Free Essay

Samsung

In:

Submitted By KennedyPaper
Words 21963
Pages 88
This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.

Click a topic
Basic troubleshooting Quick reference Contents Basic functions Extended functions Shooting options Playback/Editing Settings

WB100/WB101
--

Appendixes Index

Health and safety information
Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warning—situations that could cause injury to yourself or others Do not disassemble or attempt to repair your camera. This may result in electric shock or damage to the camera. Do not use your camera near flammable or explosive gases and liquids. This may cause a fire or explosion. Do not insert flammable materials into the camera or store these materials near the camera. This may cause a fire or electric shock. Do not handle your camera with wet hands. This may result in electric shock. Prevent damage to subjects’ eyesight. Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. If you use the flash too close to your subject’s eyes, this can cause temporary or permanent eyesight damage. Keep your camera away from small children and pets. Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well. Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your camera’s internal components. Avoid covering the camera with blankets or clothes. The camera may overheat, which may distort the camera or cause a fire. If liquid or foreign objects enter your camera, immediately disconnect the power source and then contact a Samsung service center.

1

Health and safety information
Caution—situations that could cause damage to your camera or other equipment Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Use only authentic, manufacturer-recommended batteries. Do not damage or heat the battery. This may cause a fire or personal injuries. Use only Samsung-approved batteries, cables and accessories. • Using unauthorized batteries, cables or accessories can cause batteries to explode, damage your camera, or cause injury. • Samsung is not responsible for damage or injuries caused by unapproved batteries, cables or accessories. Use the battery only for its intended purpose. Misusing the battery may cause a fire or electric shock. Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin. Do not force the camera’s parts or apply pressure to the camera. This may cause your camera to malfunction. Exercise caution when you connect cables and install batteries and memory cards. If you force the connectors, improperly connect cables, or improperly install batteries and memory cards, you can damage ports, connectors, and accessories. Keep cards with magnetic strips away from the camera case. Information stored on the card may be damaged or erased. Never use a damaged battery or memory card. This may result in electric shock or camera malfunction or cause a fire. Check that the camera is operating properly before use. The manufacturer takes no responsibility for any loss of files or damage that may result from camera malfunction or improper use. You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

2

Outline of the User Manual
Copyright information • Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. • Mac is a registered trademark of the Apple Corporation. • HDMI, the HDMI logo and the term "High Definition Multimedia Interface" are trademarks or registered trademarks of HDMI Licensing LLC. • Trademarks and trade names used in this manual are the property of their respective owners.

Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.

10

Extended functions
Learn how to capture a photo and record a video by selecting a mode.

31

Shooting options
Learn how to set the options in Shooting mode.

48 68

Playback/Editing
• Camera specifications or contents of this manual may

be changed without prior notice due to upgrade of camera functions. • Use this camera responsibly and adhere to all laws and regulations concerning its use. • You are not allowed to reuse or distribute any part of this manual without prior permission.

Learn how to play back photos or videos, and edit photos or videos. Also, learn how to connect your camera to your computer, TV, HDTV, or 3D TV.

Settings
Refer to options to configure your camera’s settings.

91 98

Appendixes
Get information about error messages, specifications, and maintenance.

3

Indicators used in this manual
Shooting mode Smart Auto Program Scene DUAL IS Live Panorama Magic Plus Settings Movie Indicator

Icons used in this manual
Icon Function

Additional information Safety warnings and precautions [ ] ( ) → * Camera buttons. For example, [Shutter] represents the shutter button. Page number of related information The order of options or menus you must select to perform a step; for example: Select Face Detection → Normal (represents Select Face Detection, and then select Normal). Annotation

Shooting mode icons These icons appear in the text when a function is available in a mode. See the example below. Note: The or mode may not support functions for all scenes or modes. For example: the brightness and color for better image quality. Learn how to adjust
Adjusting the exposure manually (EV)
Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo.

Screen displays used in this manual
The camera has 52 MB internal memory. The on-screen displays appear based on the internal memory.

Adjusting brightness and color

• Available The Program, brighter as the exposure value increases. in photo will be DUAL IS, and Movie modes
EV : +1.0

3

Select a value to adjust the exposure.

Cancel

Set

 Darker (-)

 Neutral (0)

 Brighter (+)

4

Press [

] to save your settings.

1 2

• Once you adjust the exposure, the setting will be stored

In Shooting mode, press [ Select EV.

].

automatically. You may need to change the exposure value later to avoid overexposure or underexposure. AEB (Auto Exposure Bracket) option. The camera will capture 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. (p. 73)

• If you cannot decide on an appropriate exposure, select the

4

Expressions used in this manual
Pressing the shutter • Half-press [Shutter]: Press the shutter halfway down • Press [Shutter]: Press the shutter all the way down Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure by changing the shutter speed, aperture value, or ISO sensitivity. By altering the exposure, your photos will be darker or lighter.

Half-press [Shutter]

Press [Shutter]

 Normal exposure

 Overexposure (too bright)

Subject, background, and composition • Subject: The main object in a scene, such as a person, animal, or still life • Background: The objects around the subject • Composition: The combination of a subject and background Background Composition Subject

5

Basic troubleshooting
Learn to solve common problems by setting shooting options. The subject’s eyes appear red. Red eye occurs when the subject's eyes reflect light from the camera flash. Red-eye or Red-eye Fix. (p. 52) • If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 81)
• Set the flash option to

Photos have dust spots.

If dust particles are present in the air, you may capture them in photos when you use the flash.
• Turn off the flash or avoid capturing photos in a dusty place. • Set ISO sensitivity options. (p. 54)

Photos are blurred.

Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.
• Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 29) • Use the

mode. (p. 38)

Photos are blurred when shooting at night.

As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the camera steady long enough to capture a clear photo and may result in camera shake. • Select Night in mode. (p. 34) • Turn on the flash. (p. 52) • Set ISO sensitivity options. (p. 54) • Use a tripod to prevent your camera from shaking. When the light source is behind the subject or when there is a high contrast between light and dark areas, the subject may appear too dark. • Avoid shooting toward the sun. • Select Backlight in mode. (p. 34) • Set the flash option to Fill in. (p. 52) • Adjust the exposure. (p. 62) • Set the Auto Contrast Balance (ACB) option. (p. 63) • Set the metering option to Spot if a subject is in the center of the frame. (p. 63)

Subjects come out too dark because of backlighting.

6

Quick reference
Capturing photos of people
• mode > Beauty Shot  35 • mode > Picture in Picture  42 • Red-eye/Red-eye Fix (to prevent or correct red-eye)  52 • Face Detection  59 • Self-Portrait  60

Adjusting the exposure (brightness)
• ISO sensitivity (to adjust the sensitivity to light)  54 • EV (to adjust exposure)  62 • ACB (to compensate for subjects against bright backgrounds)  63 • Metering  63 • AEB (to capture 3 photos of the same scene with different exposures)  66 •

Applying effects to videos mode > Movie Filter  45

Reducing camera shake
• Optical Image Stabilization (OIS)  28 • Dual Image Stabilization (Dual IS)  28 • mode  38

Capturing photos at night or in the dark • mode > Night, Sunset, Dawn  34 • Flash options  52
• ISO sensitivity (to adjust the sensitivity to light)  54

Capturing photos of scenery
• • mode > Landscape  34 mode  39

Capturing action photos
• Continuous, Motion Capture  66 •

Capturing 3D photos mode > 3D Photo  41

• • • • • • • •

Capturing photos of text, insects, or flowers • mode > Text  34 • Macro  55

Applying effects to photos
• mode > Magic Frame  41 • mode > Split Shot  42 • mode > Photo Filter  44 • Image Adjust (to adjust Sharpness, Contrast, or Saturation)  67

Viewing files by category in Smart Album  70 Viewing files as thumbnails  71 Deleting all files on the memory  73 Viewing files as a slide show  75 Viewing files on a TV, HDTV, or 3D TV  82 Connecting your camera to a computer  85 Adjusting sound and volume  93 Adjusting the brightness of the display  94 • Changing the display language  95 • Setting the date and time  95 • Before contacting a service center  107

7

Contents
Basic functions ................................................................ 10
Unpacking .................................................................... 11 Camera layout .............................................................. 12 Attaching a strap ......................................................... 15 Attaching a lens cap .................................................... 15 Inserting the battery and memory card ........................ 16 Turning on your camera ............................................... 17 Turning on your camera ............................................... 17 Performing the initial setup .......................................... 18 Learning icons .............................................................. 20 Selecting options or menus ......................................... 21 Setting the display and sound ..................................... 23 Setting the display type ................................................ 23 Setting the sound ........................................................ 24 Capturing photos .......................................................... 25 Zooming ..................................................................... 26 Reducing camera shake .............................................. 28 Tips for getting a clearer photo .................................... 29 Using the DUAL IS mode ............................................. 38 Using the Live Panorama mode ................................... 39 Using the Magic Plus mode ......................................... 41 Using the 3D Photo mode ........................................... 41 Using the Magic Frame mode ..................................... 41 Using the Split Shot mode ........................................... 42 Using the Picture-in-Picture mode ................................. 42 Using the Photo Filter mode ........................................ 44 Using the Movie Filter mode ........................................ 45 Using the Movie mode ................................................. 46

Shooting options ............................................................. 48
Selecting a resolution and quality ................................ 49 Selecting a resolution ................................................... 49 Selecting an image quality ............................................ 50 Using the timer ............................................................. 51 Shooting in the dark ..................................................... 52 Preventing red-eye ...................................................... 52 Using the flash ............................................................ 52 Adjusting the ISO sensitivity .......................................... 54 Changing the camera’s focus ...................................... 55 Using macro ............................................................... 55 Using auto focus ......................................................... 55 Focusing on a selected area ........................................ 56 Using tracking auto focus ............................................. 57 Adjusting the focus area ............................................... 58

Extended functions ......................................................... 31
Using the Smart Auto mode ......................................... 32 Using the Scene mode ................................................. 34 Using the Beauty Shot mode ........................................ 35 Using the Frame Guide ................................................ 36 Using the Program mode ............................................. 37

8

Contents
Using Face Detection ................................................... 59 Detecting faces ........................................................... 59 Capturing a self portrait shot ......................................... 60 Capturing a smile shot ................................................. 60 Detecting eye blinking .................................................. 61 Adjusting brightness and color .................................... 62 Adjusting the exposure manually (EV) ............................ 62 Compensating for backlighting (ACB) ............................ 63 Changing the metering option ....................................... 63 Selecting a White Balance setting ................................. 64 Using burst modes ....................................................... 66 Adjusting images .......................................................... 67 Transferring files to your Windows computer .............. 85 Transferring files with Intelli-studio .................................. 86 Transferring files by connecting the camera as a removable disk ......................................................... 88 Disconnecting the camera (for Windows XP) .................. 89 Transferring files to your Mac computer ...................... 90

Settings ............................................................................ 91
Settings menu .............................................................. 92 Accessing the settings menu ....................................... 92 Sound ........................................................................ 93 Display ....................................................................... 93 Connectivity ................................................................ 94 General ...................................................................... 95

Playback/Editing .............................................................. 68
Viewing photos or videos in Playback mode ............... 69 Starting Playback mode ............................................... 69 Viewing photos ........................................................... 74 Playing a video ............................................................ 76 Editing a photo ............................................................. 78 Resizing photos .......................................................... 78 Rotating a photo .......................................................... 78 Applying Smart Filter effects ......................................... 79 Adjusting your photos .................................................. 80 Creating a print order (DPOF) ........................................ 81 Viewing files on a TV, HDTV, or 3D TV .......................... 82

Appendixes ...................................................................... 98
Error messages ............................................................ 99 Camera maintenance ................................................. 100 Cleaning your camera ................................................ 100 Using or storing the camera ....................................... 101 About memory cards ................................................. 102 About the battery ....................................................... 105 Before contacting a service center ............................ 107 Camera specifications ................................................ 110 Glossary ...................................................................... 114 FCC notice .................................................................. 119 Index ........................................................................... 120

9

Basic functions
Learn about your camera’s layout, icons, and basic functions for shooting.

Unpacking

………………………………… 11

Selecting options or menus ……………… 21 Setting the display and sound …………… 23
Setting the display type …………………… 23 Setting the sound ………………………… 24

Camera layout ……………………………… 12
Attaching a strap ………………………… 15 Attaching a lens cap ……………………… 15

Inserting the battery and memory card … 16 Turning on your camera …………………… 17
Turning on your camera ………………… 17 ……………… 18

Capturing photos

………………………… 25 Zooming ………………………………… 26 Reducing camera shake ………………… 28

Performing the initial setup

Tips for getting a clearer photo …………… 29

Learning icons ……………………………… 20

Unpacking
The following items are included in your product box. Optional accessories

Camera

USB cable Camera case A/V cable

AA Alkaline batteries

Strap HDMI cable Memory card

Lens cap/Lens cap strap

Quick Start Guide

Memory card/Memory card adapter

• The illustrations may differ slightly from the items shipped with your product.

• You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any problems caused by using unauthorized accessories.

Basic functions 11

Camera layout
Before you start, familiarize yourself with your camera’s parts and their functions. Mode dial (p. 14)

POWER button Recording button Shutter button AF-assist light/Timer lamp

Flash Eyelet for camera strap Flash pop-up button Speaker

Lens

HDMI port Accepts HDMI cable USB and A/V port Accepts USB cable and A/V cable

Basic functions 12

Camera layout

Microphone Zoom button • In Shooting mode: Zoom in or out • In Playback mode: Zoom in on part of a photo or view files as thumbnails, or adjust the volume

Status lamp • Blinking: When the camera is saving a photo or video, being read by a computer when the image is out of focus • Steady: When the camera is connecting to a computer or when the image is in focus

Buttons (p. 14)

Display

Tripod mount

Battery chamber cover Insert a memory card and battery

Basic functions 13

Camera layout
Mode dial
Icon Description

Buttons
Button Description

Smart Auto: Capture a photo with a scene mode selected automatically by the camera. Program: Capture a photo by setting options except the shutter speed and aperture value which the camera sets automatically. Scene: Capture a photo with options preset for a specific scene. DUAl IS: Capture a photo with options that reduce camera shake. live Panorama: Capture and combine a series of photos to create a panoramic image. Magic Plus: Capture a photo, record a video, or edit an image with various effects. Settings: Configure your camera’s settings. Movie: Customize settings to record a video.

Access options or menus. Move back. Basic functions Change the display option. Change the macro option. Change the flash option. Change the timer option. Other functions Move up Move down Move left Move right

Confirm the highlighted option or menu. Enter Playback mode. Delete files in Playback mode.

Basic functions 14

Camera layout

Attaching a strap
Attach a strap to carry your camera conveniently.

Attaching a lens cap
Attach a lens cap with a lens cap strap to protect the camera lens.

Basic functions 15

Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the camera.

Removing the battery and memory card

Push the card gently until it disengages from the camera, and then pull it out of the slot.
Memory card

Insert a memory card with the gold-colored contacts facing up.
Memory card Battery

Check the polarity (+/-) of the batteries before inserting them.
Battery

Using the memory card adapter

To use micro memory cards with this product, a PC, or a memory card reader, insert the card into an adapter.

You can use the internal memory for temporary storage if a memory card is not inserted.

Basic functions 16

Turning on your camera
Turning on your camera
Press [POWER] to turn your camera on or off. • The initial setup screen appears when you turn on the camera for the first time. (p. 18)

Turning on your camera in Playback mode
Press [ ]. The camera turns on and immediately accesses Playback mode.

If you turn on your camera by pressing and holding [ blinks, the camera does not emit any sounds.

] until the status lamp

Basic functions 17

Performing the initial setup
When you turn on your camera for the first time, the initial setup screen appears. Follow the steps below to configure the camera’s basic settings.

