...CASE Paper Each of you is required to write one individual case paper this semester. This paper should be between 8 and 10 pages in length (and any appendices required). Each student will be assigned a company to research. In the event that you have done previous research on the assigned company, please advise me and I will assign a new company. Each student should then write on the investment strengths and weaknesses of their company, based upon the material covered in class and in the textbook and provide a recommendation on the company stock position. Your conclusion should be that the stock is either: undervalued, overvalued or at the appropriate value. Your paper should support this conclusion. No student can pick a company that is the duplicate the company analyzed by another student in the same class. * Paper: 8 to 10 pages in length. In the appendix to this paper you should have a copy of the four financial exhibits presented in the annual report (B/S, I/S, Cash Flow & Statement of Retained Earnings). These pages do not count towards your 8 to 10 pages. * Pages should be double-spaced and type written. You have the option of adding additional pages or additional appendices as required. However, the paper should stand on its own 2 feet without any requirement to reference any of the appendices. You should make a logical argument based upon the information covered in the write up. * Include all relevant Excel models. Excel model should cover no more...
Words: 710 - Pages: 3
...computer systems Assignment 1 - Topic: scanners Date: Student name: Student number: Tutor name: Tutorial time: Abstract This report investigates the current state of scanner technology and examines the predicted future advancements of scanners. A brief history of the scanner and its operation is initially outlined. The discussion then focuses on the advantages and limitations of the five main types of scanners in common use today: drum, flatbed, sheet-fed, slide, and hand held scanners. The performance of these scanners is examined in relation to four main criteria: resolution, bit-depth, dynamic range and software. It is concluded that further technological advances in these four areas as well as the deployment of new sensor technology will continue to improve the quality of scanned images. It is also suggested that specialised scanners will increasingly be incorporated into other types of technology such as digital cameras. Table of contents | Abstract | i | 1.0 | Introduction | 1 | 2.0 | How scanners work | 2 | 3.0 | Types of scanners | 2 | | 3.1 | Drum scanners | 2 | | 3.2 | Flatbed scanners | 2 | | 3.3 | Sheet-fed scanners | 2 | | 3.4 | Slide scanners | 3 | | 3.5 | Hand held scanners | 3 | 4.0 | Scanner specifications | 3 | | 4.1 | Resolution | 3 | | 4.2 | Bit-depth | 4 | | 4.3 | Dynamic range | 4 | | 4.4 | Software | 4 | 5.0 | Future developments | 5 | 6.0 | Conclusion | 5 | 7.0 | Reference list | 5 | | Appendicies | 6...
Words: 2638 - Pages: 11
...of scanner technology and examines the predicted future advancements of scanners. A brief history of the scanner and its operation is initially outlined. The discussion then focuses on the advantages and limitations of the five main types of scanners in common use today: drum, flatbed, sheet-fed, slide, and hand held scanners. The performance of these scanners is examined in relation to four main criteria: resolution, bit-depth, dynamic range and software. It is concluded that further technological advances in these four areas as well as the deployment of new sensor technology will continue to improve the quality of scanned images. It is also suggested that specialised scanners will increasingly be incorporated into other types of technology such as digital cameras. Table of contents Abstract i 1.0 Introduction 1 2.0 How scanners work 2 3.0 Types of scanners 2 3.1 Drum scanners 2 3.2 Flatbed scanners 2 3.3 Sheet-fed scanners 2 3.4 Slide scanners 3 3.5 Hand held scanners 3 4.0 Scanner specifications 3 4.1 Resolution 3 4.2 Bit-depth 4 4.3 Dynamic range 4 4.4 Software 4 5.0 Future developments 5 6.0 Conclusion 5 7.0 Reference list 5 Appendicies 6 Appendix 1 Image Sensor Scanner 8 Appendix 2 Frequently Used References 9 Appendix 2.1 Scanner Tips 10 Appendix 2.2 Scanners, Digital Cameras and Photo CDs 11 Appendix 2.3 The PC Technology Guide 12 1. Introduction The purpose of this report is to survey the current state of scanner technology and to briefly...
