at the workplaceand other staff involved in the management, operation, administration, participation & verification of the DFMP *
OPERATING STANDARD

COMPLY

The operator should develop the DFMP in consultation with commercial vehicle drivers and clients.

[ ]

Duties of the operator and commercial vehicle drivers under the Occupational Safety and Health Act 1984.

[ ]

Where appropriate the commercial vehicle operator or the responsible person at the workplace, should delegate staff to implement the DFMP.

[ ]
[ ]

Maintaining records of trip schedules, rosters, work time, breaks from driving and non-work time, and any other information necessary to demonstrate that the
Company conforms to its DFMP.
* Refer to section 57

Documentation and records
OPERATING STANDARD

COMPLY

A DFMP System documents how the company and its commercial vehicle drivers conform to the Operating Standards where practicable and when the standards are not met, how this is dealt with.

[ ]

Records that document all work time, breaks from driving and non work time, commercial vehicle driver’s schedules, including rosters.

[ ]

Records include all trips performed, including details of any trip alterations. They show sufficient information to determine that the company and the commercial vehicle driver have conformed to the DFMP.

[ ]

Personnel records that include copies of current medical certificates and applicable rehabilitation programs are kept on a confidential basis.

[ ]

Records are kept for a minimum of 3 years.

[ ]

Management of incidents
OPERATING STANDARD

COMPLY

Procedures are in place to monitor, record and investigate all incidents and to take corrective action as soon as is practicable.

[ ]

Sufficient information for action to be taken to prevent future occurrences of the identified cause of the unsafe incident.

[ ]

Company policies that promote and encourage all employees, sub-contractors and relief staff to report all unsafe incidents including those where there has been no injury or damage.

[ ]

Developing a Fatigue Management Plan for Commercial Vehicle Drivers and Operators ● 20 / 20

Amendments to the DFMP after made as a result of investigations into any unsafe incidents or serious accidents.

WorkSafe
Department of Consumer and Employment Protection
Locked Bag 14
Cloisters Square, Western Australia 6850
Phone (+618) 9327 8777
Email: safety@worksafe.wa.gov.au

[ ]

Similar Documents

Premium Essay

Management

...Assignment On- “The Evolution of Management Thought and The Patterns of Management Analysis” Submitted To: Professor Dr. Abu Hossain Siddique Department of International Business University of Dhak 9th Batch, EMBA Date of Submission: 4th July,2012 INTRODUCTION Although modern management theory dates primarily from the early twentieth century, there was serious thinking and theorizing about managing many years before. Two events are especially significant to management history. First, in 1776, Adams Smith published The Wealth of Nations, in which he argued the economic advantages that organizations and society would gain from the division of labor (or job specialization). The second important event is the industrial revolution. Starting in the late eighteenth century when machine power was substituted for human power, it became more economical to manufacture goods in factories than at home. These large, efficient factories needed someone to forecast demand, ensure that enough material was on hand to make products, assign task to people, direct daily activities, and so fort. That “someone” was managers, and these managers would need formal theories to guide them in running these large organizations. It wasn’t until the early 1900s, however, that the first steps were taken toward developing such theories. The evolution of modern management thinking begins in the nineteenth century...

Words: 6134 - Pages: 25

Premium Essay

Management

...Classical Management Theory (1900 – 1930) It was the rise of the Industrial Revolution and factories were becoming more common. Inside these factories, managers were constantly look for ways to improve productivity and efficiency. As time moved on, it became apparent that searching for the single best way to do things was the most important thing for managers to do. Thus, classical management theory was born. The Evolution of Classical Management Theory The Industrial Revolution was a time where innovation really began to change the way that products were produced and sold. The invention of machines to produce goods in the 19th century drastically improved productivity, which in turn lowered the cost to the consumer. The lower price resulted in a greater demand for products and thus a greater need for more factories and workers. As factories increased in number, managers continued to search for ways to improve productivity, lower cost, increase quality of their products, improve employee/manager relationships and increase efficiency. The focus shifted from using machines to increase productivity to how they could increase employee productivity and efficiency. When they did this, they began to notice some new problems inside their factory systems. Employees were dissatisfied with their current working conditions, and many lacked the necessary training for how to do their work efficiently. Managers then began to formulate and test possible solutions, one of which was to find...