1

Verify that language is highlighted, and then press [ ] or [ ].
General Language Time Zone Date/Time Set Date Type Time Type Exit English London 01/01/... MM/D... 12 Hr Select

4

Press [ / [ ].
Time Zone

] to select a time zone, and then press
Home

[GMT+00:00] 2012/01/01 12:00 PM

London

Cancel

Set

2 3

Press [ [ ].

/

] to select a language, and then press

5

Press [ ] to select Date/Time Set, and then press [ ] or [ ].
Date/Time Set
Year Month Day Hr Min DST

Press [ ] to select Time Zone, and then press [ ] or [ ].

2012

01

01 12

00 PM

Cancel

Set

• The screen may differ depending on the language selected.

Basic functions 18

Performing the initial setup

6 7 8

Press [ /

] to select an item.

11 12

Press [ / ] to set the date, time, and daylightsaving time, and then press [ ]. Press [ ] to select Date Type, and then press [ ] or [ ].
Date Type YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY

Press [ press [ Press [

/ ].

] to select a time type, and then

] to finish the initial setup.

Back

Select

9
10

Press [ press [

/ ].

] to select a date type, and then

Press [ ] to select Time Type, and then press [ ] or [ ].

Basic functions 19

Learning icons
The icons the camera displays on the screen change according to the mode you select or the options you set.

1

2 Shooting options (right)
Icon Description

Icon

Description

Available recording time Exposure value Current date Current time Available number of photos Memory card inserted
• • •

Intelli zoom on

2

Photo resolution Video resolution Metering

3 1 Shooting options (left)
Icon Description

Frame rate Flash Zoom mute Optical Image Stabilization (OIS) Auto focus option Image adjustment (sharpness, contrast, and saturation) Timer

: Sufficient : Insufficient : Replace the batteries

Shooting mode ISO sensitivity White balance Face detection Face retouch Face tone Burst option Focus area

Auto focus frame Camera shake Zoom indicator Photo resolution when the Intelli zoom is on Zoom ratio (Intelli zoom)

3 Shooting information
Icon Description

Histogram (p. 23)

Aperture value Shutter speed

Basic functions 20

Selecting options or menus
To select an option or a menu, press [ ], and then press [ / / / ] or [ ].

1 2

In Shooting mode, press [ Select an option or a menu.

].
].

Going back to the previous menu

Press [

] to go back to the previous menu.
Half-press [Shutter] to return to Shooting mode.

• To move up or down, press [ ] or [ • To move left or right, press [ ] or [ ].

3

Press [

] to confirm the highlighted option or menu.

Basic functions 21

Selecting options or menus
For example, to select a White Balance option in Program mode:

3

Press [ / ] to select White Balance, and then press [ ] or [ ].
EV White Balance ISO Flash Focus Focus Area Exit Select

1

Rotate the mode dial to .

2

Press [
EV White Balance ISO Flash Focus Focus Area Exit

].

4

Press [ /

] to select a White Balance option.

White Balance : Daylight

Select

Back

Select

5

Press [

] to save your settings.

Basic functions 22

Setting the display and sound
Learn how to change the basic display information and sound settings.

Setting the display type
You can select a display type for the Shooting or Playback mode. Each type displays different shooting or playback information. See the table below.

About histograms
A histogram is a graph that illustrates how light is distributed in your photo. If the histogram has a high peak on the left, the photo is underexposed and will appear dark. A peak on the right of the graph means that the photo is overexposed and will appear washed out. The height of the peaks is related to color information. The more of a particular color, the taller the peak.

 Under-exposed

 Well-exposed

 Over-exposed

Press [
Mode

] repeatedly to change thes display type.
Display type • Hide all information about shooting options. • Show all information about shooting options. • Show a histogram. • Hide all information about the current file. • Show information about the current file

Shooting

Playback

(excluding the shooting settings and histogram). • Show all information about the current file.
Basic functions 23

Setting the display and sound
Setting the option display view
You can hide or show the option display appearing in some modes.

Setting the sound
Turn the sound your camera emits when you perform functions on or off.

Press [

] repeatedly.

• Hide the option display. • Show the option display.

1 2 3

Rotate the mode dial to

.

Select Sound → Beep Sound. Select an option.
Option Description

Off
Beauty Shot

The camera does not emit any sounds. The camera emits sounds.

On Option display

Panel Off

 For example, in Scene mode

Basic functions 24

Capturing photos
Learn how to capture photos easily and quickly in Smart Auto mode.

1

Rotate the mode dial to

.

3

Half-press [Shutter] to focus.
• A green frame means the subject is in focus. • A red frame means the subject is out of focus.

2

Align your subject in the frame.

4 5 6

Press [Shutter] to capture a photo. Press [ Press [ ] to view the captured photo. ] to return to Shooting mode.
• To delete the photo, press [ ], and then select Yes.

See page 29 for tips to get clearer photos.

Basic functions 25

Capturing photos

Zooming
You can capture close-up photos by adjusting the zoom.

Digital zoom
The Digital zoom is supported by default in Shooting mode. If you zoom in on a subject in Shooting mode and the zoom indicator is in the digital range, your camera is using the Digital zoom. By using both the 26X Optical zoom and 5X Digital zoom, you can zoom in up to 130 times. Optical range Zoom indicator Zoom ratio Digital range
• The Digital zoom is not available with the Tracking AF option. • If you capture a photo with the Digital zoom, the photo quality may be lower than normal.

Zoom out

Zoom in

• The farther you rotate the zoom button, the faster the camera zooms in or out.

• When you rotate the zoom button, the zoom ratio shown on the screen may change inconsistently.

Basic functions 26

Capturing photos
Intelli zoom
If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom. Photo resolution varies according to the zoom rate if you use the Intelli zoom. By using both the Optical zoom and Intelli zoom, you can zoom in up to 52 times. Photo resolution when the Intelli zoom is on Optical range Zoom indicator Intelli range
• Intelli zoom is not available with the Motion Capture, Selection AF option or Tracking AF option.

Setting Intelli zoom

1 2 3

In Shooting mode, press [ Select Intelli Zoom. Select an option.
Icon Description

].

Off: The Intelli zoom is deactivated. On: The Intelli zoom is activated.

• The Intelli zoom helps you capture a photo with less quality

deterioration than the Digital zoom. However, the photo quality may be lower than when you use the Optical zoom. • The Intelli zoom is available only when you set a 4:3 resolution ratio. If you set another resolution ratio with Intelli zoom on, the Intelli zoom will be turned off automatically.

Basic functions 27

Capturing photos

Reducing camera shake
In Shooting mode, you can set either the Optical Image Stabilizer (OIS) or the Dual Image Stabilizer (Dual IS) to reduce or eliminate picture blurriness from camera shake.

• The Image Stabilizer may not function properly when:
-

 Before correction

 After correction

you move your camera to follow a moving subject you use the Digital zoom there is too much camera shake the shutter speed is slow (for example, when you capture night scenes) - the battery is low - you capture a close-up shot • If you use the OIS function with a tripod, your images may be blurred by the vibration of the OIS sensor. Deactivate the OIS function when you use a tripod. • If the camera is hit or dropped, the display will be blurry. If this occurs, turn off the camera, and then turn it on again.

1 2 3

In Shooting mode, press [ Select OIS. Select an option.
Icon Description

].

Off: The Image Stabilizer is deactivated. On: The Optical Image Stabilizer (OIS) is activated. Dual IS: The Dual Image Stabilizer (Dual IS) is activated.

Basic functions 28

Tips for getting a clearer photo
Holding your camera correctly
Ensure nothing is blocking the lens, flash, or microphone.

Reducing camera shake
• Set the Optical Image Stabilization option to • Select the

reduce camera shake optically. (p. 28) mode or set the Dual IS option to reduce camera shake both optically and digitally. (p. 38, 28)

Half-pressing the shutter button

When

is displayed

Half-press [Shutter] and adjust the focus. The camera adjusts the focus and exposure automatically. Camera shake

The camera sets the aperture value and shutter speed automatically. Focus frame
• Press [Shutter] to capture the photo

if the focus frame appears in green. press [Shutter] again if the focus frame appears in red.

• Change the composition and half-

When you shoot in the dark, avoid setting the flash option to Slow Sync or Off. The aperture remains open longer and it may be harder to hold the camera steady long enough to capture a clear photo. • Use a tripod or set the flash option to Fill in. (p. 52) • Set ISO sensitivity options. (p. 54)

Basic functions 29

Preventing your subject from being out of focus
It may be difficult to get your subject in focus when: - there is little contrast between the subject and background (for example, when your subject is wearing clothing that is similar in color to the background) - the light source behind the subject is too bright - the subject is shiny or reflective - the subject includes horizontal patterns, such as blinds - the subject is not positioned in the center of the frame
• When you capture photos in low light

Turn on the flash. (p. 52)

• When subjects are moving rapidly

Use the Continuous or Motion Capture function. (p. 66)

Using the focus lock Half-press [Shutter] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [Shutter] to capture your photo.

Basic functions 30

Extended functions
Learn how to capture a photo and record a video by selecting a mode.

Using the Smart Auto mode ……………… 32 Using the Scene mode …………………… 34
Using the Beauty Shot mode …………… 35 Using the Frame Guide …………………… 36

Using the Magic Plus mode ……………… 41
Using the 3D Photo mode ……………… Using the Magic Frame mode …………… Using the Split Shot mode ……………… Using the Picture-in-Picture mode ……… Using the Photo Filter mode ……………… Using the Movie Filter mode ……………… 41 41 42 42 44 45

Using the Program mode ………………… 37 Using the DUAL IS mode ………………… 38 Using the Live Panorama mode ………… 39

Using the Movie mode …………………… 46

Using the Smart Auto mode
In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not familiar with the camera settings for various scenes.

1 2

Rotate the mode dial to

.

Icon

Description

Align your subject in the frame.
• The camera automatically selects a scene. An appropriate

Portraits with backlighting Portraits Close-up photos of objects Close-up photos of text Sunsets Blue skies Forested areas Close-up photos of colorful subjects

scene icon appears at the top left of the screen. The icons are listed below.

Icon

Description

Camera is stabilized or on a tripod (when shooting in the dark) Actively moving subjects

Landscapes Scenes with bright white backgrounds Landscapes at night Portraits at night Landscapes with backlighting

3 4

Half-press [Shutter] to focus. Press [Shutter] to capture the photo.

Extended functions 32

Using the Smart Auto mode

• If the camera does not recognize an appropriate scene mode, it uses the default settings for the mode.

• Even if it detects a face, the camera may not select a portrait mode depending on the subject's position or lighting.

• The camera may not select the correct scene depending on the

shooting conditions, such as camera shake, lighting, or distance to the subject. • Even if you use a tripod, the camera may not detect the mode if the subject is moving. • In mode, the camera consumes more battery power, because it changes settings often to select appropriate scenes.

Extended functions 33

Using the Scene mode
In Scene mode, you can capture a photo with options that are preset for a specific scene.

1 2

Rotate the mode dial to Select a scene.

.

Option landscape Close up Text

Description

Capture still-life scenes and landscapes. Capture detailed parts of a subject or small subjects, such as flowers or insects. Clearly capture text from printed or electronic documents. Capture scenes at sunset, with natural-looking reds and yellows. Capture scenes at sunrise. Capture backlit subjects. Capture colorful fireworks at night. Reduce underexposure of subjects caused by sunlight reflected from sand or snow.

Beauty Shot

Sunset Dawn

Panel off

Backlight Fireworks Description

Option Beauty Shot Frame Guide Night Portrait Children

Capture a portrait with options to hide facial imperfections. Help the other person capture a photo of you by showing part of the pre-composed scene. Capture scenes at night or in low lighting (using a tripod is recommended). Automatically detect and focus on human faces so that you can achieve clear, soft portraits. Make children appear more noticeable by capturing their clothes and the background vividly.

Beach & Snow

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.

Extended functions 34

Using the Scene mode

Using the Beauty Shot mode
In Beauty Shot mode, you can capture a portrait with options to hide facial imperfections.

1 2 3 4 5

Rotate the mode dial to Select Beauty Shot. Press [ ].

.

6 7 8

Press [

].

Select Face Retouch. Select an option.
• For example, increase the face retouch setting to hide more

imperfections.
Off Level 1 Level 2 Level 3

Face Retouch

Select Face Tone. Select an option.
• For example, increase the face tone setting to make skin

appear lighter.
Off Level 1 Level 2 Level 3

Face Tone

Back

Select

9
10
Select

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
When you use the Beauty Shot mode, the focus distance will be set to Auto Macro.

Back

Extended functions 35

Using the Scene mode

Using the Frame Guide
When you want another person to capture a photo of you, you can compose the scene with the frame guide feature. The frame guide helps the other person capture a photo of you by showing part of the pre-composed scene.

4 5

Ask another person to capture a photo.
• The person aligns the subject in the frame using the guides,

and then press [Shutter] to capture the photo.

To cancel the guides, press [

].

1 2 3

Rotate the mode dial to Select Frame Guide.

.

Align your subject in the frame, and then press [Shutter].
• Transparent guides appear on the left and right of the frame.

Cancel Frame: Back

Extended functions 36

Using the Program mode
In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically.

1 2

Rotate the mode dial to . Set the desired options.
• For a list of options, refer to "Shooting options". (p. 48)

3 4

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.

Extended functions 37

Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions.

 Before correction

 After correction

1 2 3

Rotate the mode dial to

.

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
• The camera will correct photos optically only when the light source is brighter than fluorescent light.

• If your subject is moving rapidly, the photo may be blurry. • Set the Optical Image Stabilization option or Dual IS option to reduce camera shake in different shooting modes. (p. 28)

Extended functions 38

Using the Live Panorama mode
In Live Panorama mode, you can capture a wide panoramic scene in a single photo. Capture and combine a series of photos to create a panoramic image.

4
 Shooting example

With [Shutter] pressed, slowly move the camera in the direction that will let it capture the rest of the panorama.
• When the viewfinder is aligned with the next scene, the

camera captures the next photo automatically.

1 2

Rotate the mode dial to

.

Align your subject in the frame, and then half-press [Shutter] to focus.
• Align the camera with the far left or the far right, or very top or

bottom, of the scene you want to capture.

3

Press and hold [Shutter] to start shooting.

5

When you are finished, release [Shutter].
• When you have captured all the necessary shots, the camera

combines them into one panoramic photo.

Extended functions 39

Using the Live Panorama mode

• For best results when capturing panoramic photos, avoid the

following: - moving the camera too quickly or too slowly - moving the camera too little to capture the next image - moving the camera at irregular speeds - shaking the camera - changing the camera direction while capturing a photo - shooting in dark places - capturing moving subjects nearby - shooting conditions where the brightness or color of light is changing • Selecting Live Panorama mode will disable the digital and optical zoom functions. If you select Live Panorama mode while the lens is zoomed in, the camera automatically zooms out to the default position. • In Live Panorama mode, some shooting options are not available. • The camera may stop shooting due to the shooting composition or movement within the scene. • In Live Panorama mode, your camera may not capture the last scene in its entirety if you stop moving the camera exactly where you want the scene to end. To capture the entire scene, move your camera slightly beyond the point where you want the scene to end.

Extended functions 40

Using the Magic Plus mode
In the Magic Plus mode, you can capture a photo or record a video with various effects.

Using the 3D Photo mode
You can take 3D pictures in 3D Photo mode that can be viewed on a 3D TV or 3D monitor.

Using the Magic Frame mode
In Magic Frame mode, you can apply various frame effects to your photos. The shape and the feel of the photos will change according to the frame you select.

1 2 3 4

Rotate the mode dial to Select .

.

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
• The camera captures 2 photos in both JPEG and MPO file

1 2 3

Rotate the mode dial to Select .

.

Select an option.

formats.

