Free Essay

Automotive Battery

In:

Submitted By AnneLovesJesus98
Words 267
Pages 2
An automotive battery is a type of rechargeable battery that supplies electric energy to an automobile.[1]

An automotive SLI battery (starting, lighting, ignition) is an automotive battery that powers the starter motor, the lights, and the ignition system of a vehicle's engine, mainly in combustion vehicles.

Automotive SLI batteries are usually lead-acid type, and are made of six galvanic cells connected in series to provide a nominally 12-volt system. Each cell provides 2.1 volts for a total of 12.6 volts at full charge. Heavy vehicles, such as highway trucks or tractors, often equipped with diesel engines, may have two batteries in series for a 24-volt system or may have series-parallel groups of batteries supplying 24V.

Lead-acid batteries are made up of plates of lead and separate plates of lead dioxide, which are submerged into an electrolyte solution of about 38% sulfuric acid and 62% water.[2] This causes a chemical reaction that releases electrons, allowing them to flow through conductors to produce electricity. As the battery discharges, the acid of the electrolyte reacts with the materials of the plates, changing their surface to lead sulfate. When the battery is recharged, the chemical reaction is reversed: the lead sulfate reforms into lead dioxide and lead with the sulfate returning to the electrolyte solution restoring the electrolyte specific gravity. With the plates restored to their original condition, the process may now be repeated.

Battery recycling of automotive batteries reduces the need for resources required for manufacture of new batteries, diverts toxic lead from landfills, and prevents risk of improper disposal.

Similar Documents

Free Essay

Case Study Focuses on Camera Company

...commercial success for the company. There was a potential market for that. Small and Startup Company so faced challenges. SMaL should make a decision for the future. SMaL had copycats who enter the market but with different technologies or different specifications or even higher specifications. Pixim with combining CMOS and CCD. Foveon had X3 high quality image. Casio Exilim Company in 2003 in size of back pocket with 300$. The company had camera with more bargain qualities than their competitors. Unique benefits of Camera are light weigh -0.2ounces- long battery life (500 to 1000images). Worked with different light condition, Leadership in using CMOS, with Fujifilm AXIA, Logitech and Oregon Scientific. In August 2001, they illustrated Ultra-WideW3000 with high resolution and capable to capture moving images. The company also had pretty good recognition worldwide and they even received few awards. Credit card size with thin Battery Camera...

Words: 1078 - Pages: 5

Free Essay

Production of Materials

...Chemistry Research Assignment Part A – The Production of Materials: 1. Use available evidence to gather and present data from secondary sources and analyse progress in the recent development and use of a named biopolymer. This analysis should name the specific enzyme(s) used or organism used to synthesise the material and an evaluation of the use or potential use of the polymer produced related to its properties. a) Name a biopolymer (eg. Biopol) outlining how it’s produced. Biopol: Made in the 1960s In an American company. This biopolymer is a PHA and is produced industrially by growing it in tanks with bacteria such as Alcaligenes eutrophus along with a carbon based food source. It is then isolated from the tank to be purified by various methods such as dissolving the PHB in trichloromethane and then removing all its waste to create Biopol. b) Construct a table, relating its uses/possible uses to its properties. Uses Properties related Act as a carrier for slowly releasing insecticides and herbicides and fertilizers Biodegradable – able to break down in the natural environment Use as containers for plastics as well as shampoo containers and cosmetics insoluble in water and relatively high tensile strength Medical applications Biocompatibility and biodegradable Non toxic c) Evaluate the importance of this biopolymer now and its potential for use in the future based on part b. Biopol is quite an important biopolymer as a future resource because firstly, there...

