Free Essay

Marketing

In:

Submitted By snikies
Words 7632
Pages 31
Daisy Plan (4’ x 8’)

www.CleanCoops.com

“The Daisy” Chicken Coop Plan
Property of CleanCoops.com

Page 1 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

INTRODUCTION
When designing our Daisy Coop Plan we designed it with the following features and criteria in mind:

MAXIMIZING FLOOR SPACE / QUANTITY – This coop will house up to 12 laying hens comfortably. We have designed plenty of space for roosting, nesting and roaming.

CLEANLINESS / EASY TO MAINTAIN – We have designed it in such a way that it is easy to maintain, requiring only occasional cleaning that can be done VERY quickly and easily. All corners of the coop can be reached for cleaning without bending over or going inside.

ATTRACTIVENESS – As you can see from some of the included photos, we have designed and built a coop that actually adds to the aesthetics of your property! Your friends and neighbors will appreciate and adore your new coop while adding charm and character to your landscape.

QUALITY – This is a sturdy, solid, long lasting and quality design.

You want your work to last for years

to come. You don’t want to build something that you will have to constantly fix and repair. Our durable design will withstand the elements of your climate.

PROTECTION FROM PREDATORS – The entire coop was designed keeping in mind that there are critters out there that would like to get to your chickens. This design is virtually critter-proof!

COMFORTABLE CHICKENS – This design will keep the inside of the coop dry from the rain or snow. It is well ventilated to help keep odors to a minimum yet free from draft. Hens have private laying quarters and plenty of roosting space.

COMMON BUILDING MATERIALS – All of the materials used for building this coop are commonly and readily available at almost any hardware store. We have also been careful to use quality, yet low-cost, building materials.

ELEVATED FLOOR PLAN – Another feature we’ve included that helps keep predators out is the elevated floor plan. It also allows for easy cleaning, no more bending to the ground or squatting down to gather eggs or to clean the coop. It also provides shade for chickens when they are outside the coop, and can even be used to increase the size of the chicken run area. Plus it just looks nice!

All rights reserved. No part of this publication may be reproduced without written permission from the publisher. In addition, no part of this publication may be stored in a retrieval system or transmitted in any form or by any means – electronic, mechanical, photocopying, recording, or other – without written permission from the publisher. The information in this publication is true and complete to the best of our knowledge. All recommendations are made without guarantee on the part of the author, designer, publisher or distributor. The author, designer, publisher and distributor disclaim any liability in connection with the use of this information.

Page 2 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

GETTING STARTED
OVERALL SIZE
The main portion of the coop is 4’ deep, approximately 7½’ tall at the peak of the roof and 8’ wide (the width including the nesting boxes is approximately 11’ wide).

CONSTRUCTION METHODS
Our construction methods should be relatively easy to follow. We have tried to share as many details as possible and take out all the guess work. The entire coop can be built by somebody with basic carpentry skills. If you can measure, cut and nail a piece of wood you can build this coop. The design is sturdy, stable and will last you for many years to come. We have designed all of our coops so that they are easy to clean, properly designed to maximize use of the space and so that they actually look nice in your back yard.

TOOLS
The following tools will be hard to do without: chop saw circular saw hammer and nails screwdriver shovel framing square pencil tape measure ladder chalk box (chalk reel/string) tin snips These tools would certainly make some aspects of the building easier, faster and/or take less time, however you can complete the coop without them: nail guns (with a compressor and air hose) table saw reciprocating saw

Page 3 of 41

Daisy Plan (4’ x 8’)
MATERIALS LIST
You will need the following materials to build this coop:

www.CleanCoops.com

(4) 4x4’s in 6’ length – pressure treated for longevity and durability – you will probably have to buy this in an 8’ length and cut it down (45) – Standard 2x4’s in 8’ lengths (2) – Standard 2x4’s in 10’ lengths 9 – 4’x8’ sheets of approximately ½” plywood or OSB o Plywood or OSB will both work just fine. We recommend approximately 1/2” thickness. OSB has a lot of texture, if you plan on painting the exterior of your coop we would highly recommend using plywood, not OSB. If you plan on covering the exterior with stucco, siding or some other material then OSB will work well. (1) – 2x6 you will only need 3’ in length so buy the shortest length available (3 bundles) – shingles – typically 3 bundles of shingles will cover 100 sq. ft which will be more than enough, you only need about 80 sq ft. for the roof and the top of the nest boxes (1 roll) – roofing felt (you only need about 80 sq. ft) (30) – 1x2 furring strips (for a ‘board and batton’ exterior and trim) (4) – Hex Block 4 or Pier w/hot dip galvanized bracket (These are approximately 1’x1’x1’ blocks that form the foundation to set your 4 posts on. With the Hex Block, the posts rest in a 4”x4” square hole in the block. With the Pier w/bracket style, the block has a bracket that has two holes so you can drill a hole through the center of your posts and attach the posts to the bracket with a bolt) (2) – 1¼” x 4’ wooden dowels (4) – 2x2’s in 8’ lengths (5) – oil rubbed bronze sash lock (twist lock) (4) – black tee hinge 3.5” (6) – oil rubbed bronze hinge 3” (4) – 4”x12’ aluminum fascia (optional) (4) – 12”x12’ aluminum vented soffit (optional) (4) – 1½”x12’ aluminum drip edge (2) – 16”x6” (or 16”x8”) face on vent (2) – 2’x2’ windows (6) – H1 hurricane ties (to attach the roof trusses) (1 roll) – 3’x15’ hardware cloth net, black PVC (for window screens) 16d 3¼” nails for framing 8d ring shank nails 2½” Roofing nails for the shingles 3” wood screws (you will only be using 18-20 of these) Trim nails for the board and batton on the exterior Page 4 of 41