• When using the 3D Photo mode, limited shooting options are

Mural

available. • An MPO file for 3D effects can only be displayed on devices supporting the MPO format (3D TV and 3D monitor), while the camera can display only regular JPEG files. • If you want to see the 3D effect of MPO files on a 3D TV or 3D monitor, you need to wear 3D glasses provided by the manufacturer. • The resolution is fixed at in the 3D Photo mode.

Panel off

4 5

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture the photo.
In Magic Frame mode, the resolution is automatically set to .

Extended functions 41

Using the Magic Plus mode

Using the Split Shot mode
In Split Shot mode, you can capture several photos and arrange them with preset layouts.

4 5

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture a photo.
• Repeat steps 4 and 5 to capture the rest of the photos. • To recapture a photo, press [ ]. • In Split Shot mode, the resolution is automatically set to or smaller. • In Split Shot mode, the available zoom range may be less than in other shooting modes.

1 2 3

Rotate the mode dial to Select .

.

Select a split style.
• To adjust the sharpness of the dividing line, press [

], and then select line Blur → a desired value. • To apply a Smart Filter effect to part of the shot, press [ ], and then select Smart Filter → a desired option. You can apply different Smart Filter effects to each part of the shot.

Using the Picture-in-Picture mode
In Picture-in-Picture mode, you can capture or select a full-sized background photo, and then insert a smaller photo or video into the foreground.

Panel off

1 2

Rotate the mode dial to Select
[

.

.
], and then select Movie Size → a desired video size.

• To set the final video size when inserting a video, press

Extended functions 42

Using the Magic Plus mode

3

Half-press [Shutter] to focus, and then press [Shutter] to capture a background photo.
• To select a background photo from your saved photos, press

8

Half-press [Shutter] to focus, and then press [Shutter] to capture and insert a photo.
• The insertion window appears larger when you half-press

[ ], and then select Open Image → a desired photo. You cannot select a video file or a photo captured in Live Panorama mode.

4

Press [ image.

] to set the photo as the background
].

[Shutter], so that you can determine whether or not the subject is in focus. • To record a video, press (Video recording). To stop recording and insert the video, press (Video recording) again.
• When capturing background photos, the resolution is automatically set to and all photos captured are saved.

• To recapture a background photo, press [

• The final Picture-in-picture photos or videos are saved as one

Retake

Move Frame

5 6 7

Press [ ], and then press [ change the insertion point. Press [ ], and then press [ change the insertion size. Press [ ] to save the setting.

/ /

/ / / /

] to ] to

combined file and the inserted photos or videos are not saved separately. • When inserting an image, the resolution for the combined file is automatically set to . • When inserting a video, the resolution for the combined file is automatically set to or smaller. • When capturing a background photo, a vertical photo captured in the vertical position is displayed horizontally without auto rotate. • The maximum size of the insertion window is 1/4 of the screen, and the aspect ratio stays the same when changing the size. • The maximum length of video that can be inserted is 20 minutes. • In Picture-in-Picture mode, the available zoom range may be less than in other shooting modes. • In Picture-in-Picture mode, you cannot set the Voice options. • When you select a background photo from your saved photos, black bars may appear at the edges of the image, depending on the aspect ratio.

Extended functions 43

Using the Magic Plus mode

Using the Photo Filter mode
Apply various filter effects to your photos to create unique images.

Option Miniature Vignetting Cross Filter

Description

Apply a tilt-shift effect to make the subject appear in miniature. Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Add lines that radiate outward from bright objects to imitate the visual effect of a cross filter. Blacken the edges of the frame and distort objects to imitate the visual effect of a fisheye lens. Apply a vintage film effect. Apply a black and white effect. Apply a sepia tone effect.

Miniature

Vignetting
Fish-eye Old Film Classic Retro

Fish-eye

Classic

1 2 3

Rotate the mode dial to Select .

.

4 5

Align your subject in the frame, and then half-press [Shutter] to focus. Press [Shutter] to capture a photo.
Depending on the option you select, the resolution may change to smaller automatically. or

Select an effect.

Extended functions 44

Using the Magic Plus mode

Using the Movie Filter mode
Apply various filter effects to your videos to create unique images.

1 2 3

Depending on the option you select, the recording speed may change to and the recording resolution may change to or smaller automatically.

Rotate the mode dial to Select .

.

Select an effect.
Option Vignetting Fish-eye Classic Retro Palette Effect 1 Description

Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Distort close objects to imitate the visual effect of a fisheye lens. Apply a black and white effect. Apply a sepia tone effect. Create a vivid look with sharp contrast and strong color.

Palette Effect 2 Make scenes clean and clear. Palette Effect 3 Apply a soft brown tone. Palette Effect 4 Create a cold and monotone effect.

4 5

Press

(Video recording) to start recording.

Press (Video recording) again to stop recording.

Extended functions 45

Using the Movie mode
In Movie mode, you can customize settings to record HD videos of up to 20 minutes in length. The camera saves recorded videos as MP4 (H.264) files.
• H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standards organizations ISO-IEC and ITU-T. • Some memory cards may not support high definition recording. If your card does not, set a lower resolution. • Memory cards with slow writing speeds will not support high-resolution videos. To record high-resolution videos, use memory cards with faster write speeds.

1 2 3

Rotate the mode dial to Press [ ].

.

6 7 8

Set desired options.
• For a list of options, refer to "Shooting options". (p. 48)

Select Frame Rate → a frame rate (the number of frames per second).
• As the frame rate increases, action appears more natural, but

Press Press

(Video recording) to start recording. (Video recording) again to stop recording.
.

the file size also increases.

4 5

You can start recording a video in some modes by pressing (Video recording) without having to rotate the mode dial to

Press [

].

Select Voice → a sound option.
Option Description

Zoom Mute: The camera stops recording sound temporarily when you use the zoom. Off: Record a video without sound. On: Record a video with sound.

Extended functions 46

Using the Movie mode
Pause recording
The camera allows you to temporarily pause a video while recording. With this function, you can record separate scenes as a single video.

Pause

• Press [ • Press [

] to pause while recording. ] to resume.

Extended functions 47

Shooting options
Learn how to set the options in Shooting mode.

Selecting a resolution and quality ………… 49
Selecting a resolution …………………… 49 Selecting an image quality ………………… 50

Using Face Detection ……………………… 59
Detecting faces …………………………… Capturing a self portrait shot ……………… Capturing a smile shot …………………… Detecting eye blinking …………………… Adjusting the exposure manually (EV) …… Compensating for backlighting (ACB) …… Changing the metering option …………… Selecting a White Balance setting ………… 59 60 60 61 62 63 63 64

Using the timer ……………………………… 51 Shooting in the dark ……………………… 52
Preventing red-eye ……………………… 52 Using the flash …………………………… 52 Adjusting the ISO sensitivity ……………… 54

Adjusting brightness and color …………… 62

Changing the camera’s focus …………… 55
Using macro ……………………………… Using auto focus ………………………… Focusing on a selected area ……………… Using tracking auto focus ………………… Adjusting the focus area ………………… 55 55 56 57 58

Using burst modes ………………………… 66 Adjusting images …………………………… 67

Selecting a resolution and quality
Learn how to change the image resolution and quality settings.

Selecting a resolution
As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase.

Setting the video resolution

Setting the photo resolution

1 2 3

In Shooting mode, press [ Select Movie Size. Select an option.
Icon Description

].

1 2 3

In Shooting mode, press [ Select Photo Size. Select an option.
Icon Description

].

1280 X 720: HD files to play back on an HDTV. 640 X 480: SD files to play back on an analog TV. 320 X 240: Post on a web page.

4608 X 3456: Print on A1 paper. 4320 X 3240: Print on A1 paper. 4320 X 2880: Print on A1 paper in wide ratio (3:2). 3648 X 2736: Print on A2 paper. 4320 X 2432: Print on A2 paper in panorama ratio (16:9) or play back on an HDTV. 2832 X 2832: Print on A3 paper in 1:1 ratio. 2592 X 1944: Print on A4 paper. 1984 X 1488: Print on A5 paper. 1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play back on an HDTV. 1024 X 768: Attach to an email.
Shooting options 49

Selecting a resolution and quality

Selecting an image quality
Set the photo and video quality settings. Higher image quality settings will result in larger file sizes.

Setting the video quality
The camera compresses and saves the videos you record in MP4 (H.264) format.

Setting the photo quality
The camera compresses and saves the photos you capture in the JPEG format.

1 2 3

In Shooting mode, press [ Select Quality. Select an option.
Icon Description

].

1 2 3

In Shooting mode, press [ Select Frame Rate. Select an option.
Icon Description

].

30 FPS: Record 30 frames per second. 15 FPS: Record 15 frames per second.

Super Fine: Capture photos in super high quality. Fine: Capture photos in high quality. Normal: Capture photos in normal quality.

Shooting options 50

Using the timer
Learn how to set the timer to delay shooting.

1

In Shooting mode, press [

].

3

Press [Shutter] to start the timer.
• The AF-assist light/timer lamp blinks. The camera will

automatically capture a photo after the specified time has elapsed.
• Press [Shutter] or [ ] to cancel the timer. • Depending on the Face Detection options you selected, the timer function may not be available. [

Timer Off 10 Sec 2 Sec Double
Back Select

• In some modes, you can also set the timer option by pressing
], and then selecting Timer.

2

Select an option.
Icon Description

Off: The timer is not active. 10 Sec: Capture a photo after a 10-second delay. 2 Sec: Capture a photo after a 2-second delay. Double: Capture one photo after a 10-second delay and another photo after a 2-second delay.
The options may differ depending on the shooting mode.

Shooting options 51

Shooting in the dark
Learn how to capture photos at night or in low light conditions.

Preventing red-eye
If the flash fires when you capture a photo of a person in the dark, a red glow may appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to flash options in “Using the flash.”

2

In Shooting mode, press [ ].

Flash Off Auto Red-eye Fill in

 Before correction

 After correction
Back

Slow Sync Red-eye Fix
Select

Using the flash
Use the flash when you capture photos in the dark or when you need more light in your photos.

1

Press [ ] to pop the flash up when it is need.

Shooting options 52

Shooting in the dark

3

Select an option.
Icon Description

Icon

Description

Off: • The flash will not fire. • The camera will display the shake warning you are shooting in low light.

when

Auto: The flash will fire automatically when the subject or background is dark. Red-eye: • The flash will fire twice when the subject or background is dark to reduce the red-eye effect. • There is an interval between the 2 bursts of the flash. Do not move until the flash fires a second time. Fill in: • The flash always fires. • The camera automatically adjusts light intensity. Slow Sync: • The flash fires and the shutter stays open longer. • This option is recommended when you want to capture more ambient light to reveal more details in the background. • Use a tripod to prevent your photos from blurring. • The camera will display the shake warning when you are shooting in low light.

Red-eye Fix: • The flash fires twice when the subject or background is dark. The camera corrects red-eyes through its advanced software analysis. • There is an interval between the 2 bursts of the flash. Do not move until the flash fires a second time.
Available options may differ depending on the shooting conditions.

• Flash options are not available if you set Burst options or select
Self-Portrait or Blink Detection. from the flash. (p. 110)

• Make sure that your subjects are within the recommended distance • If light from the flash is reflected or there is a substantial amount of dust in the air, tiny spots may appear in your photo. [ ], and then selecting Flash.

• In some modes, you can also set the flash option by pressing

Shooting options 53

Shooting in the dark
How to use the flash
Press [ ] to pop the flash up when it is need.

Adjusting the ISO sensitivity
The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the International Organization for Standardization (ISO). The higher ISO sensitivity you select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity to capture better photos and reduce camera shake when not using the flash.

When the flash unit is closed, the flash does not fire regardless of the selected option. When the flash unit pops up, the flash fires according to the selected option.
• While not in use, keep the flash unit closed to prevent damage. • Forcing open the flash unit may cause damage to your camera.

1 2 3

In Shooting mode, press [ Select ISO. Select an option.
• Select

].

to use an appropriate ISO sensitivity based on the brightness of the subject and lighting.
• Higher ISO sensitivities may result in more image noise. • If you set the ISO option to , the resolution may change to or smaller.

Press down gently to close.

Shooting options 54

Changing the camera’s focus
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.

Using macro
Use macro to capture close-up photos of subjects, such as flowers or insects.

Using auto focus
To capture sharp photos, select the appropriate focus option according to your distance from the subject.

1

In Shooting mode, press [

].

Focus Normal (AF) Macro Auto Macro Super Macro
Back Select

• Try to hold the camera firmly to prevent blurry photos. • Turn off the flash if the distance to the subject is less than 15.7 in.
(40 cm).

Shooting options 55

Changing the camera’s focus

2

Select an option.
Icon Description

Focusing on a selected area
You can focus on an area that you have selected.

Normal (AF): Focus on a subject farther than 31 in. (80 cm) away. Farther than 138 in. (350 cm) away when you use the zoom. Macro: Focus on a subject that is 4-31 in. (10-80 cm) from the camera. 79-138 in. (200-350 cm) when you use the zoom. Auto Macro: • Focus on a subject farther than 4 in. (10 cm) away. Farther than 79 in. (200 cm) away when you use the zoom. • It is set automatically in some shooting modes. Super Macro: Focus on a subject that is 0.4-4 in. (1-10 cm) from the camera.
Available options may differ depending on the shooting conditions.

1 2 3

In Shooting mode, press [

].

Select Focus Area → Selection AF. Press [ ], and then press [ frame to a desired area. / / / ] to move the

Move

Set

• In some modes, you can also set the focus option by pressing
[ ], and then selecting Focus.

• The zoom is not available with the Super Macro option.

4 5

Press [
• Press [

].
] to change the focus area.

Press [Shutter] to capture the photo.

If you use this function, you cannot set Face Detection options, Timer options, and Intelli zoom.

Shooting options 56

Changing the camera’s focus

Using tracking auto focus
Tracking AF allows you to track and auto focus on your subject, even when you are moving.

• If you do not select a focus area, the focus frame will appear in the center of the screen. -

• Tracking a subject may fail when:

1 2 3

In Shooting mode, press [

].

Select Focus Area → Tracking AF. Focus on the subject you want to track, and then press [ ].
• A focus frame appears on the subject and follows the subject

as you move the camera.

the subject is too small the subject moves excessively the subject is backlit or you are shooting in a dark place colors or patterns on the subject and the background are the same - the subject includes horizontal patterns, such as blinds - the camera shakes excessively • When tracking a subject fails, the focus frame will appear as a white single-line frame ( ). • If the camera fails to track the subject, you must reselect the subject to track. • If the camera fails to focus, the focus frame will change to a red single-line frame ( ). • If you use this function, you cannot set Face Detection options, Timer options, and Intelli zoom.

• The white frame means that your camera is tracking the

subject.

• When you half-press [Shutter], the green frame means that

your subject is in focus.

4

Press [Shutter] to capture the photo.

Shooting options 57

Changing the camera’s focus

Adjusting the focus area
You can get clearer photos by selecting an appropriate focus area according to your subject's location in the scene.

1 2 3

In Shooting mode, press [ Select Focus Area. Select an option.
Icon Description

].

Center AF: Focus on the center of the frame (suitable when subjects are located at or near the center). Multi AF: Focus on one or more of 9 possible areas. Selection AF: Focus on the area that you select. (p. 56) Tracking AF: Focus on and track the subject. (p. 57)
Available shooting options may differ depending on the shooting mode.

Shooting options 58

Using Face Detection
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face.

• When your camera detects a face, it tracks the detected face

Detecting faces
Your camera automatically detects up to 10 human faces in one scene.

automatically. • Face Detection may not be effective when: - the subject is far from the camera (The focus frame will appear orange for Smile Shot and Blink Detection.) - it is too bright or too dark - the subject is not facing the camera - the subject is wearing sunglasses or a mask - the subject’s facial expression changes drastically - the subject is backlit or the lighting conditions are unstable • Face Detection is not available when you set the Selection AF or Tracking AF. • Depending on the shooting options you selected, available Face Detection options may differ. • Depending on the Face Detection options you selected, the timer function may not be available. • When you set Face Detection options, the AF area is automatically set to Multi AF. • Depending on the Face Detection options you selected, Burst options may not be available.

