Free Essay

Owning a Buisness

In:

Submitted By vannah2015
Words 1289
Pages 6
BATTERY SAFETY AND OHMS LAW

Battery Safety Basics-
Do not overcharge or over-discharge.
When the charger indicates that the batteries have been fully charged, you can remove them from the charger. Leaving batteries in a charger all night long or longer can cause them to be overcharged, which can result in battery failure (depending on the charger). Charging your battery over 4.25 volts can shorten its life-cycle and going over 4.5 volts can cause it to burst. Cease using your charger if this ever happens.
Our recommendation on a good charger: Nitecore D2 Charger (2 Bay) or Nitecore D4 Charger (4 Bay) Efest LUC (2 Bay) Efest LUC (4 Bay) Efest Soda (2 Bay)
Recharge batteries with a resting voltage below 3.6V as soon as possible.
Leaving LiIon batteries in a discharged state will incur irreversible damage – creating a loss in capacity and a loss in cycles.
Determining the exact voltage can be tricky, unless you have a Tank-O-Meter/Volt Meter. If you are building your own coils a Tank-O-Meter is great device to have because you can use it to test your coils and your batteries. Sure, you can always use a battery tester, but the majority of battery testers are not equipped for the types of batteries that are used in mods, or even test batteries under load condition.
Do not short circuit your batteries.
Short circuiting can cause a huge surge of current that will potentially burn out your battery, damage your mod, or even your face!
Short circuits happen when the voltage from a battery is discharged through a low resistance wire at a discharge rate that exceeds the battery’s upper amp limit. Short circuiting a battery is very close to what a mechanical mod with a sub-ohm coil is doing, except you are trying to keep the resistance under the upper amp limit – there’s a fine line that you have to be careful of when sub-ohming.

Do not let your batteries touch each other or other metallic items.

Keeping your batteries loose, such as in your pockets, is a good way to have your batteries fail and seriously harm you. There are battery holders and covers to keep your batteries safe. Get some – now.

Do not dispose any battery in a fire.

This is just common sense people. There are dangerous chemicals in batteries. If you try to burn your batteries they’ll release dangerous fumes and will probably explode. Do yourself, and the rest of the world, a favor by taking your old batteries to a battery recycling center.

What’s In a Name?

Let’s take a look at the specifications of AW IMR batteries for a moment:

IMR16340 Specifications:

Nominal Voltage : 3.7V
Capacity : 550mAH
Lowest Discharge Voltage : 2.50V
Standard Charge : CC/CV ( max. charging rate 1.5A )
Cycle Life : > 500 cycles
Max. continuous discharge rate : 4A
Operating Discharge Temperature : -10 – 60 Degree Celsius

IMR14500 Specifications:

Nominal Voltage : 3.7V
Capacity : 600mAH
Lowest Discharge Voltage : 2.50V
Standard Charge : CC/CV ( max. charging rate 1.5A )
Cycle Life : > 500 cycles
Max. continuous discharge rate : 4A
Operating Discharge Temperature : -10 – 60 Degree Celsius

IMR18350 Specifications:

Nominal Voltage : 3.7V
Capacity : 700mAH
Lowest Discharge Voltage : 2.50V
Standard Charge : CC/CV ( max. charging rate 2A )
Cycle Life : > 500 cycles
Max. continuous discharge rate : 6A
Operating Discharge Temperature : -10 – 60 Degree Celsius

IMR18490 Specifications:

Nominal Voltage : 3.7V
Capacity : 1100mAH
Lowest Discharge Voltage : 2.50V
Standard Charge : CC/CV ( max. charging rate 3A )
Cycle Life : > 500 cycles
Max. continuous discharge rate : 15C
Operating Discharge Temperature : -10 – 60 Degree Celsius

IMR18650-1600 Specifications:

Nominal Voltage : 3.7V
Capacity : 1600mAH
Lowest Discharge Voltage : 2.50V
Standard Charge : CC/CV ( max. charging rate 4.5A )
Cycle Life : > 500 cycles
Max. continuous discharge rate : 15C
Operating Discharge Temperature : -10 – 60 Degree Celsius

IMR18650 -2000 Specifications:

Nominal Voltage : 3.7V
Capacity : 2000mAH
Lowest Discharge Voltage : 2.50V
Standard Charge : CC/CV ( max. charging rate 2A )
Cycle Life : > 500 cycles
Max. continuous discharge rate : 10A
Operating Discharge Temperature : -10 – 60 Degree Celsius

Determining Your Maximum Discharge Rate

The most important specification to pay attention to is the “Max. continuous discharge rate” for each battery. Each battery has a number and a letter, either measured as A or C (30 Amps or 15C). Look at the IMR18650-1600 for example. If your battery has a maximum continuous discharge rate of 15C, this means the battery is rated for 15 times the capacity of the battery measured in amps. So a battery that sits at 1600mAh, which equals 1.6Ah will have a max continuous discharge rate of 15 X 1.6 = 24A. There is a chart below which has the max continuous discharge rate in Amps of some common batteries.

You should always determine what your max continuous discharge rate is in Amps (which many of the new and popular batteries have already) to keep your math consistent and mind at ease.

How To Use This Information Effectively

Knowing the max discharge rate in amps is only half the battle.

How do you know if your coil or atomizer/clearomizer/cartomizer won’t short circuit your battery? Simple, use this equation: battery volts / the ohms resistance of your coil = your actual discharge rate.

If your actual discharge rate is less than the maximum discharge rate you calculated earlier, you’re in the clear. If it’s not, you need to suck it up and rebuild a higher resistance coil.

Let’s take a closer look using the 18650 1600mAh battery again (for the sake of continuity). If you took a freshly charged 18650 1600mAh battery and tossed it in your mechanical mod with a very limited voltage drop, and put a .2 Ohm coil on top, you’d be running at 20 amps. To figure out this math you take the voltage running to your coil from your battery, which lets say after a full charge, the multimeter shows that the battery is sitting at 4 volts. Now, divide by the ohms of your coil. The number you get is your total amps. In this case our math is 4/0.2 = 20. So we now know that running this exact setup will push our battery to 20 amps, just 4 amps under its max discharge rate. If you were using a different battery capable of less power under the same circumstances, you would be asking for complete battery failure and the chance of possibly hurting yourself.

Safety PSA: Resistance in coils can have a variance of 0.2 Ohms in either direction, or +/- .2 Ohms. This means that if you build a 0.2 Ohm coil, you have to account for that +/- 0.2 Ohm variance. The coil in the above example at .2 Ohms is an incredibly unsafe coil, and I would not use nor suggest that anyone use such a coil. Because of this, I would not recommend anything lower than a 0.4 Ohm coil for 18650 1600mAh battery.

Equation Recap

Let’s take a look at everything you’ll have to calculate in order to determine your coils safety in order.

1. Calculate your battery’s capacity in amps: capacity in mAh / 1000 = capacity in amps

2. Calculate the maximum discharge rate if measured in C: maximum discharge rate = (battery capacity in amps) x (continuous discharge rate)

2. Measure your battery’s volts with a multimeter.

3. Measure the Ohms of your coil and subtract .2 to account for the +/- .2 variance.

3. Calculate the discharge rate you’ll have with the coil you’ve built: battery volts / Ohms = your actual discharge rate

4. Check to make sure that the actual discharge rate is LOWER than your battery’s maximum discharge rate.

Similar Documents

Free Essay

Owning a Buisness

...Juice Bar project 1) U.S. sales of organic food and beverages have grown from $1 billion in 1990 to $26.7 billion in 2010. Sales in 2010 represented 7.7 percent growth over 2009 sales. Experiencing the highest growth in sales during 2010 were organic fruits and vegetables, up 11.8 percent over 2009 sales. Organic food and beverage sales represented approximately 4 percent of overall food and beverage sales in 2010. Leading were organic fruits and vegetables, now representing over 11 percent of all U.S. fruit and vegetable sales. According to Organic Monitor estimates, global organic sales reached $54.9 billion in 2009, up from, $50.9 billion in 2008. The countries with the largest markets are the United States, Germany, and France. The highest per capita consumption is in Denmark, Switzerland, and Austria. 2) The growth in popularity of juice bars has been directly related to the push for more health conscious beverages. Many juice bars offer healthy 'boosts' or mix-ins, which add to their popularity. Juice and smoothie bars are popping up everywhere--in gyms, airports, grocery stores, cafes, malls and college cafeterias. Soaring juice sales and growing demand for healthy, natural produce make the consumer market ripe for juice bar businesses. If you are thinking about starting up a juice bar business, you will need to study the market and competition, and acquire the necessary licenses and permits. You may also want to consider hiring a consultant with a track record of helping...

