...Table of Contents INTRODUCTION 2 DESIGNING AND IMPLEMENTING AN AUTOMATIC IP-ADDRESSING MECHANISM 3 AUTOMATIC IP-ADDRESSING SCHEME FOR THE UWS NETWORK 3 INSTALLING AND AUTHORIZING A DHCP SERVER 4 CREATING AND CONFIGURATION OF DHCP SCOPES 8 CREATING AND TESTING DHCP CLIENT RESERVATIONS 10 IMPLEMENTING DHCP RELAY AGENTS 12 DOMAIN NAMING STRATEGY 16 DOMAIN NAME SERVICE INSTALLATION 17 DOMAIN NAME SERVICE LOOK UP ZONES 18 ZONE AUTHORITY DELEGATION 23 DNS DYNAMIC UPDATES 25 DNS RESOURCE RECORDS 25 NETBIOS NAME RESOLUTION 27 INSTALLATION OF WINS 27 STATIC WINS RECORD 28 CONFIGURING REPLICATION PARTNERS 30 ALTERNATIVE IP ADDRESSING STRATEGY 31 ALTERNATE NAME RESOLUTION TECHNIQUES 32 NETWORK PLAN FOR THE UWS GLASGOW SITE 32 NETWORK PLAN FOR THE UWS CLYDE SITE 33 NETWORK PLAN FOR THE UWS HEAD OFFICE SITE 33 OVERVIEW OF THE UWS NETWORK INFRASTRUCTURE AS A WHOLE 34 TROUBLESHOOTING STRATEGY FOR UWS NETWORK 34 BACK UP AND FAULT TOLERANCE STRATEGY FOR NETWORK SERVICES 38 NETWORK HEALTH MONITORING AND ANALYSES 38 CONNECTIVITY SOLUTIONS FOR MULTI-VENDOR -ENVIRONMENT 40 REMOTE CONNECTIVITY TO UWS NETWORK USING VPN 41 CONFIGURING INBOUND VPN CONNECTION 41 CONFIGURING REMOTE ACCESS POLICIES 45 CONFIGURING OUTBOUND VPN CONNECTION 48 NETWORK COUNTERACTIVE APPROACHES WITH REGARDS TO SECURITY THREATS 50 IMPLEMENTATION OF CERTIFICATE SERVICES 51 IPSEC IMPLEMENTATION 56 References 62 INTRODUCTION This is a case study about a company...
Words: 5792 - Pages: 24
...used IP addressing scheme is IPv4 2. The most recent and largest address space IP addressing scheme is IPv6 3. To distribute IP addresses automatically, a network administrator would configure the DHCP service. Dynamic Host Configuration Protocol (DHCP) 4. The first attempt at breaking up IP address space used classfull addressing to provide address ranges of differing sizes. 5. Prior to the introduction of the Domain Name System, computers used HOSTS files to map human-readable named to IP addresses. 6. A(n) subnet mask is used to separate the host address portion of an IP address from the network address. 7. The subnet mask within the TCP/IP configuration is used to distinguish the network address from the host address. 8. In dotted-decimal notation, each IPv4 address is broken up into four octets. 9. Server computers and other systems that need to be accessed reliably by network clients should be configured with a(n) static IP address 10. The method of breaking up IP address space into address ranges of flexible size is called Classless Inter-Domain Routing (CIDR) Multiple Choice 1. What must each host on a TCP/IP network be configured with in order to communicate with other hosts? IP address 2. What is the process of transmitting TCP/IP traffic from one IP subnet to another? Routing 3. An IP network that...
Words: 418 - Pages: 2
...INTERNET PROTOCOLS & APPLICATIONS * TCP/IP: The TCP/IP suite of protocols has become the dominant standard for internetworking. TCP/IP represents a set of public standards that specify how packets of information are exchanged between computers over one or more networks. * IPX/SPX: Internetwork Packet Exchange/Sequenced Packet Exchange is the protocol suite originally employed by Novell Corporation’s network operating system, NetWare. It delivers functions similar to those included in TCP/IP. Novell in its current releases supports the TCP/IP suite. A large installed base of NetWare networks continue to use IPX/SPX. * NetBEUI: NetBIOS Extended User Interface is a protocol used primarily on small Windows NT networks. NetBEUI cannot be routed or used by routers to talk to each other on a large network. NetBEUI is suitable for small peer-to-peer networks, involving a few computers directly connected to each other. It can be used in conjunction with another routable protocol such as TCP/IP. This gives the network administrator the advantages of the high performance of NetBEUI within the local network and the ability to communicate beyond the LAN over TCP/IP. * AppleTalk: AppleTalk is a protocol suite to network Macintosh computers. It is composed of a comprehensive set of protocols that span the seven layers of the Open Systems Interconnection (OSI) reference model. The AppleTalk protocol was designed to run over LocalTalk, which is the Apple LAN physical topology...
