... Healing health care focus of the need of the entire being rather than focusing on curing the physical ailment. This concept advances the idea that apart from addressing the physical needs, the healing process should also address the patient’s emotional and spiritual needs. The healing hospital paradigm is made up of three major components; these include; a culture of loving care, a healing physical environment and an integrated work design and technology. However, there are several challenges experienced when attempting to implement the healing environment in the traditional hospital environment. This paper will discuss the components of healing hospitals and the challenges involved in implementing the healing environment. Components of a Healing Hospital Healing hospital paradigm lays more emphasis on the patient’s healing environment. This includes the kind of care the patient is receiving and the conditions the patient is exposed to when receiving treatment (Samueli Institute, 2010). Under the healing hospital paradigm, provision of care is not only limited to provision of medical intervention procedures and medication but also come down to how medical caregivers engage the patients and their relatives in the treatment process. This concept is based on the idea that emotional and spiritual wellbeing contributes to physical well being. According to this paradigm, the physical body, the mind and the spirit make up one body and all this parts must be well if the whole person...
Words: 1197 - Pages: 5
...CIS 417 WEEK 4 ASSIGNMENT 2 FORENSIC LAB DESIGN To purchase this visit here: http://www.activitymode.com/product/cis-417-week-4-assignment-2-forensic-lab-design/ Contact us at: SUPPORT@ACTIVITYMODE.COM CIS 417 WEEK 4 ASSIGNMENT 2 FORENSIC LAB DESIGN Imagine the university that employs you as an information security professional has recently identified the need to design and build a digital forensic laboratory. You have been tasked with designing the lab for the organization. Write a four to five (4-5) page paper in which you: 1. Explicate the steps you would take to plan a budget for the lab, keeping in mind the general business objective to avoid unneeded costs. 2. Recommend the physical requirements and controls that you would consider implementing in order to keep the lab safe and secure. 3. Identify at least three (3) hardware and software tools that you would include in the design of the lab and explain your reasons behind your choices. 4. Identify the high-level criteria that would be considered when selecting the forensic workstations to be utilized. More Details hidden… Activity mode aims to provide quality study notes and tutorials to the students of CIS 417 Week 4 Assignment 2 Forensic Lab Design in order to ace their studies. CIS 417 WEEK 4 ASSIGNMENT 2 FORENSIC LAB DESIGN To purchase this visit here: http://www.activitymode.com/product/cis-417-week-4-assignment-2-forensic-lab-design/ Contact us at: SUPPORT@ACTIVITYMODE.COM CIS 417 WEEK...
Words: 640 - Pages: 3
...phase and deliverable. Activities/Tasks: Figure 7.3 – This figure list the activities/tasks that must be completed to produce each deliverable. Resource Assignments: IT Project Manager The Project Manager is in charge of the workflow of the entire project. The role of the Project Manager comprises of tasks in every facet and phase of the project and is responsible for the final two steps of the project. In addition to these roles, the Project Manager also works directly with the client and project sponsor to ensure the project progresses as planned and that the needs of the client are met. Database Specialist The Database Specialist is responsible for planning, implementing, and maintaining the system’s physical database. Participates in the Conceptualization step by...
Words: 599 - Pages: 3
...and must be done in a particular manner. Thus having the right application architecture is important where the design is concerned. Because the company has one large data center that each office connects to via a wide area network (WAN), hence the appropriate architecture for this solution would have to consist of a WAN diagram to be used in management of this project, along with system documentation, and information technology architecture documents to provide a visual representation of the network. A wide area networks (WANs) usually covers a large, physical area. And many WANs cover entire buildings, cities, states, or regions, thus the primary purpose of the WAN is to link together all the local area networks, of these other offices spread across the country. The Payroll program being used in this case study has been centered on having the proper application architecture that would be effective for the solution being deployed. It would take into consideration where each piece of equipment needs to be deployed and where its physical location should be sited and which is most effective for the organization. Thus an effective system would combine elements into an architecture, or design, that is flexible, cost-effective, technically sound, and able to support the information needs of the business. There would be a logical design of the payroll system into a physical structure, which would include hardware, software, network support, and processing methods. Therefore an Enterprise...