Daisy Plan (4’ x 8’)
SITE PREPARATION

www.CleanCoops.com

When determining the location to build your coop you could build almost anywhere. Ideally the building footprint (4’x8’) would be fairly flat. Although if you need to build on un-level ground you can modify the plan to adjust for the variance in the elevation of the ground by adjusting the lengths of each leg of the coop. Because the coop is built on legs, you will not need to disrupt much of the site at all. There are three ways in which you can prepare the site for the coop. Please select one of the following methods before you begin the project and before buying materials. We highly recommend option 1. 1. Cement block post holders. You can see in some of the photos that this is the option we used in building this coop. You can purchase cement block post holders at most hardware stores. Make sure that they will accommodate a 4”x4” post (actual measurement is 3½”x3½”). For this method, you need to mark four spots in a 4’x8’ rectangle. After locating these distances, dig a hole just deep enough to insert the cement blocks in, being sure to dig a wide enough hole that you can move the block slightly in any direction. After building the floor and attaching it to the posts, you can slide the posts into the cement blocks. This will provide a firm foundation for the coop to rest on and minimize settling. 2. Cement slab. You can build the coop on top of a cement slab. The slab will need to be no smaller than 4’x8’, anything larger would work just fine. 3. Cement post holes. With this method you would dig post holes in four spots in the ground, each hole being approximately a 1’x1’ square, forming a 4’x8’ rectangle. Please note that you will need longer lengths of 4”x4” posts than what is listed in the materials list, a 10’ post should work nicely in most circumstances. You need to cut the posts long enough so that it can rest at the bottom of the post hole and still stick up out of the ground at least 6’. Then you would fill the hole around the post with cement, making sure that the posts are level in every direction by checking it with a level. After the cement dries and the posts are secure, you can proceed to build the foundation and floor. It is extremely critical to the success of this project, if you choose to build using this method, that the distance between each post matches the framing layout of the floor plan

Page 5 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

CONSTRUCTION
FOUNDATION AND FLOOR
To begin with, the coop will be built on four supporting legs. These legs are made of 4x4 pressure treated posts. You can adjust the height of the posts depending how high you want the coop to sit off the ground or to compensate for uneven ground. As shown in these plans, each post is 6’ tall. To create the floor, you will need the following 15 cuts of lumber: 4 – 4x4 posts cut to 6’ 7 – 2x4’s cut to 3’-9” 2 – 2x4’s cut to 7’-5” 2 – 2x4’s cut to 3’-5” After making all of the cuts above, see the chart below for the layout of the floor of the coop. Nail or screw each of the joints together with at least two nails or screws to complete the framing of the floor. It is very important to secure the framing of the floor to the posts by nailing the floor into the posts. Measure 3’-10½“ down from the top of each post and mark this spot on the post using your framing square. Attach the floor framing to the post so that the bottom of the 2x4 frame is at this mark.

Page 6 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

The final step in finishing the floor is to put on the sheathing. Take one of your 4’x8’ sheets of plywood or OSB and place it on top of the floor frame you just completed. Make sure that all edges of the sheathing are flush with the outer edges of the floor. As shown in the sheathing diagram, you will need to cut out a small, 3½”x3½“ square out of each corner of the sheathing. Nail the sheathing to the floor approximately every 1’ around the outer edges and then nailing along each of the internal 2x4’s placing three or four nails spread out evenly from one end to the other.

Here is what it should look like in three dimensions so far…

Page 7 of 41

Daisy Plan (4’ x 8’)
FRAMING THE END WALLS

www.CleanCoops.com

For the end walls, you will make two identical walls as seen in the diagrams below. To begin with you will need a total of 11 pieces of lumber for each wall in the following lengths: 3 – 2x4’s cut to 3’-5” 1 – 2x4 cut to 4’ 2 – 2x4’s cut to 3’ 1 – 2x4 cut to 3’-2” 2 – 2x4’s cut to 1’-4” 1 – 2x4 cut to 2’-11” 1 – 2x6 cut to 1’-3” See the illustrations below for the layout of the end walls (one in purple, one in aqua – both are identical with the exception of the 2x6 support for the roosting box being on opposite sides). Please note: the two 2x4’s that are 1’-4” should be flush with the exterior of the framing, you will be screwing the hinges for the lid into these 2x4’s at a later stage. Also very important is that the 2x6 pieces are flush with the exterior and that the extra 2” width protrudes into the interior of the coop. Attach the 2x6 pieces to the 2x4 above them using six 3” wood screws for each 2x6. See the photo below for a view of the 2x6.

Page 8 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Nail or screw each of the 2x4’s together with at least two nails or screws to complete the framing of the end walls. Now, set the end walls into place between the corner posts. Secure the walls to the floor by nailing it into the 2x4’s beneath the sheathing. Also, nail the ends of each wall into the corner posts about every 1’. Make sure that the front edges of the posts, wall and floor are flush with each other. Finally, nail the 2x4 that fits over the top of each corner post down onto the post. Here is what it should look like in three dimensions so far…

Page 9 of 41

Daisy Plan (4’ x 8’)
FRAMING THE BACK WALL

www.CleanCoops.com

Now it’s time to frame the back wall. You will need a total of 12 pieces of lumber in the following lengths: 4 – 2x4’s cut to 3’-5” 2 – 2x4’s cut to 7’-5” 4 – 2x4’s cut to 4½” 2 – 2x4’s cut to 3’-5½” See the chart below for the layout of the back wall (red only).

Nail or screw each of the 2x4’s together with at least two nails or screws to complete the framing of the back wall. Now, position the wall in between the corner posts. Secure the wall to the floor by nailing it into the 2x4’s beneath the sheathing. Also, nail the end of each wall into the corner posts about every 1’. Make sure that the front edges of the posts, wall and floor are flush with each other and remain Page 10 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

flush with each other as you nail it all into place. Make sure also that this wall is placed on the side of the coop closest to the 2x6 pieces on the end walls. Here is what it should look like in three dimensions so far…

FRAMING THE FRONT WALL
The front wall and back wall have the same overall length and height but the internal framing is different. Now we need to frame the front wall. You will need a total of 15 pieces of lumber in the following lengths: 6 – 2x4’s cut to 3’-5” 2 – 2x4’s cut to 7’-5” 4 – 2x4’s cut to 2’-0½” 1 – 2x4 cut to 1’-6¾” 2 – 2x4’s cut to 1’-1” See the chart below for the layout of the front wall (green only).