Words: 1711 - Pages: 7
...1 Assignment 1 windows 2008 network services Short for Dynamic Host Configuration Protocol, a protocol for assigning dynamic IP addresses to devices on a network. With dynamic addressing, a device can have a different IP address every time it connects to the network. In some systems, the device's IP address can even change while it is still connected. DHCP also supports a mix of static and dynamic IP addresses. Dynamic addressing simplifies network administration because the software keeps track of IP addresses rather than requiring an administrator to manage the task. This means that a new computer can be added to a network without the hassle of manually assigning it a unique IP address. Many ISPs use dynamic IP addressing for dial-up users. Short for Domain Name System (or Service or Server), an Internet service that translates domain names into IP addresses. Because domain names are alphabetic, they're easier to remember. The Internet however, is really based on IP addresses. Every time you use a domain name, therefore, a DNS service must translate the name into the corresponding IP address. For example, the domain name www.example.com might translate to 198.105.232.4. The DNS system is, in fact, its own network. If one DNS server doesn't know how to translate a particular domain name, it asks another one, and so on, until the correct IP address is returned. DHCP would be better used if you were going to set up a large network of computers I’d say about 25 or more. Also...
Words: 314 - Pages: 2
...Essential Network Protocols Modern computer networking leverages many components to enable computers on one network (or opposite side of the world) to communicate with a computer on a different network (or other side of the world). Of the components that enable network communication, there are several in the TCP/IP suite of protocols that work in the background to provide reliable Internet connection and data transport every day for millions of computers worldwide. Internet protocol or IP is an essential component of modern internetwork communication. IP is a connectionless protocol that provides neither fault tolerance nor error correction. It is also not responsible for the setup or teardown of network communications. The primary job assigned to IP is logical addressing and routing as it resides at layer 3 (the Network layer) of the OSI model. While every host on the network has a hardware address (also called a MAC address), hosts can only communicate with other hosts in the same broadcast domain using MAC addressing. For internetwork communication, a logical, unique network address is required so that the devices forwarding network traffic (primarily routers), can determine the source and destination and best route to forward data packets. The ARP or Address Resolution Protocol enables devices on a single network, in a single broadcast domain, to find the hardware or MAC address of a device on the network given the IP address...
Words: 1258 - Pages: 6
...Name System (or Service or Server), an Internet service that translates domain names into IP addresses. Because domain names are alphabetic, they're easier to remember. The Internet however, is really based on IP addresses. Every time you use a domain name, therefore, a DNS service must translate the name into the corresponding IP address. For example, the domain name www.example.com might translate to 198.105.232.4. The DNS system is, in fact, its own network. If one DNS server doesn't know how to translate a particular domain name, it asks another one, and so on, until the correct IP address is returned. DHCP - Short for Dynamic Host Configuration Protocol, a protocol for assigning dynamic IP addresses to devices on a network. With dynamic addressing, a device can have a different IP address every time it connects to the network. In some systems, the device's IP address can even change while it is still connected. DHCP also supports a mix of static and dynamic IP addresses. Dynamic addressing simplifies network administration because the software keeps track of IP addresses rather than requiring an administrator to manage the task. This means that a new computer can be added to a network without the hassle of manually assigning it a unique IP address. Many ISPs use dynamic IP addressing for Internet subscribers. RRAS - Routing and remote access service (RRAS) is a suite of network services in the Windows Server family that enables a server to perform the services of a...
Words: 708 - Pages: 3
...NT1330 Client-Server Networking II Name: Homework 1 Ch. 1 (70-642): Introduction to Networking Concepts Fill in the Blank: 1-10 The most widely used IP addressing scheme is IPv4. The most recent and largest address space IP addressing scheme is IPv6. To distribute IP addresses automatically, a network administrator would configure the DHCP service. The first attempt at breaking up IP address space used classful addressing to provide address ranges of differing sizes. Prior to the introduction of the Domain Name System, computers used HOST files to map human-readable named to IP addresses. A(n) Subnet Mask is used to separate the host address portion of an IP address from the network address. The subnet mask within the TCP/IP configuration is used to distinguish the network address from the host address. In dotted-decimal notation, each IPv4 address is broken up into four octets. Server computers and other systems that need to be accessed reliably by network clients should be configured with a(n) static IP address. The method of breaking up IP address space into address ranges of flexible size is called CIDR . Page Break Case Scenario Case Scenario 1-1: Designing Windows Server 2008 Network Services Lucerne Publishing is a publishing company based in New York City, New York, which produces science textbooks for colleges and medical schools. In recent months, Lucerne Publishing has been planning...