Words: 708 - Pages: 3
...Logical Design and Physical Design CMGT 555/ Systems Analysis and Development Throughout the whole process of system development, there are designs that take place before any coding or setup takes place. During this time, phrases like logical design and physical design get tossed around a lot, but what are they and what do they mean? In short, the logical design defines what must take place, not how it is accomplished. The logical design is like a set of blue prints, it describes the actual processes of entering, verifying, and storing data. In this paper we will explain when logical designs and physical designs are used, what design information a logical design and physical design contain and any similarities or differences. Figure 1. Example of Logical Model and Physical Model for an ERD Relationship Diagram (Compare Logical and Physical ERD, 2009) The direct definition of a logical design “is the Conceptual Blueprint of a software application, illustrating entities, relationships, rules, and processes (Thibeault, 2011)”. So what is the logical design is used for? The logical design contains all the business entries, what each entries attributes are, and relationships among entries. Now the logical design to some is misleading because they often confuse it with detailed technical design, even though the goals for these two are not similar at all. Now when do we use the logical design? That question is simpler to answer; it usually starts during the requirements...
Words: 845 - Pages: 4
...effective. As a member of an IT team, your overarching goal is to ensure that the IT systems ultimately do what the business needs them to do. In this course, you have learned about the key principles and practices underlying the analysis, design, implementation, and management of IT systems. In this final project, you will apply this knowledge by creating a systems proposal document. The project is divided into four milestones, which will be submitted at various points throughout the course to scaffold learning and ensure quality final submissions. These milestones will be submitted in Module Two, Module Four, Module Six, and Module Eight. The final submission will occur in Module Nine. In this assignment, you will demonstrate your mastery of the following course outcomes: Assess the relationship of systems analysis, design, implementation, and development processes as they relate to the management of information technology systems Communicate the paradigms, processes, and activities of systems development to diverse audiences Apply structure and object oriented analysis modeling techniques to analyze, design, and manage information technology systems Construct written and visual representations of the analysis, design, implementation, and management of information technology systems based on the systems development life cycle Prompt You will select your own case study and will apply the content provided, describing the business process to complete...
Words: 2901 - Pages: 12
...States has many changelings and most be done in a particular way. Thus having the right application architecture is important where the design is concerned, because the company has one large data center that each office connects to via a wide area network (WAN). Hence the appropriate architecture for this situation would have to consist of a WAN diagram to be used in management of this project, along with system documentation, and information technology architecture documents to provide a visual representation of the network. Wide area networks (WANs) cover a large, physical area. Many WANs cover entire buildings, cities, states, or regions. Thus the primary purpose of my WAN is to link together local area networks, of these other offices spread across the country Payroll Program * In this Payroll program the case study has been centered on having the proper application architecture that would be effective for the situation at hand. It would take into consideration where what equipment needs to be and where its physical location should be as to be effective for the organization. Thus an effective system would combine elements into an architecture, or design, that is flexible, cost-effective, technically sound, and able to support the information needs of the business. There would be a logical design of the payroll system into a physical structure, which would include hardware, software, network support, and processing methods. Therefore some type of Enterprise Resource...
Words: 715 - Pages: 3
...Act 359 final exams Chapter 9 Introduction to internal control systems Internal controls: the controls established to protect the assets of an organization. Internal control: describes the policies, plans, and procedures implemented by the management of an organization to protect its assets, to ensure accuracy and completeness of its financial information, and to meet its business objectives. Four objectives of internal control system: 1. Safeguard assets, 2. Check the accuracy and reliability of accounting data, 3. Promote operational efficiency, 4. Enforce prescribed managerial policies. Sarbanes Oxley Act of 2002 piece of legislation with respect to internal controls Section 404: reaffirms management is responsible for establishing and maintaining an adequate internal control structure. 1992 Coso report: established common definition of internal control for assessing control system, as well as determined how to improve controls. An internal control system should consist of the five components: 1. The control environment 2. Risk assessment 3. Control activities 4. Information and communication 5. Monitoring Control environment: foundation for all other internal control components and provides discipline and structure. Top management oversight, integrity, and ethical principles that guide the organization Risk assessment: identify organizational risks, analyze their potential in terms of costs and likelihood of occurrence, and implement only those...
