...12th A-PCNDT 2006 – Asia-Pacific Conference on NDT, 5th – 10th Nov 2006, Auckland, New Zealand AUTOMATIC ULTRASONIC INSPECTION OF PIPELINE GIRTH WELDS WITH A CORROSIVE RESISTANT ALLOY (CRA) LAYER Jan van der Ent1 ; Niele Findlay2 ; Niels Portzgen3 ; Oddbjørn Nupen4 ; Geir Endal5; Olav Førli6 1 RTD Rotterdam The Netherlands 2 RTD Perth Australia 3 RTD Rotterdam The Netherlands 4 Technip Oslo Norway 5 Statoil Stavanger Norway 6 DNV Oslo Norway Abstract Development of the Norne Satellite Field comprises the connection of the two oil fields Stær and Svale to the Norne FPSO (see Figure). A unique solution, a common, single pipeline was selected by Statoil for transport of the multiphase well stream from the two oil reservoirs. The Norne field is located at 66° North and subjected to strict environmental requirements. Therefore a Carbon steel pipeline, built with a corrosive resistant alloy layer ( CRA ), had been selected for the resistance against the corrosive fluid without the use of chemicals. An implication of this construction method is that the pipeline girth welds have to be made with an austenitic welding consumable (typically Inconel), which is very difficult to inspect using ultrasonic testing method. Furthermore the reeling process used for the pipeline installation require severe weld flaw detection capabilities. An extensive AUT-CRA qualification program has been utilized by Technip and Statoil to confirm that the proposed CRA inspection method meet the quality standards...
Words: 6161 - Pages: 25
...new installation and performing of the commissioning, Issuing work orders and safety procedures to maintain and repair any pipeline, vessel, storage tanks, separators, dehydrators, manifolds, and all other oil/gas relative equipments based on the approved Codes. Design, any required fabrications and modifications. Updating all the related drawings, drafting and as built, (P&ID drawings, Piping drawings, and Mechanical drawings). Preparing all the required reports (daily, weekly, and annually reports). Summary of Qualifications Earned value management, supported by a solid grasp of the fundamental components of Project Controls including scope definition, cost estimating, change management, cost management, scheduling, project reporting, earned value analysis and risk management • Over ten years’ experience teaching and performing research at the university level • Over 15 years’ experience in capital projects management, overseeing a variety of oil and gas fields, from extraction to processing and shipping. • Used Natural gas treating solutions, including amine plants, Triethylene glycol dehydration units and mol sieve dehydration units. P&ID development • 15 years’ experience in progressively senior roles in the oil and gas industry. • Experience with corrosion engineering, welding and painting • Experienced in Gas Chromatography...
Words: 1290 - Pages: 6
...TECH) IN COMPUTER SCIENCE. MODIBBO ADAMA UNIVERSITY OF TECHNOLOGY YOLA, NIGER STATE OCTOBER 2012 DEDICATION This report is dedicated to the Almighty ALLAH and to my beloved mother and Mrs Aisha Tijjani and her husband also with the entire staffs and students of Surveying and Geo-informatics Federal University of Technology Minna. ACKNOWLEDGEMENT My profound gratitude goes to the Almighty God who saw me through this training program and thanks my parents and siblings who encouraged me when the road seemed too tough, for shelter and financial support. My appreciation goes to the staff of Pipeline and Products Marketing Company (PPMC) especially my supervisor and the staff of Pipeline Right Of Way (PROW) and to all NNPC staff and development control for their kind support and for the knowledge they impacted on me during the period of my training. My thanks goes to the SIWES and ITF coordinators especially the Federal University Of Technology Minna SIWES coordinator, my Head of Department (HOD), Course Adviser, and entire survey staff and students for all their contribution so far truly I am very grateful for their support and kind words of encouragement. I really appreciate all my friends for being there in both the good and challenging times and for the fun we all had....