Page 11 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Nail or screw each of the 2x4’s together with at least two nails or screws to complete the framing of the front wall. Now, set the front wall in place between the corner posts. Secure the wall to the floor by nailing it into the 2x4’s beneath the sheathing. Also, nail the end of each wall into the corner posts about every 1’. Make sure that the front edges of the posts, wall and floor are flush with each other and remain flush with each other as you nail it all into place. Here is what it should look like in three dimensions so far…

Page 12 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

SHEATHING THE FRONT AND BACK WALLS
Now it is time to add the sheathing to the front and back walls. Do not apply sheathing to the end walls yet, that will come later. The next step in completing the coop is to apply the sheathing so that you cover up all of the 2x4’s and enclose the walls. (Please note: If you need to use separate pieces of sheathing for the same surface, you need to make sure that the seam, where the two pieces of sheeting meet together to form the seam, always meet in the middle of a 2x4 so that the edges of both sheets can be nailed to the same 2x4.) Let’s start with the front wall first. It is highly recommended that you use the largest sheets you can, hold them in place and nail them to the 2x4’s. Take one of your 4’x8’ pieces of plywood or OSB (if using OSB make sure that the smooth side faces out) and nail it onto the front wall, making sure that the edges fit flush with the top, left and right edges of the wall. The bottom edge of the sheathing should also align evenly with the bottom edge of the 2x4 that creates the floor (if the sheathing hangs a little lower that is okay). Nail the sheathing to each stud approximately every 1’. Also, it is important to nail along the bottom of the sheathing into the 2x4’s that create the floor of the coop. You should also be sure to nail the sheathing to the corner posts. After nailing the sheathing to all of the studs you need to cut out the openings for the windows and chicken door. Do this using a circular saw set to the same depth (or slightly deeper) as the thickness of the sheathing. Cut along the edges of the 2x4’s that create the openings of the windows and doors, taking care to make straight, even cuts. If you have a reciprocating saw it will help you finish off the corners of each opening very cleanly. See the image below for the sheathing layout:

Page 13 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Here is what it should look like in three dimensions so far…

Sheathing the back wall is the next step. Because most of this wall is going to be an opening for the two large back doors, you can do the sheathing in one of two ways. You can use one large 4’x8’ piece of Page 14 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

sheathing (recommended) and then cut the holes for the openings of the door, or, rather than placing one 4’x8’ sheet over the entire wall you can cut several pieces of sheathing to cover only the necessary portions of the wall. See the image below for the sheathing layout:

Here is what it should look like in three dimensions so far…

Page 15 of 41

Daisy Plan (4’ x 8’)
FRAMING AND SHEATHING THE ROOF

www.CleanCoops.com

When framing the roof we cut 14 2x4’s to identical measurements as shown below on page 17. Each truss is made of two of these 2x4’s, and then fastened together using sheathing material (plywood or OSB) on the front and back of the 2x4’s, nailed together to build a strong secure roof and also to keep the inside of the coop with ample head room for your chickens. To keep the angles of each truss consistent, make a pattern on a piece of plywood as shown in the photos below using a framing square.

You can see in the images below the measurements of the pieces needed for each truss in the illustration on the right. The bottom piece is the gusset. The 2x4’s are both cut at 30* on each end. Place the 2x4’s on the plywood marked with the pattern and assemble 3 trusses, making sure to put the plywood gussets on both sides of the trusses. On the remaining four trusses, attach a gusset on one side only. This will give you a total of 7 trusses.

Page 16 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Page 17 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

In order to attach each truss to the top of the walls, you need to first nail a hurricane tie bracket onto the face of the front and back walls for the trusses to rest in. After attaching all brackets as spaced in the diagram below, place each truss in the brackets on both the front and back walls. Before nailing the truss to the hurricane tie be sure that the truss overhang is even on the front and back of the coop, then nail through the hurricane tie into the truss 2x4’s to secure the truss. Please note in the illustration below that the three middle trusses have gussets on both sides of the truss. The two outer trusses have only one gusset and it faces towards the interior of the coop. The hurricane ties will only be used on the three middle trusses. Also, you can add 2x4’s as shown below in yellow, in between each truss and on top of the front and back walls. This will seal off the exterior of the coop once the sheathing is applied and will keep undesirable critters from getting into the coop. If you plan on installing soffit then you don’t need to insert the yellow 2x4’s as the soffit will provide critter protection and leaving the yellow 2x4’s out will provide additional ventilation for the coop.

Page 18 of 41

Daisy Plan (4’ x 8’)
Here is what it should look like in three dimensions so far…

www.CleanCoops.com

The next step is to take one of the 10’ 2x4’s and nail or screw it to the face of each truss, making sure that the 10’ 2x4 has one foot hanging past each end of the end trusses. Do this on the front and back ends of each of the trusses as shown here:

Page 19 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

The next step in completing the roof is to cut and nail the sheathing to cover the entire roof as shown here:

Here is how it should look now:

Next, you take one of the end trusses, and using a circular saw, cut off all of the gusset that hangs over the edge of the 2x4’s. The gusset will now be only as wide as the 2x4 as shown here:

Page 20 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Place it in between the two ends of the 10’ 2x4’s, nailing it in at both ends as shown below. Nail through the plywood sheathing into the 2x4 truss to secure it in place. Repeat for the other end, making sure that the plywood gusset faces the inside of the coop like this:

SHEATHING THE END WALLS
Before building and attaching the nest boxes, we need to add the sheathing. Follow the images below to cut pieces of sheathing for the end walls. Each end will start with a full 4’x8’ piece of sheathing. Cut the two angles at the top of the sheathing so that it will fit up against the trusses. The left, right and bottom edges of these pieces of sheathing are the most critical when lining it up with the corner posts and with the corners of the front and back wall sheathing. As for the top edge of the sheathing, as long as you can nail it to the 2x4 trusses it is okay if it does not fit snugly against the sheathing that creates the roof. Nail the sheathing to each stud approximately every 1’. After attaching the sheathing, cut out the openings for the vent and the nest box using a circular saw with the blade set to the thickness of your sheathing. It is important to nail along the bottom of the sheathing into the 2x4’s that create the floor of the coop. You should also be sure to nail the sheathing to the corner posts. Page 21 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Here is the updated view:

Page 22 of 41

Daisy Plan (4’ x 8’)
FRAMING AND SHEATHING THE NEST BOXES

www.CleanCoops.com

To begin with you will need a total of 31 pieces of lumber for each nest box in the following lengths: 2 – 2x4’s cut to 1’-9” with one end trimmed at 30* and the other end at 60* as shown in the diagrams below 4 – 2x4’s cut 1’-1” 3 – 2x4’s cut to 3’-2” 4 – 2x4’s cut to 1’-7½” 2 – 2x4’s cut to 2’ with one end of each trimmed at a 30* angle 1 piece of sheathing cut to 1’-5½“ x 3’-2” for the floor of the box 4 – 2x2’s cut to 1’-1” 4 – 2x2’s cut to 4” 1 piece of sheathing cut to 1’-11” x 3’-5” for the lid 1 piece of sheathing cut to 1’-8” x 3’-2” for the outer edge of the box 2 pieces of sheathing cut to 1’-2” wide. Measure one edge to be 1’-4” tall and the other edge to be 2’ tall creating an angled top edge. 2 additional pieces of sheathing as explained in instructions below 1 piece of sheathing cut to 6½” x 3’-5” The nest boxes are the most complicated part of the entire project so follow the diagrams and instructions below carefully. Please read this entire section before beginning. First, take the 4 pieces you cut at 1’-7½” and place them into the bottom gap of the end wall. They should fit snugly and may need to be knocked into place using a hammer. Nail each of the two end pieces into the framing of the end wall, making sure that they are very secure. Then secure the middle 1’-7” 2x4’s by toe-nailing them into the 2x4 below and nailing through the 2x4 above it. Now take one of the 3’-2” 2x4’s and nail it into the end of each of the four 2x4’s you just secured to the end walls. This creates the floor of the nest box as shown below:

Page 23 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Next, take the piece of sheathing measuring 1’-5½” x 3’-2” and nail it to the nest box floor. You may have to trim two corners of the sheathing slightly to make it fit into place. You have now completed the floor of the nest box. Now you will build the small rectangular wall as shown in the image below. You will need to use four 1’1” 2x4’s and two 3’-2” 2x4’s. The 3’-2” pieces create the bottom and top of the wall. The 1’-1” pieces are the vertical pieces of the wall. After nailing this small wall together you can place the wall on the outer edge of the floor. Make sure the outer edge of the wall lines up flush with the outer edge of the floor and nail the wall into the 2x4’s of the floor.

The next step is to build the red and hot pink portion of the box as shown in the images below. The first step is to take the 2’ pieces of 2x4 with a 30* angle on one end and set them on the floor so that the 30* angle is facing up with the longer edge flush against the wall. Make sure the 2x4 aligns flush with the outer edge of the floor. Nail the 2x4 into the wall frame to secure it into place. It is important to note that the 2’ pieces with the 30* angles that fit vertically against the wall will partially cover the nest box opening in the wall (about 1¾”) and that is okay. The second part is to take the 2x4’s cut to 1’-9” with one end trimmed at 30* and the other end at 60* as shown in the diagrams below and nail one end to the 2’ pieces you just attached. The other end is nailed onto the top of the small wall on the outer edge of the nest box. This creates the top surface of the nest box for the lid to rest on. Now you can build the rest of the nest box as shown in the images below. The top left image is the profile view. The top right view is looking down into the nest boxes. The two bottom views are looking into the nest boxes from inside the coop. Keep in mind that in all three images below, the aqua color is the end wall framing. The yellow pieces are the 2x2’s you cut to 1’-1” in length, nailed to the floor. There is a ½“ gap between the 2x2’s to hold a piece of sheathing in place to divide the nest box into three compartments. You have already cut this piece of sheathing, it should be 1’-2” wide. The height should measure one edge to be 1’-4” tall and the other edge to be 2’ tall creating an angled top edge. It

Page 24 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

does not need to go all the way up to the lid, there will be a small space in between the lid and the top of the sheathing that divides the nest boxes. Now, take two pieces of 2x2 that were cut to 4” long. Place both of the 4” pieces vertically and nail them to the coop wall so that they line up with the 2x2’s you nailed to the floor of the nest box and repeat for the second set also. Be sure to leave a ½” gap between the two 4” pieces for the sheathing to slide down into. This will keep the sheathing from leaning over and make it more stable. Be sure the gap between the 4” pieces aligns well with the gap between the 1’-1” pieces on the floor so the sheathing can slide in properly. The sheathing can now be inserted so that it fits between the 4” pieces of 2x2 you attached to the wall and the 1’-1” pieces of 2x2 you attached to the floor.

Page 25 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Page 26 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Page 27 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

You will use these same dimensions for both ends of the coop. Now you need to attach the piece of sheathing that you cut to 6½” x 3’-5” and nail it to the interior of the wall to cover the 2x4’s at the bottom of the wall as seen in the lower portion of the image on the bottom of page 26. Here is our updated progress:

Once the nest box is built and attached to the coop you will apply sheathing to all three sides of the nest box. First, take the pieces of sheathing you cut to 1’-8” x 3’-2” for the outer edge of the box and nail it to the frame. Next, there were two pieces of sheathing in the list of cuts at the beginning of this section that did not specify the size. These two pieces of sheathing are for the two angled sides of the nest box. Cut two pieces of sheathing to 1’-5½” wide and at least 2’-8” tall. Hold the sheathing in place so that the right and left edges and the bottom edge align properly. Then, using a pencil, trace the angle onto the sheathing by following the angled 2x4 in red or pink in the above image. This will give you a line on each piece of sheathing to follow so that you have the perfect angle. Once that is complete, to create the lids you will need to use the pieces of sheathing you cut to 1’-11” x 3’-5” and then attach the hinges to one edge of the lid with the provided screws. Next, you place the lid on top of the nest box and then attach the hinges to the wall using the provided screws. Here is how our coop looks now:

Page 28 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

WINDOWS
Now it’s time to insert the windows into the front wall. When you purchase a 2’x2’ window the true measurement of the size of the window can vary. Most commonly it will be 23½“ x 23½“ or truly 2’x2’. For this reason we framed the window opening to be 2’-0½” x 2’-0½“. Measure the actual size of your window and see if you need to fill some gaps between the framing of the window and the 2x4’s. If so then you can cut pieces of leftover sheathing and nail them to the 2x4’s that create the window opening and this will fill in the gaps as necessary. Then you can place each window into the window holes and hold it in place while you nail around the perimeter of the windows to secure them to the wall. Be careful not to hit the frame of the windows when nailing it into place.