Words: 1409 - Pages: 6
...The first step that the BCBA would take would be to gather baseline data on the student gathering information on the frequency of target behavior. This will help the BCBA know how many times the student is engaging in the target behavior prior to implementing the intervention. Once significant data is collected over several days or weeks, the next phase (B) would be introduced. Phase B would be the intervention phase. At this time the BCBA would implement an intervention with the goal of decreasing the frequency of behaviors. In this case the intervention for the student was using a token economy in order to decrease the target behaviors. Token economies are usually used to increase or decrease target behaviors. Prior to implementing a token...
Words: 1891 - Pages: 8
...Running Head: MANAGEMENT BRIEFING MEMORANDUM AND PROPOSAL FOR IMPLEMENTING 1st PROVIDERS CHOICE AC/PC® SOFTWARE SYSTEM Management Briefing Memorandum and Proposal For Implementing 1st Providers Choice AC/PC® Software System HCAD 610/9042 July 18, 2010 M E M O R A N D U M TO: President The Center for Physical Therapy, LLC FROM: Director of Operations DATE: July 18, 2010 Re: Proposal to Implement 1st Providers Choice AS/PC® Practice Management Software System Per our recent conversation concerning facilities operations and patient care, I would like to present to you a proposal for a new technological advance software system. This system would assist our physical therapy practice with improving efficiency, decreasing errors in treatment and processing of claims, and better delivery of appropriate physical therapy treatment to patients in our outpatient clinical setting. After completing extensive research, the software system that I recommend and propose for the management of your physical therapy practice is called 1st Providers Choice AS/PC® Practice Management Software System. The following proposal outlines the details of implementing this new software, including its necessity, the contents and features of the system, the benefits, the operational cost...
Words: 1717 - Pages: 7
...effort to properly protect our information assets and the future of our organization I have been instructed to reinforce our physical security in accordance with the National Institute of Standards and Technology (NIST). At present our physical security is at risk due to the full disclosure that our floor to celling glass wall provides to the environment, this design represents a huge liability to our organization. To protect our hardware, software and data against physical and intrusion threats, William Williams Corporation has authorize the expenditure of $7623 for the replacement of the glass wall by a solid reinforced concrete wall. I understand that this design not only symbolizes the company’s openness welcoming attitude towards our customers, its also part of our customs and traditions as stated in our core values. It is for this mere reason why I am seeking for you cooperation and approval, as it is pivotal to precede with this project. As stated before, our main goal is no other than to assure the protection of our organization. By implementing this preventative measurement we are assuring that our physical security is not compromised, it is instrumental to implement all security layers, the solution presented in this document is based on the hypothesis that physical security has been addressed. Please keep in mind that by neglecting physical security, no other security measures can be considered...
Words: 251 - Pages: 2
...Effects of Physical Restraints in Reducing Falls PICOT paper Larisa Myers Nova Southeastern University Effects of Physical Restraints in Reducing Falls Physical restraints are described as equipment attached to a patient’s body that limits movement. Physical restraints are commonly used in an adult medical facility to prevent patient’s falls or injuries, interference with clinical therapies, and protect patient from harming themselves or others (Kope et al., 2012). However, there is great debate whether or not physical restraints prevent falls. Evidence-based research can be used to expedite the recognition of adults at risks for physical restraints use and assists nurses to find alternative methods (Kope et al., 2012). Background Physical restraints are a common practice in industrialized countries (Kope et al., 2010). Older adults, who are confused, psychotic, and demented, have the greatest risk for being restrained in medical facilities (Kope et al., 2012). Physical restraints include hand mitts, waist belts, and wrist restraints to prevent body movements. The most common misconception among nurses is that restraints prevent falls or injuries (Kope et al., 2012). Data Bases and Key Terms The data base used to research effects of physical restraints in reducing injuries was CINAHL. The...