Words: 9120 - Pages: 37
...II Week 6 Paper Assign PROJECT MANAGER REQUIREMENT FOR SUBCONTRACTOR SAFETY INTRODUCTION As a Construction Project Manager in any construction delivery method, there are many assessments and reviews for subcontractor’s submittals for safety, materials, equipment and performance. This paper will focus on the Project Management policy on cost-effective considerations for methods, safety and worker’s long term health hazards on the jobsite. For example, many mechanical contractors, depending on system design and specifications still must account for strict adherence to management policy for many jobsites. Factors considered, particularly for welding processes performed by a mechanical subcontractor alludes to several concerns. Such things as space, accessibility, ventilation, quantity and quality of welds, duration of toxic fumes and proximity of hazardous chemicals are a few. Also consideration for direct welder safety prevention equipment and long term effects are chief factors. Also in this paper I will attempt to present cost-effective innovations in on-jobsite methods and processes. But it is important to note from the article written by Alistair Mutch (1998) “The Impact of Information Technology on Traditional Occupations: The Case of Welding, welding is an example of a manual craft occupation that, whilst subject to some change, has not been as dramatically affected by information technology as some analyst suggest.” For this reason, changes in welding safety may...
Words: 1497 - Pages: 6
... Follow the questions on the subsequent pages. Writing format: Times new roman font, 12 pt. Single-spaced with justified margins. Just like on this page here. One space in between each paragraph. Email the final copy to r.angelo.borrelli@gmail.com. Points will be deducted for incorrect format. Citations: Please cite all sources you use. In the text of the paper, please use a superscript when you make a citation, like this.1 Then, in the REFERENCES section, list your sources in order. Length: ‘Sufficient.’ I am not going to give a set page limit. Be concise but show depth. Writing style: You will be writing in some form, whether technical writing or essays, and then when you get jobs in the real world. There is no time to start practicing like now. Grammar and spelling are part of the grade! Proof-read your paper several times! 1. Introduction [10] Please introduce your topic and explain why it is important to you. The topic I’m writing is about the tar sands oil spill in Mayflower, Arkansas. ExxonMobil, the company that runs the pipeline was in charge of the clean up. The pipeline carrying hundreds of thousands of gallons of Canadian crude oil and water from Illinois ruptured on March 29. According to the lawsuit, more than 19,000 barrels were spilled but ExxonMobil has said that between 3,500 and 5,000 barrels (at 42 gallons per barrel) of their tar sand oil flow into a residential and surrounding wetlands. The tar oil sands spill caused the...
Words: 3532 - Pages: 15
...Pipe Manufacture ENGL135 2/24/11 Milton Krivokuca The use of pipe for transmission of materials dates back to early civilizations. Archaeological records show tropical climates using pipe from hollowed out bamboo to move water from streams and rivers to huts inland. Bored out wood logs and other natural components carried material from one place to another. The first record of cast iron pipe being used dates back to 1562 in Langensalza, Germany (Cast Iron Pipe Research Association, 1952). The first record of steel pipe being used was in 1815 in London England by William Murdock. Murdock used musket barrels no longer in service and joined them together to transport coal gas for coal burning lamps throughout the city of London (Romanowski, 2011). Today, two types of steel pipe exist, welded pipe and seamless pipe, with several different ways to manufacture. Welded pipe has a welded seam along the entire length of the pipe. The seams are joined by curling, or rolling the pipe into a round shape and welding the two edges together. Many different applications exist for welded pipe. Transmission of liquids such as water, oil, and slurry are a few. Solid materials such as sand, rock, and wood chips are other applications which use welded pipe. Structural applications also exist for welded pipe. For example; when building bridges, it is not uncommon to specify welded pipe to be used as an encasement for concrete when building bridge abutments and piers. Pipe is capped and...