COMPLETING THE ROOF
To complete the roof, we first need to add the drip edge. Cut the aluminum drip edge to 10’ in length and nail onto the bottom edge of the roof on both sides of the coop, placing a nail about every 1’. Then, on both ends of the roof, you will cut pieces of the drip edge all along the length of the edge of the roof. After installing the drip edge along the entire perimeter of the roof, the next step is to roll out the roofing felt and cut two pieces to 10’ in length. Take one piece and place it on the sheathing on one side of the roof. Align the bottom edge of the roofing felt so that it overlaps part of the drip edge and is about ¼” to ½” from the corner of the aluminum drip edge. Align the right and left edges of the paper so that they are also about ¼” to ½” away from the outer edge of the aluminum drip edge. Trim the felt paper as necessary. Staple the roofing felt, just enough to hold it in place, making sure that the paper is Page 29 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

laying flat and not bunching up or wrinkling. At the peak of the roof, you will still have some tar paper remaining, wrap it over the peak and down onto the other side of the roof. Repeat on the other side of the roof with the second piece of tar paper so that it overlaps the first piece. Now it is time to put the shingles on. Install the shingles as per the manufacturer’s recommendations for the type of shingles that you have selected. In addition, you can repeat this same process for the lids of the nest boxes if you would like to have them shingled. The only difference in doing the nest box lids is that you will not want to have any aluminum drip edge so just skip that step. Simply cut the tar paper to fit the lid and then secure it into place with a few nails or staples. Then you can install the shingles on top of the tar paper.

DOORS
To begin with you will need a total of 3 pieces of sheathing material (OSB or plywood) for the three doors on the coop. There are two identical large doors on the back wall of the coop and one small chicken door on the front wall of the coop. Cut all of the following pieces out of sheathing material: 1 chicken door – 1’-4” x 1’-3” 2 back wall doors –3’-3” x 3’-8½ ” 1 – 2” x 1’-4” (mounting block) 4 – 2” x 5” (mounting blocks) 5 – 2” x 3” (mounting blocks) Now that you have cut out the doors you need to attach them to the coop. Let’s start with the small chicken door on the front of the coop. Take the 2” x 1’-4” mounting block and the chicken door and assemble them as shown in the photograph below so that the door covers the hole in the wall evenly on all sides. Nail the mounting block to the wall. Screw the hinges into the edge of the door and then screw the other side of the two hinges into the mounting block. Next we need to attach the sash lock (twist lock) at the top of the door. Attach one of your 2”x3” mounting blocks to the wall of the coop. Then screw the two pieces of the lock into place (see image below) making sure that they are spaced properly so that the lock will twist securely into place and hold the door tightly shut.

Page 30 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Now, to attach the two large back doors on the back wall of the coop you will use a similar technique as we used on the chicken door. Attach the 2”x5” mounting blocks to the back wall. Attach the hinges first to the door, then set the door in place, making sure that it overlaps the opening in the back wall evenly on all sides. Then screw the hinges into the mounting block. Repeat for all four hinges, two on each door. Finally, you will add the sash locks (twist locks), with the accompanying 2”x3”mounting blocks as shown in the photos below. Put one sash lock at the top of each door as shown here and one at the bottom of the door also.

Page 31 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

ROOSTING BOXES
To begin with you will need a total of 6 pieces of lumber for each roosting box in the following dimensions listed here: 1- 1¼” dowel cut to 3’-8¾” long 2 pieces of sheathing cut to 1’-3¾” x 6” with two of the corners cut off as shown in the left image below 2 – 2x2’s cut to 3’-6¾” 1 piece of sheathing cut to 3’-8¼” x 1’-3¾”

Nail each piece together as outlined. Drill a hole in each piece of sheathing 1¼“ in diameter as shown above so that you can attach the dowel to use as a handle. See also the four images below: Page 32 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

SUPPORTS FOR ROOSTING BOXES
You have already built two other supports from 2 pieces of 2x6 that you nailed to each of the end walls earlier. You will need 3 pieces of lumber to build one kneebrace support as shown in the image below. 1 – 2x4 cut to 1’-7¾” long and then trim each end at 45* as shown below 1 – 2x4 cut to 1’-4¾” 1 – 2x4 cut to 1’-3½”

Page 33 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Nail or screw each part of the knee brace support together and then, using 6 wood screws, secure the entire knee brace to the interior of the 2x4’s in the middle of the back wall as shown below. You have previously attached the two 2x6 roost box supports shown below (in light blue). Your roosting boxes and their supports are now ready to go!

COMPLETING THE EXTERIOR
There are many ways in which you could finish the exterior depending on the look you want, your budget and the materials that you like. With the fascia (2x4’s surrounding the outer edge of the roof) and the soffit area you can leave them as is, paint them or install aluminum soffit and/or fascia. It’s your coop so create the look that you like best. With the finished examples you see in this plan we created the ‘board and batton’ look. To create the board and batton look continue reading and use the images of the completed coop on the cover of these plans and below to guide you. To complete the exterior with the board and batton look, you will need to use the 1x2 furring strips to go around all the edges of each sheathed surface. This will also cover any gaps on the corners of the coop where two pieces of sheathing probably have small gaps between them. Then, using more 1x2 furring strips, you can create the board and batton look as shown in the images at the beginning and end of these plans. Be sure to space each furring strip at an even distance. Nine inches apart may be a good place to start but you can decide what distance you think looks best. Continue attaching furring strips until you have completed the coop. Keep in mind the following reminders when attaching the 1x2 furring strips:

Page 34 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Remember to cut the 1x2’s so that they don’t fit too close to the nesting boxes. You need to be able to raise the lid without the 1x2’s preventing the lid from opening up almost completely. See the image below for an example. Be sure to do the top, bottom, left and right edges of each major surface first. Then do the trim around the windows. After this is complete then you can take your measurements and attach the 1x2’s vertically and evenly spaced. In our example, we have shingled the roof and then used the same method to shingle the roof of the nesting boxes.

BUILDING THE RAMP
The construction of the ramp is quite simple. Simply take a piece of sheathing and cut it to 13”x48”. Then, cut 13” lengths of the 1x2 furring strips and attach them to the sheathing approximately every 4”. You can attach them with nails or with wood glue.