Words: 2631 - Pages: 11
...INTRODUCTION Are you tired of slow modem connections? Cellonics Incorporated has developed new technology that may end this and other communications problems forever. The new modulation and demodulation technology is called Cellonics. In general, this technology will allow for modem speeds that are 1,000 times faster than our present modems. The development is based on the way biological cells communicate with each other and nonlinear dynamical systems (NDS). Major telcos, which are telecommunications companies, will benefit from the incredible speed, simplicity, and robustness of this new technology, as well as individual users. In current technology, the ASCII uses a combination of ones and zeros to display a single letter of the alphabet (Cellonics, 2001). Then the data is sent over radio frequency cycle to its destination where it is then decoded. The original technology also utilizes carrier signals as a reference which uses hundreds of wave cycles before a decoder can decide on the bit value (Legard, 2001), whether the bit is a one or a zero, in order to translate that into a single character. The Cellonics technology came about after studying biological cell behaviour. The study showed that human cells respond to stimuli and generate waveforms that consist of a continuous line of pulses separated by periods of silence. The Cellonics technology found a way to mimic these pulse signals and apply them to the communications industry (Legard, 2001)...
Words: 414 - Pages: 2
...Abstract RFID (Radio Frequency IDentification) is a technology that incorporates the use of electromagnetic or electrostatic coupling in the radio frequency (RF) portion of the electromagnetic spectrum to uniquely identify an object, animal, or a person. It is an automatic identification method, relying on storing and remotely retrieving data whenever required using devices called RFID Tags or transponders. It is also called Dedicated Short Range Communication (DSRC). I would like to make a presentation on the following topics related to RFID technology: * Brief overview of RFID technology * Basic components of RFID * Standards followed * Simple working and Sequence of Communication involved * Advantages, applications and future scope Components of RFID Technology Tags (Chip + Antenna): An RFID Tag is an object that can be stuck on or incorporated into a product, animal or a person for the purpose of identification using radio waves. There are two main components present in the RFID tag. Firstly, a small silicon chip or integrated circuit which contains a unique identification number (ID). Secondly, an antenna that can send and receive radio waves Interrogators (Antenna + Reader): Interrogators are used to read the Tags & in certain cases even write on them. Middleware: Middleware is the needed interface between the existing company databases & information management software. Middleware provides a range of functions: • Data Filtering • System Monitoring ...
Words: 734 - Pages: 3
...Black and Decker Corporation Progress Report Finance Group Project Focus G.T. Link The corporate image of Black and Decker has gone through many corporate changes to keep a competitive advantage and ultimately see larger increases in the share price. Black and Decker is concentrated as a global manufacturer and marketer of power tools and accessories, hardware and home improvement products, and technology-based fastening systems. Due to the maturity of the market, it is essential for Black and Decker to remain a leader in product innovation and to get out of unprofitable business lines. The acquisition of Emhart resulted in many unprofitable business segments. If the acquisition was to work it was vital for Black and Decker to refocus on its core power tools, plumbing, and security hardware businesses. When Nolan Archibald was hired as CEO, an intense restructuring period set in. Inefficient plants were closed down and the development of new and existing products was developed in the new and existing plants. This also resulted in a large loss in overhead expense due to the loss of 3,000 jobs. Many shareholders were uncertain about the potential success of the Emhart transition due to the large debt/equity ratio. It took 2.7 billion in financing to acquire the company. Black and Decker sold off a total of $566 million in assets. This was a great step forward due to the $560 million dollars in goodwill added back to the balance sheet, which will hopefully...
Words: 2850 - Pages: 12
...provide a useful analogy. The pages and the ink are the hardware, while the words, sentences, paragraphs, and the overall meaning are the software. A computer without software is like a book full of blank pages -- you need software to make the computer useful just as you need words to make a book meaningful) Computers Use Random Access Technology - Data Can Be Accessed in Any Order at Any Time Regardless of Storage Position or Time of Creation. Binary: the digital language of computers. This language is composed of an alphabet containing only 2 “letters” known as bits. Any work done on a modern computer from word processing to digital audio is translated to this language. Bit: the smallest form of information in the language of computers. It is represented as a zero or a one. A bit can be considered a letter in the digital language of binary. Byte: a “word” of information in binary. It is made of a number bits determined by the bit rate. 8 bits is usually = 1 byte on modern computers. Bit rate: the number of “letters” or bits in a digital word or byte. An example of a 16 bit digital word in binary could be (01010101 10101010). * 8 bits = 1 byte * 1024 bytes = 1 kilobyte (210) * 1024 kilobytes = 1 megabyte (220) * 1024 megabytes = 1 gigabyte (230) CPU - abbreviation of central processing unit, the CPU is the brains of the computer. Sometimes referred to simply as the processor or central processor, the CPU...