1 2

In Shooting mode, press [

].

Select Face Detection → Normal.

The face nearest the camera or nearest the center of the scene appears in a white focus frame and the rest of the faces appear in gray focus frames.
The closer you are to the subjects, the quicker your camera will detect faces.

Shooting options 59

Using Face Detection

Capturing a self portrait shot
Capture photos of yourself. The camera sets the focus distance to close-up, and then emits a beep when ready.

Capturing a smile shot
The camera automatically releases the shutter when it detects a smiling face.

1 2 3 4

In Shooting mode, press [

].

Select Face Detection → Self-Portrait. Compose your shot with the lens facing you. When you hear a quick beep, press [Shutter].

1 2 3

In Shooting mode, press [

].

Select Face Detection → Smile Shot. Compose your shot.
• The camera automatically releases the shutter when it detects

a smiling face.

When faces are located in the center, the camera beeps rapidly.
If you turn Volume off in the sound settings, the camera will not emit a beep. (p. 93)

When your subject smiles broadly, your camera can detect the smile more easily.

Shooting options 60

Using Face Detection

Detecting eye blinking
If your camera detects closed eyes, it will automatically capture 2 photos in succession.

1 2

In Shooting mode, press [

].

Select Face Detection → Blink Detection.

Shooting options 61

Adjusting brightness and color
Learn how to adjust the brightness and color for better image quality.

Adjusting the exposure manually (EV)
Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo.

3

Select a value to adjust the exposure.
• The photo will be brighter as the exposure value increases.

EV : +1.0

Cancel

Set

 Darker (-)

 Neutral (0)

 Brighter (+)

4

Press [

] to save your settings.

1 2

• Once you adjust the exposure, the setting will be stored

In Shooting mode, press [ Select EV.

].

automatically. You may need to change the exposure value later to avoid overexposure or underexposure. • If you cannot decide on an appropriate exposure, select the AEB (Auto Exposure Bracket) option. The camera will capture 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. (p. 66)

Shooting options 62

Adjusting brightness and color

Compensating for backlighting (ACB)
When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option.

Changing the metering option
The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select.

1 2 3

In Shooting mode, press [ Select Metering. Select an option.
Icon Description

].

 Without ACB

 With ACB

1 2 3

Multi: • Your camera divides the frame into several areas, and then measures the light intensity of each area. • Suitable for general photos.

In Shooting mode, press [ Select ACB. Select an option.
Icon Description

].

Spot: • Your camera measures only the light intensity at the very center of the frame. • If a subject is not in the center of the frame, your photo may be improperly exposed. • Suitable for a subject with backlighting. Center-weighted: • Your camera averages the meter reading of the entire frame with emphasis placed on the center. • Suitable for photos with subjects in the center of the frame.

Off: ACB (Auto Contrast Balance) is deactivated. On: ACB (Auto Contrast Balance) is activated.
• The ACB feature is always on in Smart Auto mode. • The ACB feature is not available when you set Burst options.

Shooting options 63

Adjusting brightness and color

Selecting a White Balance setting
The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select a White Balance setting that is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.

1 2 3

In Shooting mode, press [ Select White Balance. Select an option.
Icon Description

].

Auto WB: Automatically set the White Balance based on the lighting conditions. Daylight: For outdoor photos on a sunny day. Auto WB Daylight Cloudy: For outdoor photos on a cloudy day or in shadows. Fluorescent_H: For shooting under a daylight fluorescent or 3-way fluorescent light. Fluorescent_l: For shooting under white fluorescent light. Tungsten: For shooting indoor photos under incandescent bulbs or halogen lamps. Cloudy Tungsten Custom Set: To use White Balance settings that you define. (p. 65) Color Temp.: To adjust the color temperature of the light source. (p. 65)

Shooting options 64

Adjusting brightness and color
Defining your own White Balance
You can customize the White Balance by capturing a photo of a white surface, such as a piece of paper, under the lighting conditions in which you intend to capture a photo. The White Balance feature will help you to match the colors in your photo with the actual scene.

Adjusting color temperature

1 2 3

In Shooting mode, press [

].

1 2 3

In Shooting mode, press [

].

Select White Balance → Color Temp. Press [ / ] to adjust the color temperature to match your light source.
• You can capture a warmer photo with a higher color

Select White Balance → Custom Set. Aim the lens at a piece of white paper, and then press [Shutter].

temperature setting (more yellow/red), and a cooler photo with a lower color temperature setting (more blue).

Color Temp. : 6500K

Cancel

Set

4

Press [

] to save your settings.

Shooting options 65

Using burst modes
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difficult to adjust the exposure correctly and select a proper light source. In these cases, select one of the burst modes.
Icon Description

Motion Capture: While you are pressing [Shutter], the camera captures photos (5 photos per second; maximum of 30 photos). AEB: • Capture 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. • Use a tripod to prevent blurry photos.
• You can use the flash, timer, OIS, and ACB only when you select
Single.

1 2 3

In Shooting mode, press [ Select Drive. Select an option.
Icon Description

].

• When you select Motion Capture, your camera will set the resolution to and set the ISO sensitivity to Auto.

Single: Capture a single photo. Continuous: • While you are pressing [Shutter], the camera continuously captures photos. • The maximum number of photos depends on the capacity of your memory card.

• Depending on the Face Detection option you selected, some Burst options may not be available.

Shooting options 66

Adjusting images
Adjust the sharpness, contrast, or saturation of your photos.

1 2 3

In Shooting mode, press [ Select Image Adjust. Select an option.
• Sharpness • Contrast • Saturation

].

4

Press [ /
Sharpness +

] to adjust each value.
Description

Soften the edges on your photos (suitable for editing the photos on your computer). Sharpen the edges to improve the clarity of your photos. This may also increase the noise in your photos.
Description

Contrast
Image Adjust
Sharpness Contrast Saturation

+ Saturation Set

Decrease the color and brightness. Increase the color and brightness.
Description

Decrease the saturation. Increase the saturation.

Cancel

+

5

Press [

] to save your settings.

Select 0 if you do not want to apply any effects (suitable for printing).

Shooting options 67

Playback/Editing
Learn how to play back photos or videos, and edit photos or videos. Also, learn how to connect your camera to your computer, TV, HDTV, or 3D TV.

Viewing photos or videos in Playback mode ………………………………………… 69
Starting Playback mode ………………… 69 Viewing photos …………………………… 74 Playing a video …………………………… 76

Viewing files on a TV, HDTV, or 3D TV …… 82 Transferring files to your Windows computer …………………………………… 85
Transferring files with Intelli-studio ………… 86 Transferring files by connecting the camera as a removable disk ……………………… 88 Disconnecting the camera (for Windows XP) ………………………… 89

Editing a photo ……………………………… 78
Resizing photos …………………………… Rotating a photo ………………………… Applying Smart Filter effects ……………… Adjusting your photos …………………… Creating a print order (DPOF) …………… 78 78 79 80 81

Transferring files to your Mac computer … 90

Viewing photos or videos in Playback mode
Learn how to play back photos or videos and how to manage files.

Starting Playback mode
View photos or play videos stored in your camera.

Photo file information
Memory in use File Information Histogram
Album/Zoom In

1 2

Press [ file. ].

• The most recent file will be displayed. • If the camera is off, it will turn on and display the most recent

Press [ /

] to scroll through files.
] to scroll through files quickly.
Icon Description

• Press and hold [ /

• If you want to view files stored in the internal memory, remove your memory card. • You may not be able to edit or play back files that were captured with other cameras, due to unsupported sizes (image size, etc) or codecs. Use a computer or another device to edit or play back these files.

Current file/Total files Folder name–File name Protected file Print order has been set (DPOF)

To display file information on the screen, press [

].

Playback/Editing 69

Viewing photos or videos in Playback mode
Video file information Viewing files by category in Smart Album
View files by category, such as date or file type.

File Information
Album Play Capture

1 2 3

In Playback mode, rotate [Zoom] to the left. Press [ ].

Select Filter → a category.
Filter All Date File Type

Icon

Description

Current file/Total files Folder name-File name Current playback time Video length Protected file
Icon
Back Select

Description

All: View files normally.
To display file information on the screen, press [ ].

Date: View files by the date they were saved. File Type: View files by the file type.

Playback/Editing 70

Viewing photos or videos in Playback mode

4 5 6

Scroll to a desired list, and then press [ open the list. Scroll to a desired file, and then press [ view the file.

] to ] to

Viewing files as thumbnails
Scan thumbnails of files. In Playback mode, rotate [Zoom] to the left to view thumbnails (12 at a time). Rotate [Zoom] to the left once more to display more thumbnails (24 at a time). Rotate [Zoom] to the right to return to the previous view.

Rotate [Zoom] to the left to return to the previous view.
It may take some time for the camera to open Smart Album, change the category, or reorganize files.

Menu

Press [

/

/ /

] to scroll through files.

Playback/Editing 71

Viewing photos or videos in Playback mode
Protecting files
Protect your files from accidental deletion.

Deleting files
Select files to delete in Playback mode. Deleting a single file You can select one file, and then delete it.

1 2

In Playback mode, press [ Select Protect → On.
You cannot delete or rotate a protected file.

].

1 2

In Playback mode, select a file, and then press [ ]. When the pop-up message appears, select Yes.
You can also delete files in Playback mode by pressing [ selecting Delete → Delete → Yes. ], and then

Playback/Editing 72

Viewing photos or videos in Playback mode
Deleting multiple files You can select multiple files, and then delete them at once. Deleting all files You can select all files, and then delete them at once.

1 2 3 4 5

In Playback mode, press [ ].
• When in thumbnails view, press [

], select Delete → Select, and then skip to step 3, or press [ ], select Select, and then skip to step 3.

1 2 3

In Playback mode, press [
• When in thumbnails view, press [

].

], select Delete → Delete All, and then skip to step 3, or press [ ], select Delete All, and then skip to step 3.

When the pop-up message appears, select Multiple Delete. Scroll to each file you want to delete, and then press [ ].
• Press [

Select Delete → Delete All. When the pop-up message appears, select Yes.
• All unprotected files are deleted.

] again to cancel your selection.

Copying files to a memory card
Copy files from the internal memory to a memory card.

Press [ ]. When the pop-up message appears, select Yes.

1 2

In Playback mode, press [ Select Copy to Card.

].

Playback/Editing 73

Viewing photos or videos in Playback mode

Viewing photos
Enlarge part of a photo or view photos as a slide show.

To Move the enlarged area Trim the enlarged photo

Description

Press [

/

/ /

].

Enlarging a photo

Press [ ], and then select Yes. (The trimmed photo will be saved as a new file. The original photo is retained in its original form.)

In Playback mode, rotate [Zoom] to the right to enlarge a portion of the photo. Rotate [Zoom] to the left to zoom out.

When you view photos that were captured by another camera, the zoom ratio may differ.

Enlarged area

Crop Crop

Playback/Editing 74

Viewing photos or videos in Playback mode
Viewing panoramic photos
View photos captured in Live Panorama mode.

Playing a slide show

1 2

In Playback mode, press [ / panoramic photo. Press [ ].

] to scroll to a desired

Apply effects and audio to a slide show of your photos. The slide show function does not work for videos.

• The entire panoramic photo appears on the screen. • The camera automatically scrolls through the photo from left to

1 2 3

In Playback mode, press [ Select Slide Show Options.

].

Select a slide show effect option.
• Skip to step 4 to start a slide show with no effects.
* Default

right for a horizontal panoramic photo and from top to bottom for a vertical panoramic photo. The camera then switches to Playback mode. • While playing back a panoramic photo, press [ ] to pause or resume. • After you have paused the playback of a panoramic photo, press [ / / / ] to move the photo horizontally or vertically, depending on the direction you moved when capturing the photo.

Option Play Mode

Description

Set whether or not to repeat the slide show. (One Play*, Repeat)
• Set the interval between photos.

Interval

(1 sec*, 3 sec, 5 sec, 10 sec) interval.

• You must set the Effect option to Off to set the

3

Press [

] to return to Playback mode.

Music

Set background audio.
• Set a scene change effect between photos.

The camera automatically scrolls through the panoramic photo only if the longest side of the photo is two or more times longer than the shortest side.

(Off, Calm*, Relax, lively, Sweet, Shine)

Effect

• Select Off to cancel effects. • When you use the Effect option, the interval

between photos will be set to 1 second.

Playback/Editing 75

Viewing photos or videos in Playback mode

4 5 6

Press [

].

Playing a video
In Playback mode, you can view a video, and then capture or trim parts of the playing video. You can save the captured or trimmed segments as new files.

Select Start Slide Show. View the slide show.
• Press [ • Press [ • Press [

] to pause the slide show. ] again to resume the slide show.

], and then press [ / ] to stop the slide show and return to Playback mode. • Rotate [Zoom] to the left or right to adjust the volume level.

1 2

In Playback mode, select a video, and then press [ View the video.
Current playback time/ Video length

].

Pause

Stop

To Scan backward Pause or resume playback Scan forward Adjust the volume level

Description

Press [ ]. Each time you press [ ], you change the scan speed in this order: 2X, 4X, 8X. Press [ ].

Press [ ]. Each time you press [ ], you change the scan speed in this order: 2X, 4X, 8X. Rotate [Zoom] to the left or right.

Playback/Editing 76

Viewing photos or videos in Playback mode
Trimming a video Capturing an image from video

1 2 3 4 5 6 7 8

In Playback mode, select a video, and then press [ ]. Select Trim Movie. Press [ ] to start playing the video.

1 2

While viewing a video, press [ want to capture an image. Press [ ].

] at the point where you

• The resolution of the captured image will be the same as the original video. Press [ ] → [ ] at the point where you want the trimming to begin. Press [ ] to resume playing the video.

• The captured image is saved as a new file.

Press [ ] → [ ] at the point where you want the trimming to end. Press [ ] to trim.

When the pop-up message appears, select Yes.
• The original video should be at least 10 seconds long. • The camera will save the edited video as a new file and leave the original video intact.

Playback/Editing 77

Editing a photo
Learn how to edit photos.
• The camera will save edited photos as new files. • When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower resolution.

Resizing photos
Change the size of a photo and save it as a new file.

Rotating a photo

1 2 3

In Playback mode, select a photo, and then press [ ]. Select Resize. Select an option.
Resize 2592 X 1944 1984 X 1488 1024 X 768

1 2 3 4 5

Rotate the mode dial to Select .

.

Rotate [Zoom] to the left, and then select a photo. Select Rotate → an option. Press [ ] to save.

Rotate : Right 90˚

Back

Select Cancel Save

Available resize options differ depending on the original size of the photo.

• The camera will overwrite the original file. • In Playback mode, press [ ], and then select Rotate to rotate a photo.

Playback/Editing 78

Editing a photo

Applying Smart Filter effects
Apply special effects to your photos.

Option Cross Filter Fish-eye Old Film Classic Retro

Description

1 2 3 4

Rotate the mode dial to Select .

.

Add lines that radiate outward from bright objects to imitate the visual effect of a cross filter. Distort close objects to imitate the visual effect of a fisheye lens. Apply a vintage film effect. Apply a black and white effect. Apply a sepia tone effect.

Rotate [Zoom] to the left, and then select a photo. Select Smart Filter → an option.

5
Miniature

Press [

] to save.

Back

Set

Option Normal Miniature Vignetting

Description

No effect Apply a tilt-shift effect to make the subject appear in miniature. Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.

Playback/Editing 79

Editing a photo

Adjusting your photos
Learn how to adjust the brightness, contrast, or saturation or how to correct the red-eye effect. If the center of a photo is dark, you can adjust it to be brighter. The camera will save an edited photo as a new file, but may convert it to a lower resolution.
• You can adjust brightness, contrast, and saturation and apply Smart
Filter effects at the same time. at the same time.

