...Writing Your Graduate School Application Essay Generally speaking, there are two types of application essays for graduate school: the statement of purpose (SOP) and the personal statement. (Refer to FAQs to find out how the two types are different.) Both types let you convince the admissions committee that you are a good fit for the program and can contribute to the department. Although different graduate schools may ask you to answer different prompts, most ask that you write no more than a two-page application essay. The application essay is difficult to write because you must pitch your candidacy to a few department faculty members who read through hundreds – or sometimes thousands – of other essays. In this handout, you will learn how to show these busy readers that you will contribute meaningfully to the university and their department. 1. Relate your past and present experiences to the future. In their application essays, many applicants make the mistake of underemphasizing the future. But it’s important that you show how your past experiences have informed your present work, and how your present work can be extended to the future or raise new research questions. Admissions committees assess many qualified applicants based on whether their research will reflect positively on the university and their department. Committees will think your past and present work is relevant only if it relates directly to your plans for the future. If you don’t know exactly where your current...
Words: 2318 - Pages: 10
...a safe, healthful environment for all our employees. This written hazard communication plan is available at the following location for review by all employees: [Location name]. Identifying hazardous chemicals A list is attached to this plan that identifies all hazardous chemicals with a potential for employee exposure at this workplace. [Attach list]. Detailed information about the physical, health, and other hazards of each chemical is included in a Safety Data Sheet (SDS); the product identifier for each chemical on the list matches and can be easily cross-referenced with the product identifier on its label and on its Safety Data Sheet. Identifying containers of hazardous chemicals All hazardous chemical containers used at this workplace will either the original manufacturer’s label --that includes a product identifier, an appropriate signal word, hazard statement(s), pictogram(s), precautionary statement(s) and the name, address, and telephone number of the chemical manufacturer, importer, or other responsible party -- OR a label with the appropriate label elements just described; OR workplace labeling that includes the product identifier and words, pictures, symbols, or combination that provide at least general information regarding the hazards of the chemicals. [Name of person or job title] will ensure that all containers are appropriately labeled. No container will be released for use until this information is verified. Workplace labels must be legible and...
Words: 894 - Pages: 4
...Sample Statement of Purpose: MBA The term “globalism” has become overused, and often misused. In fact, we might say that it has actually been devalued to the level of the everyday language of buzzword-brandishing marketing pundits. Such freewheeling usage has perhaps prompted many a CEO (or future CEO) to launch into a global plan or strategy without proper consideration of the demands and dynamics of the international marketplace. Many would-be globetrotters neglect the acquisition of language skills, knowledge of foreign trade and tax laws, accounting standards, etc., all of which are necessary to effectively “go global.” Superficial knowledge only leads to failure. This has, indeed, happened, and while there is no doubt that neglecting to capture the gains achievable in overseas markets is equally suicidal, misguided attempts at competing globally (along with rapidly developing opportunities in the global marketplace) have placed a dramatic premium on individuals who take the time to properly train themselves in international business. For me, the Columbia MBA is a significant component of this training. I foresee my own career moving in the direction of European/American business, initially from an advisory perspective (i.e. investment banking or consulting) and ultimately from a leadership role within a manufacturing entity, preferably a start-up venture. This prophecy, in part, has evolved from my past experiences in western and eastern Europe which, in turn, have formed...
Words: 4285 - Pages: 18
... | | 2. Discipline offered in your institute. (Choose as many as apply) |electronics & communication engineering | | |electrical engineering | | |mechanical engineering | | |chemical engineering | | |civil engineering | | |computers & IT engineering | | OTHER………………………………………………………………………………………………………………………….. 3. Year of establishment of your institute. [Put (√) mark in the box] |Before 1950 | | |1951-1980 | | |1981-2000 | | |After 2000 | | 4. Number of UG programmes in engineering. [Put (√) mark in the box] |Less than 5 | | |6-10 | | |11-15 | | |>15 | | 5. Number of PG programmes in engineering. [Put (√) mark in the box] |Less than 5 | | |6-10 | | |11-15 | | |>15 |...