Words: 952 - Pages: 4

Premium Essay

Management

...The formation of organization implies that a leader should take the role to control the activities of the group; the work done by the leader is what we call management. Organization is formed by a group of people who work together. No matter the organization is a profit making ones or non-profit making ones, its formations are to achieve a common purpose or variety of goals, which are the desired future outcomes. The outcomes might be producing a series of product or serving a group of target customers or satisfying others¡¦ needs. In these organizations, managers mainly are responsible to supervising the work performance of the group members and deciding the use of resources to achieve the organization’s goal. Management can be simply defined as getting things accomplished through other people. Management is then the term describe the work done by the manager, which are planning, organizing, leading and controlling the use of human and other resources, in order to help the organization to achieve a higher organization performance. Planning is to define to goals or targets of the organization and devising action plans to meet organization goals. Organizing is to determine what tasks should be done, arrange jobs to subordinates, controlling the budgeting and divided tasks to individuals or teams. Leading is to motivate staffs to work, maintaining the progress of activities and good relationship and to ensure to work done effective and efficient. Controlling is to measure...

Words: 3855 - Pages: 16

Premium Essay

Management

...Introduction to Management Technology BMRT 11009 - Section 300 Kent State University MANAGEMENT AMY HISSOM 10/26/2009 TABLE OF CONTENTS Introduction............................................................................................................................................ 3 Managers and Managing ........................................................................................................................ 4 What is Management?..................................................................................................................... 4 Essential Managerial Tasks............................................................................................................... 4 Levels and Skills of Managers ........................................................................................................... 4 Recent Changes in Management Practices ....................................................................................... 5 Challenges for Management in a Global Environment ...................................................................... 5 The Evolution of Management Thought ................................................................................................. 6 F. W. Taylor (1890-1940): Scientific Management ............................................................................ 6 The Gilbreths: Time-and-Motion Study ....................................................................................

Words: 3462 - Pages: 14

Premium Essay

Management

...What is Management? Definitions According to Harold Koontz, "Management is the art of getting things done through and with people in formally organised groups." Harold Koontz gave this definition of management in his book "The Management Theory Jungle". According to Henri Fayol, "To manage is to forecast and to plan, to organise, to command, to co-ordinate and to control." Henri Fayol gave this definition of management in his book "Industrial and General Administration". Image Credits © Michael Heiss. According to Peter Drucker, "Management is a multi-purpose organ that manages business and manages managers and manages workers and work." This definition of management was given by Peter Drucker in his book "The Principles of Management". According to Mary Parker Follet, "Management is the art of getting things done through people." Meaning of Management According to Theo Heimann, management has three different meanings, viz., 1. Management as a Noun : refers to a Group of Managers. 2. Management as a Process : refers to the Functions of Management i.e. Planning, Organising, Directing, Controlling, etc. 3. Management as a Discipline : refers to the Subject of Management. Management is an individual or a group of individuals that accept responsibilities to run an organisation. They Plan, Organise, Direct and Control all the essential activities of the organisation. Management does not do the work themselves. They motivate others to do the work and...

Words: 1096 - Pages: 5

Premium Essay

Management

...One of the first schools of management, the classical management theory, developed during the Industrial Revolution when new problems related to the factory system began to appear. Managers were unsure of how to train employees. A large amount of the non-English speaking immigrants or dealing with increased labor dissatisfaction caused managers to test solutions. According to Plunkett, Attner & Allen (2008) “The classical management focused on finding the “one best way” to perform and manage tasks” (p.38). This school of thought is made up of two branches: classical scientific and classical administrative. The scientific branch arose because of the need to increase efficiency and productivity. The emphasis was on trying to find the best way to get the most work done by examining how the work process was actually accomplished and by paying close attention to the skills of the workforce. The classical scientific school got its roots to several contributors, including Frederick Taylor, Henry Gantt, and Frank and Lillian Gilbreth. Whereas scientific management focused on the productivity of the certain individuals, the classical administrative approach emphasizes on the total organization. The emphasis is on the development of managerial principles rather than work methods. Contributors to this school of thought include: Henri Fayol, Max Weber, Mary Parker Follett, and Chester I. Barnard. During World War II, mathematicians, physicists, and others joined together to solve...

Words: 744 - Pages: 3

Free Essay

Management

...2.4 The Environmental Management System (EMS) application in the related industries. How it can improve the environmental performance of business? Example. 2.4.1 THE ENVIRONMENTAL MANAGEMENT SYSTEM (EMS) Definition: the environmental management system (EMS) refer to one part of the comprehensive management system that relate to organizational structure, planning activities and documented manner, it includes planning, implementation, checking, management review and environmental policy. An environmental management system (EMS) 1. It is environmental performance improving tool. 2. It is effective way to manage organizational companies. 3. Manage organizations to solve environmental problems, like allocation of resources, assignment of responsibility and ongoing evaluation of practices, procedures and processes. 4. Manage the long-term or short-term environmental impact of products service and processes for organizations. 5. Continual improvement is emphasis. EMS Model Plan Act Do Check Step 1: plan (planning) Definition: planning is a way of establish objectives and processes requirement. In order to implement ISO 14001, the first step is suggestion, to help to classify all the current or future operation elements. It includes environmental aspects, compliance, objectives and targets, environmental management programs (EMP). Business firms should plan for environmental protection. They need to plan their current operation or even future operation. The...