5 6 7 1 2 3 4 5

Press [ / Press [ Press [ ].

] to adjust the option.

] to save.

Adjusting dark subjects (ACB)

• You cannot apply the ACB, Face Retouch, and Red-eye Fix effects

Rotate the mode dial to Select .

.

Adjusting brightness, contrast, or saturation

1 2 3 4

Rotate the mode dial to Select .

.

Rotate [Zoom] to the left, and then select a photo. Select ACB. Press [ ] to save.

Rotate [Zoom] to the left, and then select a photo. Select an adjusting option.
Icon Description

Brightness Contrast Saturation

Playback/Editing 80

Editing a photo
Retouching faces

Creating a print order (DPOF)
.
Select photos to print and save print options in the Digital Print Order Format (DPOF). This information is saved in the MISC folder on your memory card for convenient printing on DPOF-compatible printers.

1 2 3 4 5 6 1 2 3 4 5

Rotate the mode dial to Select .

Rotate [Zoom] to the left, and then select a photo. Select Face Retouch. Press [ / smoother. 1 2 3

In Playback mode, select a photo you want to print, and then press [ ]. Select DPOF. Press [ / ] to select the number of copies, and then press [ ].
• You can take the memory card to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. • Photos with dimensions that are wider than the paper may be cut off on the left and right edges. Ensure that your photo dimensions are compatible with the paper you select. • You cannot set DPOF options for photos stored in the internal memory. • If you specify the print size, you can print photos only with DPOF 1.1-compatible printers.

] to adjust the option.

• As the number increases, the skin tone becomes brighter and

Press [

] to save.

Removing red-eye

Rotate the mode dial to Select .

.

Rotate [Zoom] to the left, and then select a photo. Select Red-eye Fix. Press [ ] to save.

Playback/Editing 81

Viewing files on a TV, HDTV, or 3D TV
Play back photos or videos by connecting your camera to a TV with the A/V cable.

1 2 3 4 5

Rotate the mode dial to

.

6 7 8

Select Connectivity → Video Out. Select the video signal output for your country or region. (p. 94) Turn off your camera and TV. Connect your camera to your TV with the A/V cable.
Audio Video

Turn on your TV, and then select the A/V video source with the TV remote control. Turn on your camera.
• The camera automatically enters into Playback mode when

you connect it to a TV.

View photos or play videos using the camera buttons.
• Depending on the TV model, you may see some digital noise or part of an image may not appear. TV settings.

• Images may not be centered on the TV screen depending on your

Playback/Editing 82

Viewing files on a TV, HDTV, or 3D TV
Viewing files on an HDTV
You can view high-quality and uncompressed photos or videos on an HDTV using the optional HDMI cable. HDMI (High Definition Multimedia Interface) is supported by most HDTVs.

6

Turn on your camera.
• If you have an Anynet+ compatible Samsung HDTV and you

1 2 3 4 5

Rotate the mode dial to

.

Select Connectivity → HDMI Size. Select an HDMI resolution. (p. 95) Turn off your camera and HDTV. Connect your camera to your HDTV with the optional HDMI cable.

have turned on your camera’s Anynet+ function, the HDTV turns on automatically and displays the camera screen, while the camera automatically enters Playback mode. • If Anynet+ is off in your camera or your TV does not have Anynet+, the TV does not turn on automatically. Turn the TV on manually.

7

View files using the buttons on your camera or, if the TV has Anynet+, the remote control of your HDTV.
• If your HDTV supports the Anynet+(CEC) profile, turn Anynet+ on in the camera’s settings menu (p. 94) to control the camera and TV with the TV’s remote control. • Anynet+ lets you control all connected Samsung A/V devices with the TV remote control. • The time it takes for the camera to connect to your HDTV may vary with the type of SD, SDHC, or SDXC card you use. A faster SD, SDHC, or SDXC card will not necessarily result in a faster HDMI transfer, because the main function of the card is to improve the transfer rate during shooting.

Playback/Editing 83

Viewing files on a TV, HDTV, or 3D TV
Viewing files on a 3D TV
You can view photos captured in 3D Photo on a 3D TV.

6

Turn on your camera.
• If you have an Anynet+ compatible Samsung 3D TV and you

1 2 3 4 5

Rotate the mode dial to

.

Select Connectivity → HDMI Size. Select an HDMI resolution. (p. 95) Turn off your camera and 3D TV. Connect your camera to your 3D TV with the optional HDMI cable.

have turned on your camera's Anynet+ function, the 3D TV turns on automatically and displays the camera screen, while the camera automatically enters Playback mode. • If Anynet+ is off in your camera or your TV does not have Anynet+, the TV does not turn on automatically. Turn the TV on manually.

7 8 9

Press [
• Press [

] to switch to 3D TV Mode.
] again to switch to 2D TV Mode.

Turn on your TV’s 3D function.
• Refer to your TV’s user manual for more details.

View 3D photos with the buttons on your camera or, if the TV has Anynet+, the remote control of your 3D HDTV.
• You cannot view an MPO file in 3D on TVs that do not support the file format.

• Use proper 3D glasses when you view an MPO file on a 3D TV.

Do not view the 3D images captured by your camera on a 3D TV or 3D monitor for an extended period of time. It may cause unpleasant symptoms, such as eyestrain, fatigue, nausea, and dizziness.

Playback/Editing 84

Transferring files to your Windows computer
Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web.

Requirements
Item CPU RAM OS* Hard disk capacity Requirements

• The requirements are recommendation only. Intelli-studio may not

Intel® Pentium®4 3.2 GHz or higher/ AMD Athlon™ FX 2.6 GHz or higher Minimum 512 MB RAM (1 GB or more recommended) Windows XP SP2, Windows Vista, or Windows 7 250 MB or more (1 GB and above recommended)
• CD-ROM drive • 1024 X 768 pixels, 16-bit color display compatible

work properly even when the computer meets the requirements, depending on the condition of your computer. • If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos. • Install DirectX 9.0c or later before you use Intelli-studio. • Your computer must be running Windows XP, Windows Vista, or Windows 7 for you to connect the camera as a removable disk.

The manufacturer is not responsible for any damage that results from using unqualified computers such as a computer you assembled yourself.

Others

monitor (1280 X 1024 pixels, 32-bit color display recommended) • USB 2.0 port • nVIDIA Geforce 7600GT or higher/ ATI X1600 series or higher • Microsoft DirectX 9.0c or higher

* A 32-bit version of Intelli-studio will be installed—even on 64-bit editions of Windows XP, Windows Vista, and Windows 7.

Playback/Editing 85

Transferring files to your Windows computer

Transferring files with Intelli-studio
You can download Intelli-studio from the linked webpage and install it on your computer. When you connect the camera to a computer with Intelli-studio installed, the program will launch automatically.

5

Turn on the camera.
• When the Intelli-studio installation pop-up appears on the

1 2 3 4

Rotate the mode dial to

.

computer screen, follow the on-screen instructions to complete the installation. • Once the Intelli-studio is installed on your computer, the computer recognizes the camera and launches the Intelli-studio automatically.

Select Connectivity → PC Software → On. Turn off the camera. Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

6

Select a destination folder on your computer, and then select Yes.
• New files stored on the camera will automatically transfer to

the selected folder.

• If your camera has no new files, the pop-up window for saving

new files will not appear.

For Windows Vista and Windows 7, select Run ilinker.exe from the Auto Play window to start Intelli-studio. If Run ilinker.exe does not appear on the computer, click → Computer → Intelli-studio, and then follow the on-screen instructions to complete the Intelli-studio installation.

Playback/Editing 86

Transferring files to your Windows computer
Using Intelli-studio
Intelli-studio allows you to play back and edit files. For details, select Help → Help from the program toolbar.
• You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing. • Intelli-studio supports the following formats:
- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG) - Photos: JPG, GIF, BMP, PNG, TIFF

1 % $

2

3

4

5 6 7 8

#

9 @ 0

!

Playback/Editing 87

Transferring files to your Windows computer

No.

Description

1 2 3 4 5 6 7 8 9 0 ! @ # $ %

Open menus. Display files in the selected folder. Switch to the Photo edit mode. Switch to the Video edit mode. Switch to the Sharing mode (to send files by email or upload files to websites, such as Flickr or YouTube). Enlarge or reduce the thumbnails in the list. Select a file type. View files in the selected folder on your computer. Show or hide files on the connected camera. View files in the selected folder on the camera. View files as thumbnails or on a map. Browse folders stored on the camera. Browse folders stored on your computer. Move to the previous or next folder. Print files, view files on a map, store files in My Folder, or register faces.

Transferring files by connecting the camera as a removable disk
Connect the camera to your computer as a removable disk.

1 2 3 4

Rotate the mode dial to

.

Select Connectivity → PC Software → Off. Turn off the camera. Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

Playback/Editing 88

Transferring files to your Windows computer

5 6 7

Turn on the camera.
• The computer recognizes the camera automatically.

Disconnecting the camera (for Windows XP)
With Windows Vista and Windows 7, the methods for disconnecting the camera are similar.

On your computer, select My Computer → Removable Disk → DCIM → 100PHOTO. Drag or save files to your computer.

1 2

Verify that the status lamp is not blinking.
• The status lamp blinks when transferring files. Wait until it

stops.

Click on the tool bar at the bottom right of your computer screen.

3 4 5

Click the pop-up message. Click the message box that indicates the camera can be removed safely. Remove the USB cable.
The camera may not disconnect safely while Intelli-studio is running. End the program before disconnecting the camera.

Playback/Editing 89

Transferring files to your Mac computer
When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.

1

Connect your camera to a Macintosh computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

2 3 4

Turn on the camera.
• The computer recognizes the camera automatically and

displays a removable disk icon.

Double-click the removable disk icon. Drag or save files to your computer.

Playback/Editing 90

Settings
Refer to options to configure your camera’s settings.

Settings menu ……………………………………………92
Accessing the settings menu ……………………… Sound ……………………………………………… Display ……………………………………………… Connectivity ………………………………………… General ……………………………………………… 92 93 93 94 95

Settings menu
Learn to configure your camera's settings.

Accessing the settings menu

3

Select an item.
Sound Volume Beep Sound Shutter Sound Start Sound AF Sound Back Select Medium On Sound 1 Off On

1 2

Rotate the mode dial to Select a menu.
Settings Sound Display Connectivity General

.

4

Select an option.
Volume

Option

Description

Off Low Medium High Back Select

Sound: Set various camera sounds and the volume. (p. 93) Display: Customize the display settings. (p. 93) Connectivity: Set the connection options. (p. 94) General: Change the settings for the camera system such as memory format and default file name. (p. 95)

5

Press [

] to return to the previous screen.

Settings 92

Settings menu

Sound
* Default

Display
* Default

Item Volume Beep Sound Shutter Sound

Description

Item

Description

Set the volume of all sounds. (Off, low, Medium*, High) Set to emit a sound when you press the buttons or switch modes. (Off, On*) Set the sound the camera emits when you press the shutter button. (Off, Sound 1*, Sound 2, Sound 3) Set the sound the camera emits when you turn on your camera. (Off*, Star Flight, laser Show, Cloud) Set to emit a sound when you half-press the shutter button. (Off, On*)
Guide Line Date/Time Display Help Display Start Image

Set a start image to display when the camera turns on. • Off*: Display no start image. • logo: Display a default image stored in the internal memory. • User Image: Select User Image from the photos you captured in the memory.
• The camera will save only one User Image in the internal memory at a time.

Start Sound AF Sound

• If you select a new photo as a User Image or

reset your camera, the camera will delete the current image.

Select a guide to help you compose a scene. (Off*, 2 X 2, 3 X 3, Cross, Diagonal) Set whether or not to display the date and time on the camera's display. (Off*, On) Display a brief description of an option or menu. (Off, On*)

Settings 93

Settings menu
* Default

Item Display Brightness

Description

Connectivity
* Default

Adjust the brightness of the screen. (Auto*, Dark, Normal, Bright)
Normal is fixed in Playback mode even if you have selected Auto.

Item

Description

Quick View

Set whether or not to review a captured image before returning to the Shooting mode. (Off, On*) If you perform no operations for 30 seconds, the camera automatically switches to Auto Display Off mode. (Off*, On)

Video Out

Set the video signal output for your region. • NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico • PAl (supports only BDGHI): Australia, Austria, Belgium, China, Denmark, England, Finland, France, Germany, Italy, Kuwait, Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain, Sweden, Switzerland, Thailand Turn on to control the camera with a TV remote control when you connect it to an HDTV that supports the Anynet+(CEC) profile. • Off: View files without using an HDTV remote control. • On*: Control the camera with an HDTV remote control.

Auto Display Off

• In Auto Display Off mode, press any button

other than [POWER] to resume using the camera. • Even if you do not set the Auto Display Off mode, the screen will dim 30 seconds after the last operation to save power.

Anynet+ (HDMI-CEC)

Settings 94

Settings menu
* Default

Item

Description

General
* Default

HDMI Size

Set the resolution of photos when the camera plays back files on an HDTV via the HDMI cable. (NTSC: 1080i*, 720p, 480p/ PAL: 1080i*, 720p, 576p) • If the HDTV does not support the selected resolution, the HDTV automatically selects the next lower resolution. Set Intelli-studio to launch automatically when you connect your camera to your computer. (Off, On*)

Item Language Time Zone Date/Time Set

Description

Set a language for the display text. Set the time zone for your location. When you travel to another country, select Visit, and then select the appropriate time zone. (Home*, Visit) Set the date and time. Set a date format. (YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY)
The default date type may differ depending on the language selected.

PC Software

Date Type

Set the time format. (12 Hr, 24 Hr)
Time Type
The default time type may differ depending on the language selected.

Settings 95

Settings menu
* Default * Default

Item

Description

Item

Description

Specify how to name files. • Reset: Set the file number to start from 0001 when you insert a new memory card, format a memory card, or delete all files. • Series*: Set the file number to resume from the previous file number when you insert a new memory card, format a memory card, or delete all files.
• The default name of the first folder is File No.
100PHOTO and the default name of the first file is SAM_0001.

Set whether or not to display the date and time on captured photos. (Off*, Date, Date & Time)
• The date and time will be displayed on the bottom right corner of the photo. and time properly.

Imprint

• Some printer models may not print the date • The photo will not display the date and time if:
- you select Text in mode - you select mode - you select 3D Photo, Picture in Picture in mode

• The file number increases by one, from

SAM_0001 to SAM_9999, each time you take a picture. • The folder number increases by one, from 100PHOTO to 999PHOTO, each time a folder is full. • The maximum number of files that can be stored in one folder is 9,999. • The camera defines file names according to the Design rule for Camera File system (DCF) standard. If you intentionally change file names, the camera may not play back the files.

Set the camera to automatically turn off when you perform no operations for a specified period. (Off, 1 min, 3 min*, 5 min, 10 min)
Auto Power Off • Your settings will not change when you replace the battery.

• The camera will not automatically turn

off when the camera is connected to a computer and when you are playing a slide show or videos.

AF Lamp

Set a light to automatically turn on in dark places to help you focus. (Off, On*)

Settings 96

Settings menu
* Default

Item

Description

Format the internal memory and the memory card. Formatting will delete all files, including protected files. (Yes, No)
Format
Errors can occur if you use a memory card formatted by another brand of camera, a memory card reader, or a computer. Please format memory cards in the camera before using them to capture photos.

Reset Open source licenses

Reset menus and shooting options. Date and time, language, and video output settings will not be reset. (Yes, No) Show the Open source licenses information.

Settings 97

Appendixes
Get information about error messages, specifications, and maintenance.