Words: 2301 - Pages: 10
...American Society of Civil Engineers (ASCE) Pipelines Conference 2005, Houston, TX Longitudinal Mechanics of Buried Thermoplastic Pipe: Analysis of PVC Pipes of Various Joint Types Shah Rahman1, Reynold K. Watkins2 ABSTRACT The analysis of longitudinal deformations compared to performance limits of deformation in buried pipes is referred to as longitudinal mechanics. Principal causes of longitudinal stress and strain within a pipe system include changes in temperature, internal pressure or vacuum, and beam bending. The widespread use of thermoplastic pipes, namely polyvinyl chloride (PVC), in municipal applications throughout North America in the past four decades has made it necessary to re-visit the topic of longitudinal mechanics for pipes that incorporate various types of joining systems. Typical North American PVC pipe joints are either bell-and-spigot gasket-joint or welded (heat-fused Fusible PVC and solvent-cement joints). Analysis herein focuses on the three main causes of longitudinal stresses and strains in bell-and-spigot gasket joints and welded joints, and includes discussion of theoretical concepts such as the Poisson effect and the Reissner effect. Topics which have raised issues in the field such as ponding due to sags in a PVC gravity line and the occasional cracking of PVC pipe bells during or after installation are also discussed. Current industry and manufacturer recommendations of various design parameters are provided in conjunction with the analysis...
Words: 6114 - Pages: 25
...Company History: Harnischfeger Industries, Inc. is a world leader in the manufacture, marketing, and servicing of mining equipment for both surface and underground operations. Until the year 2000, when it sold its Beloit Corporation subsidiary, Harnischfeger was also a major manufacturer of machinery for the pulp and paper industry. The company is represented in markets around the world, including Europe, Latin America, Australia, and Southeast Asia, and in South Africa, Canada, and the United States. Harnischfeger manufactures specialized equipment for underground mining of coal, as well as equipment for surface extraction of ores and minerals. A significant portion of the company's income comes from servicing mining equipment worldwide and providing spare parts. The company has a long history, punctuated in recent years by bankruptcy and near bankruptcy. After surviving a disastrous business downturn in the 1980s, the company made an impressive comeback, and then ended the 1990s in Chapter 11. Harnischfeger was forced to sell off its pulp and paper machinery manufacturing division to remain in business. 19th-Century Beginnings Like many century-old American enterprises, Harnischfeger traces its origins to an industrious immigrant with a dream. In 1884 Henry Harnischfeger was working at a sewing machine company in Milwaukee. Born in Germany, Harnischfeger had worked previously as a locksmith, a machinist, and a machine maker. He was a foreman in the sewing plant when the company...
Words: 3775 - Pages: 16
...Chesapeake Energy T E A M - C Members: Misti Smith Kyle Thompson Daniel Ogeto Harding University Spring 2013 TEAM C: The team assignments for our research paper are as follows: Week 2 - Outsourcing – Daniel Ogeto Week 3 - Overview of the Oil and Gas Industry – Daniel Ogeto Week 4 - Chesapeake Energy & its four affiliates - Kyle Thompson Week 5 - Chesapeake Company Operations - Misti Smith Week 6 - Chesapeake Company Future - Daniel Ogeto Abstract Chesapeake Energy is headquartered in Oklahoma City, Oklahoma. This independent company is involved in oil and natural gas exploration and production. The company’s operations, shares and debt; affiliations, outsourcing and future will be discussed in this paper. The oil and gas industry overview will also be covered. CONTENTS 1. Overview of the Oil and Gas Industry ------------------------Page 4 – 21 2. Chesapeake Company Operations ----------------------------Page 21-27 3. Chesapeake & Affiliates ----------------------------------------- Page 28-32 4. Outsourcing -------------------------------------------------------- Page 32-37 5. Chesapeake’s Future --------------------------------------------- Page 37-42 References ---------------------------------------------------------- Page 43-44 OVERVIEW OF THE OIL AND GAS INDUSTRY Companies in this industry develop and operate fields to extract crude oil and natural gas. Major players include Apache, Conoco Phillips, and...