Page 35 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Page 36 of 41

Daisy Plan (4’ x 8’)
COMPLETING THE COOP

www.CleanCoops.com

You are now ready to put the finishing touches on the coop. Specifically, it’s time to paint. For best results, make sure you select a good quality exterior primer and paint. First, apply the primer per manufacturer’s recommendations and allow it to dry completely. Then using a roller or paint brush, apply the paint colors of your choice. Many paint manufacturers now have primer and paint all in one. This will save you time, money and effort! After the paint dries, you can install the black pvc hardware cloth (screen material) over both of the windows on the interior of the coop. You will need to cut two pieces of screen to measure 2’-3” x 2’-3” each. Then you can nail or staple them to the 2x4’s that form the frame of each window on the inside of the coop. This will allow you to open the windows from the outside of the coop and still keep predators out. After your paint dries, you can install the vents on each of the end walls. Simply cut a hole in the sheathing, making sure that the hole is smaller than the vent so you can nail or screw the edges of the vent onto the sheathing. That should put the finishing touches on the coop!

BUILDING THE CHICKEN RUN (OPTIONAL)
If you would like a run attached to your coop we have included the following images as one good example of how you could build your run. The run is designed to accommodate up to 12 hens and fits nicely with the profile of the coop. We did not include the materials needed to build this run in the original materials list at the beginning of the coop instructions. The run as shown in the following images is built entirely of 2x4’s. You need to get pressure treated 2x4’s for the 2x4’s that create the bottom of the wall that rest on the ground. The rest of the 2x4’s can be standard 2x4’s. The only additional materials you will need is chicken wire, 2 door hinges and a handle and/or lock to secure the door shut. You could use the same type of locks you used on the coop doors if you would like. Here is one of the side walls in pink. The red is part of the shorter end wall:

Page 37 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Here is the end wall in red:

Page 38 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

Here is another of the side walls in blue with the door in green and the end wall in red:

The yellow below is framed for the roof of the run and goes on top of the walls shown in the three images above:

Page 39 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

The following images show the completed run from a variety of viewpoints:

Page 40 of 41

Daisy Plan (4’ x 8’)

www.CleanCoops.com

GET GREAT INFORMATION, RESOURCES AND LEARN MORE ABOUT CHICKEN CARE BY VISITING OUR WEB SITE AT: HTTP://WWW.CLEANCOOPS.COM

(Updated 06/02/2011)

Page 41 of 41

Similar Documents

Premium Essay

Marketing

...ASB-1104 Introduction to Marketing Assignment 1 In view of the dynamic nature of the marketing environment, to what extent do you consider consumers to be, in practice, central to marketing activities? Name: ZHUOMING AN Student No: 500356688 Tutor: David James Introduction What is marketing? The answer is not changeless. There are some different definitions about marketing. The Chartered Institute of Marketing define that "Marketing is the management process responsible for identifying, anticipating and satisfying consumers' requirements profitably." (CIM). Taking a concern into this definition, it indicates that marketing begins before a product or service is developed. In additional, it also explain that marketing involves identifying an unsatisfied consumer need or want and determining if a profitable opportunity exists. Another definition is that “A social and managerial process by which individuals and groups obtain what they need and want through creating and exchanging products and value with others." (Kotler et al., 2005). The basic idea of this definition is that core to all marketing activities is customer satisfaction, which means marketing is an ongoing process as consumer demands and the environment is constantly changing. Products need to adapt as demands change. At the same time, marketing does not involve misleading, tricking or manipulation the customer. The Jobber also define the marketing is "The achievement of corporate goals through meeting...

Words: 1933 - Pages: 8

Premium Essay

Marketing

...*/introduction Critically evaluates the marketing planning process Discusses impediments to effective implementation of marketing plan Introduction The leading exponents of the marketing planning have been warned of the communications factors, operational, cultural and managerial in which frequently impede the effective implementation of the marketing planning programmers in the past two decades. (Cravens, 1998; Doyle, 1998; Greenley, 1982; Leeflang and de Mortanges, 1996; McDonald, 1992a, b; 1995; Piercy and Morgan, 1994; Jain, 1993; Simkin, 1996a, b; Verhage and Waarts, 1988). There have some specific guidance are offered in the recent years to assist marketing managers overcoming those internal organisational and in pre-empting forces (cf. Cravens, 1998; Dibb et al., 1996; Lings, 1999; Piercy, 1997; 1998; Simkin, 2000). Yet, the recent research has shows barriers to the implementation of programmes and marketing strategies. (Dibb and Simkin, 2001; Simkin, 2000). Another key barrier is indicating impeding the deployment of effective marketing practices used to be the lack in most marketing function or either in organisations. (cf. McDonald, 1992a, b; Piercy and Morgan, 1994). The research are shows this is a no longer to the case with the bulkiness businesses professing to have a marketing department undertaking not only promotion and customer research,but are relate to the Kotleresque textbook approach to marketing management (Dibb and Simkin, 1997; Piercy...

Words: 1580 - Pages: 7

Premium Essay

Marketing

...A high-level data model in business or for any functional area is an abstract model that documents and organizes the business data for communication between functional and technical people. It is used to show the data needed and created by business processes. A data model in software engineering is an abstract model that documents and organizes the business data for communication between team members and is used as a plan for developing applications, specifically how data are stored and accessed. An entity-relationship model (ERM) is an abstract conceptual data model (or semantic data model) used in software engineering to represent structured data. There are several notations used for ERMs. Methodology: 1. Use E-R model to get a high-level graphical view of essential components of enterprise and how they are related 2. Then convert E-R diagram to SQL DDL, or whatever database model you are using E-R Model is not SQL based. It's not limited to any particular DBMS. It is a conceptual and semantic model – captures meanings rather than an actual implementation The E-R Model: The enterprise is viewed as set of * Entities * Relationships among entities Symbols used in E-R Diagram * Entity – rectangle * Attribute – oval * Relationship – diamond * Link - line Ellipsis (plural ellipses; from the Ancient Greek: ἔλλειψις, élleipsis, "omission" or "falling short") is a series of dots that usually indicate an intentional omission of a word, sentence...