Error messages …………………………………………99 Camera maintenance ………………………………… 100
Cleaning your camera ……………………………… 100 Using or storing the camera ………………………… 101 About memory cards ……………………………… 102 About the battery …………………………………… 105

Before contacting a service center ………………… 107 Camera specifications ……………………………… 110 Glossary ……………………………………………… 114 FCC notice …………………………………………… 119 Index …………………………………………………… 120

Error messages
When the following error messages appear, try these remedies.
Error message Suggested remedies • Turn off your camera, and then turn it on Card Error Error message File Error File system not supported. Low Battery Memory Full No Image File Suggested remedies

again. • Remove your memory card, and then insert it again. • Format your memory card. You can lock an SD, SDHC, or SDXC card to prevent files from being deleted. Unlock the card when shooting.

Delete the damaged file or contact a service center. Your camera does not support the FAT file structure of the inserted memory card. Format the memory card on the camera. Replace with new AA alkaline batteries. Delete unnecessary files or insert a new memory card. Capture photos or insert a memory card that contains some photos.

Card Locked

Card not supported.

The inserted memory card is not supported by your camera. Insert a SD, SDHC, or SDXC memory card. File names do not match the DCF standard. Transfer the files from the memory card to your computer and format the card. Then, open the Settings menu and select File No. → Reset. (p. 96)

DCF Full Error

Appendixes 99

Camera maintenance
Cleaning your camera
Camera lens and display
Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe gently.

Camera body
Wipe gently with a soft, dry cloth.

• Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction. cover.

• Do not press on the lens cover or use a blower brush on the lens

Appendixes 100

Camera maintenance

Using or storing the camera
Inappropriate places to use or store the camera
• Avoid exposing the camera to very cold or very hot

Storing for extended period of time
• When you store the camera for an extended period, place it in a

sealed container with an absorbent material, such as silica gel.

• Remove the batteries from your camera when storing it for an

temperatures.

• Avoid using your camera in areas with extremely high humidity,

or where the humidity changes drastically.

• Avoid exposing the camera to direct sunlight and storing it in

hot, poorly-ventilated areas, such as in a car during summer time. • Protect your camera and the display from impact, rough handling, and excessive vibration to avoid serious damage. • Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components. • Do not use your camera near fuels, combustibles, or flammable chemicals. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories. • Do not store the camera where there are mothballs.

extended period. Installed batteries may leak or corrode over time and cause serious damage to your camera. • Batteries discharge even when the camera is not being used. Ensure that you replace the batteries with new AA alkaline batteries if you use the camera again after storing it for an extended period of time. • The present date and time can be initialized when the camera is turned on after the camera and battery have been separated for over 72 hours.

Using the camera with caution in humid environments
When you transfer the camera from a cold environment to a warm one, condensation can form on the lens or internal components of the camera. In this situation, turn off the camera and wait for at least 1 hour. If condensation forms on the memory card, remove the memory card from the camera and wait until all moisture has evaporated before reinserting it.

Using on beaches or shores
• Protect your camera from sand and dirt when you use it on

Other cautions
• Do not swing your camera by the strap. This may cause injury

beaches or in similar areas. • Your camera is not waterproof. Do not handle the battery or memory card with wet hands. Operating the camera with wet hands may cause damage to your camera.

to yourself or others or damage to your camera. prevent proper operation.

• Do not paint your camera, as paint can clog moving parts and

Appendixes 101

Camera maintenance
• Turn off the camera when not using it. • Your camera contains delicate parts. Avoid impacts to the • Paint or metal on the outside of the camera may cause

camera. • Protect the display from external force by keeping it in the case when not in use. Protect the camera from scratches by keeping it away from sand, sharp implements, or loose change. • Do not use the camera if the screen is cracked or broken. Broken glass or acrylic could cause injury to your hands and face. Take the camera to a Samsung service center to have it repaired. • Never place cameras, batteries, or accessories near, on, or in heating devices, such as microwave ovens, stoves, or radiators. These devices may be deformed and can overheat and cause a fire or explosion. • Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction. • Protect the lens from fingerprints and scratches. Clean the lens with a soft, clean, debris-free lens cloth. • The camera may turn off if struck or dropped. This is to protect the memory card. Turn on the camera to use it again. • While you use the camera, it may heat up. This is normal and should not affect your camera’s lifespan or performance. • When you use the camera in low temperatures, it may take some time to turn on, the color of the display may be changed temporarily, or after-images may appear. These conditions are not malfunctions and they will correct themselves when the camera is returned to milder temperatures.

allergies, itchy skin, eczema, or swelling for people with sensitive skin. If you experience any of these symptoms, stop using the camera immediately and consult a doctor. • Do not insert foreign objects into any of your camera’s compartments, slots, or access points. Damage due to improper use may not be covered by your warranty. • Do not allow unqualified personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualified service is not covered by your warranty.

About memory cards
Supported memory cards
This product supports SD (Secure Digital), SDHC (Secure Digital High Capacity), SDXC (Secure Digital eXtended Capacity), microSD, microSDHC, or microSDXC memory cards. Terminal Write-protect switch Label (front) You can prevent files from being deleted by using the writeprotect switch on an SD, SDHC, or SDXC card. Slide the switch down to lock or slide it up to unlock. Unlock the card when capturing photos and videos.

Appendixes 102

Camera maintenance
Size Super Fine Fine Normal

Memory card adapter

234 300

343 457 639 911 1,272 1,727

505 599 832 1,123 1,585 1,897

Memory card To use micro memory cards with this product, a PC, or a memory card reader, insert the card into an adapter.

457 737 956 1,465

Memory card capacity
The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 1 GB SD card: Photo
Size Super Fine Fine Normal

Video
Size 1280 X 720 640 X 480 320 X 240 30fps 15fps

Approx. 18' 03" Approx. 51' 20" Approx. 177' 32"

Approx. 35' 08" Approx. 89' 59" Approx. 305' 36"

159 177 204 234

240 282 300 343

355 384 417 505

* The figures above are measured without using the zoom function. Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time.

Appendixes 103

Camera maintenance
Cautions when using memory cards
• Avoid exposing memory cards to very cold or very hot • Prevent memory cards from making contact with liquids, dirt, or

temperatures (below 0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause memory cards to malfunction. • Insert a memory card in the correct direction. Inserting a memory card in the wrong direction may damage your camera and memory card. • Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera. • Turn off the camera before you insert or remove the memory card. • Do not remove the memory card or turn off your camera while the lamp is blinking, as this may damage your data. • When the lifespan of a memory card has expired, you cannot store any more photos on the card. Use a new memory card. • Do not bend, drop, or subject memory cards to heavy impact or pressure. • Avoid using or storing memory cards near strong magnetic fields. • Avoid using or keeping memory cards in areas with high temperature, high humidity, or corrosive substances.

foreign substances. If dirty, wipe the memory card clean with a soft cloth before you insert the memory card into your camera. • Do not allow liquids, dirt, or foreign substances to come in contact with memory cards or the memory card slot. Doing so may cause memory cards or the camera to malfunction. • When you carry a memory card, use a case to protect the card from electrostatic discharges. • Transfer important data to other media, such as a hard disk, CD, or DVD. • When you use the camera for an extended period, the memory card may become warm. This is normal and does not indicate a malfunction.
The manufacturer is not responsible for any loss of data.

Appendixes 104

Camera maintenance

About the battery low battery message
When the batteries discharge completely, the battery icon turns red and a message ‘low Battery’ appears. Replace with new AA alkaline batteries.

Cautions about using the battery
Protect batteries and memory cards from damage Prevent batteries from making contact with metal objects, as this can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage and may cause a fire or electric shock.

Notes about using the battery
• Avoid exposing batteries to very cold or very hot temperatures

Handle and dispose of batteries with care
• Never dispose of batteries in a fire. Follow all local regulations

(below 0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can reduce the battery life. • When you use the camera for an extended period, the area around the battery chamber may become warm. This does not affect the normal use of the camera. • In temperatures below 0 °C/32 °F, battery capacity and battery life may decrease. • Battery capacity may decrease in low temperatures but will return to normal in milder temperatures. • Primary cells cannot be recharged. If you try to recharge it, the batteries may leak. • Battery capacity may vary by manufacturer.

when you dispose of used batteries.

• Never place batteries or cameras on or in heating devices,

such as microwave ovens, stoves, or radiators. Batteries may explode when they are overheated.

Appendixes 105

Camera maintenance

Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling: • The battery can ignite or explode if not handled properly. If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact a service center. • Do not place the battery near heating devices or expose it to excessively warm environments, such as the inside of an enclosed car in the summertime. • Do not place the battery in a microwave oven. • Avoid storing or using the battery in hot, humid places, such as spas or shower enclosures. • Do not rest the camera on flammable surfaces, such as bedding, carpets, or electric blankets for a prolonged period. • When the camera is switched on, do not leave it in any confined space for a prolonged period. • Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches. • Use only authentic, manufacturer-recommended batteries.

• Do not disassemble or puncture the battery with any

sharp object. forces.

• Avoid exposing the battery to high pressure or crushing • Avoid exposing the battery to major impacts, such as

dropping it from high places. 60 °C (140 °F) or above. moisture or liquids.

• Do not expose the battery to temperatures of • Do not allow the battery to come in contact with • Do not expose the battery to sources of excessive heat

such as sunshine, fire or the like.

• A rechargeable battery (secondary cell) is recommended

for repeated charge and use. Samsung is not responsible for any issues that arise from battery problems.

Disposal guidelines
• Dispose of the battery with care. • Do not dispose of the battery in a fire. • Disposal regulations may differ by country or region.

Dispose of the battery in accordance with all local and federal regulations.

Appendixes 106

Before contacting a service center
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.

Situation Cannot turn on the camera

Suggested remedies • Ensure that the battery is inserted. • Ensure that the battery is inserted

Situation

Suggested remedies • There is no space on the memory card.

correctly. (p. 16) • Replace the batteries.
• Replace the batteries.

• • Cannot capture photos • • • The camera freezes The camera heats up

• Your camera may be in Auto Power Off The power turns off suddenly

mode. (p. 96)

• The camera may turn off to prevent the

memory card from being damaged due to an impact. Turn on your camera again.

• The battery may lose power more quickly The camera is losing battery power quickly

Delete unnecessary files or insert a new card. Format the memory card. The memory card is defective. Get a new memory card. Make sure that the camera is switched on. Replace the batteries. Make sure that the battery is inserted correctly.

in low temperatures (below 0 °C/32 °F). Keep the battery warm by putting it into your pocket. • Using the flash or recording videos depletes the battery quickly.

Remove the battery and insert it again. While you use the camera, it may heat up. This is normal and should not affect your camera’s lifespan or performance.
• The flash option may be set to Off.

The flash does not work

(p. 52)

• You cannot use the flash in some modes.

Appendixes 107

Before contacting a service center

Situation The flash fires unexpectedly The date and time are incorrect The display or buttons do not work The camera display responds poorly

Suggested remedies

Situation

Suggested remedies • Make sure that the focus option you set

The flash may fire due to static electricity. The camera is not malfunctioning. Set the date and time in the display settings. (p. 95) Remove the battery, and then insert it again. If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor. For better performance of your camera screen, use your camera in moderate temperatures.
• Turn off your camera, and then turn it The photo is blurry

is suitable for close-up shots. (p. 55) clean the lens. (p. 100) of the flash. (p. 110)

• Make sure that the lens is clean. If not, • Make sure that the subject is within range

An incorrect White Balance can create The colors in the photo unrealistic color. Select the proper White do not match the actual Balance option to suit the light source. scene (p. 64)
The photo is too bright

on again.

The memory card has an error

• Remove your memory card, and then

insert it again.

Your photo is overexposed. • Turn off the flash. (p. 52) • Adjust the ISO sensitivity. (p. 54) • Adjust the exposure value. (p. 62) Your photo is underexposed. • Turn on the flash. (p. 52) • Adjust the ISO sensitivity. (p. 54) • Adjust the exposure value. (p. 62)

• Format your memory card.

See “Cautions when using memory cards” for more detail. (p. 104) If you change the name of a file, your camera may not play the file (the name of the file should meet the DCF standard). If you encounter this situation, play back the files on your computer.

The photo is too dark

Cannot play back files

Appendixes 108

Before contacting a service center

Situation The TV does not display your photos

Suggested remedies • Make sure that the camera is correctly • Make sure that your memory card

Situation

Suggested remedies • End Intelli-studio and restart the program. • You cannot use Intelli-studio on

connected to the TV with the A/V cable. contains photos.

Macintosh computers.

• Make sure that PC Software is set to Intelli-studio is not functioning properly

• Make sure that the USB cable is Your computer does not recognize your camera

On in the settings menu. (p. 95)

connected correctly. • Make sure that your camera is switched on. • Make sure that you are using a supported operating system. The file transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again. Videos may not play on some video player programs. To play video files captured with your camera, install and use the Intelli-studio program on your computer. (p. 86)

• Depending on your computer's

Your computer disconnects the camera while transferring files Your computer cannot play videos

specifications and environment, the program may not launch automatically. In this case, click Start → All Programs → SAMSUNG → Intelli-studio → Intelli-studio on your computer.

Your TV or computer cannot display photos and videos that are stored on an SDXC memory card.

SDXC memory cards use the exFAT file system. Ensure that the external device is compatible with the exFAT file system before connecting the camera to the device. SDXC memory cards use the exFAT file

system. To use SDXC memory cards on Your computer does not recognize an SDXC a Windows XP computer, download and memory card. update the exFAT file system driver from the Microsoft website.

Appendixes 109

Camera specifications
Image sensor
Wide (W) Tele (T) 350 cm-infinity 200-350 cm 200 cm-infinity -

Type Effective pixels Total pixels
Lens

1/2.3" (Approximately 7.76 mm) CCD Approximately 16.2 mega-pixels Approximately 16.4 mega-pixels SAMSUNG 26x Zoom Lens f = 4.0-104.0 mm (35mm film equivalent: 22.3-580 mm) F3.1 (W)-F5.9 (T)
• Still image mode: 1.0–26.0X

Normal (AF) Macro

80 cm-infinity 10-80 cm 10 cm-infinity 1-10 cm (Only zoom level 9)

Range

Auto Macro Super Macro

Focal length F-stop range

Shutter speed • Auto: 1/8-1/2,000 sec. • Program: 1-1/2,000 sec. • Night: 8-1/2,000 sec. Exposure

Zoom

(Optical zoom X Digital zoom: 130.0X, Optical zoom X Intelli zoom: 52.0X) • Playback mode: 1.0–14.4X (depending on image size) TFT LCD 3.0" (7.62 cm) 230K TTL auto focus (Center AF, Multi AF, Selection AF, Tracking AF, Face Detection AF)

Control Metering Compensation ISO equivalent
Flash

Program AE Multi, Spot, Center-weighted, Face Detection ±2EV (1/3 EV Step) Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200

Display

Type Feature
Focusing

Type

Mode Range Recharging time
Appendixes 110

Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix
• Wide: 80 cm–6 m (ISO Auto) • Tele: 2 m–4 m (ISO Auto)

Approximately 5 sec.