Words: 3017 - Pages: 13

Premium Essay

Management

...Management is universal in the modern industrial world. Every industrial organization requires the making of decisions, the coordinating of activities, the handling of people, and the evaluation of performance directed toward group objectives. In addition, our society simply could not exist as we know it today or improve its present status without a steady stream of managers to guide its organization. Peter Drucker makes this same point in stating that effective management is quickly becoming the main resource of developed counties and the most needed resource of developing ones (Certo, 1986). In short, management is very important to our world. Then, what is management? This essay will discuss this topic as following. It has to be recognized that the definitions of management are extremely broad. Harbison and Myers (1959) offered a concept for emphasizing a broader scope for the viewpoint of management. They observe management as an economic resource, a system of authority, and a class or elite from the view of the economist, a specialist in administration and organization, and sociologist respectively. Henri Fayol, “the father of modern management theory,” formulated fourteen principles of management. Hugo Munsterberg applied psychology to industry and management. Max Weber is known for his theory of bureaucracy. Vilfredo Pareto is considered “the father of the social systems approach.” Elton Mayo and F.J. Roethlisberger became famous through their studies of the impact...

Words: 296 - Pages: 2

Premium Essay

Management

...Restaurant Managers are responsible for controlling profitability, optimising restaurant management and overseeing sales, human resources and team management in their respective stores. Profile • Displays managerial and leadership qualities • Autonomous employees who enjoy taking an initiative • Well organised individual • Self-controlled, disciplined and highly driven Operations management (OM) can be defined as "Managing the available resources by designing, planning, controlling, improvising and scheduling the firms systems & functions and thereby deliver the firm's primary product & services. " It has been an integral part of manufacturing and service organisation and is aimed at timely delivery of finished goods & services to the customers and also achieving it in a cost effective manner. It consist of an amalgamation of different functions including quality management, design & industrial engineering, facility and channel management, production management, operational research, work force management, enhancing product design, improvising productivity, and improve customer services. The traditional McDonald's philosophy that acts as the guiding force behind it's operational make-up is "Quality, Service, Cleanliness and Value". The importance of operation management can be divided into three broad categories:- Assistance in Strategic Decisions (Long term):- Operation management decision at the strategic level affect McDonald's effectiveness to address customers...

Words: 1212 - Pages: 5

Premium Essay

Management

...Introduction to Management and Organizations True/False Questions A MANAGER’S DILEMMA 1. Today’s managers are just as likely to be women as they are men. (True; moderate; p. 4) 2. Management affects employee morale but not a company’s financial performance. (False; easy; p. 4) WHO ARE MANAGERS? 3. In order to be considered a manager, an individual must coordinate the work of others. (True; moderate; p. 5) 4. Supervisors and foremen may both be considered first-line managers. (True; moderate; p. 6) WHAT IS MANAGEMENT? 5. Effectiveness refers to the relationship between inputs and outputs. (False; moderate; p. 8) 6. Effectiveness is concerned with the means of getting things done, while efficiency is concerned with the attainment of organizational goals. (False; moderate; p. 8) 7. A goal of efficiency is to minimize resource costs. (True; moderate; p. 8) 8. Efficiency is often referred to as “doing things right.” (True; moderate; p. 8) 9. Managers who are effective at meeting organizational goals always act efficiently. (False; difficult; p. 8) WHAT DO MANAGERS DO? 10. The four contemporary functions of management are planning, organizing, leading, and controlling. (True; easy; p. 9) 11. Determining who reports to whom is part of the controlling function of management. (False; easy; p. 9) 12. Directing and motivating are part of the controlling function of management. (False; moderate; p. 9) 13. Fayol’s management functions...

Words: 6792 - Pages: 28

Premium Essay

Management

...Past Influence of Management Today Abstract The past influence of management was done with bureaucracy and Administrative ways that gives management today to achieve their goals for the organization. Bureaucratic management may be described as "a formal system of organization based on clearly defined hierarchical levels and roles in order to maintain efficiency and effectiveness." Administrative has to foresee and make preparation s to meet the financial commercial and technical condition s under which the concerns must be started. How Bureaucratic and Administrative Management Affects Overall Management Bureaucracy Bureaucratic management focuses on the ideal form of organization. Max Weber was the major contributor to bureaucratic management. Based on observation, Weber concluded that many early organizations were inefficiently managed, with decisions based on personal relationships and loyalty. Also, bureaucracy formed the need for organizations to operate rationally rather than relying on owners’ and managers. (Williams’s pg. 31) this brings Jobs are divided into simple, routine and fixed category based on competence and functional specialization. Officers are organized in a n hierarchy in which higher officer controls lower position holders i.e. superior controls subordinates and their performance of subordinates and lower staff could be controlled. All organizational...