Words: 1145 - Pages: 5
...In 1983, Hiroshi Yamauchi, President of Nintendo, began designing a new video game system called the Famicom, which aimed at being cheaper while having better graphics and games than the competitors. One of Yamauchi’s initial moves that proved to be a smart strategy was an implementation of a security chip in the cartridge. This allowed for only Nintendo-approved games to be played on the Famicom. Atari’s failure can mainly be attributed to the mass of games being developed by numerous third parties that diluted their game library. Nintendo knew that in order to avoid this, they would have to be more particular with who made their games, and how often these games would be released. Nintendo was able to get off to such a great start due to their smart business choices early on. They were able to get the necessary chips at the rock-bottom price of $8, due to the fact that they placed a three-million unit order. They then used their lower costs to undercut the competition with their system being priced at $100, which was significantly cheaper than its $200-$350 competitors. Yamauchi created a business model where Nintendo’s developers would only produce one or two games per year, but would have access to large development and advertising budgets. In addition to this, the production of the cartridges was subcontracted to allow for a unit cost of $6-$8, which were then sold for around $40. The combination of these two strategies allowed for developers to create a few...
Words: 1169 - Pages: 5
...Sets……………………………………………………………………………………………...3 Work Environment Web Design………………………………………………………………………………………….4 Graphic Design……………………………………………………………………………………..5 Educational Requirements Web Design…………………………………………………………………………………………5 Graphic Design…………………………………………………………………………………….5 Projected Career Outlook Web Design…………………………………………………………………………………………6 Graphic Design…………………………………………………………………………………….6 Salary Web Design………………………………………………………………………………………...6 Graphic Design……………………………………………………………………………………6 Conclusions and Recommendations…………………………………………………………………7 References…………………………………………………………………………………………………8 Introduction When choosing a career path, it can be a bit intimidating. There is lots of information to sift through, such as salary, education needed, what skill sets are required, what is the work environment like, and the list can go on and on. It also can be a bit difficult because each person wants to make sure that not only can they support themselves or their family, but will they be happy with this choice for, sometimes, the rest of their lives? Choosing can be a difficult decision, but with the right information, it doesn’t always have to be. There are a few different paths in the Multimedia and Design field, but this document will focus on two of the major choices: Web Design versus Graphic Design. Purpose This report is designed for those who are having trouble finding guidance in choosing the correct path, therefore eliminating the need to take unnecessary classes and credits and...
Words: 2083 - Pages: 9
...MAGNETIC STRIPE TECHNOLOGY I recalled a week before Christmas; I was at the shopping mall buying some clothes, shoes, bags, and gifts for my niece and nephews. Afterwards, I was about to pay to the cashier. Surprisingly, the amount that I purchased was greater than the cash on my hand. I was really nervous that time because it was the first time that happened to me; however, I remembered that I have ATM card on my wallet. I slip out my card from my wallet and gave it to the cashier. She courteously took the card from me and swiped it through a card reader. After a while, the lady on the cashier handed back my card with a receipt and gave me a generous smile while saying, “Thank you, Sir”. In that particular moment, I wondered or you may also wondered, “How did this transaction happen?” or “How can all information be stored on that card?” given the fact that it is just a plastic card. The answer on these questions lies on the back of our card. The black stripe, also known as the magnetic stripe, is what makes this possible. Magnetic stripe technology was invented Fritz Pfeulmer, a German-born audio engineer in 1928. Although it was invented that time, it was not until the early 1960s that the technology found its way to meet the demands of people in metropolitan area. It was then first installed by the London Transit Authority as a mean to aid the increasingly busy London Underground. Its success was spread across the Atlantic Ocean. More so, by the late 1960’s, San Francisco...
Words: 1322 - Pages: 6
...of Department of ECE,SACET, Chirala, AP, India Associate Professor of the Dept ECE, SACET, Chirala, AP, India 3 Electronics and Comunication Department, St.Ann‟s college of engineering & Technology, Chirala, india. E-mail:innamurivaibhav1@gmail.com, kota.saicharan@gmail.com, sravanthi.408b@gmail.com, seenu_dasari@rediffmail.com 2 Abstract: This project presents a binary floating point multiplier based on Vedic algorithm. To improve power efficiency a new algorithm called URDHVA-TRIYAKBHYAM has been implemented for 24 X 24 bit multiplier design. By using this approach number of components can be decreased and complexity of hardware circuit can be decrease. In this project, Vedic multiplication technique is used to implement IEEE 754 floating point multiplier. The Urdhava-Triyakbhym sutra is used for the multiplication of Mantissa i.e., 24x24 bits. The sign bit of the result is calculated using one XOR gate and a Carry Save Adder is used for adding the two biased Exponents. The underflow and overflow cases are handled. The inputs to the multiplier are provided in IEEE 754, 32 bit format. The multiplier is implemented in VHDL and Spartan3E FPGA is used. The result consists of 32 bit binary number of which MSB represent sign, next 8 bit represents Exponent and remaining 23 bits represents Mantissa. Keywords: Vedic Mathematics, Urdhva -Triyakbhyam sutra, Floating Point multiplier, Field Programmable Gate Array ( FPGA), Carry Save Adder main aims of designing floating...