Words: 574 - Pages: 3
...1Lesson 1: Overview of Local Area Networks Objectives By the end of this lesson, you will be able to: Describe the functions and advantages of a network. Describe the evolution of networking models. Compare and contrast server-based and peer-to-peer networks. Identify the characteristics of local area networks (LANs). Identify the functions of a networking operating system, network interface cards and transmission media. Compare wired and wireless connections. Identify the advantages of using open standards such as Transmission Control Protocol/Internet Protocol (TCP/IP). Identify the two types of addressing used on a LAN: MAC addresses and IP addresses. Describe the structure and allocation of IPv4 addresses. Describe the structure of IPv6 addresses. Identify the advantages of using private IP addressing, and describe the process of Network Address Translation (NAT). 1-2 Local Area Networks (LANs) Pre-Assessment Questions 1. In a centralized computing model, what is situated at the center of the network? a. b. c. d. 2. node host mainframe client There is no centralized management of network resources in which type of network? a. b. c. d. 3. A A A A A A A A peer-to-peer network server-based network mainframe network domain-based network What are two characteristics that describe a local area network (LAN)? © 2012 CertPRESS, a division...
Words: 8056 - Pages: 33
...IP Addressing Scenario The first thing that we must take in consideration is the number of hosts (145). For my design, I could use the 192.168.0.0 address space using /21 (192.168.0.1 - 192.168.7.254). My subnet mask on the devices will be 255.255.255.0. I will reserve the first and last 20 or so addresses in each DHCP for statically assigned addresses and network devices / gateway addresses. * 192.168.0.0 /24 for servers-all static * 192.168.1.0 /24 for pc's printers- operational for DHCP 192.681.1.21 - 192.168.1.230 * 192.168.2.0 /24 for wireless - functional for DHCP 192.168.2.21-192.168.2.230 * 192.168.3.0 /24 for VoIP - working for DHCP 192.168.3.21 - 192.168.3.230 * 192.168.4.0 - 192.168.7.254 for future usage . We should have multiple domain servers and DHCP servers. Firewall always needs to be used even though most computers with windows 7 come with it. Firewall is very important because it block any outside intrusion. That way it can be monitored. All type of security can be implanted to assure that the servers can’t be infiltrate by intruders, like finger print recognition, password expiration…. It will be my responsibility to ensure that all policy regarding the security of each computer and server will meet the criteria. Each IP addresses should be addressed dynamically because it will be easier and it won’t take a lot of time and that way we won’t have to go to each computer and assign them statically. The only that we will have to assign...
Words: 510 - Pages: 3
...IP Addresses Classes and Special-Use IP Address Space An IP address is a unique address that different computers on a computer network use to identify and communicate with one another. An IP address is used as an identifier to find electronic devices connected to one another on a network. Therefore, each device in the network must have its own unique address. An IP address is like a mailing address that is used to deliver data to a computer. Some IP addresses are meant to be unique within the scope of the Internet, whereas others are meant to be unique within the scope of a specific network. When IP was first standardized in September 1981, the specification required that each system attached to an IP-based Internet be assigned a unique, 32-bit Internet address value. Systems that have interfaces to more than one network require a unique IP address for each network interface. To provide the flexibility required to support networks of varying sizes, the Internet designers decided that the IP address space should be divided into three address classes-Class A, Class B, and Class C. This is often referred to as classful addressing. Each class fixes the boundary between the network prefix and the host number at a different point within the 32-bit address (Semeria, 2013). Class | Leading bits | Size of network number bit field | Size of rest bit field | Number of networks | Hosts per network | Start address | End address | A | 0 | 8 | 24 | 127 (2 are reserved) | 16,777,214...
Words: 630 - Pages: 3
...an X or just a line through it will be marked as incorrect. True/False Indicate whether the statement is true or false. 1. IPv6 uses 128 bits, or 16 bytes, for addressing, thus providing 2128 (about 340 billion) unique addresses. A True B False 2. Dynamic IP addresses can be assigned when administering TCP/IP hosts. These addresses must be configured and maintained manually. A B True False 3. Using DHCP relay agents eliminates the need to have a DHCP server on every subnet. A True B False 4. One benefit of the hierarchical structure of DNS is that it is possible to have two hosts with the same host names that are in different locations in the hierarchy. A B True False 5. ICS turns your computer into a router so that other computers on the local network can access its Internet connection. A B True False 6. If you inappropriately allowed network discovery in a public network environment (for example, an Internet café), you would allow total strangers to see and access any file shares on your system. A B True False Steve Todd Page 1 of 9 7. Because the software is installed into a single partition, the specified minimum storage requirements actually apply to the space within the partition being used and not to the total drive size. A B True False 8. If you set the IP address manually, you will not need to provide DNS server information manually. A True B False 9. By default,...