Words: 6532 - Pages: 27

Free Essay

Battery Industry

... According to Battery University, the global battery market is about $50 billion U.S. of which %5.5 billion is allocated to secondary batteries. Global primary and secondary battery markets are expected to grow due to industrialization, gross domestic product (GDP), and economic growth. Because of the recent economic slowdown, many nations have set recovery plans in place, which would increase the demand for batteries across the global market. Because of China and India’s GDP rates, they have a greater opportunity to have higher growth rates within the battery industry. With the assurgency of digital cameras, phones, portable entertainment devices, computing devices, electronic automobiles, along with the consumer’s ability to buy, the demand for secondary batteries is expect to outperform the primary battery as the world moves forward towards rechargeable devices. Therefore, any new company looking to get into the battery monitoring industry have their work cut out for them. They must come up with new and innovative products/services that will keep up with the ever changing technology. For example, simply inventing a prototype similar to other products within the industry won’t cut it. The company entering the market has to make sure that whatever product that they have must enhance the other products in the market or be something completely different than what has already been seen. The automotive industry also shows potential for secondary batteries as the industry...

Words: 412 - Pages: 2

Premium Essay

Competitive Strategies

...that offer similar products to consumers. Energizer has been around since 1986 and has grown into a mutli- billion dollar company within the last decade. Duracell first got started in the 1920’s from two scientists, and finally become a brand in 1964. This paper will discuss the two companies’ background, the competition between the two, and how they will thrive to compete in the market place in future. Energizer ​Energizer is formerly known as Eveready Battery Company and changes its name in the late 1980’s. By the 1990, Energizer has established their brand and had over 30 percent of the domestic market. They were trailing Duracell by 10 percent, who at that time had 40 percent of the domestic market. Energizer is the manufacturer of dry cell batteries and flashlights, with a full line production of in three major categories: alkaline, carbon zinc, miniature and rechargeable batteries. They produce more than six billion battery cells annually and has became a global leader in dynamic business of producing portable power in more than 160 countries. They may not have been around as long as Duracell, but has established the brand well in the marketplace. Duracell ​Duracell started with a partnership with inventor, Samuel Ruben...

Words: 965 - Pages: 4

Free Essay

Criminal Law

...weapon. I will explain what argument I will use and why I chose that argument. I will also explain why I didn’t chose the other argument. I will give you definitions of aggravated assault, aggravated battery, simple assault and simple battery. I would not chose argument number 2 Sharon should not be charged with aggravated assault and battery, but only simple assault and battery, since no deadly weapon was used. The reason I would chose this argument is because I would say the wine bottle was not a deadly weapon. I would research and see if there were cases that were similar to this case. I would prove that the wine bottle was not broken at the time of the event and that is why it was not a deadly weapon. Here is a case of a women hitting her husband with a wine bottle. Susan Van Cook, 42, of Trails End was charged with two misdemeanors (Leslie Korngold). I would not chose argument number 1 because it would be hard to prove by reasonable doubt that she did this because she was drunk. I am thinking that if you use argument number 1 you could also say she was afraid he was going to hit her first. I think that this argument would be too hard to prove. I could be wrong and this may be easier to prove then I think. Here are the definitions of aggravated assault and aggravated battery. aggravated assault n. the crime of physically attacking another person which results in serious bodily harm and/or is made with a deadly or dangerous weapon such as a gun, knife, sword, ax or blunt...

Words: 952 - Pages: 4

Free Essay

Vuongdinhtuan1306

...NATIONAL ECONOMICS UNIVERSITY BTEC HND BUSINESS & MANAGEMENT Assignment Cover Sheet NAME OF STUDENT REGISTRATION NO. UNIT TITLE ASSIGNMENT TITLE ASSIGNMENT NO NAME OF ASSESSOR SUBMISSION DEADLINE Working with and Leading People Hiring and Leading 1 of 2 (individual report) Mr. John Andre 7 October 2013 I, __________________________ hereby confirm that this assignment is my own work and not copied or plagiarized from any source. I have referenced the sources from which information is obtained by me for this assignment. ________________________________ Signature _________________________ Date WLP Assignment 1 1 Unit Outcomes Outcome Evidence for the criteria Feedback Assessor’s decision First attempt Internal Verification Re-work Be able to use recruitment, selection, and retention procedures Prepare documentation to select and recruit a new member of staff Assess the impact of legal, regulatory, and ethical considerations to the recruitment and selection process Take part in the selection process Evaluate own contribution to the selection process Explain the skills and attributes needed for leadership 1.1 1.2 LO1 1.3 1.4 2.1 Understand the styles and impact of leadership Explain the difference between leadership and management Compare leadership styles for different situations Explain ways to motivate staff to achieve objectives 2.2 2.3 LO2 2.4 Merit grades awarded Distinction grades awarded M1 D1 ...