Words: 816 - Pages: 4
...RISK MANAGEMENT – AN AREA OF KNOWLEDGE FOR ALL ENGINEERS A Discussion Paper By: Paul R. Amyotte, P.Eng.1 & Douglas J. McCutcheon, P.Eng.2 Chemical Engineering Program Department of Process Engineering & Applied Science Dalhousie University Halifax, Nova Scotia, Canada B3J 2X4 2 1 Industrial Safety & Loss Management Program Faculty of Engineering University of Alberta Edmonton, Alberta, Canada T6G 2G6 Prepared For: The Research Committee of the Canadian Council of Professional Engineers October 2006 SUMMARY The purpose of this paper is to “seed” the discussion by the Research Committee of the Canadian Council of Professional Engineers (CCPE) on the topic of risk management. The paper is in part a research paper and in its entirety a position paper. As can be inferred from the title, the authors hold the firm opinion that risk management is an area of knowledge with which all engineers should have familiarity and a level of competence according to their scope of practice. The paper first makes the distinction between hazard and risk. The two terms are often used interchangeably when in fact they are quite different. A hazard is a chemical or physical condition that has the potential to cause harm or damage to people, environment, assets or production. Risk, on the other hand, is the possibility or chance of harm arising from a hazard; risk is a function of probability and severity of consequences. A description of the process of risk management is then given....
Words: 14427 - Pages: 58
...Personal statement examples Find College Courses and Degrees There are no ‘right’ ways to writing your personal statement, but there are many ‘wrong’ ways of doing it. On this page you will not only find everything you need to know about putting together a professional personal statement, but will also have access to dozens of expertly written ones. These samples are a great way to see how other people put together their personal statements, and to visualise the sort of structure and language they use. Reading through these will allow you to judge which ones you think are good or bad, which in turn will greatly help you in putting together your own winning statement. YOU ARE STRONGLY ADVISED NOT TO COPY THESE EXAMPLES WORD FOR WORD, BUT INSTEAD USE THEM AS USE THEM AS GUIDES AND AS A SOURCE OF INSPIRATION. Many students struggle to put together an effective personal statement, primarily because they find it difficult to write about themselves. They may also fall for other common essay writing mistakes such as straying from the core subject and message they should be trying to get across. To help students overcome these potential pitfalls we have developed this resource page as a guide to giving them useful tips, strategies and techniques on writing a professional profile that is of the highest quality and one that will maximise their chances of enrolling at their first choice university. By following our advice, preparing properly and with a bit of practise, putting...
Words: 2730 - Pages: 11
...the name dear sir/ madam dear (title) family name 1( 17/03/2014( Opening words… thank you for reading my application. pleading …. not good I am most interested in your you want their job.. nnot the one advertised position… I would like to enquire further about the fascinating position offfered at... informal want more information, not applying I am very keen to apply for a position in a company which is results oriented and on the brink of success such as yours. sounds generic, which organisation? brink of success: means they are not i am writing to apply for the position as a junior account manager at E& Y ( no abbrievation) as advertised on seek.com recently Avoid… ‘colourful’ Adjectives (hyperbole) Empty statements Cliches Abbreviations Negative language False optimism (demonstrating how little you really know). I have recently completed a degree in astrophysics at Monash university with avoid some adjectives stellar results. show dont tell which applies here you are telling your results I have developed excellent skills in written communication as well as a thirst for cliche demonstrate why you have the certain skill learning. I currently hold a certificate as an MMA trainer with DJ’s and practice regular TM. While I have no experience as a lion tamer I am sure that I could learn quickly if given the opportunity. do not, would not desperation wouldnt that mean you are willing to learn? 2( 17/03/2014( include CONCRETE – TANGIBLE...