Words: 1872 - Pages: 8
...The OSI and TCP/IP The OSI model is an important part of providing network services over the Internet. This paper describes the seven different levels of the OSI model and the TCP/IP stack. Also, this paper will compare and contrast the main protocols being TCP and IP and the functions of each protocol. Also, this paper will discuss as to why the OSI model is important and why we still need the OSI model in today’s technological age of information exchange. Application Layer The Application Layer is number seven of the OSI model, which provides user interfaces that end-users are able to understand and interact through services, such as E-mail, FTP, Telnet, instant messaging software, IRC and DNS applications (Petri, 2009). Presentation Layer The Presentation Layer is number six of the OSI model, and it responds to the service requests of the application layer and sends requests to the session layer. Specific functions of the presentation layer are as follows: • Translates data from applications into local machine formats the computer can understand and vice-versa for the end-user. • Communicates with the applications layer. • Communicates with the session layer (Petri, 2009). Session Layer The Session Layer is number five of the OSI model, and it keeps track of connections. The session layer keeps track of multiple file downloads requested by a particular FTP application, or Telnet connections, or web page retrievals from a particular server (Petri...
Words: 993 - Pages: 4
...Wikipedia for FREE on the Airtel Network! Last edited 18 hours ago by Kvng IP address For the Wikipedia user access level, see Wikipedia:User access levels#Unregistered_users. An Internet Protocol address (IP address) is a numerical label assigned to each device (e.g., computer, printer) participating in a computer network that uses the Internet Protocol for communication.[1] An IP address serves two principal functions: host or network interface identification and location addressing. Its role has been characterized as follows: "A name indicates what we seek. An address indicates where it is. A route indicates how to get there."[2] The designers of the Internet Protocol defined an IP address as a 32-bit number[1] and this system, known as Internet Protocol Version 4 (IPv4), is still in use today. However, due to the enormous growth of the Internet and the predicted depletion of available addresses, a new version of IP (IPv6), using 128 bits for the address, was developed in 1995.[3] IPv6 was standardized as RFC 2460 in 1998,[4] and its deployment has been ongoing since the mid-2000s. IP addresses are binary numbers, but they are usually stored in text files and displayed in human-readable notations, such as 172.16.254.1 (for IPv4), and 2001:db8:0:1234:0:567:8:1 (for IPv6). The Internet Assigned Numbers Authority (IANA) manages the IP address space allocations globally and delegates five regional Internet registries (RIRs) to allocate IP address blocks to local Internet...
Words: 660 - Pages: 3
...detailed design of a simple addressing solution (with diagram(s) and step by step workout of the calculations) that leaves room for growth is easy to administer and has the minimum wastage of available IP address space. Answer:- NAT (Network address translation) is a process by which a router can provide IP address to the computers. NAT is a process by which it allocates the IP address to a system, after remapping it with the network in a private area, so that one IP address could be allocated to one system, and the same IP address range will be used to connect all the computer system in one location. In this case study one building will have one router; the router is a networking device which provides IP address to its connected device in order to connect the...
Words: 1489 - Pages: 6
...Expert Reference Series of White Papers The OSI Model: Understanding the Seven Layers of Computer Networks 1-800-COURSES www.globalknowledge.com The OSI Model: Understanding the Seven Layers of Computer Networks Paul Simoneau, Global Knowledge Course Director, Network+, CCNA, CTP Introduction The Open Systems Interconnection (OSI) model is a reference tool for understanding data communications between any two networked systems. It divides the communications processes into seven layers. Each layer both performs specific functions to support the layers above it and offers services to the layers below it. The three lowest layers focus on passing traffic through the network to an end system. The top four layers come into play in the end system to complete the process. This white paper will provide you with an understanding of each of the seven layers, including their functions and their relationships to each other. This will provide you with an overview of the network process, which can then act as a framework for understanding the details of computer networking. Since the discussion of networking often includes talk of “extra layers”, this paper will address these unofficial layers as well. Finally, this paper will draw comparisons between the theoretical OSI model and the functional TCP/IP model. Although TCP/IP has been used for network communications before the adoption of the OSI model, it supports the same functions and features in a differently layered arrangement...
Words: 2594 - Pages: 11