Words: 1264 - Pages: 6

Free Essay

Surveillance

...Build Your Own Micro RC Surveillance Robot HOW DO YOU BUILD YOUR OWN MICRO RC SURVEILLANCE ROBOT? Why don't I show you how?   Almost every roboticist has wanted to create a small Surveillance Robot at some point in their time. The biggest problem being the Receiver/Transmitter pairs are always too expensive. My solution: Extract the RC receiver from a small RC car and modify it for our purposes. By the end of this tutorial, you will create and modify an RC robot to do: 1. Direct Radio Control using the remote's joysticks. 2. Computer control via a microcontroller connected to the remote.   Later, I plan on making this base teleoperational. When I do, I'll be sure to document it and continue the tutorial for it!!!!!!!!!!    It will used the receiver from a $10 ZipZaps RC car purchased at a RadioShack (US) or a Microz GT car purchased at The Source (Canada). Any inexpensive RC car, though, will do. It will also use a wireless camera and 2 Solarbotics gear motors.  The main goal of this robot always remains the same; to be able to perform surveillance that you could watch on your television or on your computer (this depends on the camera used). I broke this tutorial into steps for simplicity and organization of categories (why should you put the construction of chassis with building the electronics? :P) Now for some general examples of the design for the robot (you don't have to follow my example exactly). The image at the top of the page shows an angled view of...

Words: 5094 - Pages: 21

Premium Essay

Chemical Systems Project

... 8 8. BIBLIOGRAPHY 8 9. APPENDIX INTRODUCTION: A battery is an equipment or device that accumulates chemical energy and makes it accessible in electrical form. It is an integration of one or more voltaic cells, each of which is composed of two half cells connected in series by the conductive electrolyte. I have chosen to investigate and conduct my research project with two different cells namely-Duracell and Energizer .I have chosen these two because they’re the most popular and recommended cells globally .Duracell works for a maximum of 7 hours 12min and an Energizer cells maximum is 6 hours 42min when inserted into a AAA LED flashlight from Garrity . THE DURABILITY OF DURACELL & ENERGIZER CELLS: Duracell > Duracell battery can be recharged up to 400 times that enable cost reduction and power efficiency per battery. These batteries have greatly...

Words: 1236 - Pages: 5

Free Essay

Economics

...http://hubpages.com/hub/Laptop-vs-Tablet-for-Students http://compreviews.about.com/od/buyers/a/Tablets-vs-Laptops.htm http://www.lenovo.com/us/en/faqs/laptop-vs-tablet/ Do you have a kid approaching middle school age? Chances are your child has already done some school projects using the family computer. He's had to research the Web, or type and print out a report. Now you may be considering the purchase of another device to support his needs as he heads into tween hood, high school and beyond. What is best - a laptop or a tablet? What device will be more advantageous for schoolwork, and also support the social networking and game playing that kids will inevitably want to do? Technology Use in Schools Here are some examples of how kids are using technology in schools. * Online and visual learning: Many teachers have incorporated videos of lessons into their plan, either of themselves teaching the lesson, or from an outside source. Often, watching an assigned video is part of the homework. * Practicing skills: Playing math games are a fun way for kids to practice skills or math facts. Students also practice test taking or other skills with online games. * Researching topics: At an early age, schoolchildren start using the Internet to find information about topics they are learning about. The average young student knows all about Wikipedia, which has all but replaced the encyclopedias we used to use. * Reading: Textbooks and literature are becoming more...

