ITN 200 Week 6 Labs Activity 8-5: Checking the DNS Server and Client Services We begin with Services from the Configuration option here and it shows a list of Services I switch to the Standard tab from the Extended tab and I locate the DNS Client and Server, with its Startup type set to Automatic, as shown below After viewing the DNS Client properties I click on the stop button to stop and restart the service with the status showing stopped Here, I click Start and double-click the DNS
Words: 413 - Pages: 2
NETW410 Network Design Lab Scenario The following description of a network will be used for a series of network design problems that have been incorporated into the NETW410 weekly labs. Description of the Organization The organization in question is a community college with a single multibuilding campus. As the local area grows in population, this campus is experiencing a corresponding growth in enrollment. In order to meet this growth in on-campus students as well as accommodate the demand
Words: 985 - Pages: 4
2008 4. IP address range 192.10.20.0 223.255.255.255? Class C 5. What is this format 10.45.100.26 ? dotted decimal format 6. As we move from IPv4 to IPv6, what is the most important thing focused on? IP security 7. Each Host on your network has a what as a non-changeable function? Routing Method 8. If you have a DHCP server, how would you obtain an ip address? Static 9. Multiple physical disks with space across it? Spanned volumes 10. The style
Words: 325 - Pages: 2
Network Addressing. 1. As per the requirements of the University of Maryland University College, networks will be divided into two separate subnets using 10.11.0.0/16 as the network addresses for all computers on the network. The two subnets will be divided to differentiate computers accessed by students from those of the staff, whom will have greater access to the network, data, and intellectual property. The two subnetted networks will be 10.11.1.1 - 10.11.0.255 and 10.11.2.1 - 10.11.2.255
Words: 1076 - Pages: 5
UMUC’s new network lab will consist of servers, hubs, routers, computers, an IDS (Snort), and Norton Firewall and Virus Scan software. The safety and security of the network is of the utmost importance. In surveying the site, a number of limiting factors were identified, most notably, the absence of locations for hub to serve as repeaters for locations in far corners of the building. It is for this reason I have decided to use Fiber Optic cable. The limitations of fiber are not as pronounced
Words: 333 - Pages: 2
something like this 1000:20g6:501a:6601:at6j:8236:T9D6:543ah. 2. The subnet mask of an IP b. Defines network and host portions of and IP address. IPv4 addresses have two parts to them: one part identifies the network and the other part identifies the specific machine or host within the network. Within a string an IP address the first two are the network address and the second two are the host address. 3. The private IP address of a. 192.156.90.100 cannot be routed across the internet. As the world
Words: 310 - Pages: 2
Provides access to all other router commands * Router(config)#: global configuration mode = Commands that affect the entire system * Router(config-if)#: interface mode = Commands that affect interfaces * Router(config-subif)#: subinterface mode = Commands that affect subinterfaces * Router(config-line)#: line mode = Commands that affect in lines modes (console, vty, aux…) * Router(config-router)#: router configuration mode Changing switch hostname: Switch(config)# hostname
Words: 699 - Pages: 3
From the back yard we are having the ISP do the installation of the cabling. There will be Fiber Optics running to the server room that will be connected to the switches and router. From there we will have Cat6 connected to the Rj45’s in each area we have the wall mounts on. In port 1 we have the living room where there will be VoIP phones and an access point. The VoIP phone will have an DHCP reservation but is set to static. The Access point will have two devices connected to it which will be two
Words: 420 - Pages: 2
half Sales office and half Business office users • 2 subnets - Separate LANs within the office 30 hosts per subnet (25 employees, 1 printer and 2 servers, and 2 more available addresses. • 2 network printers, one per subnet • 1 connection to the WAN/Internet • One core router with 2 Ethernet interfaces (one for each existing subnet) and one Serial for WAN • Each subnet using one switch for all hosts • Plan for growth for up to 6 subnets - which do not need to be in the diagram Identify the different
Words: 438 - Pages: 2
network, wireless network, and a network for future services to accommodate the potential 50% growth the company intends to happen. The subnet range that should be used to accommodate 145 hosts plus a potential 50% growth within the next two years should be 255.255.255.0. This subnet mask range would support 254 hosts and this particular scenario is only planning for no more than 218. The IP addresses should be statically assigned because dynamically assigned IP addresses can change each time you
Words: 255 - Pages: 2