Words: 345 - Pages: 2

Premium Essay

William Wilberforce - "Take Up the Fight"

...William Wilberforce is remembered today for his long Parliamentary campaign for the abolition of the slave-trade. It was a difficult task while he had ties with the church, you see, the church had invested a great amount of money in the slave buisness of Africa and West India. On March 25th of 1807, the Act of Parliament for Abolition finally received the Royal Assent and became law. (Blah blah blah) However that was not the end of slavery. The law strictly prohibted the trading of human beings, not the right to owning them as property. Wilverforce was born inn Yorkshire, 1759, an only child. His father was a wealthy merchant, his grandfather had made a fortune in maritime trade, and had been elected mayor of hull twice. He spent most of his younger life in boarding schools. While away he became interested in the church and what it had to offer. His beliefs greatly different from the church and those around him, but that did not detur him from making a change in the church. The book William Wilberforce - "Take Up the Fight covers a large amount of smaller fiction* events in his life, while still keeping his story as close to the truth as possible. Throughout the story he spends his journey convincing parliment of the negative consequences of slave trading, and how the Bible tells us it is wrong. It ranges from the time of his birth, his time with his aunts and uncles he stayed with while he was attending school, to the time he spends in his later life as he...

Words: 302 - Pages: 2

Premium Essay

Identify Risks to Agency Operations

...Identify risks to agency operations Task 1 Find a newspaper/magazine/internet article that relates to one of the risks to agency operations (economic, financial, social, technology, human behaviour, occupational health and safety, legal, political, social, property and equipment, environmental and natural events). Using the table below, say how the subject of the article will possibly affect the business, it’s likelihood, consequences, level of risk and what steps could be taken to minimise or transfer the risk: |Newspaper/magazine/internet article: | | | |Business risk is the risk which is associated with core business activities, for example, Demand creation, supply, operations, production, raw | |material procurement etc. If an organization fails to properly manage these activities then the probability of impact of these failures on revenue| |becomes too high and the business can loose some part of its sales. Due to lower revenue the profits of business gets negatively impacted, | |particularly in case where Fixed Cost is very high the magnitude will be very high.  | |while on the other side, financial risk is associated with the debt level...

Words: 1532 - Pages: 7

Premium Essay

Wal-Mart Good or Bad for America

...Is Wal-Mart Good For America? Introduction We all want to do what is best for our families, our friends, ourselves and our country. However, our nation’s number one corporation is under constant ridicule for being a negative part of the American way. Wal-Mart is the overall number one on the fortune 500, over taking Exxon Mobile after a one year slip to the number 2 spot. However Wal-Mart is constantly being ridiculed by media and everyday citizens, its employees included. These opinions are often brought forth because of four major issues; the pay and benefits packages of Wal-Mart employees, the quality and buying of their goods from China, big box corporation killing local businesses ,and Wal-Mart taking jobs away and not creating new, stronger jobs .To answer each question I will use research from many different mediums, financial statements, and my personal experience as a three year Wal-Mart employee, and present facts and numbers that would be crucial in making an educated decision, following this information I will present what I believe is strong and weak about Wal-Marts current way of doing business, and then offer my solutions to answer these questions and answer the big question. Is Wal-Mart good or bad for America? Does Wal-Mart Treat Their Employees Right? As a Wal-Mart employee, I have gotten to see how things are ran, how we receive the goods, how they are taken to the floor, how it is stocked, and cleaned. I have been an overnight stocker at one of the...