Words: 2343 - Pages: 10
...Progress Report 1 * Which stocks did you invest in during this period? 1. Apple 2. Intel 3. Microsoft 4. International Business Machines 5. General Motors 6. Go Pro 7. AT&T INC. 8. Skyworks solutions 9. Cognizant Technology Solutions 10. CVS Caremark Corporation 11. Merck 12. Home Depot 13. Whirlpool Corporation 14. Vertex Pharmaceuticals Incorporated 15. Tata Motors 16. TreeHouse Foods 17. Amira Nature Foods 18. SAP AG 19. Infosys Sponsored American Deposit Receipt 20. Qualcomm Incorporated. * What are the weights you allocated to each stock and why? In my stategy, I said that I am going to divide my total money into 4 part, 125,000 each. One for technology stock, one for consumer stocks, one using the value investing strategy and lastly, one for investing in bond. Since the beginning of the trading period I haven’t invested in any Bonds yet because I’m still trying to figure out which one to invest in. So far my weights for ever sector is as follows: Technology stocks (0.5937), Consumer Stocks (0.0217), Value Investing strategy (0.5096). I also calculated the individual weights for every stock against the total. The weights are as follows: Apple – 0.001920. I only bought 10 shares of AAPL because, even though the stock has been doing really good in the market, I’m still quite hesitant about it and I feel like it’s a risky stock...
Words: 4038 - Pages: 17
...performance of processor. A microprocessor can move data from one memory location to another. A microprocessor can make decisions and jump to a new set of instructions based on those decisions. The native language of a microprocessor is Assembly Language. The above mentioned are the three basic activities of a microprocessor. An extremely simple microprocessor capable of performing the above mentioned operations loos like: Index terms—Modern, architecture, Intel, PC, Apple. I. INTRODUCTION The microprocessor is the heart of any normal computer, whether it is a desktop machine , a server or a laptop . The first microprocessor to make a real splash in the market was the Intel 8088, introduced in 1979 and incorporated into the IBM PC (which first appeared around 1982).The microprocessor is made up of transistors. CHIPA chip is also called an integrated circuit. Generally it is a small, thin piece of silicon onto which the transistors making up the microprocessor have been fixed. A chip might be as large as an inch on a side and can contain tens of millions of transistors. Simpler processors might consist of a few thousand transistors fixed onto a chip just a few millimeters square. A microprocessor is a...
Words: 1808 - Pages: 8
...What has Windows Server 2008 brought us? ITT 221 ITT Technical Institution What has Windows Server 2008 brought us? With the growth of businesses, we see the need for technology in the workspace increase as well. Businesses now acquire the use of networks based on servers, more so than in the past. Many aspects of a business are now electronic as we are attempting to become a “paperless” society. Microsoft understands the needs of these corporations and growing companies, technology wise. In 2008 they launched a product that would assist in the securing and proper sharing of the needed information. One February 28, 2008, Microsoft released Windows Server 2008. This hit the market in different editions as well as with vast improvements from its predecessor Windows Server 2003. The editions that Server 2008 comes in are; Web, Standard, Enterprise, and Datacenter. The main differences we can compare between these have to do with the number of processors, amount of physical memory, and the features supported. To begin with the Web edition is for computers that are serving as Internet or intranet Web servers. Although it is comparable to the other editions; it cannot function as an Active Directory domain controller and you are not allowed to run client/server applications that are not web based. The maximum amount of processors that Web Edition can support is four. This would be suitable for a small Web based business, which doesn’t need the high-end additional features...
Words: 1470 - Pages: 6
................. 3 FILE AND FILE SYSTEM: WHAT THEY ARE.................................................................. 3 FILE ALLOCATION TABLE (FAT)...................................................................................... 4 FAT12 (12-bit)....................................................................................................................... 4 FAT16 (16-bit)....................................................................................................................... 4 FAT32 (32-bit)....................................................................................................................... 5 HIGH PERFORMANCE FILE SYSTEM (HPFS)................................................................ 5 NEW TECHNOLOGY FILE SYSTEM (NTFS).................................................................... 5 CONCLUSION.......................................................................................................................... 6 APPENDIXES............................................................................................................................ 7 Appendix A: File Allocation Table (FAT) Bit and Usage (Figure 1).................................... 7 Appendix B: FAT and NTFS File System Comparison (Figure 2)........................................ 8 REFERENCES.......................................................................................
Words: 1524 - Pages: 7