Words: 1759 - Pages: 8

Premium Essay

Marketing

...Defining Marketing Paper ShuMikki Stinson MKT/351 Thomas Collins August 26, 2013 Marketing is a tool that can help business owners to prosper with their product. Marketing can be defined as an instrument that is helpful to individuals to promote their goods in their unique way that other people items would not be an eye-catcher. It is vital to know that the key thing for every marketing tool that the individual uses will be used for the proper reasons. By the individual using marketing tools in the proper way, the individual will reach their marketing level in which they wish to be at. There are side effects when it comes to the marketing tools and the techniques which they do not work properly as it was intended too. There are numerous of definitions that relate to the marketing field. According to William D. Perreault, the author of Basic Marketing, the best definition of marketing is the performance of activities that seek to accomplish an organization’s objectives by anticipating customer or client needs and directing a flow of need satisfying goods and services from producer to customer or client. (William D. Perreault, 2011). Marketing is important because it can be a benefit for a business or a hardship. Respectable marketing methods can make a transformation between a concrete upsurges in sales to an impasse circumstances on a quality merchandise. Marketing can be as simple as having a general conversation, which is usually the case in the long run. Marketing is vital...

Words: 767 - Pages: 4

Premium Essay

Marketing

...Omar Rochell Marketing MKT/421 April 7, 2011 Nikki Jackson Introduction Marketing is exposed to someone every day, even when they do not seem realize it. Driving down the roads you see billboards everywhere and that is part of marketing. Logos people were on their shirts and signs in the middle or on the sign of football fields are all part of marketing. Even when a child is marketing themselves to their parents to borrow the car or go to a party they are marketing themselves to their parents in exchange for the car or the party. A set of activities that will benefit both parties’ objectives is my own personal definition of marketing. This paper will be defining marketing in different perspectives. Discussing the importance of marketing in a organizational success will also be discussed with examples included from different organizations. As an organization it is important to know what marketing is and how to establish success. What is Marketing “Marketing is defined as the activity, set of institutions, and processes for creating, communicating, delivering, and exchanging offerings that will have value for customers, clients, partners, and society at large.”(American Marketing Association, 2011) Marketing is a process that helps links the consumer, customer, and public to information that will help identify and market opportunities. Marketing research will generate, and evaluate different types of market actions, monitor marketing performance, and help improve...

Words: 1088 - Pages: 5

Premium Essay

Marketing

...focus inward on the organization’s needs instead of outward (the customer’s needs). • Product is aimed at everyone. • Firms want to profit through maximizing sales volume. • Promotion to achieve goals. 2. Describe some of the characteristics of a firm that would follow a marketing orientation. Marketing orientation is “a philosophy that assumes that a sale does not depend on an aggressive sales force but rather than on a customer’s decision to purchase a product; it is synonymous with the marketing concept.” • Unlike sales orientation, a firm would focus outward on the customers wants and needs. • The goal of a firm is to satisfy customers wants and needs and delivering superior value. • The target is specific groups of people. • Where sales orientation profits by sales volume, marketing orientation firms profit with good feedback from customers or customer satisfaction. • It’s more about marketing and less about selling (less persuasion). • Firms identify what customers want and have businesses give them what they want efficiently. 3. In what ways does McDonald's embody both a marketing and a societal marketing orientation? Do some internet research if necessary. McDonald’s embodies a marketing orientation...

Words: 1110 - Pages: 5

Premium Essay

Marketing

...customer-focused and heavily committed to marketing. These companies share a passion for understanding and satisfying customer needs in well-defined target markets. They motivate everyone in the organization to help build lasting customer relationships based on creating value. Marketing is just as important for non-profit-making organizations as it is for profit-making ones. It is very important to realize that at the heart of marketing is the customer. It is the management process responsible for identifying, anticipating and satisfying consumer requirements profitability. Background The term ‘‘marketing’’ is derived from the word ‘‘market’’, which refers to a group of sellers and buyers that cooperate to exchange goods and services. The modern concept of marketing evolved during and after the revolution in the 19th and 20th centuries. During that period, the proliferation of goods and services, increased worker specialization and technological advances in transportation, refrigeration and other factors that facilitate the transfer of goods over long distances resulted in the need for more advance market mechanisms and selling techniques. But it was not until the 1930s that companies began to place a greater emphasis on advertising and promoting their products and began striving to tailor their goods to specific consumer needs. By the 1950s, many larger companies were sporting entire marketing departments charged with devising and implementing marketing strategies that would complement...

Words: 2190 - Pages: 9

Premium Essay

Marketing

...MARKETING PLAN RESEARCH DEFINITION: A marketing plan is a business document written for the purpose of describing the current market position of a business and its marketing strategy for the period covered by the marketing plan. Marketing plans usually have a life of from one to five years. PURPOSE: The purpose of creating a marketing plan is to clearly show what steps will be undertaken to achieve the business' marketing objectives. CONTENT OF MARKETING: A marketing plan for a small business typically includes Small Business Administration Description of competitors, including the level of demand for the product or service and the strengths and weaknesses of competitors. 1. Description of the product or service, including special features 2. Marketing budget, including the advertising and promotional plan 3. Description of the business location, including advantages and disadvantages for marketing 4. Pricing strategy 5. Market Segmentation The main contents in marketing plan are: * Executive Summary Brief statement of goals and recommendations based on hard data. * Environmental Analysis Presents data on the market, product, competition, distribution, macro-environment. (Product fact book) S.P.I.N.S. Situation “Where am I”, Problem identification/Implications “What is happening”, Needs Assessment “Why is it happening”, Solutions “What can I do about it” Market Situation: Data on target market, size and growth for past years...

Words: 579 - Pages: 3

Premium Essay

Marketing

...Marketing MKT 421 Marketing According to “American Marketing Association” (2013), “Marketing is the activity, set of institutions, and processes for creating, communicating, delivering, and exchanging offerings that have value for customer, clients, partners, and society at large.” The American Marketing Society has grown to be the largest marketing associations in the world. The members work, teach, and study in the field of marketing across the globe. Another definition of marketing is according to “About.com Investors” (2013), “Marketing is an activity. Marketing activities and strategies result in making products available that satisfy customers while making profits for the companies that offer those products.” Organizations success lies in marketing and it is the heart of the success. The marketing introduces a product or service to potential customers. An organization can offer the best service or product in the industry but the potential customers would not know about it without marketing. Sales could crash and organizations may close without marketing. For a business to succeed the product or service that is provided needs to be known to the potential buyers. Getting the word out is important part of marketing in any organizational success. Product or service awareness is created by marketing strategies. If marketing is not used the potential customers will never be aware of the organizational offerings and the organization will not have the opportunity to succeed...