Words: 8994 - Pages: 36
...04 05 Year at a glance. Contents. Rupees in ‘000 Net sales Cost of sales Gross profit Distribution and marketing expenses Administrative expenses Other operating expenses Other operating income Operating profit before reorganization/restructuring cost Reorganization/restructuring cost Operating profit after reorganization/restructuring cost Finance costs Profit before taxation Taxation Profit for the year Earnings per share – basic and diluted in Rupees Number of permanent employees at year end 2012 3,739,405 (2,785,235) 954,170 (231,066) (193,676) (33,811) 68,635 564,252 (204,572) 359,680 (44,266) 315,414 (39,125) 276,289 11.03 162 2011 3,044,800 (2,275,591) 769,209 (211,490) (171,376) (40,554) 58,850 404,639 – 404,639 (1,916) 402,723 (139,848) 262,875 10.50 262 06 07 08 09 10 12 15 16 17 18 20 22 23 26 30 35 36 40 42 44 83 84 86 About Linde Pakistan Company information Our vision Our mission Code of Ethics Business divisions, products and services Business Business locations Key facilities around Pakistan Ten-year financial review Vertical & horizontal analysis Key financial data Statement of value added Profile of Directors Directors‘ report Country Leadership Team (CLT) Corporate governance Statement of compliance with the Code of Corporate Governance Review report to the members on Statement of Compliance Financial Statements of the Company Shareholders‘ information Pattern of shareholdings Notice of Annual General Meeting Form of proxy Turnover...
Words: 28562 - Pages: 115
...An Analysis of Small Business Patents by Industry and Firm Size by Anthony Breitzman, Ph.D. and Diana Hicks, Ph.D. Haddonfield, NJ 08033 for Under contract no. SBAHQ-07-Q-0010 Release Date: November 2008 This report was developed under a contract with the Small Business Administration, Office of Advocacy, and contains information and analysis that was reviewed and edited by officials of the Office of Advocacy. However, the final conclusions of the report do not necessarily reflect the views of the Office of Advocacy. Office of Advocacy ww w.sba.gov/advo Small Business Research Summary Advocacy: the voice of small business in government No. 335 November 2008 An Analysis of Small Business Patents by Industry and Firm Size Anthony Breitzman and Diana Hicks., Haddonfield, NJ 08033 2008 [60] pages. Under contract no. SBAHQ-07-Q-0010 Background This study is the third in a series that examines small business patent activity. The authors created a database of 1,293 technology firms with 15 or more patents issued between 2002 and 2006. These firms are designated as innovative firms because of their high level of patent activity. Using this database, the authors analyze the relative strengths of small and large technology businesses, including information such as the industry and technology within which the firm patents and the importance of the patent. The results demonstrate that small businesses that innovate are indeed special and that the technology...
Words: 31696 - Pages: 127
...SUBMISSION OF FINAL RESEARCH REPORT University of Wisconsin-Stout The graduate School The accompanying research report was submitted to the Graduate School, University of Wisconsin-Stout, as partial completion of the requirements for the degree, M.S. in Risk Control. I understand that this report must be officially accepted by the Graduate School which will then forward it to the Library Learning Center, where it will be placed on microform or other electronic storage and made available as any other published document including placement on the Library Web Page. I attest that the research report is my original work, and that any copyrightable materials have been used with the permission of the original authors, and as such, it is automatically protected by the laws, rules, and regulations of the U.S. Copyright Office. TITLE OF REPORT IDENTIFICATION OF POSSIBLE HUMAN ERRORS THAT CAN RESULT IN FIRES/EXPLOSIONS DURING TANKERS' CARGO LOADING/UNLOADING OPERATIONS AT THE XYZ MARINE PETROLEUM TERMINAL SIGNATURE __________________________________DATE ________ PERMANENT ADDRESS 2721 Harvey Dr. Apartment #1. Menomonie, WI 54751, USA TELEPHONE # 715-235-4730 (This section to be completed by the graduate School) This final research report was submitted in partial fulfillment of the requirements for the above stated degree on this date, and has been accepted by the Graduate School and is now ready for transmittal to the Library Learning Center for placement on microform or other storage...