Words: 864 - Pages: 4

Premium Essay

Management

...conceptual skills, interpersonal skills, and technical skills. These three managerial skills are used by different managers in different degrees. Successful managers usually display more conceptual than technical skills. They have to continuously think about the company's goals and objectives and how they can be effectively communicated to employees. Middle Level Management Middle management is the intermediate management level accountable to top management and responsible for leading lower level managers. Image of Middle managers fig. 1 Middle managers Middle management is the intermediate management of a hierarchical organization, being subordinate to the senior management but above the lowest levels of operational staff. Key Points Middle management is the intermediate management of a hierarchical organization, subordinate to the senior management but above the lowest levels of operational staff. They are accountable to the top management for their department's function. They provide guidance to lower level managers and inspire them towards better performance. Middle management may be reduced in organizations as a result of reorganization. Such changes include downsizing,...

Words: 635 - Pages: 3

Premium Essay

Management

...Management Practice and Theory Student’s name: Instructor’s Name: Class Name and Code: University: Date of Submission: TABLE OF CONTENTS Executive Summary …………………………………………………………………… iii Introduction ……………………………………………………………………………. 4 Organisation Effectiveness ……………………………………………………………. 5 Team Effectiveness …………………………………………………………………… 6 Management Theories ……………………………………………………………….... 8 Command and Control ………………………………………………………………… 9 Scientific Management ……………………………………………………………….. 10 Bureaucratic Organisation ……………………………………………………………. 11 Subordination to Community ………………………………………………………… 11 Management as a discipline ………………………………………………………….. 12 Conclusion …………………………………………………………………………… 12 References …………………………………………………………………………... 13 Executive summary A professional manager will acknowledge the contribution of team effectiveness to overall organizational success. Teams will often require leaders to ensure delegation and coordination of group activities for a team to attain the desirable results. This paper seeks to establish influence of management theories on a professional manager both at team and organisation level. The management theory adopted by a leader will determine their style of leadership thus their relationship with employees and other key stakeholders. Introduction A team is a small group of workers with complimentary expertise who share common goals whereby group interests precede over individual interest. Teamwork is essential in organisations...

Words: 2903 - Pages: 12

Premium Essay

Management

...management In general, management is the activity of resolving a disorderly situation into an intentionally orderly situation, to achieve pre-determined (i.e., purposeful) outcomes. Since disorder continuously arises from creativity, destruction, decay, variance, versioning, chaos, and other natural and intentional changes, resolving that disorder into an intended order requires continuous tracking and adjustments in the "architecture" of the intended order's parts, part relationships, and part and relationship attributes. The classic approach to management Classical approach to management is dated back to the Industrial Revolution. the classical approach was an approach that places reliance on such management principals as unity of command, a balance between authority and responsibility, division of labor, and delegation to establish relationships between managers and subordinates. This approach constitutes the core of the discipline of management and the process of management. The classic approach to management – Classical approach - consists of two separate branches: the scientific and administrative management. The achievements of the classical school - the school has created a basis for further development of management theory, identified key processes, functions and leadership skills, which today are considered significant. Limitations of the classical school - more suitable for stable and simple organization of the modern and dynamic. Often recommended...

Words: 463 - Pages: 2

Premium Essay

Management

...INTRODUCTION In thinking about an ideal Total Quality Management (TQM) in a government organization of the 21st century, what follow is innovation, globalization, and a new culture that organizations need to adapt constantly to meet new market situations and competitive business world. "TQM refers to a management process and set of disciplines that are coordinated to ensure that the organization consistently meets and exceeds customer requirements. It allows organizations to survive the global business competition and allows for a continuous improvement (kaizen) to the needs of the rapidly changing world by having organizations move from the current way of doing things to a new and possibly different way of doing things based on systematic management of data of all processes and practices that eliminates waste. TQM require engagement of all divisions; departments and senior management to organize all its strategy and operations around customer needs and develops a culture that allows employee participation. For service organizations, TQM has become a philosophy of management that is driven from the continuous improvement of customer satisfaction that offers meaning to an organization existence in delivering meaningful services to customers and satisfaction and growth to members of the organization. It is from this premises that TQM strategy is to achieve excellence in quality service, low cost, high productivity and organizational effectiveness [Evans, J & Lindsay, W. 2008]...

Words: 2527 - Pages: 11