Words: 1215 - Pages: 5
...com HOME > LITERATURE > PERIODICALS > PHYSICAL ENVIRONMENT IN... Physical Environment in Counseling and Planning Only available on StudyMode Topic: Feeling, Office Pages(s): 7 (1656 words) Download(s): 99 Published: October 18, 2008 READ FULL DOCUMENT SAVE TO MY LIBRARY Please sign up to read full document. TEXT PREVIEW Physical Environment in Counseling and Planning I have recently read an interesting article about the impact of physical environment on the financial counseling and planning relationship and process. The publication raised my great interest because I have noticed before that our offices have several deficiencies that may have negative effects on the quality of our relationships with clients. The physical environment includes many aspects of our surrounding, including furniture and room design, color, accessories, lighting, sound, smell, thermal conditions and others. I have learned that all of these aspects can have bigger impact on relationships and the quality of our work that most people would expect. Therefore I took the initiative and researched the topic a little further to get a better understanding of the issue. Although there’s not a lot of a material available that refers strictly to financial planning, I was able to borrow ideas from other, more general studies. I believe that we can greatly improve our work place and clients’ satisfaction by implementing some changes in the physical environment in our office building. I came...
Words: 463 - Pages: 2
...Paradigm John Thompson Grand Canyon University: HLT 310V February 12, 2012 Healing Hospital: A Daring Paradigm Hospitals are constantly trying to improve. They are looking for ways to reduce costs, streamline treatments, more efficiently use staff, and improve patient satisfaction. In regard to its patients, a hospital’s role is to promote healing. “Although hospitals have long been thought of as places to cure disease, new ideas about what hospitals should be and how they should function are creating new challenges for hospital designers and caregivers” (Research Design Connections, 2004, ¶ 1). The healing hospital paradigm is a new concept that some hospitals are implementing to achieve a healing environment. This paper will: explore the reasoning behind this new model; discuss components of healing hospitals, including their connection to spirituality; and identify the challenges of implementing such a paradigm. Reasoning for Healing Hospital The healing hospital model both provides and reaps many benefits. The paradigm not only benefits the patient but also the healthcare team and the community in which it serves. It has been shown to result in “patient satisfaction, improved outcomes, caregiver satisfaction with increased chance for a positive sense of meaning in work and community satisfaction” (Zarren, n.d., p. 5). The institution that implements the healing hospital model receives remuneration with business success that follows superior healthcare...
Words: 1561 - Pages: 7
...Unit 1: Introduction to the Capstone Project Recommended Activities for This Unit Instructor Functions|Student Tasks| • Discuss the course structure layout. • Present an overview of the capstonecase study or Request for Proposal (RFP).|Discuss the capstone project or Request for Proposal (RFP) to identify the following: o Objectives and scope o Requirements and specifications o The resources, such as human, time, funds, space, and tools, required to deliver the product o Tasks o Deliverables o Milestones• Identify major milestones and individual tasks.| • Explain how to launch and configure Microsoft Office Project 2003.|Explore Microsoft Office Project 2003.| • Discuss project planning and management using Microsoft Office Project 2003 and relate the software to the capstone project. o Define the basic terminology of project management. o Explain the project management life cycle. o Explain project management knowledge areas.|Define project management terminology and apply the terminology to the capstone project.| • Organize project teams. o Define team member roles and responsibilities.|Select teams.• Define team member roles and responsibilities.• Elect peers to fill appropriate roles.| Network Development Capstone Project Unit 1 Instructor Functions|Student Tasks| • Identify the key components of the capstone project. o Discuss the key requirements for the successful completion of the project. See Appendix...
Words: 2321 - Pages: 10