Words: 776 - Pages: 4

Premium Essay

Marketing

...chapter 1 Marketing’s Role in the Global Economy When You Finish This Chapter, You Should 1. Know what marketing is and why you should learn about it. 2. Understand the difference between micro-marketing and macro-marketing. 3. Know why and how macromarketing systems develop. 4. Understand why marketing is crucial to economic development and our global economy. 5. Know why marketing special— ists—including middlemen and — facilitators—develop. 6. Know the marketing functions and who performs them. 7. Understand the important new terms (shown in red). www.mhhe. When it’s time to roll out of bed in the morning, does your General Electric alarm wake you with a buzzer—or by playing your favorite radio station? Is the station playing rock, classical, or country music—or perhaps a Red Cross ad asking you to contribute blood? Will you slip into your Levi’s jeans, your shirt from L. L. Bean, and your Reeboks, or does the day call for your Brooks Brothers interviewing suit? Will breakfast be Lender’s Bagels with cream cheese or Kellogg’s Frosted Flakes—made with grain from America’s heartland—or some extra large eggs and Oscar Mayer bacon cooked in a Panasonic microwave oven imported from Japan? Will you drink decaffeinated Maxwell House coffee—grown in Colombia—or some Tang instant juice? Will you eat at home or is this a day to meet a friend at the Marriott-run cafeteria—where you’ll pay someone else to serve your breakfast? After breakfast, will you head off to school...

Words: 14069 - Pages: 57

Premium Essay

Marketing

...Abstract In the world of today with rude competition everywhere, customers’ expectations have become higher than ever. It is not the customers who come towards the products but it is the products which should make their way to the customers. And for this, only competitive businesses that are able to stimulate customers’ interests survive in the market. Therefore firms need to increase customers’ awareness about their products or services to be able to pull and encourage them to engage in purchase of their products. And as such, the promotional mix used by a company is really important for this task. The promotional mix in itself is very broad, consisting of various tools, like advertising, personal selling, direct marketing, public relation and sales promotion. To make the optimum use of these tools, marketers usually select them, depending on their budget and objectives, as well as the sector in which they operate (Kotler & Armstrong 1997). As such, research has been conducted on the use of promotional mix and research questions and objectives have been set. The methodology which will be used has been devised. We shall be doing a descriptive study through a survey questionnaire, in which there will be open as well as close ended questions and the questionnaire will be administered through personal interview that is direct, face-to-face. The sample size will be 100 persons and will all be customers of J Kalachand & Co Ltd. After the research, we will be...

Words: 4233 - Pages: 17

Premium Essay

Marketing

...Marketing is the process of communicating the value of a product or service to customers, for the purpose of selling that product or service. Marketing can be looked at as an organizational function and a set of processes for creating, delivering and communicating value to customers, and customer relationship management that also benefits the organization. Marketing is the science of choosing target markets through market analysis and market segmentation, as well as understanding consumer behavior and providing superior customer value. From a societal point of view, marketing is the link between a society’s material requirements and its economic patterns of response. Marketing satisfies these needs and wants through exchange processes and building long term relationships. Organizations may choose to operate a business under five competing concepts: the production concept, the product concept, the selling concept, the marketing concept, and the holistic marketing concept.[1] The four components of holistic marketing are relationship marketing, internal marketing, integrated marketing, and socially responsive marketing. The set of engagements necessary for successful marketing management includes capturing marketing insights, connecting with customers, building strong brands, shaping the market offerings, delivering and communicating value, creating long-term growth, and developing marketing strategies and plans.[2] Marketing may be defined in several ways, depending on...

Words: 270 - Pages: 2

Premium Essay

Marketing

...oriented philosophy is so important. The phrase market-oriented is used in marketing conversations as an adjective describing a company with a marketing orientation. Market orientation more describes the company's approach to doing business. Market-oriented defines the company itself. If a company is market-oriented, its board and executive leadership believe that the best way to succeed is to prioritize the marketplace above products. This usually goes over well with customers, but the company also must have adequate research and development to provide what the market wants. Hence, a market-oriented organization is one whose actions are consistent with the marketing concept. Difference Between Marketing Orientation & Market Oriented by Neil Kokemuller, Demand Media http://smallbusiness.chron.com/difference-between-marketing-orientation-market-oriented-14387.html Marketing is a management process and management support for marketing concept is very important element in success. If a company wants to be successful then it is market oriented. Marketing involves identifying the customer requirements and estimate the customer requirements in future. It requires planning which is very important process of marketing. To satisfy the needs the business should provide benefits – offering right marketing at right time at right place. Generally market based companies adopt strategic level marketing that defines the mission and long term objectives of the company. Market oriented...

Words: 716 - Pages: 3

Premium Essay

Marketing

...qwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmqwertyuiopasdfghjklzxcvbnmrtyuiopasdfghjklzxcvbnmqwer...

Words: 789 - Pages: 4

Premium Essay

Marketing

...Assessment: MKC1 Market Environmental Variables Reading: Contemporary Marketing: Chapter 3 Questions: 1. How would you categorize Generation X using the five segments of the marketing environment? A: Competitive Environment B: Political-legal environment C: Economic environment D: Technological environment E: Social-cultural environment 2. Joe and Ryan both have storefronts in the local mall. Joe sells candies and Ryan sells pretzels. Are Joe and Ryan in direct competition with each other? A: Yes B: No Consumer Behavior and Marketing Reading: Contemporary Marketing: Chapter 5 Questions: 1. Rachel and Sarah’s parents always purchased groceries from the local Aldi marketplace. What is this type of behavior an example of? A: Cultural influences B: Social Influences C: Personal factors 2. Maryanne purchases Maxwell House coffee every two weeks from the grocery. What is this type of behavior an example of? A: Routinized Problem Solving B: Limited problem solving C: Extended problem solving 3. Aaron does research on several local colleges before applying to his first three choices. This is an example of: A: High – involvement purchase decision B: Low – involvement purchase decision Marketing Plans Reading: Contemporary Marketing: Chapter 2 + Ch. 2 Appendix Web sites: http://www.jpec.org/handouts/jpec33.pdf http://www.netmba.com/marketing/process/ Questions: 1. Strategies are designed to meet objectives...

Words: 8933 - Pages: 36