Words: 1992 - Pages: 8

Free Essay

Newsletter

...Summary: For the February 14th issue of NAATBatt’s Advanced Battery Weekly, we highlight recent sector activities. The NAATBatt, U.S. and Asia Indices increased 2.7% w/w, 3.8% w/w and 3.2% w/w, respectively. The S&P 500 and Russell 2000 grew 3.3% w/w and 2.2% w/w, respectively. Key Highlights: • Maxwell Technologies announced it is supplying ultracapacitor-based Engine Start Modules (ESM) to Idle Free Systems to provide cranking power for a new anti-idling system. The Work Truck No Idle Heat System™ could provide up to eight hours of interior cab heat with the truck engine turned off. • The Chinese Ministry of Finance in a joint statement with the Chinese National Development and Reform Commission and the Chinese Technology and Industry ministries announced plans to provide more subsidies for electric vehicles (EVs) than previously announced. China will support the promotion of new-energy vehicles in a second batch of cities and regions, including the northeastern provinces of Jilin, Liaoning and Heilongjiang. • XL Hybrids was named by Fast Company publication to its 2014 Ranking of World’s 50 Most Innovative Companies. XL Hybrids was ranked 3rd in the ‘Innovative Companies in Energy’ section trailing Tesla Motors and General Electric. • Sumitomo has developed and installed a large-scale power storage system that utilizes used electric vehicle (EV) batteries. The commercial scale storage system, built on Yume-shima Island, Osaka, will begin...

Words: 1989 - Pages: 8

Free Essay

Systems Enginnering

...Energy Storage Moves Wind to Baseload Power LONDON -- The key to further wind sector success may be the ability to provide baseload power. New solutions based on lithium batteries can deliver convincing foundations to balance wind's variability. For more than two decades, practitioners have been developing control solutions to make operating wind energy plants more efficient. One of the latest projects commissioned by a Chinese operator was dedicated to energy storage. In China, feed-in regulations stipulate that 10 percent of the power installed from wind energy plants must be available via energy storage at any time for two hours. Norbert Hennchen, managing director of Freqcon in Walsrode, Hannover, Germany says lithium batteries possess the greatest technological potential with regards to saving energy, and therefore the ability of renewable energy sources to provide baseload power. The topic of storing renewable energy is currently on trend and is being discussed and implemented on many fronts. Energy density plays a big part in this. Pumped storage plants deliver approximately 0.5 kWh/m3 from an assumed drop height of 200 metres; in contrast, hydrogen plants deliver 500-2300 kWh/m3. With the latter, however, the efficiency of the energy supply is comparably low. Lithium battery systems are right in the middle, achieving approximately 125-400 kWh/m3 - and up to 2500 kWh/m3 under laboratory conditions. When on the subject of efficiency, Hennchen's eyes light up: "Such...

Words: 1010 - Pages: 5

Premium Essay

Intentional Tort Paper

...what are the defenses available to the tortfeasors? Short answer: John and Leroy are both guilty of committing intentional torts. However, both parties have arguable defenses. More information is needed in regards to the events that took place prior to the man assaulting the woman and the amount of time that John was confined by Mr. McPhliien. Prior to determining the appropriate statues and the defenses each party may present, each intentional tort committed must first be explained. Intentional Torts: The first intentional tort was committed by John when he began shouting at the woman, approaching her in an aggressive manner, and by grabbing her wrist. Regardless of his relationship to the woman, John committed Assault and Battery by grabbing the woman’s wrist. The three basic elements of this tort include...