Words: 6224 - Pages: 25

Premium Essay

Business

...Discussion paper Do you agree with the concept that there is only one social responsibility of business- to use it's resources and engage in activities to increase it's profits so long as it stays within the rules of the game, which is to say, engages in free and open competition without deception or fraud? I feel that businesses have an obligation when it comes to social responsibilities to not only act ethically but to act responsibly when it comes to all business engagements. I don`t agree with the Idea of a business being created just for the idea of making money but I believe that the core of each business should be to improve the lives of others and their surroundings. If the cocept of others are placed in the heart of each business and if the businesses abide by it, then the amount of deception, fraud, and the lack of ethics that may be found in business today will dramatically decrease.I don`t think that there is only one social responsibility of a business but there are a few responsibilities that businesses should take in and apply. I can`t think of all the responsibilities because it can change do to the nature of the business, but a couple things that should always be the priority for all businesses are to take care of the workers and the customers. If the business can keep their workers and the customer happy, then it will be a foundation for a successful business."A firm that consistently fulfills its social obligations makes itself a desirable member of the community...

Words: 6647 - Pages: 27

Free Essay

Social Networking

...Social Networks THE NEXT GENERATION David A. Smith Chief Executive Global Futures and Foresight November 2010 Social Networks The next generation Contents Foreword Introduction 2 Chris van der Kuyl 3 David Smith Executive summary 1. 2.1. 2.2. 3.4. 3.5. History of social networks in the digital age in the UK. The present state of social networks. Innovative uses of social networks in today’s society o B2C - Business to Consumer o B2B - Business to Business o P2P - Person to Person (Peer to Peer) o G2C - Government to Citizen Key trends shaping the future of social networks 1. Broadband penetration 2. Rise of mobile technologies 3. Ambient technology - the 'internet of things' 4. 24/7 lifestyle 5. Data expansion 6. The future of the net: web v apps 7. Geo-spatial and augmented reality technologies 8. New era of mass communication 9. New business era 10. Trust 11. Education 12. Older social networkers 13. Gaming and virtual reality 14. Government intervention Tomorrow’s consumer o B2C - Business to Consumer o E-Government and the 'Big Society' o Educational networking o Social studies o Gaming and virtual worlds The evolution of social networks o Technological progress o Business models and revenue streams o From the web to the street o Privacy/security/ permissive marketing o Digital Asset Management o Longevity of digital assets o Impact on advertising Changing...

Words: 15628 - Pages: 63

Premium Essay

Lean Management

...THE ROLE OF LEAN MANUFACTURING AND LEAN TECHNIQUES IN THE SUCCESS OF AN ORGANIZATION ACKNOWLEDGEMENT Requirements of this project were rather stringent as sufficient knowledge of the topic was not enough. It was also necessary to have abundance of devotion and willpower together with an ability and willingness to perform hard labour for successful completion of this project. It would be unfair on my part not to acknowledge the contribution of all those who had encouraged me all through and kept my spirits from flagging and that include my parents, friends and well wishers. These people, though not directly involved with the project, did most certainly provide the ambience that was sorely needed while undertaking such a strenuous task. I feel extremely fortunate that I had Mr/Ms Xxxx as my project leader and cannot thank him/her more for the unstinted encouragement I had received throughout this period. If his/her suggestions that resulted in necessary and timely course corrections were not there, I doubt very much whether this project would have at all seen the light of the day, let alone being successfully completed within the deadline. ABSTRACT The word that is most significant in Lean Manufacturing process is ‘lean’ which literally means a body or a system that does not have any unnecessary or avoidable flab or float. Such flab or float exists in manufacturing systems and are manifested through unnecessary or nil value movements or costs that do not add to the final...

Words: 22914 - Pages: 92

Free Essay

Dhfjf

...Hybrid Cars IQP        A Study on Hybrid Cars:   Environmental Effects and Consumer Habits    An Interactive Qualifying Project to be submitted to the faculty of Worcester Polytechnic  Institute in partial fulfillment of the requirements for the Degree of Bachelor of Science.    Submitted By:  Michael Beliveau  James Rehberger  Jonathan Rowell  Alyssa Xarras    Submitted to:        Submitted: 28 April 2010   Project Advisor:    Prof. Chickery Kasouf        1  Hybrid Cars IQP  Table of Contents  List of Figures ................................................................................................................................................ 4  Abstract ......................................................................................................................................................... 5  Executive Summary ....................................................................................................................................... 6  Chapter 1.  Chapter 2.  Introduction .......................................................................................................................... 9  Literature Review ................................................................................................................ 12  2.1 Environmental Effects ....................................................................................................................... 12  2.2 Emissions ............................................

Words: 33283 - Pages: 134