Camera specifications

Shake reduction

Shooting • Modes: Smart Auto (Portrait, Night Portrait,

DUAL IS [Optical Image Stabilization (OIS) + Digital Image Stabilization (DIS)]
Effect • Photo Filter (Smart Filter): Miniature, Vignetting,

Photo Shooting mode Video Shooting mode
White Balance

Cross Filter, Fish-eye, Old Film, Classic, Retro

• Image Adjust: Sharpness, Contrast, Saturation

Photos

Movie Filter (Smart Filter): Vignetting, Fish-eye, Classic, Retro, Palette Effect 1, Palette Effect 2, Palette Effect 3, Palette Effect 4

Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set, Color Temp.
Date Imprinting

Backlight Portrait, Night, Backlight, Landscape, White, Natural Green, Blue Sky, Sunset, Macro, Macro text, Macro Color, Tripod, Action), Program, Scene (Beauty Shot, Frame Guide, Night, Portrait, Children, Landscape, Close-up, Text, Sunset, Dawn, Backlight, Firework, Beach & Snow), Dual IS, Live Panorama, Magic Plus (3D Photo, Magic Frame, Split Shot, Picture in Picture, Photo Filter) • Burst: Single, Continuous, Motion Capture, AEB • Timer: Off, 10 Sec, 2 Sec, Double (10 Sec, 2 Sec)
• Modes: Movie, Magic Plus (Picture in Picture, Movie Filter) • Format: MP4 (H.264) (Max recording time: 20 min) • Size: 1280 X 720, 640 X 480, 320 X 240 • Frame Rate: 30FPS, 15FPS • Voice: On/Off/Zoom Mute • Video editing (embedded): Pause during recording

Date & Time, Date, Off

Videos

Appendixes 111

Camera specifications

Playback • Type: Single image, Thumbnails, Multi Slide

For 1 GB SD: Number of photos Show with Music and Effect, Movie clip, Smart Album* * Smart Album category: All, Date, File Type • Edit: Resize, Rotate, Image Adjust, Smart Filter, Crop • Effect: Image Adjust (Brightness, Contrast, Saturation, ACB, Face Retouch, Red-eye Fix), Smart Filter (Normal, Miniature, Vignetting, Cross Filter, Fish-eye, Old Film, Classic, Retro) Edit: Still image capture, Time trimming
• Internal memory: Approximately 52 MB • External memory (Optional):
Super Fine 4608 X 3456 4320 X 3240 4320 X 2880 3648 X 2736 4320 X 2432 159 177 204 234 234 300 457 737 956 1,465 Fine 240 282 300 343 343 457 639 911 1,272 1,727 Normal 355 384 417 505 505 599 832 1,123 1,585 1,897

Photos

Image size

2832 X 2832 2592 X 1944 1984 X 1488 1920 X 1080 1024 X 768

Videos
Storage

Media

SD card (up to 2 GB guaranteed), SDHC card (up to 32 GB guaranteed), SDXC card (up to 64 GB guaranteed) Internal memory capacity may not match these specifications.

These figures are measured under Samsung’s standard conditions. Your results may vary depending on the shooting conditions and camera settings.

• Still Image: JPEG (DCF), EXIF 2.21, DPOF 1.1

File format

• Movie Clip: MP4 (Video: MPEG-4.AVC/H.264,

Audio: AAC)

Appendixes 112

Camera specifications

Interface

Dimensions (W X H X D)

Digital output connector Audio input/ output Video output
Power source

USB 2.0 Internal speaker (Mono), Microphone (Mono)
• A/V: NTSC, PAL (selectable) • HDMI 1.4: NTSC, PAL (selectable)

114.48 x 79.26 x 86.45 mm (4.51 x 3.12 x 3.40 in.) (without protrusions)
Weight

403 g (14.22 oz.) (without battery and memory card)
Operating Temperature

0–40 °C (32-104 °F)
Operating Humidity

Battery Connector type

AA Alkaline Batteries Micro USB (5 pin)

5–85 %
Software

The power source may differ depending on your region.

Intelli-studio
Specifications may change without notice to improve performance.

Appendixes 113

Glossary
ACB (Auto Contrast Balance) This feature automatically improves the contrast of your images when the subject is backlit or when there is a high contrast between your subject and the background. AEB (Auto Exposure Bracket) This feature automatically captures several images at different exposures to help you capture a properly-exposed image. AF (Auto Focus) A system that automatically focuses the camera lens on the subject. Your camera uses the contrast to focus automatically. Aperture The aperture controls the amount of light that reaches the camera’s sensor. Camera shake (Blur) If the camera is moved while the shutter is open, the entire image may appear blurred. This occurs more often when the shutter speed is slow. Prevent camera shake by raising the sensitivity, using the flash, or using a faster shutter speed. Alternately, use a tripod, the DIS or OIS function to stabilize the camera. Composition Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition. DCF (Design rule for Camera File system) A specification to define a file format and file system for digital cameras created by the Japan Electronics and Information Technology Industries Association (JEITA). Depth of field The distance between the nearest and farthest points that can be acceptably focused in a photograph. Depth of field varies with lens aperture, focal length, and distance from the camera to the subject. Selecting a smaller aperture, for example, will increase the depth of field and blur the background of a composition. Digital zoom A feature that artificially increases the amount of zoom available with a zoom lens (Optical zoom). When using the Digital zoom, the image quality will deteriorate as the magnification increases.

Appendixes 114

Glossary
DPOF (Digital Print Order Format) A format for writing printing information, such as selected images and number of prints, on a memory card. DPOF-compatible printers, sometimes available at photo shops, can read the information from the card for convenient printing. EV (Exposure Value) All the combinations of the camera’s shutter speed and lens aperture that result in the same exposure. EV Compensation This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. Set the EV compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step brighter. Exif (Exchangeable Image File Format) A specification to define an image file format for digital cameras created by the Japan Electronic Industries Development Association (JEIDA). Exposure The amount of light allowed to reach the camera’s sensor. Exposure is controlled by a combination of the shutter speed, the aperture value, and ISO sensitivity. Flash A speed light that helps to create adequate exposure in low-light conditions. Focal length The distance from the middle of the lens to its focal point (in millimeters). Longer focal lengths result in narrower angles of view and the subject is magnified. Shorter focal lengths result in wider angles of view. Histogram A graphical representation of the brightness of an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. High points at the left (too dark) and right (too bright) on the histogram indicate a photo that is improperly exposed.

Appendixes 115

Glossary
H.264/MPEG-4 A high-compression video format established by international standard organizations ISO-IEC and ITU-T and developed by the Joint Video Team (JVT). This codec is capable of providing good video quality at low bit rates. Image sensor The physical part of a digital camera that contains a photosite for each pixel in the image. Each photosite records the brightness of the light that strikes it during an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS (Complementary Metal Oxide Semiconductor). ISO sensitivity The sensitivity of the camera to light, based on the equivalent film speed used in a film camera. At higher ISO sensitivity settings, the camera uses a higher shutter speed, which can reduce blur caused by camera shake and low light. However, images with high sensitivity are more susceptible to noise. JPEG (Joint Photographic Experts Group) A lossy method of compression for digital images. JPEG images are compressed to reduce their overall file size with minimal deterioration of the image resolution. lCD (liquid Crystal Display) A visual display commonly used in consumer electronics. This display needs a separate backlight, such as CCFL or LED, to reproduce colors. Macro This feature allows you to capture close-up photos of very small objects. When using the macro feature, the camera can maintain a sharp focus on small objects at a near life-size ratio (1:1). Metering The metering refers to the way in which the camera measures the quantity of light to set the exposure. MJPEG (Motion JPEG) A video format which is compressed as a JPEG image. Noise Misinterpreted pixels in a digital image that may appear as misplaced or random, bright pixels. Noise usually occurs when photos are shot with a high sensitivity or when a sensitivity is automatically set in a dark place.

Appendixes 116

Glossary
OIS (Optical Image Stabilization) This feature compensates in real-time for shaking and vibrating while shooting. There is no image degradation compared to Digital Image Stabilization feature. Optical zoom This is a general zoom which can enlarge images with a lens and does not deteriorate quality of images. Quality An expression of the rate of compression used in a digital image. Higher quality images have a lower rate of compression, which usually results in a larger file size. Resolution The number of pixels present in a digital image. High resolution images contain more pixels and typically show more detail than low resolution images. Shutter speed Shutter speed refers to the amount of time it takes to open and close the shutter, and it is an important factor in the brightness of a photo, as it controls the amount of light which passes through the aperture before it reaches the image sensor. A fast shutter speed allows less time to let light in and the photo becomes darker and more easily freezes subjects in motion. Vignetting A reduction of an image’s brightness or saturation at the periphery (outer edges) compared to the center of the image. Vignetting can draw interest to subjects positioned in the center of an image. White balance (color balance) An adjustment of the intensities of colors (typically the primary colors red, green, and blue), in an image. The goal of adjusting the white balance, or color balance, is to correctly render the colors in an image.

Appendixes 117

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

This Class [B] digital apparatus complies with Canadian ICES-003. PlanetFirst represents Samsung Electronics' commitment to sustainable development and social responsibility through eco-driven business and management activities. Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799

Appendixes 118

FCC notice
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorientate, or relocate, the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
• Declaration of Conformity

Trade Name Model No. Responsible Party Address Telephone No. :

: Samsung Electronics America, Inc. : Samsung WB100/WB101 : Samsung Electronics America, Inc. : 85 Challenger Road, Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Appendixes 119

Index
A
AF-assist light
Location 12 Settings 96

Brightness
Playback mode 80 Shooting mode 62

D
Date/Time Set 95 Deleting files 72 Digital Print Order Format (DOF) 81 Digital zoom 26 Disconnecting the camera 89

F
Face Detection 59 Flash
Auto 53 Fill in 53 Off 53 Red-eye 53 Red-eye Fix 53 Slow Sync 53

Burst modes
Auto Exposure Bracket (AEB) 66 Continuous 66 Motion Capture 66

AF Lamp 96 AF Sound 93 Anynet+ (HDMI-CEC) 94 Auto Contrast Balance (ACB)
Playback mode 80 Shooting mode 63

C
Camera specifications 110 Capturing an image from video 77 Cleaning
Camera body 100 Display 100 Lens 100

Display Brightness 94 Display type 23 DUAL IS mode 38

Focus area
Center AF 58 Multi AF 58 Selection AF 58 Tracking AF 58

Auto Display Off 94 A/V port 12

E
Editing a photo 78 Editing videos
Capturing 77 Trimming 77

Formatting 97 Frame Guide 36 Function button 14

B
Battery
Caution 105 Inserting 16

Connecting to a computer
Mac 90 Windows 85

Beauty Shot mode 35 Blink Detection 61

Enlarging 74 Error messages 99

G
Guide Line 93

Contrast
Playback mode 80 Shooting mode 67

Appendixes 120

Index

H
Half-press shutter 29 HDMI Size 95 HDTV 83

Intelli-studio 86 Intelli zoom 27 ISO sensitivity 54

Memory card
Caution 104 Insert 16

Program mode 37 Protecting files 72

Menu button 14 Metering
Center-weighted 63 Multi 63 Spot 63

Q
Quick View 94

L
Language settings 95 Live Panorama mode 39

I
Icons
Playback mode 69 Shooting mode 20

R
REC button 12 Red-eye
Playback mode 81 Shooting mode 52

Mode dial 14 Movie mode 46

M
Macro
Auto Macro 56 Macro 56 Super Macro 56

Image Adjustment
ACB 80 Brightness Contrast
Playback mode 80 Shooting mode 62 Playback mode 80 Shooting mode 67

O
Optical Image Stabilization (OIS) 28 Optional accessories 11

Reset 97 Resolution
Playback mode 78 Shooting mode 49

Magic Frame mode 41 Magic Plus mode
3D Photo 41 Magic Frame 41 Movie Filter 45 Photo Filter 44 Picture-in-Picture 42 Split Shot 42

Red-eye 81 Saturation

P
Playback button 14 Playback mode 69 POWER button 12

Retouching faces
Playback mode 81 Shooting mode 35

Playback mode 80 Shooting mode 67

Sharpness 67

Rotating 78

Image quality 50 Imprint 96

Appendixes 121

Index

S
Saturation
Playback mode 80 Shooting mode 67

Smart Filter
Playback mode 79 Shooting mode 44

U
Unpacking 11 USB port 12

Z
Zoom
Using the zoom 26 Zoom button 13

Smile shot 60 Sound settings 24 Start Image 93 Status lamp 13

Scene mode 34 Self portrait 60 Service center 107 Settings 92 Sharpness 67 Shooting portraits
Beauty Shot mode 35 Blink Detection 61 Face Detection 59 Red-eye 53 Red-eye Fix 53 Self portrait 60 Smile shot 60

V
Video
Playback mode 76 Shooting mode 46

3
3D Photo mode 41 3D TV 84

T
Thumbnails 71 Timer
Shooting mode 51 Timer lamp 12

Video Out 94 Viewing files
3D TV 84 HDTV 83 Panoramic photos 75 Slide show 75 Smart Album 70 Thumbnails 71 TV 82

Time settings 18 Time Type 95 Time zone settings 18, 95 Transferring files
Mac 90 Windows 85

Shutter button 12 Slide show 75 Smart Album 70 Smart Auto mode 32

W
White Balance 64

Tripod mount 13

Appendixes 122

Please refer to the warranty that came with your product or visit our website, www.samsung.com, for after-sales service or inquiries.

Similar Documents

Premium Essay

Samsung

...company headquartered in Samsung Town, Seoul. It comprises numerous subsidiaries and affiliated businesses, most of them united under the Samsung brand, and is the largest South Korean chaebol . Samsung was founded by Lee Byung-chul in 1938 as a trading company. Over the next three decades, the group diversified into areas including food processing, textiles, insurance, securities and retail. Samsung entered the electronics industry in the late 1960s and the construction and shipbuilding industries in the mid-1970s; these areas would drive its subsequent growth. Following Lee's death in 1987, Samsung was separated into four business groups – Samsung Group, Shinsegae Group, CJ Group and Hansol Group. Since 1990s, Samsung has increasingly globalized its activities, and electronics, particularly mobile phones and semiconductors, have become its most important source of income. Notable Samsung industrial subsidiaries include Samsung Electronics, Samsung Heavy Industries, and Samsung Engineering and Samsung C&T . Other notable subsidiaries include Samsung Life Insurance, Samsung Everland, Samsung Techwin and Cheil Worldwide . Samsung has a powerful influence on South Korea's economic development, politics, media and culture, and has been a major driving force behind the "Miracle on the Han River". Its affiliate companies produce around a fifth of South Korea's total exports. Samsung's revenue was equal to 17% of South Korea's $1,082 billion GDP. In 2013, Samsung began construction on...

Words: 2549 - Pages: 11

Premium Essay

Samsung

...| Samsung Electronics | | | | James BerryStrategic Management 4700 7/14/14 | | Samsung Electronics | | | | James BerryStrategic Management 4700 7/14/14 | SAMSUNG ELECTRONICS I. General Environment A. Economic Environment In 2012 net sales were $201,104 billion with a gross profit of $74,452 billion. The economy has been declining over the years. Samsung should reduce its expenses every year to keep being profitable. Samsung need to supply it components to less competitors. B. Demographic Environment Samsung Electronic has increased its employees because of the new production plants in China. Samsung need to look into reducing its manufacturing cost because the economy is not getting any better. China is known for cheaper labor. Samsung need to find a way to decrease employees in the manufacture or machinery cost. C. Social and Cultural Environment Samsung Electronic is well known worldwide. Samsung products are made for all ages to use. Samsung need to make sure that its products are attractive to all generations. Many of the older generation are happy with the older products. Older generation find the newer phones hard to use. Samsung need to make its newer product more user friendly for all ages. D. Political and Legal Environment Samsung need to work with big competitors to help them go through fewer layers of bureaucracy, taxes and the exchange rates. Samsung need to make sure its Patents are registered. Apple suing Samsung is causing...

Words: 1287 - Pages: 6

Free Essay

Samsung

...SAMSUNG ELECTRONICS 1) What is the case about? By investing in the DRAM production in the 80´s, the Samsung Company managed to turn Samsung Electronics group into its main source of revenue. The company developed a very specific strategy: * Investment in production process in order to increase productivity : the main goal being to produce more quickly with less mistakes * Leading in frontier product : always be the leader in technology * Quality control : always focus on the quality of the products * Human resources : stimulating environment by a meritocratic system based on incentive programs In 2005, the arrival of firms companies in the memory chip market is threatening Samsung´s leadership. More specifically, the global memory industry is a sector with a little number of powerful suppliers and various price-conscious customers. Like Samsung in the 80´s, new Chinese companies are creating a fierce competition, willing to sacrifice profits in order to get market share. Those companies got industry experience by creating leadership and managed to build high value facilities by raising international financing. In spite of the American and Taiwanese´s blockade, the government created incentive for other foreign countries by creating an attractive environment. Samsung decided to create partnerships with Chinese companies but this implies two main risks: * The fact that intellectual propriety is not being well-protected * The fact that by moving its...