Words: 844 - Pages: 4
...Maintain workplace safety in the property industry Question 1 Explain in your own words the purpose of the Occupational Health and Safety Act 2000 in New South Wales and other similar Acts in other States and Territories. The Powers of the Health and Safety Representative A health and safety representative has the power to: Identify Workplace Hazards The health and safety representative has the power to identify workplace hazards. This power is usually exercised by conducting workplace inspections. Obtain Information from the Employer The health and safety representative is entitled to the same information available to a joint committee member. Under the Act, the employer must share with the representative any such information that he or she has. Be Consulted about Workplace Testing If the employer intends to do testing of any kind in or about the workplace and related to occupational health and safety, the representative has the right to be consulted before the testing takes place. Make Recommendations to the Employer The representative has the power to make recommendations to the employer on ways to improve workplace health and safety–the same power given to joint committees. Investigate Serious Injuries If a worker is killed or critically injured on the job, the representative has the right to inspect the scene where the injury occurred and any machine, equipment, substance, etc., that may be connected with it. Duties of employers...
Words: 4869 - Pages: 20
...Description of Technical Memo Format Technical memos are used to communicate short reports where a formal technical report is not warranted. Typically they would be employed to communicate the solution to a posed question or assignment involving a technical analysis. Technical memos often include equations, figures and illustrations, tables, data and attached appendices. Due to their longer length, the memo’s text is broken into standard first level sections, and where appropriate, into second level sections depending on the complexity of the information being conveyed. Technical reports must be clear and concise. Proper organization of the information is essential. A typical report is divided into the following sections, * Executive Summary * Introduction or Purpose * Theory and Analysis * Results and Discussion * Conclusions and Recommendations * References * Attachments and/or Appendices These sections are suitable for many circumstances but may be modified according to need. On the following pages, detailed information about the contents and function of each section is provided. Section headings are aligned with the left-hand margin in a memo and may be simply capitalized and/or given bold or italicized font. Maintain the 12 point type size. Recognize that the format itself is also flexible; however, all the critical elements or information need to be included. The Results and Discussion and Conclusions sections are sometimes...
Words: 1817 - Pages: 8
...Apple Supplier Code of Conduct Apple is committed to ensuring that working conditions in Apple’s supply chain are safe, that workers are treated with respect and dignity, and that manufacturing processes are environmentally responsible. Apple’s suppliers (“Suppliers”) are obligated, in all of their activities, to operate in full compliance with the laws, rules, and regulations of the countries in which they operate. This Supplier Code of Conduct (“Code”) goes further, drawing upon internationally recognized standards, in order to advance social and environmental responsibility. Apple requires that Suppliers implement this Code using the management systems described below. The Apple Supplier Code of Conduct is modeled on and contains language from the Electronic Industry Code of Conduct. Recognized standards such as International Labour Organization Standards (ILO), Universal Declaration of Human Rights (UDHR), Social Accountability International (SAI), and the Ethical Trading Initiative (ETI) were used as references in preparing this Code and may be useful sources of additional information. A complete list of references is provided at the end of this Code. As an extension of the Code, Apple maintains a series of detailed Standards that clarify our expectations for compliance. Labor and Human Rights Suppliers must uphold the human rights of workers, and treat them with dignity and respect as understood by the international community. Antidiscrimination Suppliers...
Words: 2593 - Pages: 11
...PROJECT ON NANO TECHNOLOGY CONTENT * INTRODUCTION * WHAT IS NANO SCIENCE? * IS THERE A NANO TECHNOLOGY? * NATIONAL NANO TECHNOLOGY INITIATIVE * CHEMISTRY’S ROLE IN NANO SCIENCE AND NANO TECHNOLOGY * NANO FABRICATION * NANO MEDICINE * RISKS OF NANO TECHNOLOGY * NANO TECHNOLOGY GOALS * SOCIETAL IMPLICATIONS * CONCLUSION INTRODUCTION There have been many influences and drivers for the development of technologies that allow functional components to be constructed at smaller and smaller scale. The semiconductor revolution in the second half of the 20th century was driven by cost, speed, novel function,and power consumption. Semiconductor science and its child, large-scale integration of electronic circuitry, have been responsible for an unprecedented paradigm change in almost every aspect of human life. The change is arguably even more profound than that which resulted from the industrial revolution. As we shall see later in this paper, although the fundamental limits of Moore’s Law have not yet been reached, this and the increasing energy consumption of these paradigm-breaking technologies will necessitate another paradigm shift in the near future.In terms of the influence of individuals, the development of what we now call functional nanoscience clearly owes much to several outstanding scientists, all of whom were awarded the Nobel Prize for their work. Shockley, Bardeen and Brattain’s discovery of the transistor,Kilby’s...
