do our own school work to graduate. Digital devices store data The digital device stores data on either media such as CD’s or DVD’s through a burning software. The digital device such as flash drives or memory sticks store data a little differently. They use a device like a microchip or some other types of firmware to store the electrical data in a binary strip on the physical drive. Input and Output devices An input device is a device used to input data into the computer through either typing
Words: 314 - Pages: 2
do other complex tasks. Timers and counters are examples of ladder logic functions. They are more complex than basic inputs contacts and output coils and rely heavily upon data stored in the memory of the PLC. Lecture – PLC Programming Basics MME 486 – Fall 2006 4 of 62 Memory Map A memory map can be used to show how memory is organized in a PLC. § Input/output locations § Internal relay and timer/counter locations Data table User program The user program causes the controller
Words: 3166 - Pages: 13
Shawna Rockwell October 1, 2015 Unit 3 Assignment 1 NT1110 Input and Output Ports and Devices * Input and output devices: used to interact with computer. * I/O devices connect through I/O ports Types of I/O Ports * Serial Port: Transmit data at 1 bit at a time, male and has 9 or 25 pins * Parallel Ports: Transmit data at 8 bits, female and has 25 pins * Game Ports: Female, 15 pins in 2 rows * VGA Port: 15 Pin with three rows D type * DVI PORT: (Digital Visual
Words: 281 - Pages: 2
external capacitor. These encoders also have on-chip pull-up devices which permit switches with up to 50 kΩ on resistance to be used. No diodes in the switch array are needed to eliminate ghost switches. The internal debounce circuit needs only a single external capacitor and can be defeated by omitting the capacitor. A Data Available output goes to a high level when a valid keyboard entry has been made. The Data Available output returns to a low level when the entered key is released, even
Words: 2325 - Pages: 10
high-speed Silicon-gate CMOS device. It is a 4-to-16 line decoder/de-multiplexer with four bit binary weighted address inputs pins (A0 to A3). It also contains latches, an active LOW enable input (E) and a latch enable input (LE). The 16 outputs pins (Q0 to Q15) are mutually exclusive active HIGH logic. The selection of an output is done by the data on input An, this is after pulling the latch enable pin to logic HIGH. When Latch Enable is pulled LOW, the last data present at inputs are stored in the latches
Words: 723 - Pages: 3
electronic has come to stay as the most important branch of Engineering. Electronic devices are being used in almost all the industries for quality control and automation. They have become a fast replacement of present workers army which is engaged in processing and assembling of the factory. In this fact developing society, electronic has come to stay as the most important branch of Engineering. Electronic devices are being used in almost all the industries for quality control and automation. They
Words: 5909 - Pages: 24
Computers Computer - is an electronic device, operating under the control of instruction stored in its own memory, that can accept data, process the data according to specified rules, produce result, and store the result for future use. Data & Information Data- is a collection of unprocessed items, which can include text, numbers, images, audio, and video. Information- conveys meaning and is useful to people. Computer process data (Input) into information (output). Computer carries out processes
Words: 1694 - Pages: 7
Intro to Information Tech Chapter 2 Computers are data processing devices * Performs four major functions * Input: Gathers data, allows users to enter data * Process: Manipulates, calculates, or organizes data into information * Output: Displays data and information for user * Storage: Saves data and information for later use * Data: representation of a fact, figure, or idea * Information: data that has been organized or presented in a meaningful fashion
Words: 1125 - Pages: 5
Input Device Facts Common interfaces used for connecting input devices include: * 6-pin mini-DIN (PS/2 connector) for keyboard and mouse * USB for keyboard, mouse, and other devices * Infrared and wireless connections for keyboards, mouse, and other devices * DB-9 (serial) connector for specialized input devices The following table lists several considerations for selecting input devices. Device Type | Considerations | Keyboard | Keyboards typically connect through a PS/2
Words: 645 - Pages: 3
amp/comparator designed to operate a relay, lamp, or other load when the input frequency reaches or exceeds a selected rate. The tachometer uses a charge pump technique and offers frequency doubling for low ripple, full input protection in two versions (LM2907-8, LM2917-8) and its output swings to ground for a zero frequency input. The op amp/comparator is fully compatible with the tachometer and has a floating transistor as its output. This feature allows either a ground or supply referred load of up
Words: 2777 - Pages: 12