Words: 1129 - Pages: 5

Premium Essay

Working Principles of the Daniell Cell

...way to eliminate the hydrogen bubble problem found in the voltaic pile, and his solution was to use a second electrolyte to consume the hydrogen produced by the first. Zinc sulfate may be substituted for the sulfuric acid. The Daniell cell was a great improvement over the existing technology used in the early days of battery development. A later variant of the Daniell cell called the gravity cell or crowfoot cell was invented in the 1860s by a Frenchman named Callaud and became a popular choice for electrical telegraphy. The Daniell cell is a type of electrochemical cell invented in 1836 by John Frederic Daniell, a British chemist and meteorologist, and consisted of a copper pot filled with a copper sulfate solution, in which was immersed an unglazed earthenware container filled with sulfuric acid and a zinc electrode. He was searching for a way to eliminate the hydrogen bubble problem found in the voltaic pile, and his solution was to use a second electrolyte to consume the hydrogen produced by the first. Zinc sulfate may be substituted for the sulfuric acid. The Daniell cell was a great improvement over the existing technology used in the early days of battery development. A later variant of the Daniell cell called the gravity cell or crowfoot cell was invented in the 1860s by a Frenchman named Callaud and became a popular choice for electrical telegraphy. The...

Words: 1866 - Pages: 8

Free Essay

Owning a Buisness

...BATTERY SAFETY AND OHMS LAW Battery Safety Basics- Do not overcharge or over-discharge. When the charger indicates that the batteries have been fully charged, you can remove them from the charger. Leaving batteries in a charger all night long or longer can cause them to be overcharged, which can result in battery failure (depending on the charger). Charging your battery over 4.25 volts can shorten its life-cycle and going over 4.5 volts can cause it to burst. Cease using your charger if this ever happens. Our recommendation on a good charger: Nitecore D2 Charger (2 Bay) or Nitecore D4 Charger (4 Bay) Efest LUC (2 Bay) Efest LUC (4 Bay) Efest Soda (2 Bay) Recharge batteries with a resting voltage below 3.6V as soon as possible. Leaving LiIon batteries in a discharged state will incur irreversible damage – creating a loss in capacity and a loss in cycles. Determining the exact voltage can be tricky, unless you have a Tank-O-Meter/Volt Meter. If you are building your own coils a Tank-O-Meter is great device to have because you can use it to test your coils and your batteries. Sure, you can always use a battery tester, but the majority of battery testers are not equipped for the types of batteries that are used in mods, or even test batteries under load condition. Do not short circuit your batteries. Short circuiting can cause a huge surge of current that will potentially burn out your battery, damage your mod, or even your face! Short circuits happen when the voltage...

Words: 1289 - Pages: 6

Free Essay

Prejudice

...Classification: Victim of an assault ICR: Assault Reported by: Sa Ba Taw DOB: 8/20/1991 Address: 2316, Gne Ave 2361 City: Albert Lea State: MN Zip: 56007 Phone: 651-307-2531 Work Phone: Victim: Sa Ba Taw DOB:8/20/1991 Address: 2316, Gne Ave 2361 City: Albert Lea State: MN Zip: 56007 Phone: 651-307-2531 Work Phone: Suspect: Unknown DOB: Unknown Address: Unknown City: Unknown State: Unknown: Zip: Unknown Phone: Unknown Date Reported: 04/23/2014 Day: Wednesday Time: 1245 Date Committed: 04/23/2014 Time Committed: 1100 Incident Location: Albert Lea Wal-Mart LGN: N/A Badge: N/A Date: 04/ 23/2014 Time Assigned: 1245 Time Arrived: 1445 Date: 04/ 23/2014: Narrative On 04-23-2014 at approximately 1245 I, uniformed (officer) Fatbardh Emra was dispatch to a call in regards of an assault that occurred in Wal-Mart- Supermarket in 1550 Blake Ave. Albert Lea MN, 56007. Upon arrival I, uniformed (officer) Emra spoke to the victim Sa Ba Taw, and saw visible injuries to him. Victim stated that inside of the supermarket Wal-Mart...

Words: 579 - Pages: 3