Words: 5567 - Pages: 23
...and limitations of what can be done within the boundaries around him/her. Ethics is one word that can unite all professions and prevent the negative outcomes of many decisions. However, it seems each profession possesses its own code. Doctors can’t abide by the engineering code and engineers can’t abide by the medical code. Should engineering ethics be taught to the future engineers? Is the engineering code well written enough to make the engineer abide by its limits? Every day an engineer make a crucial decision regarding an engineering problem; this decision can be fruitful or devastating regardless of what the code of ethics says. The decision itself will influence the surrounding matter. Many universities around the world especially in USA focus on engineering ethics and it is a mandatory course for students to become engineers. Is this influencing the student’s future decisions? If it actually does, then why not all countries are convinced with it? I mean an engineer is an engineer with the same expectations and ethics whether he was from USA or Japan or France. For instance, in 2000, the U.S Accreditation Board for Engineering and Technology (ABET) took an explicit step by stating in its criteria that engineering programs must always...
Words: 1875 - Pages: 8
...Statement of Purpose - MBA 1. Studying for an MBA requires a certain determination and strength of character. In recent years, the business world has become rapidly integrated across once restricting borders, and anyone with high goals in the business world must have an international perspective and be aware of the realities of different international arenas. I am unique, and uniquely fortunate, to have a diverse background both academically and professionally which has exposed me to different continents, peoples, cultures, and languages. As a native of Asia, I am familiar with the increasingly important markets of this region, and as such I am thoroughly prepared for the demands and challenges presented by undertaking study in the MBA program at your institution. From a young age, I set goals beyond those of my peers. I decided to pursue a Bachelor’s degree in International Hotel Management, but in recognition of the limitation of programs in this field in my native country, I decided to pursue my undergraduate degree in Europe. The international hotel management course I joined was run by Goodwell University in the UK, and due to the experience of the instructors and the overall sophistication of the program, I received an incredibly valuable learning experience, beyond that which I could have received elsewhere. My undergraduate coursework at Goodwell University focused on management marketing, accounting, and various aspects of tourism. I received broad business-based...
Words: 4216 - Pages: 17
...|Work Activity Description |Installation of NMS in BCCR |SWMS No. | | |Site Name / Address |BCCR |Project No. |Q-LNG01-95-IQ-0008 | |Principle Contractor / Project Name |Kordia/Kordia APLNG Project | |Emergency Response Plan Required and Attached |YES (will be completed on site) |ER Plan No. |Identified Control Room Plan | |Personnel Consulted in Development SWMS |Daniel Beamish, Varinderjit Singh, Bentley Spencer | |Approval |Rev. 1 | |Applicable Legislation ...
Words: 793 - Pages: 4
...American College of Commerce and Technology Revised: April 6, 2016 Course Syllabus |I. General Information | |Course Number & Title: |CIS557 - Decision Making Under Uncertainly | | |4062 | |Section: | | | |4.5 Quarter Hours Credit | | |CIS: Lecture 40 hours, Laboratory 10 hours | | |Wednesday 4:00 -8:10 PM | | |Spring Quarter, 2016 | |Instructor: |Nazar Younis, Ph.D. | |Instructor Email Address: |Nazar.younis@acct.edu | | ...
Words: 1880 - Pages: 8