Words: 1846 - Pages: 8

Free Essay

Samsung

...BY VARUN MALHOTRA SEC-H 11BSPHH010930 PROJECT ON PLACE & PROMOTION, C.S.R, SOCIAL MEDIA OF Place Strategy of Samsung The place strategy of Samsung is of three types: * It follows intensive distribution. * It follows selective distribution. * It follows exclusive distribution. The place strategy also includes * 24 state level distribution offices * Direct Dealer interface * Regional dispatch centers(RDC) Distribution System * One level channel * Two level channel * Shop-in-shop * Exclusive Showrooms * Sales and Service network all-over the India. Distribution Network Original equipment manufacturer/vendor or supplier  Factory Regional Distributing Centre Direct Dealer Branch Warehouse Modern retail/ Exclusive stores & Samsung digital plazas Distributor Sub- Dealer Consumer/ Customer In India, apart from a lot of multi brand outlets, Samsung has a lot of flagship stores- which sell a wide range of Samsung products from mobile handsets, kitchen appliances to televisions. In this context it’s interesting to see Samsung explore all the more new avenues like opening a Smartphone Café. Promotion Strategy * Sales Promotion The main objective of sales promotion is to induce new customers to purchase as well as to keep attracting existing customers by providing special incentives to them. Offering discounts coupons displays and demonstration would help in increasing...

Words: 1113 - Pages: 5

Premium Essay

Samsung

...Samsung Electronics Contents Overview Business Units Corporate Vision Performance Indicators Brand Excellence Corporate Citizenship 2 Overview 3 History 1972 Production of B/W TV sets began 1992 Company ranked world’s top DRAM supplier 1969 Company established 1980 Korea TelecommunicationsCorp. acquired 1995 TFT-LCD mass production began 1974 Wafer fabrication started 1988 Samsung Semiconductor & Telecommunications merged with Samsung Electronics Co. 1994 256Mb DRAM developed 1996 CDMA cellular services commercialized 1995 - 2009 SAMSUNG. All rights reserved. | 4 History 2004  S-LCD Corp., LCD joint venture with Sony established  World’s 1st to develop and demonstrate Mobile WiMAX 2003 Company became leader in flash memory 2006  World’s 1st Blu-ray Player launched  Provides world’s 1st Solid State Drive for PC applications 2009  Reorganized into stand-alone business units 1997 Worldwide Olympic Partner contract signed 1999  World’s 1st to offer full line-up of digital TVs  Developed watch phone, MP3 phone and TV phone 2005  World’s 1st Satellite and Terrestrial DMB terminals launched  World’s 1st 102”PDP TV, 82”LCD TV, and 71” DLP™ TV developed 2010 ~ 2011  Acquired Samsung Digital Imaging Co.  Announced investment in medical devices business 1995 - 2009 SAMSUNG. All rights reserved. | 5 Global Network 68 Countries January 2011 Manufacturing Subsidiaries Sales...

Words: 5167 - Pages: 21

Free Essay

Samsung

...I. SIEGEL JAMES JINHO CHANG Samsung Electronics Introduction Kun Hee Lee, chairman of the Samsung Group, contemplated his company’s strategy while sitting in the basement office of his home. His office had a one hundred-inch screen on the wall, and in front of the screen there was a short desk, just one foot in height. Lee spent much of his day in this room, studying the strategies of his competitors and overseeing multibillion-dollar investment decisions. Beside his desk were hundreds of DVDs and videos, many examining his competitors’ histories and strategies. Every new product made by Samsung and its competitors sat along the walls. Trained as an engineer, Lee eagerly picked apart every product, examining its design and quality of manufacturing.1 As he sat next to his low desk and sipped a cup of Korean green tea, Lee wondered whether his legion of Samsung employees was following his stern advice to always demand superiority in product design and process efficiency. He had grave concerns about complacency in his company. He remembered how he mentioned in a senior management meeting: “To an outsider, reprimanding a manager whose division racked up [billions of dollars] in profit might seem bizarre. But I don’t see it that way. Our abilities and efforts did play a role in our success, but we must realize that most of it came from the leading companies’ negligence, pure luck, and our predecessors’ sacrifice.”2 Under Lee’s leadership, Samsung had risen to become the world’s...

Words: 12199 - Pages: 49

Free Essay

Samsung

...Profile Samsung Electronics Company, a main subsidiary of the Samsung Group, is considered one of the worldwide leading consumer electronics brands. Samsung Electronics’ head office is located in Seoul, South Korea. It operates in the Americas, Europe and Asia. The company manufactures and distributes consumer electronics, communication products, semiconductor products and home appliances. Its major products include home appliances, mobile devices, printers, LCD monitors and semiconductors (Datamonitor, 2011). Samsung’s sales revenue consistently increased from 121,294 billion won ($108 billion USD) in 2008 to 154,630 billion won ($138 billion USD) in 2010, and its net profit nearly tripled during the same period, from 5,526 billion won ($4.95 billion USD) to 16,147 billion won ($14.36 billion USD). As related to geography, in 2010, America accounted for 28% of the company’s turnover, followed by Europe (23%), Korea (17%), Asia (16%) and China (16%). Although the company’s largest market in sales changed from Europe to America during the period from 2008 to 2010, the overall sales revenue in each area increased during the same period (Samsung Electronics Company website, 2012). In the third quarter of 2011, Samsung Electronics accounted for 15.5% of the global monitor market share, followed by Dell, Inc. (12.5%) (Koreaherald, 2011). Other key competitors in the semiconductor industry are Hynix Semiconductor Inc. and Intel Corporation. In addition, Apple Inc. is by far the...

Words: 1112 - Pages: 5

Free Essay

Samsung

...Welcome to the Samsung Global Strategy Group I. Samsung Overview II. Introduction to the Global Strategy Group (GSG) III. GSG & You IV. Korea & Seoul I. Samsung Overview I. Samsung Overview (Revenue & Global Presence) Fast growth and vast global footprint Samsung Group Revenue ※ Billion US Dollars Global Operations 318   369,000 employees worldwide 510 offices and facilities in 79 countries 141 87 226 Electronics 80 Samsung 22 1997 2005 2012 4 I. Samsung Overview (Leading Products) 5 I. Samsung Overview (Leading Products) 6 I. Samsung Overview (Brand Value) Samsung ranked 9th among global companies in 2012 7 I. Samsung Overview (Total 29 Affiliates Companies) The Samsung Group consists of many different business units Electronics Industry Electronics Engineering & Heavy Industry C&T Corporation Engineering Financial Services Life Insurance Fire & Marine Insurance Samsung Card Securities Asset Management Venture Investment Chemical Cheil Industries Inc. Petrochemical Fine Chemicals BP Chemicals Total Other Companies Cheil Worldwide Everland Inc. The Shilla Hotels & Resorts Economics Research Institute S1 Corporation Medical Center BioLogics SDS Heavy Industries Electro-Mechanics Techwin SDI Display Corning Precision Glass Bioeps 7 Affiliates 3 Affiliates 6 Affiliates 5 Affiliates 8 Affiliates 8 I. Samsung Overview (SEC Biz. Division) HME : Health Medical...

Words: 5322 - Pages: 22

Free Essay

Samsung

...SAMSUNG Company’s Profile Samsung Group is a South Korean multinationalconglomerate company headquartered in Samsung Town, Seoul. It comprises numerous subsidiaries and affiliated businesses, most of them united under the Samsung brand. On March 1, 1938, founding chairman Byung-Chull Lee started a business in Taegu, Korea, with 30,000 won. At the start, his business focused primarily on trade export, selling dried Korean fish, vegetables, and fruit to Manchuria and Beijing. Over the next three decades the group diversified into areas including food processing, textiles, insurance, securities and retail. Samsung entered the electronics industry in the late 1960s and the construction and shipbuilding industries in the mid-1970s; these areas would drive its subsequent growth. Following Lee's death in 1987, Samsung was separated into four business groups – Samsung Group, Shinsegae Group, CJ Group and Hansol Group. Samsung Electronics Co., Ltd. is mainly engaged in the production of consumer electronic products. It operates in three business divisions: consumer electronics (CE) division, which involves in the color televisions (CTVs), monitors, printers, air conditioners, refrigerators, laundry machines and others; information technology & mobile communications (IM) division, which involves in the production of computers, handhold phones (HHPs), network systems, digital cameras and others, as well as device solutions (DM) division, which is divided into semiconductor and...

Words: 2045 - Pages: 9

Premium Essay

Samsung

...Background and history of firm The Samsung Company is a South Korean based on large business that involves a number of subsidiaries. Samsung was established in 1938 by Lee ByungChul who is the first president in this business. He started a regional food exporting company in Taegu, Korea. After surviving the Japanese Occupation, World War II, and the North Korean invasion (seriously, are they planning on doing a movie any time soon?), Byung-Chull started anew in a sugar refinery outside Busan, South Korea. he would expand his business into a wide range of enterprises, moving into businesses such as insurance, securities, and retail, with Byung-Chull signalizing industrialization as the course to growth. This company is one of the largest companies in the world. Their main focus is in electronics, massive industry, and many other else and then their competitors are Apple and LG. However, consumers support their merchandises and services rather than these businesses Samsung was originally started small company as a grocery, but over time, this company is gradually grew up a big company in society when Lee GunHee became a leader in this business. Moreover, they always try to exploit future things which are models of galaxy. When Apple was rolled out I-phone, it’s like this company start to triumph competition against the Samsung, so this business is more focus on product which is a new way of smart Phone. As a result, they start to win competition against other companies. However...

Words: 1690 - Pages: 7

Premium Essay

Samsung

...Introduction: Samsung Electronics is a multionaltional electronic group located in Sowon, South Korea, and is one of the largest electronic groups in Asia. Samsung was created in 1969, as a division of the mammoth Korea cheabol Samsung Group established by Byung-Chull Lead in 1938. It was established as a means of getting Samsung to grow into the television and consumer electronics industry. The first product that was made by the division was a balck and white television that was created and began selling in early 1970. From then on Samsung Electronics gradually developed a diverse lineof consumer electronics that was sold domestically and, later begain its exports. The company also began branching our to into color television and, laterinot a verity of consumer electronics and appliances. By the 1980s Samsung begain to expand its product line by brancing out into color television and various house hold appliances. The company operates within four major divisions including Digital Media, Semiconductors, Information and Communications, and Home Appliances. Product and services: Samsung operates under four divisions including digital media, semiconductors, information and communication, and home appliances. Channels of distribution: Samsung uses many different distribution channels to deliver their products to consumers. These products are delivered via the retail setting, and include electronics, chemicals, and engineering services. Promotional efforts: Money...

Words: 276 - Pages: 2

Premium Essay

Samsung

...Introduction Samsung is a company which is known as a global multinational dealing with the manufacturing and promotion of the White Goods. In other words, it is a global supplier of appliances and gadgets used by potential consumers all around the world. The company has accomplished this wider business through powerful and strengthening strategies which helped them in gripping their products on the grounds. This assignment is based on the evaluation of the strategic direction of this company and so the culture is taken into consideration. This also provides the complete structure of the hierarchy structure of this organization.1 Background and History The history of this company starts with its opening as a general store in 1938 at North Kyung-sang Province, Korea. In these stores, trade was undergone until 1950s when the company started working as sugar and wool producer. The company was involved in the insurance business in 1958. The 1960s is taken as the era when this company became the first globally expanding company in Korea.2 This era was also an adoption period for the company when the communication sector joined with it. The operations for shaping the future planning of the communication sector was started in 1970s and in 1980s the company managed to access the global market for these products. In the 20th century it was a final stage of development of this sector n till 2000 the operations and management was properly maintained. In the recent era...

Words: 1399 - Pages: 6

Premium Essay

Samsung

...Samsung Group (Hangul: 삼성그룹; Hanja: 三星그룹; Korean pronunciation: [sam.sʌŋ ɡɯ'ɾup̚]) is a South Korean multinational conglomerate company headquartered in Samsung Town, Seoul. It comprises numerous subsidiaries and affiliated businesses, most of them united under the Samsung brand, and is the largest South Korean chaebol. Samsung was founded by Lee Byung-chul in 1938 as a trading company. Over the next three decades the group diversified into areas including food processing, textiles, insurance, securities and retail. Samsung entered the electronics industry in the late 1960s and the construction and shipbuilding industries in the mid-1970s; these areas would drive its subsequent growth. Following Lee's death in 1987, Samsung was separated into four business groups – Samsung Group, Shinsegae Group, CJ Group and Hansol Group. Since the 1990s Samsung has increasingly globalised its activities, and electronics, particularly mobile phones and semiconductors, has become its most important source of income. Notable Samsung industrial subsidiaries include Samsung Electronics (the world's largest information technology company measured by 2012 revenues),[2] Samsung Heavy Industries (the world's second-largest shipbuilder measured by 2010 revenues),[3] and Samsung Engineering and Samsung C&T (respectively the world's 15th- and 63nd-largest construction companies).[4] Other notable subsidiaries include Samsung Life Insurance (the world's 14th-largest life insurance company),[5] Samsung...

Words: 1850 - Pages: 8

Premium Essay

Samsung

...1.0 Introduction Samsung is a company that has been dominating its industry for some time now and continues to grow. This report will provide an overview of Samsung along with a focus on the company mobile market. The intention of this report is to develop ones analytical and problem solving skills in marketing. One will learn the organizational structure and value chain of Samsung. In addition, one will be able to view Samsung's strengths and weaknesses compared to its competitors. Also we will look at the market segmentation in which Samsung target market will be critiqued. Last but not least one will view the marketing mix and provide feedback on how Samsung can improve its positioning, product, pricing and promotions strategies. By combining all of this information, one will learn how to make their own marketing plan as well as have the capability to help develop Samsung Company. 2.0 Background Samsung is one of the top companies in the electronics industry; however Samsung did not start business as an electronic company. In fact Samsung was founded by a South Korean named Lee Byung-Chull in 1938 as a trading business. The Korean based business went on to expand in areas such as food processing, textiles, insurance, securities, and retail with in a thirty year span. It was not until 1968 in which Samsung became an electronic company. In 1968 Samsung-Sanyo Electronics was created but was later renamed Samsung Electro-Mechanics in 1975; two years later they would merge...

Words: 2699 - Pages: 11

Premium Essay

Samsung

...Recommendation Project: Samsung Group and Samsung Electronics MBA6004 Foundational Skills for Business Leaders Abstract This paper analyzes how Samsung can continue to maintain a competitive advantage over its competitors by incorporating social networking sites such as Instagram, Twitter, Pinterest, and Vine into its social media strategy. Samsung has a long track record of excellence and continues to be a powerful and reliable brand to millions of users. Presently, Samsung is marketing primarily through YouTube and television ads. Yet, with the rapid changes in technology, Samsung’s use of Instagram, Twitter and other social networking sites can allow the business to take its brand to significant levels. Taking advantage of multiple social networking sites can not only help Samsung maintain a competitive edge, it will allow the company to maximize its business and foster real brand advocates and loyal customers. With the undeniable popularity and rapid expansion of Instagram, Twitter and other social media sites, the benefits would be significantly worth Samsung using these platforms as a part of its social media strategy. The History of Samsung Samsung is a multi-million dollar technology company founded by Lee Byung-chul as a trading company in 1938 which sells everything from televisions to cell phones, to appliances and other commodity products. Samsung first made its way in...

Words: 1901 - Pages: 8