vessels. It aligns with the AMSA approved course: SC002 ? Fire Prevention and Firefighting. | Unit Sector | Operational Quality and Safety | Pre-Requisites | The unit may be assessed in conjunction with other units that relate to the functions of the occupation(s) concerned. | Performance Criteria | 1 Carry out fire minimisation procedures 1.1 Fire hazards on board vessel are identified and action is taken to eliminate or minimise them 1.2 Responsibilities for checking fire prevention equipment
Words: 2621 - Pages: 11
tape. Next, check inside the home’s electrical panel for a tripped breaker. There are numerous causes for a breaker tripping, including surges from the power company or a problem with your home’s wiring, and other potential causes. If a circuit breaker has tripped, turn it back on and check for power at the malfunctioning outlets and/or switches. If turning the breaker back on results in its tripping again, unplug any appliance or electronics or other electrical device on the
Words: 712 - Pages: 3
HEALTH AND SAFETY PROGRAM DECEMBER 2011 OCCUPATIONAL HEALTH AND SAFETY POLICY 1.0 Purpose 2.1 Setwright of Maine, Inc. is committed to providing a safe, accident-free, and healthy work environment for everyone. 2.2 Safety demands cooperation on everyone's part. 2.3 Communication be kept open at all times between the management and employees. 2.4 Workers who notice hazards or other safety problems, or feel that they
Words: 2928 - Pages: 12
Unit 27-Understanding Health and Safety in the Business Workplace P1 Health and Safety at Work Act 1974 The health and safety at work act is a legislation that covers health and safety in the UK. The health and safety executive is responsible for enforcing this law relevant to the working environment. The health and safety act protects health and safety for workers if there were any injuries to a worker when they are at work then they is protected by this law. BAM Construction Site In a BAM
Words: 2422 - Pages: 10
The principal particle of the WHS Act is to arrange everything and ensure that it is 'in safety' for employees and workplace to decrease the number of dangerous. To build it be impartial and capable delegation containing advance to employer. Supporting coaching course or development of knowledge for employees and also equip them a recommendation or valuable information to the workers. The operation of Safe Work - Qualifying of the substantials connection to WHS and, if it valuable, change the material
Words: 797 - Pages: 4
Plantations Hazards The term plantation is widely used to describe large-scale units where industrial methods are applied to certain agricultural enterprises. These enterprises are found primarily in the tropical regions of Asia, Africa and Central and South America, but they are also found in certain subtropical areas where the climate and soil are suitable for the growth of tropical fruits and vegetation. Plantations are grown on a large scale because the crop is grown for commercial purposes
Words: 1797 - Pages: 8
o Practicing occupational health and safety procedures 18-22 • Common Competencies 23 o Applying quality standards …………………………………… 24-27 o Performing computer operations 28-34 o Performing mensuration and calculation 35-38 o Preparing and interpreting technical drawing 39-42 o Using hand tools 43-47 o Terminating and connecting electrical
Words: 8633 - Pages: 35
|Applicable Legislation |Standards and Codes of Practice | |Work Health & Safety Act 2011 | |
Words: 793 - Pages: 4
procedures and programs to meet legislative requirements Assessment Task 2: Work Health and Safety Project Part A: Develop handouts Handout 1: Legislation Explain the purpose of Work Health and Safety legislation, including the function of a WHS Act, WHSregulation and WHS Code of Practice: Purpose of WHS legislation The principalparticle of the WHS Act is to arrange everything and ensure that it is 'in safety' for employees and workplace to decrease the number of dangerous. To build it be impartial
Words: 1699 - Pages: 7
o Participating in workplace communication ………………… 7-10 o Working in a team environment ……………….... 11-13 o Practicing career professionalism .……………. 14-17 o Practicing occupational health and safety procedures 18-22 • Common Competencies 23 o Applying quality standards …………………………………… 24-27 o Performing computer operations 28-34 o Performing mensuration and calculation 35-38
Words: 8634 - Pages: 35