Words: 15534 - Pages: 63
...A Helping Hand for Europe: The Competitive Outlook for the EU Robotics Industry Authors: Simon Forge and Colin Blackman Editors: Marc Bogdanowicz and Paul Desruelle EUR 24600 EN - 2010 The The mission of the JRC-IPTS is to provide customer-driven support to the EU policymaking process by developing science-based responses to policy challenges that have both a socio-economic as well as a scientific/technological dimension. European Commission Joint Research Centre Institute for Prospective Technological Studies Contact information Address: Edificio Expo. c/ Inca Garcilaso, 3. E-41092 Seville (Spain) E-mail: jrc-ipts-secretariat@ec.europa.eu Tel.: +34 954488318 Fax: +34 954488300 http://ipts.jrc.ec.europa.eu http://www.jrc.ec.europa.eu Legal Notice Neither the European Commission nor any person acting on behalf of the Commission is responsible for the use which might be made of this publication. The report reflects the views of the authors and does not necessarily reflect those of the European Commission Europe Direct is a service to help you find answers to your questions about the European Union Freephone number (*): 00 800 6 7 8 9 10 11 (*) Certain mobile telephone operators do not allow access to 00 800 numbers or these calls may be billed. A great deal of additional information on the European Union is available on the Internet. It can be accessed through the Europa server http://europa.eu/ JRC 61539 EUR 24600 EN ISBN 978-92-79-17657-9 ISSN 1018-5593...
Words: 50200 - Pages: 201
...‘our’ relate to BP in Azerbaijan unless otherwise stated. When we cite ‘BP in Azerbaijan’ we refer to operations in Azerbaijan only. If we refer to ‘BP AGT’ we are including all our activities in Azerbaijan, Georgia and Turkey. Specific references to ‘BP’ and the ‘BP group’ mean BP p.l.c., its subsidiaries and affiliates. All dollar amounts are in US dollars. All gas volumes are indicated in standard cubic metres or standard cubic feet. The report is issued annually by BP Exploration (Caspian Sea) Limited in its capacities as operator and manager of the joint operating company for the Azeri-Chirag-Deepwater Gunashli field, as manager of The Baku-Tbilisi-Ceyhan Pipeline Company and by BP Exploration (Shah Deniz) Limited in its capacities as operator of the Shah Deniz field and as technical operator of The South Caucasus Pipeline Company. For this report each of these entities has provided information relevant to its project and statements applicable to its project. Front cover imagery The Sangachal terminal is one of the world’s largest integrated oil and gas processing terminals. It is a central hub for BP’s oil and gas operations in the Caspian region. Centre photo: Around one thousand people work continuously at the terminal to maintain safe and reliable operations of this strategic hub. Left photo: The Caspian Technician Training Centre located in the terminal area provides world-class training to the newly recruited technicians. These...
Words: 35186 - Pages: 141
.............................. 1 2.2 Employment ............................................................................................................................................ 2 2.3 Administration ....................................................................................................................................... 2 3.1 Changes Introduced in GATE 2013 that will continue to remain in force for GATE 2014 .......................................................................................................................................................... 3 4.1 Eligibility for GATE 2014 ................................................................................................................... 4 4.2 GATE Papers ............................................................................................................................................ 5 4.3 Zone-Wise List of Cities in which GATE 2014 will be Held ................................................... 6 4.4 Zone-Wise List of Cities for 3rd Choice .......................................................................................... 7 4.4 State-wise Examination Cities .......................................................................................................... 7 4.4 How to Apply .............................................................................................................................................
Words: 32784 - Pages: 132
